All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: General Tech, Motherboards | November 4, 2014 - 03:19 AM | Scott Michaud
Tagged: msi, X99, motherboard, motherboards, qualcomm, killer, 802.11ac
The MSI X99S GAMING 9 AC motherboard is built for the Haswell-E architecture, and Morry did a review of it just a couple of week ago. He liked it, giving it a gold award. Now MSI has released a new model, the X99S GAMING 9 ACK, which is basically identical except for its wireless adapter. While the original AC-variant had Intel 802.11ac with dual antennas, the ACK comes with Qualcomm Killer-branded 802.11ac.
Again, for the rest of the motherboard, I will refer you to Morry's review. The only real difference is the Killer NIC and Wireless-AC combo, which is actually more than it seems. If I understand it correctly, "Smart Teaming" will monitor the specific applications using the network and split them between LAN and WiFi, with the more latency-dependent programs getting the wired connection. In theory, this is interesting except that both streams would need to merge in order to get out the internet, which will be your bottleneck. On the other hand, if this works with multiple internet connections, then I could see a use case. For instance, someone has a solid DSL connection alongside their high-bandwidth Cable ISP.
Or, of course, that could not work at all and the outbound internet will, in fact, be your bottleneck.
Pricing and availability is also not available. You can find the original X99S GAMING 9, with the Intel wireless network controller, for about $405. An upgraded wireless adapter should not increase the cost much at all.
Subject: General Tech, Motherboards | November 4, 2014 - 01:12 AM | Scott Michaud
Tagged: X99, overclocking, msi, mpower, motherboards, motherboard
The X99S XPOWER is MSI's top-of-the-line overclocking motherboard. The company has just introduced the X99S MPOWER to complement it on their product stack. It is a similar motherboard with a smaller price tag that was reduced by removing a few optional features (I will outline the major differences, below). These are basically unrelated to performance and overclocking, minus the buttons to set the base clock on the motherboard itself and a couple of accessories (the XPOWER comes with a free Delid Die Guard and temporary fan stand). It is more things like the number of I/O ports.
The main differences with the MPOWER are:
- It does not have the fifth, eight-lane PCIe slot, just the four provided by Haswell-E.
- It has one Intel Gigabit Ethernet adapter, instead of two.
- It does not have built-in 802.11ac WiFi or Bluetooth.
- It has two less USB 3.0 ports (external).
- It has one less USB 2.0 port (internal, seemingly the "Direct USB" port for BIOS updates).
- It does not come with a Delid Die Guard or fan stand.
There are a few other differences, such as the XPOWER having an I/O port cover and a few extra on-board overclocking switches and buttons, but I cannot see anything that stands out. The current price difference is about 115$ at Newegg, which is a healthy saving if nothing is a deal-killer.
Subject: Motherboards | October 23, 2014 - 01:19 PM | Jeremy Hellstrom
Tagged: asrock, Z97 Extreme6, Broadwell, haswell
For just under $200 the ASRock Z97 Extreme is a good base to build a Broadwell or Haswell platform on for significantly less than a brand new Haswell-E system. The design is quite clean and well spaced out to allow the use of a large cooler along with integral heat sinks improving the looks and thermals of the motherboard. The first two PCIe 3.0 16x slots share 16 lanes between them, the third slot is PCIe 2.0 and is limited to a maximum of two lanes, with two 1x and a mini PCIe slot each getting one lane. Four of the remaining PCIe 3.0 lanes are taken up by the M.2 socket, which gives you up to 32Gbps of transfer speed, not too shabby for a Z97 board. There are a lot of other features, including two separate physical UEFI chips and a very comprehensive software suite to manage the system, which you read about at The Tech Report.
"With Broadwell compatibility and a secondary M.2 socket connected to four PCIe Gen3 lanes in the CPU, ASRock's Z97 Extreme6 might just be the most future-proof Haswell motherboard around. It's surprisingly affordable, too, despite having loads of other extras. Read on for more on a truly unique Z97 contender."
Here are some more Motherboard articles from around the web:
Subject: Motherboards | October 12, 2014 - 01:27 AM | Tim Verry
Tagged: z97, PCI-E 3.0, mini ITX, M.2, L337 Gaming, intel i218v, haswell, ECS
ECS recently introduced the mini ITX Z97I-DRONE under its L337 Gaming series. This new motherboard is aimed at gamers and overclockers looking to put together a high end small form factor system based around Intel’s Haswell processor and Z97 Express chipset.
The Z97I-DRONE is a mini ITX form factor board measuring 170mm x 170mm. It is based around the Intel Z97 Express chipset and supports Haswell processors. ECS has integrated several features aimed at gamers including Sound Blaster Cinema 2 audio, PCI-E 3.0, and an Intel I218V NIC. Beyond that, the Z97I-DRONE also incorporates high end power management hardware that enables overclocking. ECS uses what it calls “Hybrid Power” technology on the new mini ITX board which entails a 5-phase PWM to manage stable power delivery to the processor and memory, dual MOSFETs (which are reportedly 90% power efficient), Nichicon Japanese capacitors, and Icy Chokes which ECS states are more stable and produces 13% less heat versus ferrite chokes.
The internal layout is unique, with the internal headers, PCH, and five SATA III ports placed along the top half of the motherboard and the LGA 1150 socket sitting in the bottom right corner. The right edge of the board hosts two dual channel DDR3 memory slots that support a maximum of 16GB clocked at 3000+ MHz when overclocked. The power management “Hybrid Power” hardware sits to the left of the processor socket. A single PCI-E 3.0 x16 slot sits on the bottom edge of the board. Further, Morry will be ecstatic to know that the CMOS battery is vertically mounted on the opposite side of the GPU slot and sits directly to the left of the M.2 slot above the processor socket (to the right of the southbridge). The board has internal headers for two USB 3.0 ports and two USB 2.0 ports. ECS is using a Realtek ALC1150 8-channel audio codec to drive the audio outputs and an Intel I218V Gigabit LAN NIC for networking.
