All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Cases and Cooling | October 8, 2004 - 11:45 AM | Jeremy Hellstrom
Overclockers Online puts a Swiftech Watercooling Kit to the test, A1-Electronics compares 3 heatsinks built for 1/4 inch hoses, and even more from GruntvillE.
"The Swiftech H20-120-P Water Cooling Kit we examine today is everything a user needs to jump into water cooling. This kit is made for Socket 478 Pentium 4 users, but most of the material covered should apply well to the other kits using similar parts.
Subject: Cases and Cooling | October 6, 2004 - 11:34 AM | Jeremy Hellstrom
Bit News has posted a good old fashioned heatsink round-up. Also, ExtremeMhz and OverClockersClub look at the Thermalright XP-120, and there is more ... cooling solutions for your VGA, chipsets and an air conditioner to boot.
"AMD's socket A may be one of the oldest sockets that's still selling, but it is alive and kicking; Sempron processors are flying out of the shops.
Subject: Cases and Cooling | October 4, 2004 - 11:46 AM | Jeremy Hellstrom
If home decorating is your thing, or maybe i';s the "thing" of someone close to you, and you are getting grief over your PC case not matching the window treatments. Well, Overclockercafe looks at a case from Aspire that let's you change the colour scheme of the case in 5 minutes. If that doesn't interest you, look down to see if any of the other reviews catch your eye
"Aspire realizes that you don't always want to look at the same old colors over and over so they have devised a way for you to have some variety in your case.
Subject: Cases and Cooling | October 1, 2004 - 11:39 AM | Jeremy Hellstrom
Not to much action in the watercooling world this week, but the three I got I give to you. Including GruntvillE reviewing at a very good performer, the Alphacool NexXxos XP block.
"The Alphacool NexXxos XP block turned in a very impressive performance and really compares well against the top US designed blocks that I put it up against.
Subject: Cases and Cooling | September 29, 2004 - 12:24 PM | Jeremy Hellstrom
If it moves air to cool your PC, chances are that at least one of these reviews will cover that area. Start it all off with and odd looking dual fan from Coolermaster, put through it's paces by ExtremeMhz.
'Recently, many enthusiast manufacturers have been starting to shift away from the standard 80mm fan design. This has resulted in several very odd looking setups, and today we get to take a look at Cooler Master's entry — the Dual Storm.
Subject: Cases and Cooling | September 27, 2004 - 12:10 PM | Jeremy Hellstrom
Thermaltake has designed a case specifically made to accomodate external radiators, and Overclocker Cafe takes a look at it. If that's not enough, further down we have 2 multifunction panels, and some thumb screws that are a little more artistic than normal.
"If you look closely you will see multiple 3/8' indentations, ten to be exact in several places. These can be punched out so that 3/8' OD hosing can be run through there to reach an external radiator or reservoir if you choose.
Subject: Cases and Cooling | September 24, 2004 - 11:46 AM | Jeremy Hellstrom
Copper ain't so shiny no more? Your transparent tubing letting you see your liquid cooling system looks like it uses Slushie mix? Maybe this article's for you! Or if you just want to toss it and buy a new one, look at the kits being reviewed this week.
"Here you can see some of the residues left on the acrylic tops from such a long period of use. Most likely under closer inspection, you could find a similar residue over the surface of the interior of your copper blocks.
Subject: Cases and Cooling | September 22, 2004 - 11:54 AM | Jeremy Hellstrom
As you can see, it is a quiet one, and able to keep a P4 cool n' froody. If you haven't read Robotech's review of the CoolerMaster Hyper 6, shame on you! Drop what you're doing and read it, now.
"Up until this point, Asus had not sold heatsinks under its brand name, and was known primarily as a videocard and motherboard manufacturer.
Subject: Cases and Cooling | September 20, 2004 - 12:15 PM | Jeremy Hellstrom
Is it just me, or are a lot of case manufacturers re-usung each others model names, usually with a fighting theme of some sort? Well, true or not, the Cavalier that Viper Lair reviews would stand out in any battlefield. Much like a Glitterboy for you Rifts fans :-)
"The basic design of the Chieftec case has not changed for over two years, but it still remains one of the nicer looking cases today, at least in our opinion.
Subject: Cases and Cooling | September 17, 2004 - 11:38 AM | Jeremy Hellstrom
One lonely watercooling review, from SystemCooling, and some miscellaneous additions to your cooling setup. The Enermax Panel might be something you are looking for, it reads most memory cards, has serial ATA connectors for external devices, USB & Firewire ... plus it's a fan controller.
