ASUS Shows Off FM2+ Motherboards Compatible With AMD Kaveri APUs

Subject: Motherboards | July 28, 2013 - 07:40 PM |
Tagged: hUMA, Kaveri, hsa, fm2, asus, APU, A88X, A55, PCI-E 3.0, mATX

ASUS recently announced two new socket FM2+ motherboards that are compatible with AMD’s upcoming “Kaveri” Accelerated Processing Units (APUs). The new boards are the A88XMA and A55BM-A/USB3 and use the A88X and A55 AMD chipsets respectively. Pricing and availability have not yet been released, but the new boards confirm that users will need new motherboards in order to take advantage of AMD’s next generation APUs (though the new FM2+ boards are backwards compatible with the existing APUs, it will not work the other way around). Both motherboards should be available around the time of the Kaveri processor launch (2H 2013).

ASUS A88XMA Kaveri Motherboard (2).jpg

The AMD A88XMA FM2+ Motherboard.

Both the ASUS A88XMA and A55BM-A/USB3 motherboards come in the mATX form factor. The boards both have FM2+ processor sockets and expansion slots including a single PCI-E 3.0 x16 slot, one PCI-E 2.0 x1 slot, and one legacy PCI slot. The support for PCI-E 3.0 is new for AMD motherboards, and the extra bandwidth may prove useful for as graphics cards get faster and AMD works on its hUMA and HSA architectures to create a layer of virtual memory that can be simultaneously addressed by CPUs and GPUs. There will still be latency to deal with over the PCI-E bus, but more data can be moved back and forth in the same amount of time.

ASUS A88XMA Kaveri Motherboard Rear IO.jpg

The two ASUS FM2+ motherboards also share the same rear IO options, which include:

  • 2 x PS/2
  • 3 x Video outputs:
    • 1 x HDMI
    • 1 x DVI
    • 1 x VGA
  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x Gigabit Ethernet
  • 3 x Analog audio jacks

The RJ45 jacks are backed by a Realtek 8111G Gigabit Ethernet controller and the audio jacks are handled by a Realtek ALC887-VD chipset. Finally, they also have UEFI BIOSes in common, but from there the two boards diverge in hardware capabilities.

The ASUS A88XMA is the higher-end of the two boards, and features a FM2+ socket, four DDR3 DIMM slots, and six SATA 3 6Gbps ports. It utilizes the AMD A88X chipset which is aimed at enthusiast platforms.

ASUS A55BM-AUSB3 Kaveri Motherboard.jpg

ASUS' A55BM-A/USB3 budget motherboard.

On the other hand, the A55BM-A/USB3 motherboard uses the cheaper A55 chipset. That motherboard features an FM2+ socket, two DDR3 DIMM slots, and six right angle SATA 2 3Gpbs ports. The A55Bm-A/USB3 should be significantly cheaper as a result of the A55 chipset and resulting hardware reductions. In most other respects, ASUS has managed to make the two baords remarkably similar, including aesthetics and basic board layout.

According to Bit-Tech, the two boards are are part of a larger family of boards with the new FM2+ sockets. As such, we should see additional ASUS boards that fill in the gaps between the two models closer to AMD's Kaveri launch. As noted above, ASUS has not provided official pricing or release date information yet.

Source: Bit-Tech

Hardware Flashback: Asus P2B

Subject: Motherboards | July 17, 2013 - 08:34 PM |
Tagged: Pentium II, Pentium !!!, pentium, P2B, Intel, hardware flashback, asus, 440 BX

Retro hardware is so much fun.  Today we have the Asus P2B, and while it was not a game changer for the time, it was a popular board.  This popularity sprang from its excellent compatibility with older Pentium II processors and a wide variety of AGP cards.  It was one of the last series of boards that Asus released that did not feature the jumperless BIOS options that we take for granted these days.

p2b_01.jpg

3 ISA ports staring us in the face!  ATA-33?  Oh yeah!

There are some things that really spring out when looking at the board.  Having 3 ISA slots seems pretty much overkill as most people used perhaps two of them (modem and sound card), but I can see this being popular with people who also utilize older SCSI cards (such as those used with scanners of the time).  Having 3 ISA meant that there were only 4 PCI slots.  Remember, ISA and PCI slots situated next to each other would share the same backplate slot, so PCI and ISA could not be used adjacent to each other.  Remember as well that we often saw issues with the first PCI slot as it shared resources with the AGP slot.  This essentially gives only two usable PCI slots if a user was full up on ISA cards.

The board features 3 DIMM slots at a time when it was popular to use a buffer chip to allow up to four DIMM slots.  These buffer chips were often a big performance hit in memory operations and they quickly fell out of favor with most enthusiasts and power users.  Having 3 DIMM slots did lower the maximum potential installed memory, but not by all that much.  The performance benefits of slightly less memory but better performance often outweighed having that fourth DIMM.

p2b_02.jpg

These old boards look so bare even compared to current low-end motherboards.  Excellent for someone who needs two serial ports, though!