Rear IO on the mini ITX Z97I-DRONE consists of the following ports:
- 4 x USB 2.0
- 3 x Video Outputs
- 1 x DVI
- 1 x DisplayPort
- 1 x HDMI
- 4 x USB 3.0
- 1 x RJ45 (Intel I218V)
- 6 x Audio Outputs
- 5 x Analog Audio
- 1 x Optical S/PDIF
Pricing and availability have not yet been announced, but if you are interested in this board keep an eye on this ECS product page.
Also read: ECS 2014 Press Event: LIVE, LIVA, LEAD, L337 @ PC Perspective.
Subject: Motherboards | October 9, 2014 - 06:41 PM | Jeremy Hellstrom
Tagged: gigabyte, Intel X99, X99-UD4
Gigabyte's X99-UD4 is going with a more aesthetically clean design than other X99 boards have been sporting, although it does have a 30-µm gold layer on the CPU socket, DIMM slots, and PCIe x16 slots so don't think they skipped out on the design. Cooper Bussmann chokes and solid-state capacitors as well as International Rectifier's PowIRstage all-digital circuitry explain both the high power efficiency and smooth overclock settings that The Tech Report found when benchmarking this board. However if you really want to see the most impressive feature on this board you have to head over and watch the video on the first page of the review.
"Buying into Intel's high-end desktop platform doesn't have to be exorbitantly expensive. Gigabyte's X99-UD4 motherboard offers an affordable path to Haswell-E, and it doesn't skimp on quality hardware or extra perks. We've taken a closer look at the board to see if the rest of it measures up."
Here are some more Motherboard articles from around the web:
- MSI X99S XPower AC @ [H]ard|OCP
- EVGA X99 Classified motherboard @ Bjorn3d
- Kitguru TV: Which Gigabyte X99 board to choose?
- MSI X99S Xpower AC @ Bjorn3D
- ASRock Fatal1ty X99M Killer Motherboard @ Hardware Secrets
- GIGABYTE GA-X99-Gaming G1 WiFi Motherboard Review @ Legit Reviews
- ASUS X99-DELUXE Motherboard @ Hardware Secrets
- ASUS X99 DELUXE (Intel LGA 2011-3) @ techPowerUp
- ASRock X99 OC Formula @ Kitguru
- ASUS RAMPAGE V EXTREME Motherboard @ Hardware Secrets
- Biostar A68N-5000 Motherboard Overview and Review @HiTech Legion
- Biostar A68N-5000 @ Hardware Heaven
Subject: General Tech, Graphics Cards, Motherboards, Cases and Cooling | September 28, 2014 - 12:25 AM | Ryan Shrout
Tagged: X99, video, maxwell, live, GTX 980, GTX 970, evga
UPDATE: If you missed the live stream with myself and Jacob, you can catch the entire event in the video below. You won't want to miss out on seeing the first ever GTX 980 water block as well as announcements on new Torq mice!
EVGA has been a busy company recently. It has continued to innovate with new coolers for the recent GTX 980 and GTX 970 card releases, newer power supplies offer unique features and improved quality and power output, a new line of X99 chipset motherboards including a Micro ATX variant and hey, the company even released a line of high-performance mice this year! PC Perspective has covered basically all of these releases (and will continue to do so with pending GPU and MB reviews) but there is a lot that needs explaining.
To help out, an industry and community favorite will be stopping by from EVGA to the PC Perspective offices: Jacob Freeman. You might know him as @EVGA_JacobF on Twitter or have seen him on countless forums, but he will making an in-person appearance on Friday, September 26th on PC Perspective Live! We plan on discussing the brand new ACX 2.0 cooler on the Maxwell GPUs released last week, go over some of highlights of the new X99 motherboards and even touch on power supplies and the Torq mice line as well.
EVGA GTX 980/970, X99, PSU and Torq Live Stream featuring Jacob Freeman
3pm ET / 12pm PT - September 26th
EVGA has been a supporter of PC Perspective for a long time and we asked them to give back to our community during this live stream - and they have stepped up! Look at this prize list:
- 1 x EVGA GeForce GTX 980 SC
- 1 x EVGA GeForce GTX 970 SC ACX 2.0
- 1 x EVGA X99 Classified
- 1 x EVGA X99 FTW
- 1 x EVGA X99 SLI
- 1 x EVGA SuperNOVA 750 G2 PSU
- 4 x Torq Mice
How can you participate and win these awesome pieces of hardware? Just be here at 3pm ET / 12pm PT on http://www.pcper.com/live and we'll be announcing winners as we go for those that tune in. It really couldn't be more simple!
If you have questions you want to ask Jacob about EVGA, or any of its line of products, please leave them in the comments section below and we'll start compiling a list to address on the live stream Friday. Who knows, we may even save some prizes for some of our favorite questions!
To make sure you don't miss our live stream events, be sure you sign up for our spam-free PC Perspective Live! Mailing List. We email that group a couple hours before each event gets started.
Subject: General Tech, Motherboards, Processors | September 20, 2014 - 06:51 PM | Scott Michaud
Tagged: xeon, Haswell-EP, ddr4, ddr3, Intel
Well this is interesting and, while not new, is news to me.
The upper-tier Haswell processors ushered DDR4 into the desktops for enthusiasts and servers, but DIMMs are quite expensive and incompatible with the DDR3 sticks that your organization might have been stocking up on. Despite the memory controller being placed on the processor, ASRock has a few motherboards which claim DDR3 support. ASRock, responding to Anandtech's inquiry, confirmed that this is not an error and Intel will launch three SKUs, one eight-core, one ten-core, and one twelve-core, with a DDR3-supporting memory controller.
