All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Motherboards | October 11, 2005 - 01:49 PM | Jeremy Hellstrom
If the high price of nForce4 boards are keeping you from moving to 64 bit computing, consider Gigabyte's GA-K8V890-9. It isn't going to outshine a comparable nVidia bases board, but it is also significantl cheaper. Head to HardwareZone for the full review of this boards capabilities.
"VIA may have become the underdogs in the chipset race, but we find out that the old dog still has some bite in it.
Subject: Motherboards | October 6, 2005 - 11:44 AM | Jeremy Hellstrom
T-break has a review of the ASRock 939Dual SATA2 up, the board with a dual personality. It will take dual core CPU's, it has Dual Channel Memory, both IDE (3) and SATA (2), an odd slot labeled "future CPU slot" and the ability to accept either an AGP 8x card, or a PCIe 16x, although not both at the same time. All that and a price that is under $100.
"The ASRock 939Dual-SATA2 has a decent set of features supporting the 939 pin based Athlon64/Dual Core CPUs with dual channel memory controller as well a
Subject: Motherboards | September 30, 2005 - 02:09 PM | Jeremy Hellstrom
It's nice to have choices, and the nForce chipset certainly offers that. The newest one to be reviewed at PCStats is the ECS KN1-SLI Extreme, with all the functionality you'd expect, and switchless SLI. Check it out.
"The ECS KN1-SLI Extreme looks like a pretty sweet motherboard for anyone on a budget who wants good performance, and the all important option of running dual PCI Express x16 SLI-compatible videocards.
Subject: Motherboards | September 28, 2005 - 04:57 PM | Jeremy Hellstrom
This board has everything, good looks, gobs of functionality and speed, in fact the only limitation that nV News could find was FSB overclocking. Not because of a specific problem with the board, but because the PCI Express bus, SATA, and the link between north & south bridges all use the same clock generator. You can't (yet) lock those frequencies in the BIOS, so you get problems with SATA and PCI Express devices if you push it too far.
"The MSI P4N Diamond has a great list
Subject: Motherboards | September 26, 2005 - 06:43 PM | Jeremy Hellstrom
Surprise, its the nForce4 SLI Intel Edition from Biostar. If you love nForce, but need to go with Intel, it's no longer a problem. The board has all you'd expect from nForce 4, with the nice simplicity of setup that BioStar tends to prefer, according to Bjorn3D. If it's not a motherboard you want, 4 new chips were announced today, one Intel and 3 AMD.
"For years, NVIDIA fans and general enthusiasts wondered if NVIDIA would ever release an Intel chipset.
Subject: Motherboards | September 23, 2005 - 12:38 PM | Jeremy Hellstrom
Just because the ECS' Nforce 4 board, the KN1 SLI is touted as a discount board, doesn't mean they skimped on the layout of the board, or the package it comes with. Read the full review at InsaneTek.
"The KN1 SLI Extreme is the latest AMD flagship motherboard from ECS. The motherboard performs well and has great overclocking potential.
Subject: Motherboards | September 21, 2005 - 07:20 PM | Jeremy Hellstrom
The Intel 945 chipset is taking it's time hitting the store, but Techniz got their hands on an offering from Gigabyte that uses it. See how well it performs with a Prescott, DDR2 and SATA2.
"The GA-8I945P Pro was featuring the new IntelÂ® 945P Express chipset with Hyper-Threading Technology delivers significant performance gains with variety of new generation architectures including the DDR2 main memory, PCI-Express interface, and Serial-ATA 2 interface for improving storage performa
Subject: Motherboards | September 12, 2005 - 05:46 PM | Ryan Shrout
HardOCP has reviewed the Abit AN8 Ultra motherboard today based on the nForce4 Ultra chipset. Looks like the guys didn't find the fanless design all that appealing...
Remember that you are hearing all of this from a person that has been a huge fan of ABIT motherboards since their introduction of the "soft bios" in the mid-90s. Based on the ABIT motherboards that I have experienced over the last year, I have to wonder if ABIT has simply lost its grip on their marketing and engineering teams.
Subject: Motherboards | September 12, 2005 - 05:39 PM | Ryan Shrout
Digitimes is reporting that the motherboard shipments for the "big four" have gone up for the month of August, a good sign for the industry as a whole.
First-tier motherboard makers Asustek Computer, Elitegroup Computer Systems (ECS), Gigabyte Technology, and Micro-Star International (MSI) shipped a combined 8.93 million motherboards in August, up 25.8-27.6% from the 7-7.1 million units they shipped during the same period last year.
As demand picked up in the traditional peak season,
Subject: Motherboards | September 7, 2005 - 03:14 PM | Ryan Shrout
Wesley over at Anandtech has posted a review of the ASRock board featuing the ULi 1695 chipset that sports both PCIe and AGP video card slots.
