All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Memory | January 18, 2008 - 01:38 PM | Jeremy Hellstrom
The newest in DDR2 is the OCZ PC2-6400 ReaperX HPC Enhanced Bandwidth 4GB Dual Channel kit shows the exact reason DDR2 is still going to be popular for a while. This pair of 800MHz, 4-4-3-15 timed 2GB DIMMs can be yours for $150 at NewEgg. When Overclock3D tested out the overclocking ability, the heatpipes helped them to hit DDR2-1100 speeds, and they only had to up the voltage to 2.1v, so the DIMMs are still under warantee.
Subject: Memory | January 17, 2008 - 06:36 PM | Jeremy Hellstrom
Sunnyvale, CA - January 17, 2008 - OCZ Technology Group, Inc., a worldwide leader in innovative ultra-high performance and high reliability memory, today announced the PC2-8000 Platinum Edition 4GB dual channel kit, designed to boost the performance of mainstream gaming systems. These new 2GB modules are the ultimate upgrade for entry-level enthusiasts seeking an exceptional overclocking kit at a price point that suits all budgets.
Subject: Memory | January 11, 2008 - 02:31 PM | Jeremy Hellstrom
PC2 9384 translates into DDR2-1173, or an actual speed of 586MHz. If your board can handle that FSB, the fairly low timings of 5-5-5-15 will help to speed up your system, and as the warranty will still cover you at 2.2V, you should be able to get some overclocking out of these DIMMs. TweakTown had difficulties finding a board that could keep up with
Subject: Memory | January 7, 2008 - 12:48 PM | Jeremy Hellstrom
Kingston is first to
produce a DDR2 1066MHz quad-kit configuration with
our HyperX high-performance memory. Using four
1GB modules, specifically designed to work together,
the innovative kit offers gamers and enthusiasts a
powerful 4GB environment at a great price point:
Subject: Memory | January 4, 2008 - 01:21 PM | Jeremy Hellstrom
Crucial's Ballistix PC3-12800 CL8 BL2KIT12864BA1608 DDR3 1600MHz 2x1GB RAM has a really long name to remember when you try to buy some, but it is worth doing. Not only does the stock speeds and latency offer some incredible performance, Benchmark Reviews managed to push the RAM to 1825MHz. The lack of XMP support is this kits bigg
Subject: Memory | December 12, 2007 - 05:56 PM | Jeremy Hellstrom
Patriot's Extreme Performance 2GB PC2-9600 DDR2-1200MHz seems to be running as fast as it can go on it's factory defaults. No matter what Overclockers Club tried, they could not get the DIMMs to be stable at even a 5MHz frequency bump. That's not to say you shouldn't consider this RAM, it's EPP function worked perfectly on the 680i motherboard t
Subject: Memory | December 12, 2007 - 11:13 AM | Jeremy Hellstrom
Attend a free Webcast on December 13th to hear how the next generation of memory, DDR3 technology, will improve your desktop and mobile computing experience from leading companies working with the technology: Intel, ASUS, and Kingston.
The Webcast will include a discussion of DDR3, XMP performance specification, and performance motherboards and memory. Participants may also participate in a live Q&A session at the conclusion of the Webcast.
Subject: Memory | December 6, 2007 - 02:28 PM | Jeremy Hellstrom
DDR3 is getting faster, and now that we are seeing DIMMs reaching the 1800MHz range, most boards actually need to be overclocked to reach those speeds. Without one of the more overclocking friendly boards, you probably won't be able to hit full speed. X-bit Labs had the chance to try two new modules, and contrast them to the three they have previously seen in the same speed range with a little help from an X38 board.
OCZ Technology Introduces New DDR2 8GB Quad Kits for Advanced Gaming Systems and Professional Workst
Subject: Memory | November 30, 2007 - 11:15 AM | Jeremy Hellstrom
Sunnyvale, CA - November 29, 2007 - OCZ Technology Group, Inc., a worldwide leader in innovative ultra-high performance and high reliability memory, today announced the 8GB Platinum PC2-6400 "Quad" Kit. These high-density, optimized kits offer users the option of both high speeds and high capacities needed for their demanding gaming PC and Vista-upgraded desktops in a unique 4 x 2048MB solution.
Subject: Memory | November 29, 2007 - 01:37 PM | Jeremy Hellstrom
Legit Reviews puts Corsair's TWINX Dominator Dual Channel 1800MHz DDR3 against it's self in a battle of timings. It is rated to run with 7-7-7-20 at 1800MHz, but LR discovered that at 1333MHz, it can run at 4-4-4-12 timings. Of course the obvious next step was to run it at those to speeds, as well as 7-7-7-20 at 1300MHz, to see what differences appear.