The three models are:
|E5-2629 v3||E5-2649 v3||E5-2669 v3|
|Cores (Threads)||8 (16)||10 (20)||12 (24)|
|Clock Rate||2.4 GHz||2.3 GHz||2.3 Ghz|
The processors, themselves, might not be cheap or easily attainable, though. There are rumors that Intel will require customers purchase at least a minimum amount. It might not be worth buying these processors unless you have a significant server farm (or similar situation).
Subject: Motherboards | September 19, 2014 - 03:41 PM | Jeremy Hellstrom
Tagged: evga, X99, X99 Classified
The EVGA X99 Classified is definitely a premium board as it carries a $400 price tag and Legit Reviews took a look at it to see if it was worth the price. It certainly comes with a lot of extras including 2-way, 3-way and 4-way SLI Bridges in addition to an assortment of other cables and headers. As is implied this board can support 4 way SLI or CrossFire with it's five PCIe x16 slots as well as a 4x slot. It bears two M.2 ports, one a type 2 and one type 3 as well as an onboard Creative Sound Core3D codex. The overclocking potential is good, Legit hit Core i7-5960X at 4.5GHz at only 1.33V and they highly recommend it to anyone that can afford it.
"EVGA has been known as some of the best components out there for some time now. Today I have the opportunity to look at the flagship motherboard from their Intel X99 product stack. The EVGA X99 Classified motherboard (151-HE-E999-KR) is hitting the shelves with a retail price of only $399.99! The EVGA X99 Classified isn’t geared for the casual overclockers, it’s built for those that want to push the Intel core i7-5960X to the extreme speeds using liquid nitrogen and other sub-ambient cooling methods. Read on to see how this board performs!"
Here are some more Motherboard articles from around the web:
- Asus X99 Deluxe @ Kitguru
- Gigabyte X99 UD4 @ eTeknix
- ASUS X99-DELUXE @ Benchmark Reviews
- ASUS MAXIMUS VII FORMULA/WATCH DOGS Motherboard @ Hardware Secrets
- ASUS Z97-A (Intel LGA 1150) @ techPowerUp
- ASUS Maximus VII Formula – Top End ROG Gaming For Z97 @ Bjorn3D
- ASUS Maximus VII Formula @ [H]ard|OCP
- ASRock D1800B-ITX Motherboard @ Hardware Secrets
Subject: Motherboards | September 11, 2014 - 04:50 PM | Jeremy Hellstrom
Tagged: magic smoke, linux, Intel X99, MSI X99S SLI Plus
It is inevitable that one will eventually come across hardware with a defect, either a flaw during its manufacture or because of shipping or user damage and when you do reviews the increased sample size pits the odds against you. This is why Phoronix has not been able to publish results of the i7 5960X on an MSI X99S SLI Plus motherboard as magic smoke was released upon initial boot up. The board has been RMA'd to NewEgg and MSI has contacted Phoronix directly to let them know they will be sending it off for analysis; a new motherboard and review should be up shortly. It just goes to show you that this sort of thing can happen to anyone but if you keep your temper in check all it is is a small hurdle not a huge obstruction and you will get to where you wanted to go eventually. Similar events involving mysterious smells and old UPSes have never occurred here at PC Perspective; especially not today.
I feel fine!
"This weekend I was planning to publish the first Linux benchmarks for Intel's incredibly powerful Core i7 5960X Haswell-E processor with X99 motherboard and DDR4 system memory. Unfortunately, all I can tell you now is that it's smoking, quite literally!"
Here are some more Motherboard articles from around the web:
- ASUS Rampage V Extreme @ eTeknix
- Gigabyte GA-X99-SOC Force LN2 Motherboard w/ Special LGA2011-v3 CPU Socket @ Legit Reviews
- MSI X99S XPOWER AC @ eTeknix
- Gigabyte GA-Z87N-WIFI Mini-ITX @ benchmark Reviews
- Gigabyte X99 Gaming 5 @ eTeknix
- ASUS Z97 Sabertooth MARK1 Motherboard Review @HiTech Legion
- ASRock D1800M Motherboard @ Hardware Secrets
Subject: Motherboards | September 11, 2014 - 01:18 PM | Jeremy Hellstrom
Tagged: Z10PE-D8 WS, C612, asus
Finally some new dual socketed goodness from Intel that can be used by prosperous enthusiasts. For those who can afford the pair of Xeon E5-2600 V3 CPUs required to run a dual CPU system you can have 4 PCIe 16x slots running at full speed and compatible with both SLI and CrossFire. The motherboard is more optimized for heavy productivity workloads such as graphics rendering but that is no reason not to use it to build the biggest and baddest gaming machine on the planet!
Fremont, CA (10th September, 2014) - ASUS today announced the Z10PE-D8 WS motherboard based on the Intel C612 chipset and with dual processor sockets ready for the latest Intel Xeon processor E5-2600 v3 product families.
The new Server System Infrastructure Enterprise Electronics Bay (SSI EEB) motherboards have superb storage support, including the ASUS PIKE II (Proprietary I/O Kit Expansion) card and support for PCI Express (PCIe) 3.0 x4 M.2 (Next-Generation Form Factor, or NGFF). They benefit also from the ASUS Q-Code Logger for one-touch easy maintenance and a Dr. Power LED lamp to clearly indicate unusual power status.
Ultimate PCI Express 3.0 multi-GPU power
The Z10PE-D8 WS is equipped to provide the ultimate workstation graphics power, with support for up to four dual-slot graphics cards. Both 4-Way NVIDIA GeForce SLI and AMD CrossFireX are supported, so it is an excellent choice for professionals who depend on powerful graphics in areas such as design, modeling and medical research, as well as processing-intensive simulation and rendering applications.
With a total of seven PCIe 3.0 slots, the Z10PE-D8 WS offers ample room for RAID cards, PCI Express-based solid-state drives (SSDs), video-capture cards and other high-speed components.