The BX boards supported the 100 MHz bus speed for the latest Pentium IIs and upcoming Pentium !!!s.  This particular board was quite popular with people that had older Pentium IIs with the 66 MHz FSB.  Running these at 3 x 100 or 3.5 x 100 would give a nice overall boost for these aging processors.  Users who were early implementers of Pentium II CPUs were stuck with the old 440FX chipset which did not feature SDRAM or AGP support.  This would have been a nice upgrade in performance and functionality for those users as they could pop in their Pentium II 266 or 300 and tweak their way to performance nirvana.

This board was released before we saw the change to the colored peripheral connections, so every plug on the back of the board is black.  Color coding was for wimps anyway.  It also does not include integrated sound.  So there goes one of those ISA slots.  Users of the time would have probably installed a soundcard, modem, PCI Ethernet card, and their AGP card.  So where would the Voodoo 2 go?  How about two of them?  Things would get awful crowded very quickly.

p2b_03.jpg

That dust may or may not have been deposited around 1999...

The AGP support on these boards was of course excellent.  That is primarily because Intel was the main driver of the specification and everyone else developed their cards to run in these slots.  VIA, SiS, and others of course had compatibility issues with a wide variety of cards.  This is why we saw other folks like 3dfx make their products run at below AGP specs.  For instance, the Voodoo 3 was essentially a PCI 66 MHz device in the AGP slot.  This disabled features like sideband addressing and reading textures from main memory.

This was still a popular board even in the face of competition with superior features.  The Asus brand and name goes far.  Plus it was a fast board for the time that was a bit no-frills.  Recipe for success?  I guess so.  This particular board and CPU were running in a homebuilt server for around 10 years until it was replaced.  I guess it was money well spent.

Source: Asus

MSI's Z87-GD65 Gaming is a brilliant board at a reasonable price

Subject: Motherboards | July 15, 2013 - 02:46 PM |
Tagged: Z87-GD65 GAMING, z87, msi

At just under $200 the MSI Z87-GD65 Gaming offers great value and performance for someone building a Haswell based system.  It has all of the current features you expect from a high end board from MSI such as OC Genie 4, Military Class 4 components, super ferrite chokes, Hi-C Capacitors, Dark Caps and a Killer NIC.  [H]ard|OCP was also very glad to see the end of MSI's ClickBIOS and were much happier with the new UEFI BIOS that MSI is using on their new boards.  With three PCIe 16x slots you can utilize multiple GPUs and 10 SATA 6Gbps ports ought to satisfy almost any user.  It picked up a Gold Award from [H] and you can see why in the full review.

If you missed Morry's review of this board you can get it right here.

H_gd65.jpg

"MSI’s GAMING series is back with an all new entry. The Z87-GD65 GAMING is certainly a promising contender and is one of the more unique offerings we’ve seen from MSI. We liked the last GAMING board we looked at, and we have liked all previous GD-65 series motherboards, hopefully this followup entry can measure up."

Here are some more Motherboard articles from around the web:

Motherboards

Source: [H]ard|OCP

ASRock Announces Mini ITX H87E-ITX/ac LGA 1150 Motherboard

Subject: Motherboards | July 13, 2013 - 01:50 AM |
Tagged: lga 1150, Intel, haswell, H87, asrock, 802.11ac

ASRock has announced a new Mini-ITX form facotr motherboard for Intel’s latest Haswell processors (LGA 1150). It utilizes the H87 chipset and should be a good board for enthusiasts looking to build a SFF machine.

ASRock H87E-ITXac Mini ITX Motherboard.jpg

The H87E-ITX/ac features a LGA 1150 socket powered by a 4-phase DrMOS VRM, two DDR3 DIMM slots (maximum of 32GB), and a single PCI-E 3.0 x16 slot. Storage is handled by six SATA III 6Gbps ports located between the CPU socket and PCI-E slot. The board uses an Intel i217V chipset for the 802.11ac WLAN and an Intel Gigabit Ethernet NIC. A Realtek ALC1150 chipset handles the audio duties.

ASRock H87E-ITXac Mini ITX Motherboard Rear IO.jpg

Rear IO on the H87E-ITX/ac includes:

  • 1 x PS/2
  • 2 x USB 2.0
  • 1 x DVI
  • 1 x DisplayPort
  • 1 x HDMI
  • 4 x USB 3.0
  • 1 x Gigabit Ethernet RJ45 jack
  • 1 x eSATA III
  • 1 x S/PDIF
  • 5 x Analog audio jacks

The rear IO also has two antenna connectors for the 802.11ac Wi-Fi card. ASRock includes an antenna but users should be able to use any third party antennas as it uses standard connectors.

ASRock has not yet released pricing or availability information, but you can find additional specifications and photos on this product page. I would wait for reviews, but it looks to be a decent board, and if the price is right it should be a popular option for SFF desktops and HTPC builds.

Source: ASRock

Breaking Limitations! CPU OC on ECS H87, B85, and H81 Motherboards

Subject: General Tech, Motherboards | July 5, 2013 - 03:25 PM |
Tagged: elitegroup, ECS, H87, B85, H81

ECS has some great news for those who want to upgrade to Haswell but aren't able to afford one of the high end Z87 motherboards.  They've announce three motherboards all designed with overclocking in mind.  If you save a bit on the motherboard you can use those savings to pick up a faster 'K' model to put in your motherboard!