"GlobalWIN has always brought quality and innovation to the market. Whether it's power supplies, cases, heatsinks, hard drive enclosures or other accessories you always know that it's going to be some of the best hardware available.
Subject: Cases and Cooling | September 15, 2004 - 12:16 PM | Jeremy Hellstrom
ExtremeMhz takes a look at a new companies heatsink. There's a lapping kit to look at, or maybe you are more concerned about noise dampening? Don't forget the 3 way fanless VGA cooler showdown, and for those neat-freaks out there, PCI slot covers!
Subject: Cases and Cooling | September 13, 2004 - 11:52 AM | Jeremy Hellstrom
Whether you are more concerned with how your case looks on the outside, or on the inside, there should be something to tweek your interest today. Start off with the Mutant X, and see what else catches your eye.
"Wanting to get away from the sometimes boring and average looking cases that are out on the market, Kingwin designed the Mutant X case for those who want to be a little on the wild side. Many of today's cases have a plain or modern and sterile look to them that may not appeal to everyone.
Subject: Cases and Cooling | September 10, 2004 - 12:01 PM | Jeremy Hellstrom
Just a quick one today folks, but still worth reading.
"As we've stated at the beginning of the review, building an efficient water cooling system will take some planning and research.
Subject: Cases and Cooling | September 8, 2004 - 11:49 AM | Jeremy Hellstrom
It's a mixed bag of fans and fins today. These reviews cover everything from Phoronix's look at a silent VGA cooler through traditional heatsink/fan combos to a heatpipe based HDD cooler. Don't forget our Corsair giveaway!
"When one focuses upon cooling their computer system, more often than not the main focus is the CPU. With recent graphics cards getting warmer due to higher clock and memory speeds, stock cooling just isn't satisfactory any more.
Subject: Cases and Cooling | September 7, 2004 - 11:49 AM | Jeremy Hellstrom
ExtremeMhz looks at a very large and stylish case from Silverstone. Also, some themed cases, Dracula, and Mutant X and a statement from Cooler Master about some competitors claims ... and sorry 'bout the school thing.
"Today I have the enviable pleasure of reviewing the brand new Temjin Series flagship from Silverstone Technologyâ€¦the TJ05S-T. Silverstone is getting to be more and more of a recognized name, and rightly so.
Subject: Cases and Cooling | September 3, 2004 - 11:54 AM | Jeremy Hellstrom
Just a few reviews for today, make sure to look at the radbox if you are on a tight budget, or consider the BigWater H2O kit if you want a top performer. Enjoy your long weekend!
"You're looking to upgrade your water cooling setup and would like to go with a larger radiator and fan combo. One problem — your already cramped box just won't accommodate that '59 Caddy heater core you saw at the bone yard and have lusted after. Well, Swiftech to the rescue!
Subject: Cases and Cooling | September 1, 2004 - 12:15 PM | Jeremy Hellstrom
Pimprig looks at an interesting gadget from Logisys, an adjustable fan bracket that mounts in a PCI slot to keep your cards cool. Also look at flickerdown's review of a Fanless heatsink from Thermaltake.
"What is a 3D Edge Fan? Well I'm glad you asked. The 3D Edge Fan is a multi directional/positional fan set-up that can cool anything in the PCI slots or close to them.
Subject: Cases and Cooling | August 30, 2004 - 11:48 AM | Jeremy Hellstrom
fastlanehw looks at a non-Xaser Thermaltake case, there's an acrylic case from beantech, and a "transformer looking" NZXT Guardian at R&Bmods. Enjoy.
"Thermaltake has been making cases for quite a while now, all of which bear the "Xaser" nameplate, and usually the accompanying flashy graphics and outrageous colors, all of which have been a heavy topic of debate amongst computer builders.
Subject: Cases and Cooling | August 27, 2004 - 11:38 AM | Jeremy Hellstrom
Modtown runs through the installation of a waterblock onto a GPU and RAM. If you are thinking of trying watercooling your own system, take a look how easy it is to set up a watercooled VGA.
"The NV-68 Block is relatively simple to fit, but considering you have just invested heavily in both a top of the line Graphics Card and Block it's well worth taking a little time to read the following step by step guide to ensure you get the block fitted correctly first time without any costly mistakes."
Here are some mor
Subject: Cases and Cooling | August 26, 2004 - 01:00 PM | Jeremy Hellstrom
Silicon carbide (SiC). That's the stuff used to make the heat shields on the Space Shuttle. Although it may take a while, as "SiC semiconductors are generally expected to b