All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Storage | August 12, 2013 - 05:37 PM | Jeremy Hellstrom
Tagged: ssd, partition, MiniTool Partition Wizard Home Edition, 4k
SSDs and modern OSes no longer use the old 512 byte LBA alignment, or at least they don't need to and in the case of SSDs offer larger disk size and faster performance. However many people are not aware of 4k alignment nor how to check if their SSD is aligned nor what to do even if they do know it is not aligned. Hardware.Info put together a short article on the steps to verify if your SSD is aligned as well as covering a free partitioning tool called MiniTool Partition Wizard Home Edition which will help you align your SSD as well as other tasks common to partitioning software. As with any major changes being made at this low a level, do realize that this could cause data loss, but aligning those sectors is a great IDEMA.
"When you copy the contents of a hard disk from a PC or laptop to an SSD you have to make sure that the placement of the partitions corresponds to the underlying hardware structure. The same is true for the latest generation of hard disks. Today we'll discuss what this so-called '4k alignment' really means and what you can do in order to prevent a decrease in performance."
Here are some more Storage reviews from around the web:
- ULLtraDIMM: combining SSD and DRAM for the enterprise @ Hardware.info
- Seagate 600 SSD 240GB (ST240HM000) @ NikKTech
- Plextor M5 Pro 256 GB SSD @ techPowerUp
- SanDisk Extreme 2 240GB SSD Review @ Hardware Canucks
- SanDisk Extreme II Solid State Drive SDSSDXP @ Legion Hardware
- Seagate Laptop Thin SSHD 500GB @ NikKTech
- ASUS RAIDR Express 240GB PCI-Express SSD @ Hardware.info
- Silicon Power Blaze B20 USB 3.0 Flash Drive Review @ Madshrimps
- Corsair Voyager Air 500GB @ Legion Hardware
- WD My Passport Ultra 1TB Portable Hard Drive Review @ Techgage
- Patriot Tab 32GB USB 3.0 Flash Drive @ eTeknix
- Kingston DT Ultimate 3.0 G3 32GB USB 3.0 Flash Drive 2 Funky Kit
- Seagate Business Storage 2-bay 6TB @ Hardware.info
- Synology DS713+ @ techPowerUp
- Seagate NAS HDD 4TB Review @ Techgage
- QNAP TS-421 and TS-420 @ Legion Hardware
- Teratrend (SilverStone) TS231U 2 Bay USB3.0 RAID Enclosure @ eTeknix
Subject: Storage | August 12, 2013 - 09:00 AM | Allyn Malventano
Tagged: ssd, silicon motion, sata, controller
You may very well have never heard of Silicon Motion (SMI), a major priducer of flash memory controllers, even if you've followed the SSD industry for a while. This is primarily because the vast majority of their products have been tailored for the devices that folks tend to not crack open during review, namely USB memory sticks, eMMC devices, and SD / CF cards:
Creating controllers in those arenas will tend to force a company to do a few things very well:
- Handle a very limited number of flash channels with the greatest speed possible, due to packaging requirements for very small devices.
- Operate at the lowest power draw possible as to meet the current draw limits of the host interface.
This has resulted in SMI developing a 6Gb/sec SSD controller, dubbed the SM2246EN, using the above techniques:
The block diagram shows what appears to be a fairly standard 4-channel configuration, though there are fewer steps in the pipeline as compared to SandForce and other controllers, which should help decrease latency and improve efficiency. There is also no compression engine, which means power consumption should be further reduced.
Read on for further details on specs and power consumption, followed by the full press blast.
Subject: Storage | July 31, 2013 - 05:34 AM | Tim Verry
Tagged: diablo technologies, DIMM, nand, flash memory, memory channel storage
Ottawa-based Diablo Technologies unveiled a new flash storage technology yesterday that it calls Memory Channel Storage. As the name suggest, the storage technology puts NAND flash into a DIMM form factor and interfaces the persistent storage directly with the processor via the integrated memory controller.
The Memory Channel Storage (MCS) is a drop-in replacement for DDR3 RDIMMs (Registered DIMMs) in servers and storage arrays. Unlike DRAM, MCS is persistent storage backed by NAND flash and it can allow servers to have Terabytes of storage connected to the CPU via the memory interface instead of mere Gigabytes of DRAM acting as either system memory or block storage. The photo provided in the technology report (PDF) shows a 400GB MCS module that can slot into a standard DIMM slot, for example.
Diablo Technologies claims that MCS exhibits lower latencies and higher bandwidth than PCI-E and SATA SSDs. More importantly, the storage latency is predictable and consistent, making it useful for applications such as high frequency stock trading where speed and deterministic latency are paramount. Further, users can get linear increases in throughput with each additional Memory Channel Storage module added to the system. Latencies with MCS are as much as 85% lower with PCI-E SSDs and 96% lower than SAS/SATA SSDs according to Diablo Technologies. NAND flash maintenance such as wear leveling is handled via an on-board logic chip.