2013/7/5 Taipei, Taiwan – Now you don’t necessarily need K-Series CPU along with Z-Series chipset to experience the joy of overclocking. ECS recently announced that ECS motherboards with all Intel® 8 Series chipset, including H87, B85, and H81, have the CPU overclocking ability, giving non Z-Series motherboard users an additional benefit of CPU overclocking performance.

ECS has achieved the Non-Z Series CPU overclocking with H87, B85, and H81 motherboards by simply adjusting the CPU Ratio in BIOS setting, offering an extremely easy way of performing CPU overclocking. More importantly, H87, B85, and H81 CPU overclocking ability provides an affordable solution for all different levels of overclockers.

H87

H87.png

B85

b85.png

H81

h81.png

 

Source: ECS

Gigabyte's Z87X-UD5H has a lot going for it, but perhaps it could do better

Subject: Motherboards | July 2, 2013 - 02:06 PM |
Tagged: gigabyte, z87, Z87X-UD5H

Gigabyte's new Z87X-UD5H is more than just a chipset refresh, they've included 12 phase digtial power, fuses and ESD protection on the USB ports as well as high quality ICs and long life capacitors.  The board can handle multiple GPUs on its two PCIe 16x slots, running at 8x when both are populated and additionally has a 4x and three 3x slots for any other cards you might want to install.  A brand new UEFI offers an attractive interface but [H]ard|OCP were not as impressed with some of the functionality of the new UEFI on the board.  Check out their full review here.

H_gigz87.jpg

"Gigabyte brings a lot to the test bench with the Z87X-UD5H. New UEFI, New Easy Tune software, and a whole lot more. Gigabyte is facing some very tough competition based on what we’ve seen from other manufacturers. Does Gigabyte still have what it takes to compete? Let’s find out."

Here are some more Motherboard articles from around the web:

Motherboards

Source: [H]ard|OCP

EVGA Announces Flagship X79 Dark LGA 2011 Motherboard

Subject: Motherboards | July 1, 2013 - 03:50 PM |
Tagged: x79 dark, x79, lga 2011, evga

EVGA has announced a new flagship LGA 2011 motherboard called the X79 Dark. The new motherboard is E-ATX and measures 304.8 x 263.5mm. It features a 12 layer PCB, new UEFI BIOS, and a number of enthusiast and overclocking-friendly features.

EVGA X79 Dark LGA2011 Motherboard.jpg

The motherboard features a 12+2 VRM for the CPU, and a 4 phase VRM for the memory. The board has a single LGA 2011 processor socket surrounded by four DDR3 DIMM slots on either side and a large hexagonal heatsink for the VRM above it. Below the CPU socket, EVGA has included five PCI-E 3.0 x16 slots and a single PCI-E 3.0 x4 slot. All of the physical PCI-E 3.0 x16 slots are at least electrically x8, and two of them are electrically x16. The bottom-right corner of the motherboard is taken up by a massive PCH heatsink with a large red EVGA logo. To the right of the PCH heatsink, the board has 10 SATA ports at right angles to the board PCB. Six of the SATA ports are SATA III 6Gbps and four of them are SATA II 3Gbps.

Of course, the board has Intel Ethernet controllers, 8 channel audio, and internal headers for two additional USB 3.0 ports. The board requires one 24-pin, two 8-pin, and one 6-pin PCI-E power connectors to supply power to the board and connected components. Finally, EVGA has also included EVBot voltage measurement points along with an updated UEFI BIOS.

EVGA X79 Dark LGA2011 Motherboard UEFI Motherboard.jpg

The EVGA X79 Dark has a fairly extensive external IO panel, which includes:

  • 6 x USB 2.0
  • 1 x Bluetooth
  • 4 x USB 3.0
  • 2 x eSATA 3Gbps
  • 5 x Analog audio jacks
  • 1 x S/PDIF
  • 2 x Gigabit Ethernet ports (Intel NICs)

The new LGA 2011 X79 Dark motherboard is model number 150-SE-E789-KR and will be available soon for $399.99.

ASUS ROG Maximus VI Extreme Dominates Computex Overclocking Event, Used to Break Eight World Records

Subject: Motherboards | June 26, 2013 - 02:49 PM |
Tagged: overclocking, computex 2013, ASUS ROG, ASUS Maximus VI Extreme, asus

During Computex 2013 in Taipei, Taiwan, Intel and Corsair sponsored the Computex OC Main Event where overclockers set out to push some of the latest hardware to the max. The ASUS Maximus VI Extreme motherboard was one of the pieces of hardware used at this event, and it was the board used in 10 out of 11 winning overclocking runs. Further, it was used in runs that ended up breaking a total of 8 world overclocking records.

PR ASUS Maximus VI Extreme took ten out of eleven wins at the Intel and Corsair Computex OC Main Event .jpg

Overclockers were able to achieve top spots for a number of benchmarking scores as well as CPU and GPU clockspeeds. The benchmarking records include new high scores for 3DMark01, 3DMark05, 3DMark06, SuperPi 32M, PiFast, and AquaMark3. The overclockers were also able to push an Intel "Haswell" Core-i7 4770K processor to an impressive 7092.68 MHz with HyperThreading disabled and two physical cores active. Considering how stubborn the new Haswell chips are when it comes to overclocking, hitting a bit over 7GHz is quite the feat. CPUs were not the only pieces of hardware that were pushed to the limits, however. Overclockers were also able to overclock four DDR3 DIMMs to 3957 MHz with 13-16-16-45 timings.

