Shopping for RAM for your SandyBridge system? Check this out.
Subject: Memory | March 31, 2011 - 09:18 PM | Jeremy Hellstrom
Overclockers Club assigned themselves the daunting task of testing five different sets of DDR3 of varying speed and not only tested them against each other on a Core i7 2600K, ASUS Maximus IV Extreme Memory and HD5870 system but then proceeded to test overclocking. Take a look at the final standings once the DIMMs cooled off a bit, as well as the specific features that differentiate them beyond their respective top speeds.
"Corsair's Vengeance series modules are rated for operation at 1600Mhz with latencies of 9-9-9-24 using a low 1.5v. At 1.5v I was unable to get them to scale up to the next memory multiplier which was 1866MHz. However, at the rated speed, the latencies could be tightened up to 7-8-7-27. To reach the next multiplier step I had to increase the voltage to 1.65 with a bump in the TECD from 9 to 10. Once at this step I increased the BCLK of the 2600K to go further with this set, topping out at 1962MHz DDR. That's a 362MHz or almost 23% bump from the base 1600MHz rated speed. A pretty stout bump in clock speed if you ask me."
Here are some more Memory articles from around the web:
- Crucial Ballistix Smart Tracer DDR3 PC3-12800 Memory Kit Review @ Madshrimps
- Crucial Ballistix Smart Tracer PC3-12800 Review @ OCIA
- Patriot G2 Series DDR3 1600MHz (2x2GB) Memory Kit Review @ Madshrimps
- Exceleram EP3001A 6GIG Kit Review @ XtremeComputing
- Patriot G2 PC3-12800 Review - XSReviews
- Kingston HyperX T1 Black 6GB Memory Review @ t-break