Diablo Technologies is also aiming the MCS technology at servers running big data analytics, massive cloud databases, financial applications, server virtualization, and Virtual Desktop Infrastructure (VDI). MCS can act as super fast local storage or as a local cache for external (such as networked) storage in the form of mechanical hard drives or SSDs.
Some details about Memory Channel Storage are still unclear, but it looks promising. It will not be quite as fast in random access as DRAM but it will be better (more bandwidth, lower latency) than both PCI-E and SATA-connected NAND flash-based SSDs. It would be awesome to see this kind of tech make its way to consumer systems so that I can have a physical RAMDisk with fast persistent storage (at least as far as form factor, MCS uses NAND not DRAM chips).
The full press release can be found here.
Subject: Storage | July 28, 2013 - 11:13 AM | Tim Verry
Tagged: ssd, raidr express, raidr, pci-e ssd, ASUS ROG, asus
ASUS has officially launched its PCI-E based ROG RAIDR Express SSD which was first shown off at CES 2013. The company posted details and high resolution photos on its Republic of Gamers blog on Friday.
The new PCI-E-based solid state drive measures 157 x 120 x 20mm and contains 240GB of NAND flash encased in a sleek metal Replublic Of Gamers themed exterior. Specifically, the RAIDR Express uses 19nm Toshiba synchronous MLC NAND flash and two LSI SandForce 2281 SSD controllers. As such, the drive is actually two SSDs that are placed in a RAID 0 configuration for the best performance. ASUS rates the drive at 830 MB/s sequential reads and 810 MB/s sequential writes. The PCI-E SSD is further capable of up to 100,000 4K random IOPS.
ASUS has also included what it is calling a "DuoMode" BIOS switch that allows the drive to be used with either legacy or modern UEFI BIOSes. When the switch is in the EUFI position, PCs with the modern UEFI-equipped motherboards can boot up faster.
Beyond the RAIDR Express SSD itself, ASUS includes the following bundled software packages:
- RAMDisk software
- HybriDisk caching software
- SSD TweakIT utility
ASUS is including RAMDisk software that is able to use as much as 80% of system RAM as a virtual drive that can be used to reduce wear on the SSD by using the RAM drive instead of the SSD for writing temporary files and the like. The above mentioned HybriDisk software allows the RAIDR Express SSD to be used as a cache drive for mechanical hard drives up to 4TB in capacity. Users can use the TweakIT utility to manage and optimize the SSD, and the CrystalDiskMark benchmark is being included to allow gamers to run benchmarks on the RAIDR Express to get an idea of its performance.
Oddly enough, ASUS has yet to release specific pricing or availability. More information along with the full press release can be found on the Republic of Gamers blog, however.
With that said, some sites are reporting that the RAIDR Express will be sold for around 440 Euros, which works out to about $600 USD or $2.5 per Gigabyte. Update: Commentor Roberto has pointed out that the RAIDR Express 240GB is available over in Japan for around 39,980 Yen, or ~$409 USD which is a much more reasonable price. US availability and pricing are still just estimates at this point, however. A bit on the expensive side (if the price is true) for sure, but it is nice to see another player in the PCI-E SSD space and it looks to be a speedy drive aimed at ROG fans and enthusiasts.
Also read: Details on a 120GB ASUS ROG RAIDR Express SSD @ PC Perspective.
Subject: Storage | July 26, 2013 - 06:08 PM | Jeremy Hellstrom
Tagged: TurboWrite, tlc, ssd, slc, Samsung, 840 evo, MEX controller
Along with Al's review of the new EVO line you can get a second opinion from The Tech Report about the performance of the new SSD with a fast cache. The majority of the storage is 19nm TLC NAND but there is an SLC cache sitting between the controller and that long term TLC storage to help with the overall responsiveness of the drive, aka TurboWrite. In the 120 and 250GB models that cache is 3GB while in the larger models you get a 6GB cache. In their real world testing the new EVO drive is incredible at large file copying though Sandforce drives can beat it in small file copy speeds, likely thanks to the compressed write trickery that controller family is so good at. Check out the review here and keep your fingers crossed that MSRP is the acual price these drives sell at.
"Samsung's entry-level 840 EVO SSD combines affordable TLC NAND with a server-style SLC cache. We explain the drive's unique buffering tech and explore how it affects performance."
