AMD Releases Opteron 4300 and 3300 Server Processors
Subject: Processors | December 5, 2012 - 11:58 AM | Tim Verry
Tagged: servers, opteron 4300, opteron 3300, opteron, amd
AMD has officially released a number of new server processors based on its latest Piledriver cores. The new Opteron 4300 and Opteron 3300 series processors will replace the 4200 and 3200 series, and are aimed at the server market. The 4300 series uses Socket C32 while the Opteron 3300 processors use socket AM3+. They are significantly cheaper Piledriver-based parts than the higher-end Opteron 6300 series processors. AMD is aiming these lower cost Opterons at servers hosting websites and internal applications for small to medium businesses.
There are a total of nine new Opteron processors, with three being 3300 series an six being 4300 series. Both the 3300 and 4300 series Opterons are socket compatible with the previous generation 3200 and 4200 series respectively, allowing for an upgrade path in existing servers. According to AMD, the new Piledriver-based processors have 24% higher performance per watt and use 15% less power than the previous generation parts based on the SPECpower and SPECint benchmarks. AMD is also touting support for low power 1.25V memory with the new chips.
The chart below details the specifications and pricing all of the new Opteron parts.
The new AMD Opteron 3300 series includes two quad core and one eight core processor. The parts range from 1.9GHz to 2.6GHz base and have TDPs from 25W to 65W for the lowest and top end parts respectively. AMD-P, AMD-V, and AMD Turbo Core technologies are also supported. As far as memory goes, the 3300 series supports up to four DIMMs and 32GB per CPU. Further, a single x16 HyperTransport 3.0 link rated at 5.2GT/s is included.
Moving up to the 4300 series comes with an increase in price but you also get more cores, more memory, and faster clockspeeds. The Opteron 4300 series has one quad core 4310 EE, three six core CPUs, and two eight core parts. Base clocks range from 2.2GHz to 3.1GHz while boost clocks start at 3.0GHz and go to 3.8GHz. On the low end, the Opteron 4310 EE has a 35W TDP and the top-end 4386 has a 95W TDP. The 4300 series supports dual channel DDR3 1866 memory with up to six DIMMs and 192GB per CPU. Moving up from the 3300 series also gets you two x16 HyperTransport 3.0 links at 6.4 GT/s.
The new server processors are available now with prices ranging from $174 to $501. In addition, pre-built server options from Supermicro and Seamicro (SM15000) are currently available, with options from Dell and a number of other companies on the way. The prices seem decent, and these chips could make the base for a nice 2P server that brings you Piledriver improvements for much less than the relatively expensive 6300 series processors that we covered previously.