Premium components for premium power efficiency
Z10PE-D8 WS benefits from premium components hand-chosen and carefully arranged by ASUS engineers to provide optimum power efficiency. These include integrated Driver-MOSFETs (Dr. MOS) to save space and reduce operating temperatures for more efficient operation, and ASUS-exclusive Beat Thermal Chokes II. The new Beat Thermal Chokes II design delivers up to 94% power efficiency and lower temperatures under normal operation.
ASUS is the world’s first server manufacturer to introduce 12K solid capacitors — the Z10PE-D8 WS has these ultra-resilient components on board. These Japanese-made capacitors are able to withstand up to 12,000 hours of temperatures as high as 105°C, far exceeding everyday demands. And at a typical operating temperature of 65°C, our 12K capacitors have an expected lifespan of 1.2m hours — or well over a century.
The Z10PE-D8 WS also employs ProCool power connectors. The ProCool design eliminates hollow areas associated with traditional power connectors, ensuring a close and secure connection with the PSU power connector pins. The flush connection enables lower impedance and better heat dissipation – helping to prevent connector burnouts.
Flexible fan speed control, flexible storage and easy maintenance
The new Z10PE-D8 WS motherboard offers flexible fan-speed controls, which can be managed manually or automatically. In automatic mode, the fan speeds are adjusted according to the processor temperature. In manual mode, the administrator can set a fan curve according to cooling requirements.
The new Z10PE-D8 WS motherboard offers industry-leading storage flexibility, with a built-in M.2 connector supporting PCIe 3.0 x4 2260 (60mm), 2280 (80mm) and 22110 (110mm) devices, and support for the ASUS PIKE II (Proprietary I/O Kit Expansion) card for high-reliability, enterprise-grade 12Gbit/s Serial Attached SCSI (SAS) devices.
The motherboard also benefits from ASUS Q-Code Logger, an easy-maintenance button that records four-digit port 80 code logs to a flash drive with one touch, so administrators can diagnose problems quickly and easily. Similarly, the conveniently-located Dr. Power LED displays messages to clearly indicate a power fault.
AVAILABILITY & PRICING
The Z10PE-D8 WS is priced at $599 and will be available soon at ASUS authorized resellers and distributors.
Subject: Motherboards, Processors, Chipsets, Memory, Storage | September 5, 2014 - 01:21 PM | Ryan Shrout
Tagged: X99-Deluxe, SSD 730, Intel, Haswell-E, ddr4, asus, 5960X
Okay, I'll be the first to admit that I didn't know what I was getting into. When a couple of packages showed up at our office from Intel with claims that they wanted to showcase the new Haswell-E platform...I was confused. The setup was simple: turn on cameras and watch what happens.
So out of the box comes...a containment chamber. A carefully crafted, wood+paint concoction that includes lights, beeps, motors and platforms.
Want to see how Intel promotes the Core i7-5960X and X99 platform? Check out this video below.
Our reviews of products included in this video:
Subject: Motherboards | September 4, 2014 - 06:15 PM | Jeremy Hellstrom
Tagged: X99 Deluxe, X99, Haswell-E, asus
You can immediately spot the ASUS X99 Deluxe thanks to the unique white heatsink and shielding around the audio and peripheral ports but there is more to this board than just its looks. The board is well laid out but due to the amount of features included there is a bit of crowding but you can still fit two triple-wide graphics cards or three double-wide on the board if you have a 40 lane PCIe CPU. They have also come up with a different orientation for M.2 SSDs, which will sit vertically in a bracket freeing up space and getting them away from major sources of heat which could provide performance benefits. To get the full list of features you will need to read through The Tech Reports full review right here. Of course, that assumes you are already completely familiar with Morry's review.
"Haswell-E is finally here, and so is a new wave of motherboards based on its X99 companion chip. We've spent some quality time with Asus' X99 Deluxe, which combines all the goodness baked into the platform with a luxurious array of additional features."
Here are some more Motherboard articles from around the web:
- ASUS X99 Deluxe LGA 2011-v3 @ [H]ard|OCP
- ASUS X99-DELUXE @ Benchmark Reviews
- MSI X99S Gaming 9 @Bjorn3d.com
- ASUS X99 Motherboard Launch Coverage @ eTeknix
- ASUS X99 Deluxe - A new look and features for ASUS X99! @ Bjorn3D
- ASUS X99-Deluxe LGA2011-v3 Motherboard Review @ Legit Reviews
- MSI X99S GAMING 7 (Intel LGA 2011-3) @ techPowerUp
- ASUS H97-PRO GAMER Motherboard @ Hardware Secrets
- GIGABYTE Z97X-Gaming G1 WIFI-BK Motherboard Review @ Techgage
- MSI Z97 XPOWER AC Review @ OCC
Subject: Motherboards | August 30, 2014 - 01:10 PM | Tim Verry
Tagged: xeon, x99 ws, X99, workstation, socket 2011-3, Intel, Haswell-E, asrock
Alongside the X99 Extreme6 for enthusiasts, ASRock has launched the X99 WS (E-ATX) motherboard for professional workstations and servers. The board uses a black PCB, blue aluminum heatsinks on the power phase and PCH areas, and gold colored caps. The E-ATX motherboard uses short screws and a thinner CPU socket backplate to allow it to fit into 1U server cases. You have ample PCI-E slots, DDR4 (and ECC RDIMMs), USB 3.0, Thunderbolt 2 (with an AIC), eSATA, M.2, and SATA III for connectivity. Power is regulated by a 12 power phase "Digi Power" design with high quality Ultra Dual-N MOSFETs, 60A chokes, 12K Nichicon capacitors.
The X99 WS also uses larger heatsinks, especially around the CPU area. The board features an Intel LGA 2011-3 socket that will accept Haswell-E or Xeon E5-1600/2600 v3 processors up to 18 cores and 160W TDPs. Eight memory slots surround the CPU socket and support a maximum of 128GB of DDR4 3200+ memory. Storage is handled by 10 SATA III 6Gbps ports and a single "Ultra M.2" slot that supports SATA III or PCI-E x4 controller equipped drives.