Here are some more Storage reviews from around the web:
- Samsung 840 EVO SSD @ The SSD Review
- Samsung SSD 840 EVO Review: 120GB, 250GB, 500GB, 750GB & 1TB Models Tested @ AnandTech
- Samsung 840 EVO 250GB, 750GB SSD Review @ Custom PC Review
- Samsung 840 Evo SSD @ Hardware.info
- Samsung unveils 840 EVO solid-state drive family @ The Tech Report
- 240GB OCZ Vertex 450 Solid State Drive @ Benchmark Reviews
- Plextor M5M 128GB mSATA SSD Review @ Legit Reviews
- OCZ Vertex 3.20 240GB SSD @ eTeknix
- OCZ Vector 512GB SSD @ Kitguru
- RunCore Pro IV 1.8 Inch ZIF SSD @ LanOC Reviews
- Silicon-Power Velox V55 240GB @ Legion Hardware
- Seagate 600 Pro SSD 400GB @ Bjorn3D
- Securely Erasing Your SSD with Linux: A How-To @ Techgage
- Seagate Central 3TB review: User-friendly? @ Hardware.info
- Silicon Power Blaze B20 32GB USB 3.0 Flash Drive @ NikKTech
- USB 3.0 Flash Drive Roundup July 2013 @ Legion Hardware
- Icy Dock FlexCage 2 Bay and 3 Bay Hard Drive Enclosure Review @ HiTech Legion
- Zalman ZM-VE400 USB 3.0 HDD/SSD Enclosure @ Funky Kit
- QNAP TS-421 & QTS 4.0 @ techPowerUp
- Thecus N2520 review: first NAS with Intel Atom CE5315 @ Hardware.info
Subject: Storage | July 26, 2013 - 12:35 AM | Tim Verry
Tagged: turbo sshd, sshd, Seagate, nand, enterprise
Earlier this week Seagate took the wraps off of its latest Solid State Hybrid Drive (SSHD). Dubbed the Enterprise Turbo SSHD, this latest model is aimed at the enterprise server market. The drives combine a traditional 10K SAS mechanical hard drive in capacities up to 600GB with up to 32GB of NAND flash.
The 2.5" Enterprise Turbo SSHDs are aimed at servers with big data analytics, virtual desktops, and transaction processing workloads. The NAND flash acts as a cache for the mechanical hard drive, and caching is done by the controller at an I/O level.
According to Seagate, the company has been working with IBM over the past year to put the new SSHD through its paces. As such, the hybrid drives will first be available in the IBM X and BladeCentral servers. The IBM versions will have 16GB of NAND flash and one year warranties according to the documentation available online.
Seagate further claims up to three times random performance increase versus 15K SAS mechanical hard drives. The 600GB 10K SSHD is rated to have up to two times better IOPS than a traditional 10K SAS hard drive without a NAND cache.
The Enterprise Turbo also comes with enterprise-friendly drive self encryption options. The Seagate product page notes that the Enterprise Turbo SSHD will have a five year warranty. Pricing and detailed benchmarks are not yet available though some preliminary performance results can be found here.
The full press release can be found here.
Subject: General Tech, Storage | July 18, 2013 - 04:56 PM | Scott Michaud
Tagged: Raspberry Pi, nvidia, HPC, amazon
Adam DeConinck, high performance computing (HPC) systems engineer for NVIDIA, built a personal computer cluster in his spare time. While not exactly high performance, especially when compared to the systems he maintains for Amazon and his employer, its case is made of Lego and seems to be under a third of a cubic foot in volume.
Image source: NVIDIA Blogs
Raspberry Pi is based on a single-core ARM CPU bundled on an SoC with a 24 GFLOP GPU and 256 or 512 MB of memory. While this misses the cutesy point of the story, I am skeptical of the expected 16W power rating. Five Raspberry Pis, with Ethernet, draw a combined maximum of 17.5W, alone, and even that neglects the draw of the networking switch. My, personal, 8-port unmanaged switch is rated to draw 12W which, when added to 17.5W, is not 16W and thus something is being neglected or averaged. Then again, his device, power is his concern.
Despite constant development and maintenance of interconnected computers, professionally, Adam's will for related hobbies has not been displaced. Even after the initial build, he already plans to graft the Hadoop framework and really reign in the five ARM cores for something useful...
... but, let's be honest, probably not too useful.
Subject: General Tech, Storage | July 18, 2013 - 02:29 AM | Tim Verry
Tagged: nand, micron, flash, 16nm
Micron recently announced that is has begun sampling 16nm NAND flash to select partners. Micron expects to begin full production of the NAND chips using the smaller flash manufacturing process in the fourth quarter of this year (Q4 2013). Drives based on its new 16nm MLC NAND flash are expected to arrive as early as next year. (PC Perspective's own storage expert is currently overseas, but I managed to reach out over email to get some clarification, and his thoughts, on the Micron annuoncement.)
The announcement relates to new NAND flash that is smaller, but not necessarily faster, than the existing 20nm and 25nm flash chips used in current solid state drives. In the end, Micron is still delivering 128Gb (Gigabit) per die, but using a 16nm process. The 16nm flash is a pure shrink of 20nm which is, in turn, a shrink of 25nm flash. In fact, Micron is able to get just under 6 Terabytes of storage out of a single 300mm wafer. These wafers are then broken down into dies in individual flash chips that are used in all manner of solid state storage devices from smartphone embedded storage to desktop SSDs. This 16nm flash still delivers 128Gb --which is 16GB-- per die allowing for a 128GB SSD using as few as eight chips.
A single 16nm NAND flash die with a SSD in the background
Micron expects the 16nm MLC (multi-level cell) flash to be used in consumer SSDs, USB thumb drives, mobile devices, and cloud storage.
The 16nm process will allow Micron to get more storage out of the same sized wafer (300mm) used for current processes, which in theory should mean flash memory that is not only smaller, but (in theory) cheaper.