Left: CPU Overclock. Right: RAM Overclock. Click on image(s) for a larger version.

The breakdown of the new top benchmarking scores for the various software used at the OC Main Event (from systems using the ASUS Maximus VI Extreme board, Haswell CPU, and GTX TITAN) is listed below.

Benchmark/Overclocking Feat Score/Clockspeed
3DMark01 186,758
3DMark05 73,316
3DMark06 56,041
SuperPi 32M 4m, 35s, 406ms
PiFast 9.78s
AquaMark3 571,570
Haswell Clockspeed 7092.68 MHz (two cores)
DDR3 Clockspeed 3957 MHz (13-16-16-45)

Naturally, ASUS is extremely pleased with the performance of its new motherboard, which proved stable enough to support some impressive CPU, GPU, and RAM overclocking under LN2 and extreme clockspeeds. I'm looking forward to see what Morry is able to achieve using the board in a more real world 24/7 overclock scenario in our upcoming OC review using this ASUS board!

Check out our full review of the ASUS ROG Maximus VI Extreme (overclocking performance details coming soon, as per the new review format).

Source: ASUS

ECS Reveals its First Motherboard with the AMD Kabini - KBN-I

Subject: Motherboards | June 19, 2013 - 02:10 PM |
Tagged: SoC, KBN-I, Kabini, ECS, A6-5200

ECS' new KBN-I board simply needs you to add some RAM and storage to become a fully functional computer.  The integrated 2.0Ghz A6-5200 with its accompanying HD 8400 graphics are enough power for general computing duties and perhaps even newer titles if you turn the settings down somewhat. If you do plan on gaming there is a PCIe 3.0 16x slot for an expansion card, though you might be better served with a TV capture card instead of a graphics card.   

kbn_color.png

19th Jun 2013, Taipei, Taiwan - Elitegroup Computer Systems (ECS) reveals its latest Mini-ITX motherboard family-KBN-I-featuring the world 1st Quad Core SoC (system-on-a-chip) processor with the newest “Jaguar” 28 nanometer architecture. The ECS KBN-I is integrated AMD Quad Core A6-5200 APU with AMD Radeon HD 8400 Graphics, support new generation DirectX 11.1 graphics, and offer 50% longer battery life performance. The ECS KBN-I with official Windows 8 WHCK certification (Windows Hardware Certification Kit) allows users to take full advantage of the touch browser and function-oriented design of Windows 8. The NM70-I is optimized for home, general computing productivity and multimedia applications.

Up to 25% More Power Efficiency
Designed to save space and energy, the ECS KBN-I is the ideal solution for small-form factor systems, with the AMD Kabini Quad Core SoC processor and maximum of 25W low power consumption. It improves a better power efficiency with up to 25% more power efficiency thru clock gating and unit redesign compared with current generation low power platform. Thanks to new generation design of increasing the amount of core, instructions per clock(IPC), and boost clock speed, the ECS KBN-I reducing energy usage by operating at lower frequencies when performance is not necessary. The ECS KBN-I also has 9W fanless Heat Sink design, full electrostatic discharge protection and 100% solid capacitors to maximize the reliability and longevity of your system.

Excellent Extension Support
Even with the mini-ITX size of the KBN-I, ECS has kept in mind the expansion needs of future-proof minded customers. The ECS KBN-I supports video and storage upgrades with 1 x PCI-E x16, 2 x SATA 6GB/s connections, 2 x USB 3.0 ports and 4 x USB 2.0 ports. For industrial applications, the KBN-I is equipped with Serial port output (COM). The Mini-PCIe slot is designed for laptops and other small-footprint computer systems and supports Mini-PCI card (one full-card and one half-card) for mini-Wireless, mini-TV tuner and so on. Moreover, users can enjoy high definition media as the KBN-I support HD 1080p output including HDMI and standard analog D-Sub VGA output. The NM70-I is bundled with additional software including Norton anti-virus, Muzee, Cyberlink Media Suite, and the ECS iEZ utility, which combines eBLU BIOS Live Update Utility, eDLU Drivers Live Update Utility and the eSF Smart Fan Utility.

Source: ECS

The ASUS Z87-A, short name but long on features

Subject: Motherboards | June 17, 2013 - 06:14 PM |
Tagged: asus, z87, Z87-A

You have a lot of choice in motherboard if you are thinking of moving up to Haswell as there are a huge amount of models available.  At their core the different implementations of the Z87 are very similar, it is the materials used for construction and the add-ons which make a board stand out.  ASUS added 5k long life capacitors, rust proofing on the I/O panel, the new Realtek ALC1150 onboard audio and an ASMedia USB controller to increase the number of available ports, to name just a few features. Head over to [H]ard|OCP for the performance review of the $150 ASUS Z87-A motherboard.