This worskation board takes advantage of the Extended ATX form factor to cram in additional PCI-E 3.0 slots versus the shorter X99 Extreme6. A PCI-E 2.0 x 16 slot sits directly below the CPU socket followed by the (mentioned above) M.2 slot and five PCI-E 3.0 x 16 slots. The five PCI-E 3.0 slots allow for 4-Way CrossFireX and 4-Way SLI multi-GPU setups. To take full advantage of this board, you will want to pair it with the higher end Haswell-E parts (5930K, 5960X, et al) with the full 40 lanes rather than the entry level 5820K with its limited 28 PCI-E lanes.
Using internal headers, the X99 WS supports a TPM module, two COM ports, two USB 3.0 ports, four USB 2.0 ports, and a Thunderbolt port (via an extra add-in-card). It features two CPU fan and three chassis fan headers as well.
The X99 WS features the following ports on the rear IO panel.
- 1 x PS/2
- 4 x USB 2.0
- 1 x eSATA
- 4 x USB 3.0
- 2 x Gigabit LAN
- 1 x Intel I217LM
- 1 x Intel I210AT
- 7.1 Channel Audio (Realtek ALC1150)
- 5 x Analog audio outputs
- 1 x Optical audio output
The X99 WS is available now with a three year manufaturer warranty for $323.99. The price alone pushes this board well into the professional market, but gamers can get most of the way to the WS feature-wise with the X99 Extreme6. The WS goes up against the boards like the ASUS X99-Deluxe and MSI X99S XPOWER AC.
Subject: Motherboards | August 30, 2014 - 01:43 AM | Tim Verry
Tagged: X99, socket 2011-3, lga 2011, Haswell-E, atx, asrock
Today, ASRock unveiled the X99 Extreme6 motherboard, a high end board for enthusiasts featuring Intel's X99 chipset and support for Haswell-E processors and all of the latest connectivity options (short of SATA Express).
This ATX motherboard uses a black PCB, gold capacitors, and blue heatsinks to create an appealing color scheme. A 12 power phase "Digi Power" design feeds the LGA 2011-3 CPU socket. Eight total DDR4 memory slots surround the processor socket (four on each side) with support for up to 128GB of DDR4 running at 3000+MHz (w/ requisite CPU/IMC overclock).
The bottom half of the motherboard hosts the PCI-E slots, PCH, and 10 SATA 3 ports. Specifically, the X99 Extreme6 features three PCI-E 3.0 x16 slots (supporting Triple SLI or CrossFire), two PCI-E 3.0 x1 slots, a single Mini PCI-E connector, and one "Ultra M.2" PCI-E 3.0 x4 M.2 slot for SSDs. Ten right angled SATA III 6Gbps ports sit to the right of the southbridge.
Using internal headers, users can add four USB 3.0, four USB 2.0, one Thunderbolt port (requires an add-on card to work), and one COM port(s) for additional connectivity and connecting case front panel ports.
Rear IO on the Extreme6 includes:
- 1 x PS/2
- 2 x USB 2.0
- 6 x USB 3.0
- 1 x eSATA
- 7.1 Channel Purity Sound 2 Audio (Realtek ALC1150)
- 5 x Analog audio
- 1 x Optical audio output
- 2 x Gigabit Ethernet ports
- 1 x Intel 1218V NIC
- 1 x Qualcomm Atheros NIC
The X99 Extreme6 is part of ASRock's new "Super Alloy X99" lineup. It is available now from retailers for $279.99 with a three year manufacturer warranty.
Also read: Haswell-E: The Intel Core i7-5960X 8-core Processor Review at PC Perspective.
Subject: Motherboards | August 29, 2014 - 04:15 PM | Jeremy Hellstrom
Tagged: msi, X99, x99s sli plus, X99S GAMING 9 AC, X99S GAMING 7, X99S XPOWER AC, X99S MPOWER
MSI, world leading in motherboard technology, is pleased to announce the launch of the new MSI X99 motherboards line-up. Featuring 5 models, the X99S GAMING 9 AC, X99S GAMING 7, X99S XPOWER AC, X99S MPOWER and X99S SLI PLUS, MSI caters to everyone’s needs. With a long history of unique high performance motherboards under any condition, MSI X99 motherboards are based on Military Class 4 components and come packed with a freight train of features. All MSI X99 motherboards feature Turbo M.2 to maximize M.2 performance up to 32 Gb/s and SATA Express for the latest technology in data storage. MSI X99 also offers full support for Quad SLI and CrossFire configurations, whether you demand the highest performance when GAMING, Overclocking or rendering graphics.
MSI X99 GAMING for the best gaming experience
Inheriting true GAMING DNA, years of building the best motherboards, closely working with world’s best gamers and collecting over 300 awards from worldwide media, MSI proudly presents the next generation of GAMING motherboards. MSI X99 GAMING motherboard comes equipped with the evolution of the best on-board audio solution called Audio Boost 2, Killer networking and support for Turbo M.2 32 Gb/s and SATA Express devices together with other key gaming features. Its masterpiece is Streaming Engine, featured on MSI X99S GAMING 9 AC, which is a dedicated onboard hardware streaming solution for streaming gaming activities at 1080p 60Mbps without impacting FPS. Time for hi-end GAMING with MSI.
A new round of breaking world records
The Overclocking Champion returns. After generations of proven world class overclocking performance, MSI is proud to add the X99S XPOWER AC motherboard to this glorious family. Top overclockers around the world relying on nothing but the best were involved in its birth. With each model built with Military Class 4 components and specifically tuned for an overclocking segment, MSI’s OC Certified models deliver stability and top overclocking performance with the latest Intel HEDT CPUs.