A single wafer of 16nm NAND flash (just under 6TBs)
As Allyn further notes, the downside to the new 16nm NAND flash is a reduction in the number of supported PE cycles. Micron has not released specific information on this, but the new 16nm MLC flash is expected to have fewer than 1,000 P/E cycles. For comparison, 25nm and 20nm flash has P/E cycles of 3,000 and 1,000 respectively.
In simple terms, P/E (program-erase) cycles relate to the number of times that a specific portion of flash memory can be written to before wearing out. SSD manufacturers were able to work around this with the transition from 25nm to 20nm and still deliver acceptable endurance on consumer drives, and I expect that similar techniques will be used to do the same for 16nm flash. For example, manufactuers could enable compression that is used prior to writing out the data to the physical flash or over-provisioning the actual hardware versus the reported software capacity (ie a drive sold as a 100GB model that actually has 128GB of physical flash).
I don't think it will be a big enough jump that typical consumers wil have to worry too much about this, considering the vast majority of operations will be read operations and not writes. Despite the reduction in P/E cycles, SSDs with 16nm NAND MLC flash will still likely out-last a typical mechanical hard drive.
What do you think about the Micron announcement?
The full press release can be found below:
Subject: Storage | July 18, 2013 - 01:39 AM | Allyn Malventano
Tagged: ssd, Samsung, pricing, EVO, 840 evo
Subject: Storage | July 18, 2013 - 01:12 AM | Allyn Malventano
Tagged: tlc, ssd, slc, sata, Samsung, cache, 840 evo
Samsung's release of the 840 EVO earlier today likely prompted some questions, such as what type of flash does it employ and how does it achieve such high write speeds. Here is the short answer, with many slides in-between, starting off with the main differences between the 840 and the 840 EVO:
So, slightly increased specs to help boost drive performance, and an important tidbit in that the new SSD does in fact keep TLC flash. Now a closer look at the increased write specs:
Ok, the speeds are much quicker, even though the flash is still TLC and even on a smaller process. How does it pull off this trick? Tech that Samsung calls TurboWrite.
A segment of the TLC flash is accessed by the controller as if it were SLC flash. This section of flash can be accessed (especially written) much faster. Writes are initially dumped to this area and that data is later moved over to the TLC area. This happenes as it would in a normal write-back cache - either during idle states or once the cache becomes full, which is what would happen during a sustained maximum speed write operation that is larger than the cache capacity. Here is the net effect with the cache in use and also when the cache becomes full:
For most users, even the smallest cache capacity will be sufficient for the vast majority of typical use. Larger caches appear in larger capacities, further improving performance under periods of large write demand. Here's the full spread of cache sizes per capacity point:
So there you have it, Samsung's new TurboWrite technology in a nutshell. More to follow (along with a performance review coming in the next few days). Stay tuned!
Subject: Storage | July 17, 2013 - 09:06 PM | Allyn Malventano
Tagged: Samsung, ssd, sata
Good morning from Seoul, Korea!
We're covering the 2013 Samsung Global SSD Summit, and the press embargo has just been lifted on a new SSD - the 840 EVO:
The EVO will push 10nm-class (1x nm) flash, promises increased (2x-3x) write speed improvements over the 840, and will be available in capaities as high as 1TB:
Full press blast after the break, and more to follow as the Samsung SSD Summit continues.
Subject: Storage | July 15, 2013 - 04:05 PM | Jeremy Hellstrom
Tagged: sandisk, Extreme II series, ssd, mlc, slc
SanDisk has done something interesting with their new Extreme II SSD series, they have used both SLC and MLC flash in the drive to attempt to give users the best of both worlds. The drive still has a DDR cache sitting between the flash storage and the controller, but there is an nCache between the MLC flash and the DDR comprised of ~1GB of SLC flash. The idea is that the SLC can quickly accumulate a number of small writes into a larger single write block which can then be passed to the MLC flash for storage. Don't think of it as a traditional cache in which entire programs are stored for quick access but more as a write buffer which fills up and then passes its self to the long term storage media once it is full. The Tech Report put this drive through their tests and found it to be a great all around performer, not the fastest nor the best value but very good in almost any usage scenario.
"With MLC main storage and an SLC flash cache, the SanDisk Extreme II is unlike any other SSD we've encountered. We explore the drive's unique design and see whether it can keep up with the fastest SSDs on the market."