H_asusz87a.jpg

"We start today with reviewing new Z87 chipset motherboards, which we will surely see a lot of, with ASUS' new Z87-A motherboard. Before we even got the box open we had to stop for a second and enjoy the simplicity of the name. But don't let the name fool you. There is plenty going on here to keep your enthusiast attention."

Here are some more Motherboard articles from around the web:

Motherboards

Source: [H]ard|OCP

Computex 2013: Gigabyte Shows Off GA-990FXA-UD7 AM3+ Motherboard That Hints At 5GHz AMD FX Processor

Subject: General Tech, Motherboards | June 5, 2013 - 02:13 PM |
Tagged: gigabyte, ga-990fx-ud7, computex 2013, computex, amd fx, amd, am3+

Gigabyte is showing off quite a few motherboards at Computex 2013. One of the most interesting motherboards on display is the GA-990FX-UD7 for AMD AM3+ desktop processors. This is a high-end motherboard for enthusiasts and is packed with features.

The GA-990FX-UD7 features an 8+2 power phase, AM3+ CPU socket, four DDR3 DIMM slots, six PCI-E 2.0 x16 (physical) slots, one legacy PCI slot, and eight SATA 3 6Gbps ports. It has a black and glossy orange color scheme with large finned heatsinks around the CPU socket and over the southbridge. The board uses a Realtek ALC889 chipset for onboard audio that supports Dolby Home Theater and has a 108dB SNR rating. Further, the GA-990FX-UD7 supports 4-way SLI or CrossFire, Gigabyte's UEFI DualBIOS, and 3X power which allows faster battery charging for supported USB-connected mobile devices.

Gigabyte GA-990FXA-UD7 AM3Plus Motherboard.jpg

The Gigabyte GA-990FX-UD7 at Computex 2013 as spotted by Sweclockers (Click for larger image).

Rear IO includes a single coaxial S/PDIF and six analog audio outputs, four USB 3.0 ports, two eSATA+USB combo ports, and a RJ45 LAN jack.

Interestingly, Gigabyte's Computex display mentions that the new AM3+ motherboard is compatible with AMD's 5GHz AM3+ processor, which lends credibility to previous rumors of a Piledriver-based eight core “Centurion” AMD FX processor clocked at 5GHz with a 220W TDP. That chip was rumored for a summer 2013 release in limited quantities, and it looks like enthusiasts might be able to get their hands on that chip later this year after all!

Gigabyte GA-990FXA-UD7 AM3Plus Motherboard Specifications.jpg

Although AMD is not talking, Sweclockers has managed to put together a list of preliminary specifications for the codenamed Centurion processor. Rumors have it that the Centurion chip will be officially named the AMD FX-9000, and that it is a 4-module, 8-core part with a 4.8 GHz base clock and 5.0 GHz turbo clockspeed. It has a total of 8MB L2 cache, and 8MB of L3. Further, this 220W TDP part will support a maximum of DDR3-1866 (officially, before overclocking) and is build on AMD's 32nm SOI HKMG manufacturing process. You will need a beefy air cooler at the minimum to keep this chip happy, but otherwise it should be a fun chip for enthusiasts to tinker with!

Source: Sweclockers

Computex 2013: MSI Launches New Gaming and Overclock Series Motherboards

Subject: Motherboards | June 5, 2013 - 02:17 AM |
Tagged: Z87-GD65 GAMING, uefi, overclocking, msi, haswell, computex 2013, computex

MSI announced new Z87 motherboards today, ready to accept Intel's new 4 Generation Core "Haswell" processors. The new Z87 boards are broken up into the company's "GAMING" series and a new "Overclock" series. Both boards use Military Class IV components that are MIL-STD-810G rated.

The MSI Z87-GD65-GAMING is the company's latest motherboard aimed at PC gamers. It incorporates a Killer NIC and the company's Audio Boost technology. It also supports MSI technology such as V-Check points (to get voltage readings with multi meter), Super RAID, Multi-BIOS II, and Go2BIOS.

MSI Z87-GD65 GAMING.jpg

On its face, the Z87-GD65-GAMING features an Intel LGA 1150 CPU socket, four DDR3 DIMM slots, eight SATA 6Gbps ports, three PCI-E 3.0 x16 slots, and four PCI-E 3.0 x1 slots. Rear IO includes a PS/2 port, two USB 2.0 ports, four USB 3.0 ports, coaxial and optical S/PDIF audio outputs, one DVI port, one VGA port, one HDMI output, one Kill NIC-backed Gigabit LAN port, and six analog audio jacks.

The MSI Z87-GD65-GAMING motherboard is currently selling for around $189 at various online retailers. It has earned a Computex 2013 Best Choice Gold award as well as a positive review from PC Perspective's resident motherboard guru Morry Teitelman. You can find our full review of the gaming motherboard here.

MSI also announced three new motherboards under its Overclock series. These boards are intended for PC enthusiasts who like to tinker with hardware and push their chips (CPU and GPU) as far as possible. The new boards include the Z87 MPOWER, Z87 MPOWER MAX, and Z87 XPOWER.