Clever solutions are once again handed to devoted overclockers to help break world records. DirectUSB is available for easy USB flashing and saving scores. This series features a new OC Backplate, a smart solution for overclockers to mount their LN2 pot, and Delid Die Guard to make mounting a cooling solution easier, safer and to help squeeze every last MHz out of the a delidded CPU. The next generation OC Engine is offers a dedicated Clock Generator for more flexible BCLK adjustments, from 100 / 125 / 167 MHz straps. Using these straps prevents system crashing while overclocking on the edge and opens doors to achieve the absolute maximum. The next generation chip offers even lower jitter and power consumption resulting in even higher stability under the most extreme conditions.
Stable and highly efficient, packed with features
The new MSI X99S SLI PLUS motherboard presents an arsenal of new features and improvements as well as technical ingenuity. Offering reliable and fast Gigabit LAN from Intel and Nvidia SLI support for enthusiasts looking to pair up multiple graphics cards. Delivering speeds up to 32Gb/s, Turbo M.2 is more than 5 times faster than a regular SATA III 6 Gb/s connection. Turbo M.2 32 Gb/s is the successor to M.2 10 Gb/s, offering performance up to 3 times more performance. M.2 is packed in a small form factor and is compatible with 3 different sizes to fit all M.2 devices. SATA Express is supported up to 10 Gb/s. Gamers can enjoy blazing fast system boot up and loading of applications and games. GuardPro and Military Class 4 provide all the stability you need through carefully selected and thoroughly tested components and materials.
Subject: Motherboards | August 29, 2014 - 12:37 PM | Jeremy Hellstrom
Tagged: asus, X99, Rampage V Extreme, X99 Deluxe, X99-E WS
Fremont, CA (29th August, 2014) - ASUS today announced the X99-Deluxe, X99-Pro and X99-A, three new ATX motherboards based on the new Intel X99 chipset. Packed with exclusive technologies, including OC Socket and 5-Way Optimization, ASUS’ X99 motherboards ensure ultimate performance from the latest LGA 2011-v3 Intel Core i7 processors.
The X99-Deluxe is the flagship model, with a bundled ASUS Hyper M.2 x4 expansion card for ultra-fast 32Gbit/s transfer speeds; onboard 3x3 antenna 802.11ac for ultra-fast Wi-Fi speeds of up to 1,300Mbit/s; and an ASUS Fan Extension Card for flexible cooling options.
All new X99 Series motherboards feature Crystal Sound 2 audio, Turbo LAN technology for lag-free online gaming, a plethora of advanced software features and our renowned UEFI BIOS for intuitive setup and platform control. With a refined look, the ASUS X99 motherboard lineup delivers the cutting-edge performance and style demanded by PC enthusiasts
OC Socket for extended overclocking headroom and ASUS 5-Way Optimization X99 Series motherboards are equipped with a brand-new ASUS innovation — our patent-pending OC Socket. This unique socket includes extra pins that connect proprietary circuitry to extra contacts found on Haswell-E's land grid array (LGA) and is 100% compatible with Intel’s new LGA 2011-v3 (‘Haswell-E’) processors. In combination with the ASUS UEFI BIOS, OC Socket enables higher DDR4 memory frequencies, lower memory latencies and enhanced stability while overclocking, extending all the way to extreme overclocking conditions, such as Liquid Nitrogen (LN2).Users are also able to increase DDR4 memory frequencies to 3200MHz and beyond, even with all eight DIMM slots populated.
Rampage V Extreme
PC enthusiasts also benefit from exclusive 5-Way Optimization technology to dynamically optimize an X99-Deluxe, X99-Pro or X99–A based PC with one click. First up is Turbo Processor Unit (TPU), a custom microprocessor that provides automated overclocking and advanced voltage controls – catering for novice and advanced users. Then there’s Energy Processing Unit (EPU) to deliver system-wide real-time power savings, controlled via a simple onboard switch or the easy-to-use AI Suite 3 utility.
5-Way Optimization technology also encompasses tuning of the Digi+ voltage-regulator module (VRM) to enhance performance, increase efficiency and ensure reliability, and Fan Xpert 3 for peerless fan calibration and control. Completing the 5-Way Optimization technology line-up is Turbo App, an intuitive tuning panel to tailor and boost all parts of the system for specific games or programs.
Loaded with extreme hardware for extreme builds
The X99-Deluxe is a high-end motherboard loaded with extras for the ultimate in enthusiast PC builds. The bundled Hyper M.2 x4 expansion card gives users flexibility to equip their systems with up to two M.2 devices - providing transfer speeds of up to 32Gbit/s. Hyper M.2 x4 supports M.2 devices from the smallest 30mm (2230) to full-length 110mm (221100) cards.
The supplied ASUS Fan Extension Card provides flexible additional cooling in the shape of three 4-pin/3-pin fan headers. As with all fan headers on ASUS X99 motherboards, the Fan Extension Card features hardware-level PWM or DC control modes – for setting the best control curve for high performance or “silent” PCs.
The X99-Deluxe also features super-fast 802.11ac wireless connectivity on board. The 3x3 antenna configuration enables wireless speeds of up to 1,300Mbit/s. In common with the other X99-series motherboards, the X99-Deluxe supports the ASUS ThunderboltEX II expansion card. This gives users the freedom to add Thunderbolt 2 connectivity to X99-Deluxe at any time for bi-directional transfer speeds up to 20Gbit/s — that's four times (4X) faster than USB 3.01.
AVAILABILITY & PRICING
The X99-Deluxe is priced at $399 and will be available now at authorized ASUS resellers and distributors. The X99-A lands with an MSRP of $279 and will be available from early September, while the X99-Pro is expected in early October, price TBD.