Here are some more Storage reviews from around the web:
- Corsair Neutron GTX 240GB SSD RAID 0 Performance @ Legit Reviews
- SanDisk Extreme II @ SSD Review
- OCZ Vector 256GB @ LanOC Reviews
- Silicon Power Velox V55 240GB SSD @ NikKTech
- Western Digital Se 4TB Review @ TechwareLabs
- Seagate Laptop Thin SSHD 500 GB HDD Review @ Hardware Secrets
- Seagate Desktop HDD.15 4TB / Barracuda XT 4TB @ Hardware.info
- Western Digital SE 4TB Hard Drive @ hardCOREware
- Toshiba Nearline MG03ACA400 4TB SATA III HDD @ NikKTech
- Western Digital Sentinel DX4000 16TB RAID5 4-Bay NAS @ eTeknix
- Icy Box IB-WF200HD @ Rbmods
- Sandisk Extreme microSDXC UHS-I 64GB Memory Card Review @ Legit Reviews
- Patriot SuperSonic Mini 16GB USB 3.0 Flash Drive @ NikKTech
- 49 SD and MicroSD cards tested: there's a difference @ Hardware.info
- Mach Xtreme MX-FX 32GB USB 3.0 Flash Drive @ NikKTech
Subject: Storage | July 3, 2013 - 03:04 PM | Jeremy Hellstrom
Tagged: toshiba, THNSNH 256GB, ssd
If you buy a machine with an SSD installed inside of it there is a good chance it is from Toshiba and it might even be the THNSNH 256GB model. As these drives are not sold separately but only inside OEM machines it is not often benchmarked. [H]ard|OCP wants to change that and put this drive and its internally designed controller up against some of their favourite retail drives. Their testing revealed a mixed bag of performance as in some tests it came close to beating out Samsung's 840 series but in other testing ended up at the bottom of the pack. Still, as this drive will end up in many mobile devices it is good to get an idea of the performance you can expect from it.
"Toshiba's massive foundry capabilities allow it to develop some of the leading SSDs for the OEM market. These SSDs come pre-installed in the latest computers with the option for an SSD, and today we look at the Toshiba THNSNH in comparison to current top-flight enthusiast-class SSDs."
Here are some more Storage reviews from around the web:
- OCZ Vertex 450 256GB @ [H]ard|OCP
- OCZ's Vertex 450 solid-state drive reviewed
- Seagate 600 Series SSD 480 GB ST480HM000 @ techPowerUp
- SanDisk Ultra Plus Solid State Drive @ X-bit Reviews
- Strontium Hawk (240GB) @ AnandTech
- SanDisk Extreme II SSD 240GB @ TechSpot
- SanDisk Extreme II SSD Review (240GB) @ SSD Review
- Plextor M5 Pro PX-256M5P 256GB SSD @ NikKTech
- Angelbird SSD2Go 480GB External SSD @ SSD Review
- Monster Digital OverDrive 3.0 1TB External SSD @ SSD Review
- Seagate Backup Plus 1 TB External HDD Review @ Hardware Secrets
- Silicon Power Diamond D20 500GB USB 3.0 Portable Hard Drive @ NikKTech
- QNAP TS-221 and TS-220 @ Legion Hardware
- SilverStone DS322 Compact USB 3.0 RAID Enclosure Review @ Pro-Clockers
- Patriot Memory Tab 16GB USB 3.0 Flash Drive Review @ Madshrimps
- Icy Dock MB882SP and MB982IP Hard Drive Converter Reviews @ Legit Reviews
- Nine internal DVD burners and Blu-ray drives tested @ Hardware.info
- Hard Disk Drive Myths Debunked! @ TechARP
We caught wind of a leaked Intel SSD Roadmap over at VRZone. The slide shows their rough release plans into early 2014:
Starting bottom-up, the old 320 Series (cropped slide bottom) and 330 Series are being phased out in light of the newer 500 series entrants. The 335 Series, driven by a SandForce controller and 20nm flash, may drop in capacity to only an 80GB model in order to drive customers towards the new 530 Series, which will replace both of the SandForce-driven 520 (SATA) and 525 Series (mSATA) offerings. The new 530 Series will be available in 80-480GB and connect via SATA, mSATA, and the newest M.2 SATA interfaces. You can learn more about M.2 by reading the first 6 or so slides from Paul Wassenberg's presentation from Storage Visions 2013. Here's a closer look at an M.2 unit:
From CES 2013, a Micron mSATA SSD (above) and M.2 SATA SSD (below).
With the 530 appearing to become Intel's big mainstream consumer push, they will also introduce a Pro 1500 and 2500 Series. I suspect Intel's own SATA 6Gb/sec controller will be lifted from their SSD DC S3500 and S3700 Series and trickled down into the Pro Series and possibly even into the 530 Series, though that is only speculation on my part.
For the enterprise, Intel will be further juggling their enterprise models around a bit, discontinuing the SSD 710 and possibly even the (25nm) S3700 in favor of the (20nm) S3500 Series, which will also see large gains in available capacity upwards of 800GB and even 1.6TB crammed into a 2.5" SATA unit. Intel's PCIe SSD 910 will eventually be replaced by what appears to be a quad-SSD-RAID variant of the current S3500 and S3700 Series units, dubbed P3500 and P3700, respectively. These models should show a substantial gain over the SSD 910, which did not perform spectacularly when compared to the newer SATA models available.
Subject: General Tech, Storage | June 28, 2013 - 01:24 PM | Jeremy Hellstrom
Tagged: western digital, Arkeia, backup
IRVINE, Calif. – June 27, 2013 – WD®, a Western Digital (NASDAQ: WDC) company and world leader in digital storage solutions, today unveiled the fourth generation of WD Arkeia™ network backup appliances, delivering an all-in-one backup and disaster recovery solution for small- and medium-sized businesses (SMBs).
