Intel and Numonyx announce vertical Phase Change Memory
Subject: Storage | October 28, 2009 - 05:00 PM | Allyn Malventano
I just got off of a conference call with Intel where they announced reaching a development milestone in the area of Phase Change Memory. PCM is exciting tech to me because it has the fast access times of RAM and the non-volatility of Flash memory.
It has previously been very difficult to stack layers of these new type of memory cells. While laying a bunch of cells out in a flat plane is relatively easy, Intel and Numonyx have jointly announced the ability to create the various parts of the cell structure in a vertical orientation. The first example of such stacking was seen in a 64Mb (megabit) die. The memory cell structure itself is created vertically instead of horizontally, integrating the memory cell (PCM) and its required switching circuit (OTS) vertically into a Phase Change Memory and Switch (PCMS). Rough figures suggest cell size could theoretically be dropped to 5nm (compared to 34nm of current NAND Flash memory produced by Intel).
One layer of the PCMS array fully integrated with a CMOS technology. The memory cell stack, including rows and columns, is shown sandwiched between M2 and M3 (not shown).
Side note for comparison: NAND Flash is not a stackable process, which is part of the reason it is so expensive relative to other storage technologies. NAND Flash must be erased in blocks, while PCM is accessed / written at the single bit level (like RAM).
Passing the vertical mark was one part of the milestone. The same new processes can be expanded to stack multiple layers on top of eachother, meaning this RAM should be able to scall very well down the road.
These are exciting developments for sure! Below is their official press release.
INTEL AND NUMONYX ACHIEVE RESEARCH MILESTONE
WITH STACKED, CROSS POINT PHASE CHANGE MEMORY TECHNOLOGY
New Research Discovery Paves Way for Scalable, Higher Density Phase Change Memory Products
SANTA CLARA, Calif., and GENEVA – Oct. 28, 2009 – Intel Corporation and Numonyx B.V. today announced a key breakthrough in the research of phase change memory (PCM), a new non-volatile memory technology that combines many of the benefits of today’s various memory types. For the first time, researchers have demonstrated a 64Mb test chip that enables the ability to stack, or place, multiple layers of PCM arrays within a single die. These findings pave the way for building memory devices with greater capacity, lower power consumption and optimal space savings for random access non-volatile memory and storage applications.
The achievements are a result of an ongoing joint research program between Numonyx and Intel that has been focusing on the exploration of multi-layered or stacked PCM cell arrays. Intel and Numonyx researchers are now able to demonstrate a vertically integrated memory cell – called PCMS (phase change memory and switch). PCMS is comprised of one PCM element layered with a newly used Ovonic Threshold Switch (OTS) in a true cross point array. The ability to layer or stack arrays of PCMS provides the scalability to higher memory densities while maintaining the performance characteristics of PCM, a challenge that is becoming increasingly more difficult to maintain with traditional memory technologies.
"We continue to develop the technology pipeline for memories in order to advance the computing platform," said Al Fazio, Intel Fellow and director, memory technology development. "We are encouraged by this research milestone and see future memory technologies, such as PCMS, as critical for extending the role of memory in computing solutions and in expanding the capabilities for performance and memory scaling."
"The results are extremely promising," said Greg Atwood, senior technology fellow at Numonyx. "The results show the potential for higher density, scalable arrays and NAND-like usage models for PCM products in the future. This is important as traditional flash memory technologies face certain physical limits and reliability issues, yet demand for memory continues to rise in everything from mobile phones to data centers."
Memory cells are built by stacking a storage element and a selector, with several cells creating memory arrays. Intel and Numonyx researchers were able to deploy a thin film, two-terminal OTS as the selector, matching the physical and electrical properties for PCM scaling. With the compatibility of thin-film PCMS, multiple layers of cross point memory arrays are now possible. Once integrated together and embedded in a true cross point array, layered arrays are combined with CMOS circuits for decoding, sensing and logic functions.
More information about the memory cell, cross point array, experiment and results will be published in a joint paper titled "A Stackable Cross Point Phase Change Memory," and will be presented at the 2009 International Electron Devices Meeting in Baltimore, Md., on Dec. 9. The paper is co-authored by Intel and Numonyx technologists and will be presented by DerChang Kau, Intel senior principal engineer.
Intel (NASDAQ: INTC), the world leader in silicon innovation, develops technologies, products and initiatives to continually advance how people work and live. Additional information about Intel is available at www.intel.com/pressroom and blogs.intel.com.
Numonyx provides a full complement of integrated NOR, NAND, RAM and Phase Change non-volatile memory technologies and products to meet the increasingly sophisticated needs of customers in the cellular, data and embedded markets. Numonyx is dedicated to providing high density, low power memory technologies and packaging solutions to a global base of customers. Additional information about Numonyx is available at www.numonyx.com.