Subject: Motherboards, Memory | August 29, 2014 - 12:25 PM | Jeremy Hellstrom
Tagged: X99, ddr4, corsair, asus, Dominator Platinum, X99-Deluxe, Rampage V Extreme
PAX Prime, Seattle —August 29, 2014 — Corsair, a worldwide leader in high-performance PC components and ASUS a worldwide leader in motherboards, today announced the availability of the Corsair Dominator Platinum DDR4 memory kits in 3300MHz, 3200MHz and 3000MHz speeds – the world’s fastest production memory kits. Corsair developed the new high-speed DDR4 memory in close collaboration with ASUS, tuning and validating the memory timings to take advantage of the optimized DRAM layout and UEFI firmware of ASUS’s new X99 motherboards. The new Dominator DDR4 memory kits, when paired with the ASUS X99 Deluxe and Rampage V Extreme motherboards, creates some of the fastest, most stable enthusiast PC platforms available for the new Intel Core i7 processors (codenamed Haswell-E).
“Our rigorous validation with ASUS has enabled us to make Dominator Platinum 3300MHz the fastest desktop DDR4 memory available at launch,” said Thi La, Chief Operating Officer at Corsair. “Our OC team and engineers are excited to see such performance headroom the new Intel platform and are looking forward to releasing even faster kits in the near future.”
“It is always exciting when two companies renowned for being at the forefront of innovation and pushing performance boundaries work together to create new products for end-users. The combination of ASUS X99 motherboards with Corsair Dominator Platinum ushers in a new era of memory performance and stability for enthusiasts,” Joe Hsieh, ASUS Corporate Vice President and General Manager of the Motherboard and Desktop System Business Unit.
Corsair Dominator Platinum DDR Memory
Dominator Platinum memory kits have a striking industrial design for good looks, patented DHX technology for cooler operation, user-swappable colored “light pipes” for customizable downwash lighting, and Corsair Link compatibility for real-time temperature monitoring. Dominator Platinum memory is built with hand-screened ICs, undergoes rigorous performance testing, and incorporates state-of-the-art cooling for reliable performance in demanding environments.
The ASUS X99-Deluxe and Rampage V Extreme
The ASUS X99-Deluxe and Rampage V Extreme feature an enhanced CPU socket and DRAM trace layout to improve signal integrity, providing increased overclocking headroom and stability over reference designs. This is coupled with a highly customized and refined UEFI firmware that allows easy setup and tweaking – perfect for getting the most from Corsair Dominator Platinum memory.
Availability and Warranty
The DDR4 memory kits are available in Corsair’s Vengeance LPX and Dominator Platinum lines. The memory kits are available immediately via Corsair’s worldwide network of authorized distributors and resellers and are backed by a lifetime warranty.
The ASUS X99-Deluxe and Rampage V Extreme motherboards are available now at ASUS authorized distributors and resellers worldwide. Both motherboards are covered by a three year warranty with advanced replacement in the first year.
Subject: Motherboards | August 23, 2014 - 11:45 PM | Tim Verry
Tagged: X99, socket 2011-3, Intel, Haswell-E, evga, ddr4, classified
As Intel's next generation enthusiast desktop platfom gets closer to fruition, several leaks (such as Gigabyte's X99 manual) and motherboard teasers have surfaced on the Internet. A few days ago, EVGA posted a teaser photograph of an upcoming "next generation" Micro ATX motherboard on its Instagram page.
The so-called EVGA X99 Micro is set to be the company's smallest Classified-branded X99 chipset offering supporting multiple graphics cards, DDR4 memory, and (of course) Intel's upcoming Haswell-E processors. The all-black motherboard features black heatsinks over the PCH and power delivery hardware. It is outfitted with a 10-phase VRM that feeds the CPU socket (socket 2011-3), two DDR4 memory sockets on each side of the processor socket, three PCI-E 3.0 x16 slots (just enough to max out a Core i7-5820K), one M.2 connector, and six SATA III 6Gbps ports. The board will support USB 3.0 and USB 2.0 ports, but beyond that it is difficult to say what the exact rear IO port configuration will be as a metal shield blocks off the ports in the teaser photo. There is an eight pin CPU power connector along with a 24-pin ATX connector for getting power to the board. Overclockers will be further pleased to see physical power and reset buttons.
According to Maximum PC, this pint sized Classified motherboard will be priced around $250 USD making it one of the most expensive mATX motherboards around. As part of EVGA's Classified series, it should be packing plenty of overclocking friendly features in the UEFI firmware and hardware build quality. This could make for one heck of a powerful small form factor system though, and I'm looking forward to seeing what people are able to get out of this board (especially when it comes to overclocking Haswell-E)!
Subject: Motherboards | August 22, 2014 - 02:26 PM | Jeremy Hellstrom
Tagged: Z97-A, lga 1150, Intel, asus
At $145 the ASUS Z97-A is an inexpensive base for a system and yet it still offers quite a few higher end features. Three PCIe 3.0 16x slots that support Crossfire and SLI along with a pair of both PCIe 2.0 1x and legacy PCI slots allow for a variety of configurations. The half dozen SATA 6Gbps ports are simply expected now but the addition of an M.2 port is a welcome enhancement. When [H]ard|OCP overclocked their 4790K in this board they could almost hit 4.8GHz but ended up with 4.7GHz as the best overclock which makes it perfect for the price conscious consumer. Read their full review of this Gold winning motherboard here.
"While ASUS is usually known for motherboards like the Maximus and Rampage Extreme series’ or even feature rich solutions like the Z97-Deluxe it is motherboards like the Z97-A that are ASUS’ bread and butter. Shopping for an inexpensive motherboard doesn’t have to mean accepting poor quality feature stripped solutions."