Subject: Memory | November 19, 2007 - 03:05 PM | Jeremy Hellstrom
Over at Benchmark Reviews you can see SuperTalent's new W1800UX2GP 2GB RAM kit, which runs 1800MHz @ 7-7-7-21 and needs only 2.0 volts to do it. As you might expect, there are quite a few options with RAM that runs this fast, by backing off on the clock speed you can get tighter timings, or you can try to push it faster on the FSB, though not too much further.
Subject: Memory | November 7, 2007 - 12:20 PM | Jeremy Hellstrom
X-bit Labs has gathered RAM at several different speeds and latencies to see how well DDR3 is doing at taking over DDR2s spot in the hearts of enthusiasts. You shouldn't expect to see a clear cut victor though, even though DDR3 has jumped from 1333MHz to 1800MHz in a very short time, many tests depend on low latency, and that doesn't begin to touch on the current pricing of 1800MHz modules.
Subject: Memory | November 7, 2007 - 11:41 AM | Jeremy Hellstrom
Sunnyvale, CA - November 6, 2007 - OCZ
Technology Group, a worldwide leader in innovative, ultra-high performance and
high reliability memory, today announced the ReaperX memory series, aninnovative memory solution that utilizes highly effective heat transfer
Subject: Memory | October 30, 2007 - 01:29 PM | Jeremy Hellstrom
Crucial's Ballistix PC3-12800 CL8 can hit 1780MHz, with 8-8-8-20 timings at a voltage of 1.8V, for under $700. While that won't break any speed records, and it resists any attempts to tighten the timing , PC Stats still likes this memory for anyone looking for reliable RAM with a rock solid warranty.
Subject: Memory | October 24, 2007 - 05:26 PM | Jeremy Hellstrom
Tech Spot has put together a guide on tweaking memory settings in Vista. They take you on a guided tour of the registry, and the keys that can be altered to get Vista running a bit better. They don't limit the tweaks to the memory subsystem either, you will see ways to change your page file and the way your HDDs work.
Subject: Memory | October 18, 2007 - 02:20 PM | Jeremy Hellstrom
OCMODSHOP sat down with a rep from Kingston at WGC2007 for a talk about their upcoming plans. It seems that they have plans to reposition themselves in the memory marketplace to compete directly with the enthusiast brands like OCZ and Corsair. They also got a sneak peek at some flash storage that you will be able to purchase soon.
Subject: Memory | October 17, 2007 - 06:02 PM | Jeremy Hellstrom
Sunnyvale, CA - October 17, 2007 - OCZ Technology Group, Inc., a worldwide leader in innovative ultra-high performance and high reliability memory, today announced two new PC2-6400 Titanium Edition dual channel kits. These modules feature enhanced timings with low latencies, and are the ultimate upgrade in performance or capacity for gamers and enthusiasts in need of a rock solid memory kit.
Subject: Memory | October 12, 2007 - 02:59 PM | Jeremy Hellstrom
Intel's new chipset seems quite fond of DDR3, giving it's performance a small boost when compared to similarly clocked DDR2. AnandTech didn't have one of those boards handy for their testing of new modules from Corsair, Kingston and Cell Shock, but a P35 based board will do in a pinch. The performance of DDR3 is rising rapidly, as the latencies fall, although the prices have not changed much. If you can afford these newer DIMMs, you won't be disappointed by their performance.
Subject: Memory | October 11, 2007 - 03:56 PM | Jeremy Hellstrom
Sunnyvale, CA - October 10, 2007 - OCZ Technology Group, a worldwide leader in innovative, ultra-high performance and high reliability memory, today announced the 4GB PC2-6400 CL4 series, the latest edition to the highly-awarded OCZ Reaper HPC (Heat Pipe Conduit) product family. With a proven performance design coupled with the blazing latencies and memory capacity enthusiasts crave, the 4GB PC2-6400 Reaper CL4 series provides rock-solid stability and performance on the latest AMD and Intel platforms.
Subject: Memory | October 3, 2007 - 02:39 PM | Jeremy Hellstrom
Neoseeker has posted a review of the fastest RAM I have ever seen benchmarked, at least once overclocked. OCZ's Platinum DDR3 PC3-14400 (1800MHz) @ 8-8-8-27 has been relabeled to 8-8-8-24, but they reviewed it at the higher latency, and managed to get a bit of an overclock without relaxing them further. Too bad it is also the most expensive RAM I have seen as