Click BIOS 4.jpg

The Overclock series motherboards also use Military Class components. They also feature MSI's latest Click BIOS 4 UEFI and Control Center software that allows monitory, tuning, and remote controlling of your PC. The MSI Overclock boards also have a tool that allows for automatic overclocking called OC Genie 4 that reportedly operates in two stages. The Z87 MPOWER has a 32-phase digital power system, supports DDR3-3000 memory, and supports 4-way SLI or Crossfire. The MPOWER MAX and XPOWER motherboards are OC (Overclock) Certified and supports MSI's Extreme Tuning Utility for overclocking within Windows.

Rear port layout is similar to the Z87-GD65-Gaming motherboard, except that the new MPOWER boards add a removable Intel Wi-Fi + Bluetooth card that adds 802.11g/g/n Wi-Fi, Bluetooth 4.0, and Intel WiDi (Wireless Display) technology. The highest-end Z87 MPOWER, the XPOWER board, also has additional USB 3.0 ports on the back panel.

You can find more information on the Z87 MPOWER motherboards on this MSI product page.

Also read: MSI Launches 17" GS70 Gaming Notebook @ PC Perspective.

Source: MSI

PCPer Live! ASUS Z87 Motherboard and Intel Haswell Live Event!

Subject: Editorial, General Tech, Motherboards, Processors | June 4, 2013 - 10:40 AM |
Tagged: z87, video, overclocking, live, i7-4770k, haswell, ASUS ROG, asus

While we run around with our hair on fire trying to get ready for the Intel Haswell and Z87 product launch this weekend, I wanted to let everyone know about a live stream event we will be holding on Tuesday, June 4th.  JJ from ASUS, a crowd favorite for sure, will be joining us LIVE in studio to talk all about the new lineup of ASUS Z87 motherboards.  We'll also discuss performance and overclocking capabilities of the new processor and platform.

rog1.jpg

ASUS Z87 and Haswell Live Stream

10am PT / 1pm ET - June 4th

PC Perspective Live! Page

Be sure you stop by and join in the show!  Questions will be answered, prizes will be given out and fun will be had!  Who knows, maybe we can break some stuff live as well??  On hand to give away to those of you joining the live stream, we'll have these prizes:

  • 2 x ASUS Z87 Motherboards
  • 1 x ASUS Graphics card

Methods for winning will be decided closer to the event, but if you are watching live, you'll be included.  And we'll ship anywhere in the world!

pcperlive2.png

ASUS and I also want the event to be interactive, so we want your questions.  We'll of course being paying attention to the chat room on our live page but you'll have better luck if you submit your questions about the ASUS Z87 products and Haswell processors before hand, in the comments section below.  You don't have to register to ask and we'll have the ability to read them beforehand! 

I'll update this post with more information after the reviews and stories start to hit, so keep an eye here for more details!!

Computex 2013: ASUS Reveals New ROG Gaming and Overclocking Hardware

Subject: General Tech, Motherboards, Systems, Shows and Expos | June 4, 2013 - 04:36 AM |
Tagged: z87, ROG, Maximus VI Formula, maximus vi, Intel, haswell, gaming, g30, crosschill, computex 2013, computex, asus

During an ASUS ROG press conference at Computex 2013 in Taipei, Taiwan, ASUS launched a number of new bits of hardware aimed at PC gamers and overclocking enthusiasts. In addition to the mini ITX Maximus VI Impact launch, ASUS showed off the ASUS Maximus VI Formula motherboard, OC Panel accessory, and ROG G30 desktop. The available details on each piece of hardware is as follows:

ASUS Maximus VI Formula Motherboard

While ASUS hinted at several of its Z87 motherboards last month by allowing us to post teaser photos ahead of the launch, until today enthusiasts have not seen the latest "Formula" motherboard. However, now that the board is official, you can see the new Z87 motherboard in high resolution photos below!

ASUS Maximus VI Formula Z87 Motherboard with SupremeFX and CrossChill.jpg

The board comes in red and black colors, and surprisingly, comes equipped with ASUS' thermal armor accessory which includes a plastic shroud for the front of the motherboard and a SECC back-plate with thermal pads to aid in cooling and supporting the motherboard (even with heavy CPU HSFs). In addition to the thermal armor, the board has finned heatsinks on the PCH and VRM hardware. The VRM heatsink in particular uses the company's CrossChill technology which allows user to integrate the VRM heatsink into their water cooling loop or leave it as air-cooled. The board also features a diagnostic display and start/reset buttons.

The ASUS Maximus VI Formula features a LGA 1150 CPU socket, four dual channel DDR3 DIMM slots, three PCI-E 3.0 x16 slots, three PCI-E 3.0 x1 slots and a total of 10 SATA 3 6Gbps ports.

ASUS_ROG_Maximus_VI_Formula_with_ROG_Armor.jpg

The rear IO panel includes a mPCI-E Combo II card that supports 802.11ac and Bluetooth 4.0 wireless radios along with a M.2 NGFF (Next Generation Form Factor) SSD slot at the top. Other IO includes:

  • 4 x USB 2.0 ports (one used for BIOS flashing)
  • 6 x USB 3.0 ports
  • 2 x HDMI video outputs
  • 1 x S/PDIF connector
  • 1 x RJ45 Gigabit LAN
  • 6 x analog audio jacks

Overclocking technology includes ASUS' Extreme Engine DIGI+ III power delivery that incorporates 60A BlackWing chokes, (90% efficient) NexFET MOSFETs, and 10K Black Metallic capacitors.