Here are some more Motherboard articles from around the web:
- ASUS Z97-Deluxe & Z97-A Review @ OCC
- Biostar Hi-Fi Z97WE @ Kitguru
- ASUS Z97I-PLUS ITX Motherboard Review @ Hardware Canucks
- Gigabyte Z97X Gaming G1 Motherboard Review @ Hardware Asylum
- MSI Z97 XPOWER AC - Extreme Overclocking for the new Haswell @ Bjorn3d
- MSI Z97 Gaming 9 AC – MSI’s top tier gaming offering @ Bjorn3d
- Gigabyte GA-Z97X-Gaming 3 @ X-bit Labs
- MSI Z97 MPOWER @ X-bit Labs
- MSI Z97 XPower AC @ [H]ard|OCP
Subject: Motherboards | August 7, 2014 - 02:14 PM | Jeremy Hellstrom
Tagged: SupremeFX 2014, LANGuard, KeyBot, GameFirst III, FM2+, crossblade ranger, ASUS ROG, asus, amd
ASUS Republic of Gamers have just released their first FM2+ board, the Crossblade Ranger which should be available for ~$160 in the next few days, a perfect base for the A10-7800 and A6-7400K which Josh just reviewed. There is a host of features on this board, from an updated SupremeFX 2014 audio system to eliminate interference and adjust impedance to the LANGuard and GameFirst III networking enhancements. KeyBot is also new, it allows you to program macros on any USB keyboard regardless of the capabilities of the keyboard itself. Check out the full release for a breakdown of the features.
Fremont, CA (6th August, 2014) - ASUS Republic of Gamers (ROG) today announced the Crossblade Ranger, the first AMD FM2+ motherboard to carry the revered ROG brand name, packed with game-boosting features for an AMD-based gaming powerhouse that is beyond compare. The Crossblade Ranger’s core benefits include the best gaming networking with Intel Gigabit Ethernet, the best gaming audio from SupremeFX 2014, the best gaming interface with KeyBot and the best gaming performance.
Best gaming networking
The Crossblade Ranger is fitted with state-of-the-art Intel Gigabit Ethernet that delivers better throughput and lower power consumption than competing solutions from other vendors.
The new motherboard’s networking capabilities additionally benefit from ROG-exclusive GameFirst III technology for optimal online gameplay. This advanced network-optimization software assigns top priority to game-data packets, allocating them more bandwidth to ensure the best online-gaming experience and clear, stutter-free online team-chat — all controlled with ROG’s usual intuitive flair.
These features are coupled with LANGuard Ethernet socket technology. LANGuard works by employing advanced filtering components with low impedance capacitors to reduce noise and improve throughput and also includes ESD and surge-protection to prevent damage from lightning strikes and static-electricity discharges.
Best gaming audio
Immersive audio is essential for gaming, so the Crossblade Ranger is engineered with SupremeFX 2014. At its core the SupremeFX 2014 solution uses PCB isolation techniques to minimize electromagnetic interference (EMI) and premium ELNA audio capacitors to provide precise 7.1 channel audio that’s on par with the best soundcards.
SupremeFX 2014 features dedicated hardware for features such as Sonic SenseAmp and Sonic SoundStage. Sonic SenseAmp automatically detects analog-audio front-panel (AAFP) headphone impedance and adjusts the amp gain to provide the best volume control range - taking the guesswork and hassle out of setting gain manually.
Sonic Soundstage is a hardware based solution that features preset audio profiles for a variety of gaming genres. First-person shooter (FPS), racing, combat and sports games presets are available via an onboard hardware switch or via the included (Windows) driver package. The benefit of including an onboard hardware switch is that the Sonic Soundstage presets can be applied without needing a driver – so works with any operating system. For Windows users, the presets are fully customizable via software, allowing one to tailor sound to personal preference.
SupremeFX 2014 also includes additional software features to provide a competitive gaming edge and improve immersion.
Designed for first-person shooters (FPS), Sonic Radar II displays a stealthy overlay that shows what opponents and teammates are up to. Players see the precise direction and origin of in-game sounds such as gunshots, footsteps and call-outs, enabling them to hone enemy-pinpointing skills.
Sonic Studio can be used to create virtual surround modes for stereo headsets, provides EQ controls to tune various parts of the audio spectrum and includes noise reduction algorithms for microphones – this all adds up to make SupremeFX 2014 the complete gaming audio solution.
Best gaming interface
The Crossblade Ranger includes KeyBot, a clever tool that lets users instantly ‘upgrade’ an existing keyboard simply by attaching it to the dedicated USB socket.
Once connected, the KeyBot microprocessor is activated and the user is able to use their current keyboard to control multimedia playback, launch favorite applications or assign macros to specific keys —perfect for automating complicated in-game key sequences without the need for an expensive gaming keyboard.
Best gaming performance and experience
Being an ROG motherboard, the Crossblade Ranger is infused with core ROG DNA.
ROG’s Auto-Tuning technology enables the Crossblade Ranger to unleash the true power of AMD APUs with just few mouse clicks. Thanks to the TPU microprocessor (Turbo Processing Unit), the Auto-Tuning routine applies a CPU overclock without need to enter UEFI - perfect for users that are new to the platform.
For users that prefer manual control, the TPU microprocessor and bundled Turbo-V application allows real-time voltage adjustments within the Windows operating system to simplify the process of overclocking a system. Naturally, the ROG UEFI is also chock-full of overclocking functions that help squeeze every ounce of performance from the AMD FM2+ platform.
To keep things cool and quiet, we’ve included five onboard fan headers – each with PWM (4-pin) or DC (3-pin) control. Extensive fan control options are available within UEFI or the automated Fan Xpert 3 calibration utility. Using either method, anyone can customize fan profiles in order to maximize cooling efficiency and eliminate unnecessary fan noise. The level of control on offer here sets a new standard for the FM2+ platform and completely negates the need for using a dedicated and expensive fan controller.
The Crossblade Ranger is also compatible with the ROG Front Base dual-bay gaming panel. The ROG Front Base enables one-click performance boosting, fan-controls, shielded front audio input/outputs, audio profile selection, volume control and real-time system monitoring to provide everything a gamer needs within a single unit.
AVAILABILITY & PRICING
The ASUS ROG Crossblade Ranger lands with an MSRP of $159.99 and will be available at all major online retailers in August.