The new line up consists of four rack-mount appliance models with larger internal disk capacities, faster processors, increased memory, and integrated solid state drives (SSDs) to shorten backup time and accelerate data recovery. The bundled WD Arkeia v10.1 software delivers new support for “seed and feed” technology to support hybrid cloud backups. This allows companies to move backups offsite via network replication rather than shipment of tapes.
“In announcing their fourth generation of purpose-built network backup appliances, WD Arkeia is delivering comprehensive SMB backup solutions that go beyond simple raw capacity increases,” said Liz Conner, senior research analyst, IDC. “WD Arkeia offers easy- to-use data protection that takes the guess work out of purchasing, configuring and managing data backup and recovery, while also embedding features such as deduplication and hybrid cloud backup for small- and medium-sized businesses or remote offices." “WD is committed to providing the growing SMB marketplace with a comprehensive suite of storage solutions,” said Jim Welsh, executive vice president and general manager of WD’s branded business unit. With unique features, these next-generation WD Arkeia network backup appliances offer solutions providers and their customers a simple, smart way to protect their data.
Fourth-Generation Performance and Ease-of-Use
Fourth-generation WD Arkeia backup appliances deliver performance and ease-of-use at an affordable price for SMBs. These new appliances extend the upper range of WD Arkeia appliances and complement available lower-range appliances. WD Arkeia R120s and R220s, both with optional LTO4 tape drives, integrate dual-core Atom and quad-core Xeon processors, respectively. Existing appliances deliver disk capacities from 2TB to 12TB and will also bundle WD Arkeia v10.1. The new fourth-generation appliances offer: o Increased Backup and Recovery Speed: New features include integrated LTO5 tape drives, processor upgrades to a maximum of 2 hex-core Intel® Xeon®, integrated SSDs on select models, and memory up to 96 GB to allow for increased data backup and recovery speeds of both files and disk images. WD Arkeia’s patented Progressive Deduplication™ technology accelerates backups by compressing data at source computers before transfer over local area networks (LANs) or wide area networks (WANs).
- Higher Storage Capacity: Storage capacity doubles from the third generation, with raw capacity now ranging up to 48 TB, configured in RAID-6.
- Improved Ease of Use: Version 10.1 of WD Arkeia software, delivered with the new generation, includes an on-boarding wizard to streamline the appliance setup process.
- Storage Reliability: All new WD Arkeia appliances feature WD enterprise-class WD RE™ hard drives for maximum data integrity.
- Simplified Tape-free, Offsite Storage: Version 10.1 of WD Arkeia software extends support for hybrid cloud backup capabilities to the full line of WD Arkeia appliances. “Seed and feed” capabilities allow administrators to supplement network replication of backup sets offsite by using USB-connected hard drives to transfer initial and large backup sets and also to size WAN bandwidth for the replication of nightly incremental backups.
Pricing and Availability
WD Arkeia fourth generation network backup appliances – models RA4300, RA4300T, RA5300, RA6300 – will be available in July 2013 through select DMR’s and WD-authorized value-added resellers (VARs) in the US, Canada, and Europe. Manufacturer’s Suggested Retail Price, including hardware and software, begins at $9,990 USD. WD Arkeia network backup appliances are covered by one year of unlimited access to technical support, one year of software updates, and a one-year limited hardware warranty.
Subject: Storage | June 20, 2013 - 07:40 PM | Jeremy Hellstrom
Tagged: LAMD Amber, corsair, neutron gtx
Corsair's Neutron GTX has 240GB of 19nm MLC NAND with a LAMD Amber controller, similar to the previous model but with process shrunk RAM. Write speeds do suffer from the new flash, but that will only be noticeable during large file transfers not during normal usage scenarios. On the other hand [H]ard|OCP noticed many performance increases which were due to the LAMD Amber controller and netted this drive a Silver award. The SSD market is very large, with many makes and models available; this drive is worth putting on your short list.
"Corsair moves to a smaller 19nm Toshiba Toggle MLC NAND with its LAMD-controlled Neutron GTX Series of SSDs. This shrink comes amongst stiff competition from other manufacturers, and a new SSD that is very similar to the Neutron GTX. Today we see how the new GTX stacks up against its increased competition."