Many have been looking forward to the arrival of the first ULi chipset retail motherboards since our review of the ULi Reference boards. In the first Reference board review and the updated second ULi Reference, we found the performance of the on-board PCIe and AGP 8X to be both uncompromised.
Subject: Motherboards | August 31, 2005 - 03:10 PM | Ryan Shrout
I got this in my email box this morning from both ULi and ASRock. The ULi 1695 chipset supports both PCI Express x16 and native AGP 8x graphics interfaces. This particular board from ASRock also supports CPU upgrade modules and they are touting support for future M2 processors next year via one of these modules. Below is the full release I received.
Taipei, Taiwan--(BUSINESS WIRE)â€”August 31, 2005-- ULi Elect
Subject: Motherboards | August 30, 2005 - 04:27 PM | Ryan Shrout
This is just a post to point you all to my quickie coverage of the recent ECS Editor's Day that I posted in my blog yesterday.
Their other, even more daring offering, is something called Scalable Dual Graphics Engine. SDGE is an attempt to make dual GPUs a more affordable and more open platform. Theoretically, you can buy a motherboard based on any chipset that comes with two x16 PCIe slots, one of which has no PCIe actually going to it.
Subject: Motherboards | August 26, 2005 - 02:55 PM | Ryan Shrout
Here at an ECS Editor's Day in San Jose, motherboard partner ATI was on hand to showcase their upcoming CrossFire technology. We were able to get some information on ECS' upcoming CrossFire motherboards. For the Intel platform, there is the PA1 MVP and for the AMD platform there is the KA1 MVP. We also saw the first mention of the upcoming ATI R580 chipset. Here are some quick specs:
- PA1 MVP
- ATI RD400 + SB450 chipsets
- 1066 MHz FSB
- Dual channel DDR2-667 and
Subject: Motherboards | August 25, 2005 - 08:56 PM | Joe White
PC Stats put together a review of the Epox-9NPA+ SLI motherboard based on the nForce4 SLI chipset. Check it out.
"The Epox 9NPA+ SLI supports any current and future socket 939 AMD Athlon64 processor and is based on the Nvidia nForce4 SLI chipset with support for up to 4GB of PC3200 DDR memory. The Epox EP-9NPA+SLI motherboard adds on to this capability with an on board PCI Express-based Silicon Image SiI3132 Serial ATA II controller.
Subject: Motherboards | August 18, 2005 - 01:22 PM | Jeremy Hellstrom
Rojakpot examines why exactly the ASUS P5AD2 Premium, based on the old i925X chipset, constantly out performs the A
BIT AW8-MAX, based on the new i955X chipset.
"It's no secret that ASUS motherboards perform very well. But what's their secret to success? Great engineering? Or something more than that?
Subject: Motherboards | August 17, 2005 - 04:38 PM | Ryan Shrout
The gang at Tech Report has posted up an article that looks at various motherboards based on the 955X and nForce4 SLI Intel Edition chipsets for dual core Intel processors.
With our summaries complete, it's clear that none of the boards in this round-up are perfect. Each has high points and drawbacks, but a couple stand out as better options than the rest. Our first Editor's Choice recipient is an easy pick.
Subject: Motherboards | July 28, 2005 - 04:08 PM | Ryan Shrout
Touting another industry first, ECS is still showing off their upcoming PF88 motherboard that allows users to use either an Intel Pentium processor based on the LGA775 socket or a 939-pin AMD processor at their choice. It does NOT allow for usage models like running both processors at the same time, but it does attempt to helps users deal with the constantly changing processor socket platforms from both Intel and AMD.
Using a technology they are calling the "Elite Bus", ECS has setup a serial connection between the processor bridge card and other components on the mainb
Subject: Motherboards | July 26, 2005 - 02:03 PM | Ryan Shrout
HardOCP has posted a review of the ECS KN1 Extreme board based on the nForce4 Ultra chipset for the AMD platform. We are working on a board review of this solution as well.
Let's preface this by saying that this is the first ECS motherboard review we have ever completed. In the past, we have tried to review ECS' boards but they have failed so miserably in our testing that we did not see the reason to spend the resources to complete a review on them. That was, however, several years ago.
Subject: Motherboards | May 26, 2005 - 05:39 PM | Mark McKee
For those of you looking for an Nforce 4 board, you might want to check out the review of the Chaintech VNF4 Zenith VE over at MBreview.
"Overall, we were pleased with the BIOS that Chaintech has chosen to utilize with the VNF4 Zenith VE. Given that the board really isn't geared towards the high-end crowd, I was slightly surprised to see the voltage adjustment capabilities that we found.
Subject: Motherboards | May 24, 2005 - 09:54 AM | Ryan Shrout
It might sound odd coming from a reviewer, but I'd like to give this board a better score. I like the feature set, I like the price, and I like how Gigabyte is obviously t