Corsair Announces New Modular Power Supplies
Subject: General Tech | July 21, 2011 - 01:02 PM | Tim Verry
Tagged: PSU, modular, corsair
Corsiar has recently introduced a new line of modular power supplies based on the popular TX V2 Enthusiast Series. The new modular PSUs have an attached ATX 12V cable and a full compliment of flat, detachable cables. Being 80+ Bronze certified, the new PSUs are able to deliver at least 85% efficiency at 50% load. Available from authorized retailers in July, the models range in wattage from 550 watts to 850 watts.
The Corsair TX550M is based on the TX550 V2 and is able to support the following connectors in addition to the non-modular ATX 12V cable.
|Wattage||550W @ 50°C|
On the voltage front, the PSU is capable of delivering 45A on the +12V rail and 25A on the +5V rail.
Read more about the new power supplies.
The TX650M represents a slight step up from the TX550M in that it delivers up to 54A on the +12V rail and 30A on the +5V rail. Further it is capable of supporting up to 150 watts combined on the +5V and +3.3V rails. The PSU supports the following connections.
|Wattage||650W @ 50°C|
The TX750M supports the same 30A on the +5V rail as the TX650M; however, it does bump up the available amperage on the +12V rail to 62A. 150W watts are available on the combined +5V and +3.3V rails. Further, this is the first PSU in the lineup that supports 4 PCI-E connectors.
|Wattage||750W @ 50°C|
Finally, the TX850M is the highest wattage modular power supply in the new lineup. It is also capable of 150W on the combined +3.3V and +5V rails as well as a respectable 840W on the +12V rail @ 70A. The PSU further features four PCI-E connectors and enough wattage to handle a power hungry SLI or CrossfireX setup. Specifically, it supports the following connectors:
|Wattage||850W @ 50°C|
You can see more photos of the new Corsair power supplies here.
Get notified when we go live!