Finally, ASUS has also added a SupremeFX chipset for quality onboard audio. This audio chip is capable of 120dB SNR, a headphone amplifier for 600 ohm cans, EMI shielding, and quality OpAMPs.

ASUS OC Panel Overclocking Accessory

The ASUS OC Panel is a hardware accessory for the company's ROG Maximus VI Extreme motherboard. It allows you to adjust the BCLK and other settings related to overclocking your processor in real time. It also provides CPU temperature feedback on the top of the LED display.

ASUS_ROG_Maximus_VI_Extreme_with_OC_Panel_Extreme_Mode.jpg

According to the press release, overclockers Andre Yang and Shamino managed to push a system with a Maximus VI Extreme motherboard, 32GB RAM, and a Core-i7 Haswell processor to 7GHz CPU and 4200MHz clockspeed using liquid nitrogen cooling. It looks like a cool accessory that will allow you to easily adjust the overclocking settings without rebooting into the UEFI BIOS. Pricing and availability have not been announced, but expect it soon.

ASUS ROG G30 Gaming Desktop

The ROG TYTAN G30 desktop PC features a stylized case with red LEDs and a front door with ROG and ASUS logos. Internals include an Intel Core i7 4770K "Haswell" processor and a NVIDIA GTX 780 graphics card. Even better, ASUS is using liquid cooling for the CPU, and offers a 1-button overclock of all four CPU cores to 4.1GHz. The PC also integrates ASUS' SonicMaster and AudioWizard technology which reportedly enhances in-game audio.

ASUS_ROG_G30_Gaming_Desktop_PC_with_ROG_AudioWizard.jpg

Again, pricing and availability for the haswell gaming PC are still unknown.

What do you think of ASUS' recent ROG product announcements? Stay tuned to PC Perspective for more Computex 2013 news throughout the week!

Also read:

Source: ASUS

Computex 2013: ASUS Unveils First Mini-ITX ROG Motherboard: The Z87 Maximus VI Impact

Subject: Motherboards | June 4, 2013 - 03:12 AM |
Tagged: ROG, mini-itx, mini ITX, maximus vi impact, maximus vi, computex 2013, computex, asus

ASUS held a Republic of Gamers press conference earlier today that focused on new product announcements for its ROG brand. Among the new ROG gear was the company's first Mini-ITX ROG motherboard with the ASUS Maximus VI Impact motherboard.

ASUS Maximus VI Impact Mini-ITX Z87 Motherboard.jpg

This board may be tiny, but it is packed with features and overclocking-friendly hardware! This Mini-ITX motherboard is clad in the red and black ROG color scheme and features ASUS' Impact Power add on card that takes the VRMs and other electrical regulation hardware up off of the mainboard and into a separate add in card above the CPU. This Impact Power riser card includes a 8+2 digital power phase for both the CPU and memory. The board also includes a SupremeFX Impact sound card and a mPCIe Combo II card. The SupremeFX Impact module uses ELNA audio capacitors and features a headphone amplifier and 115dB SNR (Signal-to-Noise Ratio). Further, the mPCIe Combo II card provides a NGFF (think of this as next-generation mSATA) slot as well as 802.11ac Wi-Fi and Bluetooth 4.0 wireless radios.

ASUS_ROG_Maximus_VI_Impact_Mini-ITX_Motherboard.jpg

Apart from the bundled ASUS cards, the board provides a single PCI-E 3.0 x16 slot, two DDR3 memory slots, four SATA 3 ports, and (of course) the LGA 1150 CPU socket ready to accept an Intel Haswell processor. The board comes with a standard 24-pin ATX and 8-pin CPU power connectors.

The rear IO panel includes:

  • 2 x HDMI
  • 1 x S/PDIF
  • Impact Control and BIOS reset buttons
  • 4 x USB 2.0
  • 1 x eSATA
  • 4 x USB 3.0
  • 1 x RJ45 Gigabit Ethernet
  • 3 x Audio jacks (via SupremeFX sound card)

ASUS has not yet announced pricing or availability for this Mini-ITX Maximus VI Impact motherboard, but it looks like a solid board and I am anxious to see how well it overclocks!

Also read: ASUS Z87 Motherboard Lineup Preview @ PC Perspective.

Source: ASUS

An avalanche of Haswell motherboards

Subject: Motherboards | June 3, 2013 - 07:15 PM |
Tagged: z87, socket 1150, Q87, Q85, haswell, H87, B85

Somehow the gang at Hardware.Info made it through 33 different Socket 1150 boards in time for the release date, not just Z87 but also H87, Q87, Q85 and B85 based boards from the five major motherboard suppliers.  They also tested 22 different USB 3.0 devices on the boards and saw errors generated in over half of the devices, something you should take note of if you plan to upgrade immediately.  The benchmark charts are something to behold, though the performance holds relatively stable on all of the boards showing that once again it is the features which make a board stand out against the competition.  There was one measure that separated the boards, power consumption varies greatly between these motherboards, attributable in no small part to the aforementioned features.