Here are some more Storage reviews from around the web:
- SanDisk Extreme II 240 GB SSD Review @ OCC
- Hardware.Info tests lifespan of Samsung SSD 840 250GB TLC SSD
- HGST SSD800MM SAS 12Gbps SSD and LSI SAS 9300-8e HBA @ SSD Review
- OCZ Vertex 450 256GB SSD Review @ Hardware Canucks
- TCS BGADrive SSD @ SSD Review
- SanDisk Extreme II 240GB SSD @ Kitguru
- Toshiba THNSNH 256 GB SSD @ techPowerUp
- Intel SSD DC S3500 Review (480GB) @ AnandTech
- Samsung 840 Pro and Samsung 840 Solid State Drives @ X-bit Labs
- Intel DC S3500 480GB SSD Review @ HCW
- Intel DC S3500 Data Center SSD Review (480GB x 4) @ SSD Review
- OCZ Vertex 3.20 240GB SSD Review @ Hardware Canucks
- Lexar Professional USB 3.0 Dual-Slot Reader @ techPowerUp
- Patriot Supersonic Magnum 256GB USB 3.0 Flash Drive Review @ OCC
- Mushkin Enhanced Ventura Plus Series 16GB USB 3.0 Flash Drive Review @ Madshrimps
- Kingston DT HyperX Predator 512GB USB 3.0 Flash Drive @ Funkykit
- Synology DiskStation DS1513+ @ Legion Hardware
- Synology DiskStation DS1813+ @ Kitguru
- Startech.com S2510U2W review: WiFi disk @ Hardware.info
- ASUSTOR AS-604T NAS Network Storage Server @ Benchmark Reviews
- Buffalo DriveStation DDR3 review: external disk on steroids @ Hardware.info
- QNAP TS-421 4-bay Home & SOHO NAS Review @ Madshrimps
Subject: General Tech, Storage | June 12, 2013 - 08:04 PM | Ken Addison
Tagged: ultrabook, sandisk, Samsung, pci-e ssd, Marvell, MacBook Air, macbook, haswell, apple
As Scott covered earlier this week, Apple quietly announced an update to the MacBook Air line along side the headline-grabbing Mac Pro redesign preview. Being a MacBook Air user for the past 2 years, I decided it was time to replace my Sandy Bridge-based model with some new Haswell goodness. Today marked the first day of retail store availability, and I picked up an 11" model with 256GB SSD.
Naturally, when I got back to the office there was only one route to take, installing Windows and disassembling it. While Anand uncovered the fact that these MacBooks were hiding a new unadvertised option, in a PCI-Express based SSD, I wanted to check it out for myself.
When I did some digging, I discovered that while Anand found a Samsung based SSD in his MacBook, mine actually contained a model by Sandisk. I did a quick initial benchmark in OS X, and proceeded to inspect the hardware itself.
Subject: Storage | June 11, 2013 - 08:08 PM | Jeremy Hellstrom
Tagged: Seagate, NAS
CUPERTINO, Calif.--(BUSINESS WIRE)-- Seagate Technology (NASDAQ:STX) today took the wraps off its new Seagate® NAS HDD—a cutting-edge drive custom-built for always-on, one- to five-bay network attached storage (NAS) systems. Engineered with performance and reliability in mind, the new drives are available in multiple capacity points including a 4TB option—the industry’s highest capacity NAS hard disk drive (HDD) solution available—and strong industry support from nine NAS system partners.
“Today about 50 percent of NAS arrays are sold diskless meaning that customers are challenged with identifying and installing the right storage for their system. By developing a drive like NAS HDD, we’ve taken the guesswork out of it and made it easy for customers to identify the right drive for their system,” said Scott Horn, Seagate vice president of marketing. “By collaborating closely with a variety of partners who specialize in NAS systems, we’re making what was a confusing effort into a plug-and-play one.”
Featuring up to 4TB of storage the drive now enables NAS systems, such as those utilized in homes and small to midsize businesses (SMB), to provide up to 20TB of data in a five-bay NAS array. And with over 30 percent capacity improvement over competitive offerings, the NAS HDD 4TB drive delivers the highest capacity available on the market.
Cost effective drives built specifically for NAS solutions, the 4TB option has the capacity to store over 819,000 photos, 1 million songs or nearly 500 hours of high-definition (HD) video content—more than enough space for the average household. It is also ideal for small businesses with large enough capacities to support CAD files, medical images and databases.
“QNAP is thrilled to be teaming up with Seagate to offer our customers a high-performance storage solution optimized for NAS systems,” said Meiji Chang, general manager of QNAP. “The Seagate NAS HDD allows us to deliver the highest capacity storage offering on the market while providing our customers with a huge boost in performance and a reliable business level NAS solution for 24x7 operations.”
“Households and SMBs continue to generate a significant amount of data, and need fast and reliable storage solutions,” said John Rydning, IDC's research vice president for hard disk drives. “Rather than taking hours or days to transfer a large amount of digital content over the internet to a cloud storage service provider, Seagate’s new NAS HDD provides a high-capacity solution for fast data transfers and backups on-premise over local networks.”
Built to provide up to 10 percent performance advantage over the competition for 24x7 NAS applications, the NAS HDD is engineered for performance in always on applications and can support multiple HD video streams and user profiles. The drive boasts near silent acoustics operating below the range of audible sound for the human ear with as low as 1.9 bels, providing optimized acoustics for the home or SMB environment. It also features Seagate’s own NASWorks™ technology which improves drive reliability by supporting features that limit drive vibrations and support extended error recovery controls for better data integrity.
Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems. Key features of the NAS HDD include:
- Industry’s Highest Capacity NAS Drive—up to 4TB available, the NAS HDD offers a 30 percent capacity advantage over the competition.