Hinfo_z87-roundup-1.jpg

"Today Intel introduced the fourth generation of its Core processors, also known as Haswell. The desktop processors in the Haswell generation use a different type of processor socket, called Socket 1150. That means if you want to use one of the new processors, you will have to buy a new motherboard as well. Intel also created a new chipset series, the 8 series or Lynx Point, for desktop motherboards: the Z87, H87, Q87, Q85 and B85. Hardware.Info tested 33 of these new Socket 1150 Haswell motherboards, 26 with the Z87 chipset, four with H87 and three with B85. ASRock, ASUS, Gigabyte, Intel and MSI participated."

Here are some more Motherboard articles from around the web:

Motherboards

Can't get enough Z87 previews!

Subject: Motherboards | May 31, 2013 - 05:41 PM |
Tagged: z87, asus, preview, Maximus VI Hero, Sabertooth Z87, TUF Gryphon

Previews of the upcoming Z87 boards from all the major manufacturers are appearing everywhere as the release date draws nigh, to the joy of tech enthusiasts everywhere.  ASUS was kind enough to give The Tech Report a breakdown of their upcoming boards, both full sized and mATX.  One of the more intriguing is the TUF Gryphon which has the same heatshield as the previous TUF series but is in an mATX form for those who want a powerful SFF system.  Pictured below is the new Deluxe model, The Tech Report finds the colour scheme reminiscent of a "1978 Firebird Trans Am"; perhaps you can mod a blower into your case if this is the board you chose?

shot-deluxe.jpg

"A few weeks ago, we got an early preview of Asus' upcoming Haswell motherboards. We can now tell you what's in store for the next generation."

Here are some more Motherboard articles from around the web:

Motherboards

ASUS Maximus VI Formula Supreme FX Evolution

Subject: Motherboards | May 29, 2013 - 02:08 PM |
Tagged: SupremeFX, Maximus VI Formula, Intel Z87, asus

Today, ASUS released a preview of the audio functionality to be designed into their upcoming Maximus VI Formula board. They are continuing in their evolution of the SupremeFX audio solution to deliver the best audio experience possible to the end user.

SupremeFX_Teaser.jpg

Courtesy of ASUS

Stay tuned for more information about the upcoming Intel Z87-based Maximus VI Formula motherboard and its slew of integrated features including the SupremeFX audio solution.

Source: ASUS

MSI Z87-GD65 GAMING - The No. 1 and Only Best Choice Golden Awarded Motherboard

Subject: General Tech, Motherboards | May 28, 2013 - 02:58 PM |
Tagged: Z87-GD65 GAMING, msi, z87

[May 28th, 2013/ City of Industry, California] In its 33rd year and as Asia’s largest B2B (Business to Business) computer exhibition, COMPUTEX TAIPEI 2013 is kicking off on June 4. Today, the winning list of Best Choice Award, the official award of COMPUTEX TAIPEI, is unveiled. MSI’s Z87-GD65 GAMING motherboard and Funtoro HD MOD (Media on Demand) vehicle infotainment system have proudly stood out from over 400 competitions. The only Golden Award winner in the IC & Components category, the Z87-GD65 GAMING motherboard literally sparkles in every way and proves MSI to be a true pioneer of mid-range/high-end motherboards.

The Best Choice Award has always focused on Functionality, Innovation and Market Potential as the main judging guideline. Bringing the Z87-GD65 GAMING to global gaming enthusiasts’ attention, the Best Choice Golden Award also highlights the industrial and official affirmation toward MSI’s technical innovation and design capabilities. Specifically designed for operators and passengers of long-distance coaches and high-end tour buses, the HD MOD System integrates infotainment and telematics in one pack and is clearly the top choice for multimedia entertainment on mass transportation.

z87-gd65.jpg

Z87-GD65 GAMING, the No. 1 and Only Best Choice Golden Awarded Motherboard

The Z87-GD65 GAMING motherboard is the latest joint effort of MSI and FNATIC, the world-renowned gaming champion team. Consolidating the cutting-edge Intel 8 series chipset and Killer E2205 Game Networking, the Z87-GD65 GAMING effectively eliminates latency-induced errors and automatically prioritizes game traffic. Gamers will experience smooth gameplay even in heavily loaded networks. As for sound, the innovative Audio Boost technology significantly enhances sound clarity. To give gamers the edge in speed, the OC Genie 4 one-second overclocking technology boosts the system performance in no time.

Source: MSI

MSI Z87 MPOWER Motherboard Series

Subject: Motherboards | May 25, 2013 - 12:15 AM |
Tagged: Z87 MPOWER MAX, Z87 MPOWER, z87, msi, mpower, Intel Z87

MSI unveiled their plans for the next revision of their award winning MPOWER motherboard series. With the Z87 series of boards, MSI decided to release two different versions of the MPOWER motherboard - the Z87 MPOWER and the Z87 MPOWER MAX.

z87-mpower.PNG

MSI Z87 MPOWER motherboard
Courtesy of MSI

z87-mpower-max.gif

MSI Z87 MPOWER MAX motherboard
Courtesy of MSI

Continue reading our preview of the MSI Z87 MPOWER motherboard lineup!

Source: MSI