- Best Performance for 1- to -5-bay NAS Systems—built and tested to provide industry-leading performance, NAS HDDs offer the industry’s highest throughput to deliver the performance demanded by NAS solutions.
- NASWorks—supports error correction via customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 5-bay solution.
- Improved Vibration Tolerance—dual-plane balance supports the unique weighted motor design minimizing vibration that can be amplified in multi-drive systems improving the drive’s performance and system reliability.
- Advanced Power Management—supports multiple user-selectable power profiles that can optimize power usage for different workloads to minimize power consumption while maintaining high-availability performance.
- Quiet Drive Operation—enhances the end customer experience with near-silent acoustics for low-noise environments like living rooms or office spaces.
Designed with compatibility in mind, Seagate NAS hard disk drives have been rigorously tested by some of today’s top NAS providers and flawlessly integrated into their NAS solutions. For more information on the Seagate NAS HDD and qualified OEM partners please visit www.seagate.com/www/nashdd.
Subject: Storage | June 7, 2013 - 06:38 PM | Jeremy Hellstrom
Tagged: sandisk, Extreme II series, marvell 9187, 19nm, mlc
SanDisk claims their Extreme II can run at 550/510 MB/s sequential read/write, and 95,000/78,000 for random read/write IOPS, a claim which [H]ard|OCP just put to the test. The two major changes to this drive that will contribute to the difference in speed are the switch from a Sandforce controller to the Marvell 9187 controller and the MLC flash which is 19nm in this drive. Testing shows that the drive does live up to expectations though they did point out the lack of encryption as a weakness. Prices for the drives are around the magic $1/GB mark, making this drive a solid contender in a very populous market.
"SanDisk releases its Extreme II series SSD, which features the Marvell 9187 controller in concert with 19nm eX2 ABL MLC NAND. The competition is heating up as another manufacturer with massive foundry capabilities releases a new SSD. Will the Extreme II "blaze through your day" and "keep you ahead of deadlines?"
Here are some more Storage reviews from around the web:
- SanDisk Extreme II Series 120GB, 240GB and 480GB SSD Review @ Legit Reviews
- Seagate 600 240GB SATA III 6Gbps SSD Review @ Legit Reviews
- OCZ Vertex 3.20 240GB SSD Review @ HiTech Legion
- Crucial M500 480GB SSD Review @ Hardware Canucks
- LSI SandForce Next Gen SSD Controller With 1800MB/s Speeds Discovered at Computex @ SSD Review
- Seagate's 600 SSD solid-state drive @ The Tech Report
- KingFast E-Drive KF2510SCF 120GB 2.5" SATA 3 SLC SSD Review @ ModSynergy
- KingFast E-Drive 2.5'' SATAIII SLC 120GB SSD Review @ Madshrimps
- OCZ Vertex 3.20 240GB SSD review: Vertex 3 with 20nm flash @ Hardware.info
- ADATA DashDrive Elite UE700 64GB USB 3.0 Flash Drive @ eTeknix
- Zalman U3M32 32GB SLC USB 3.0 Flash Drive @ Funkykit
- Seagate's Desktop HDD.15 4TB hard drive @ The Tech Report
- Seagate Constellation ES 1TB Hard Drive Review @ PCSTATS
- Adaptec (by PMC) ASR-72405 RAID Controller (X2) Review - 1M IOPS & 12GB/s Thru 24 SMART Optimus SSDs @ SSD Review
- Vantec NexStar WiFi Hard Drive Dock Review @ Legit Reviews
- ioSafe N2 NAS / RAID Storage Solution Review @ OCIA
- Synology DS713+ NAS @ TechwareLabs
- QNAP TurboNAS TS-221 NAS Server @ NikKTech
- Infortrend EonNAS Pro 510 Review @ TechwareLabs
Subject: Storage | June 3, 2013 - 09:59 PM | Tim Verry
Tagged: super talent, ssd, mx3, computex 2013, computex
San Jose-based storage manufacturer Super Talent has announced its new UltraDrive MX3 SSD. This new drive is the successor to the existing UltraDrive MX2, and is allegedly twice as fast. In an interesting twist, Super Talent is releasing the MX3 in both MLC and SLC flavors, to serve the consumer and enterprise markets simultaneously with the same branded drive and controller.
The MX3 is a SATA 3 6Gbps drive that is rated at 500MB/s reads and 400MB/s writes. The MLC version will come in capacities ranging from 64GB to 512GB while the SLC flash SKUs top out at 256GB. The chart below details the model numbers at each capacity point for both the MLC and SLC SKUs, depending on what you need.
In the press release, Super Talent CEO Abraham Ma stated the following:
“We are excited to introduce the MX3. Not only does it offer a considerable upgrade in speed from its predecessor, the MX2, it is also an extremely reliable device that we believe fits the needs of our OEM and consumer customers.”
Pricing and availability have not been announced, however.
Stay tuned to PC Perspective throughout the week for more Computex 2013 news.
Get notified when we go live!