All | Editorial | General Tech | Graphics Cards | Networking | Motherboards | Cases and Cooling | Processors | Chipsets | Memory | Displays | Systems | Storage | Mobile | Shows and Expos
Subject: Cases and Cooling | April 11, 2005 - 11:52 AM | Jeremy Hellstrom
Sooner or later we will all be using BTX cases, but the change is coming slow. Currently we have several of the innovations being touted for BTX being incorporated into our current ATX form factor, though we are still waiting to see if the "You got chocolate in my peanut butter" idea will work as good for tech as it did for snacks. In this Enermax case that PureOverclock reviews, a wind tunnel to isolate the CPU fan is the biggest innovation brought from BTX, although maybe not for DFI users. Read on to see w
Subject: Cases and Cooling | April 8, 2005 - 11:37 AM | Jeremy Hellstrom
Sorry guys, I've only manged to spot 2 Watercooling reviews, and no phase changed ones ... but hey, it's quality, not quantity, isn't it?
Danger Den's Maze 4 Waterblock was built with AMD in mind, and GideonTech takes a look. They had to put a little extra work into it, but the temperatures they got made it well worth it!
"To connect the Maze 4 block to the CPU socket using the 4 holes in the motherboard, the kit comes with an unusually large selection of threaded rods, nuts, thumb nuts, washer
Subject: Cases and Cooling | April 6, 2005 - 11:35 AM | Jeremy Hellstrom
If you are a hardcore overclocker who likes having to wear earplugs when sitting at your computer, then this isn't for you. If, on the other hand, you are looking for peace and tranquility, consider a fanless CPU Heatsink. XYZ examines the Thermaltake Fanless103. It isn't the coolest or the lightest, but you can't beat fanless if you want a silent running PC.
"If you are looking to quiet down your system there are a lot of options available.
Subject: Cases and Cooling | April 4, 2005 - 11:41 AM | Jeremy Hellstrom
With an 80mm in the front, a 120mm in the rear, and intake scoops that make it look turbo charged, the ASUS Vento is a unique looking case and PCStats has one to review. If it's a not the case you are looking for, then keep scrolling, because there is more.
"What used to be the solitary pastime of a few geeks with Dremels and too much free time is now a full scale modding industry, and even major computer retail chains are selling 'enthusiast' parts like.
Subject: Cases and Cooling | April 1, 2005 - 11:46 AM | Jeremy Hellstrom
Wanna buy a case that could give you a 1.2Ghz overclock? The new Asetek Vapochill X-treme Edition II did it for Extreme Overclocking, it may not be silent, but it sure is cool. If that's a little too much power for you, then keep scrolling down for some of the newest watercooling products.
"In the constant quest for better cooling, Asetek has released their VapoChill Extreme Edition II offering 180 watts of cooling at sub-zero temperatures.
Subject: Cases and Cooling | March 30, 2005 - 12:06 PM | Jeremy Hellstrom
Thermaltake just keeps the innovations coming, not only a new heatsink, but a new 'toolless' retention clip. Feast your eyes on the K450, brought to you by the folks at Techtastic. This cooler performs, but as with most targeted at the A64, it is huge, weighing in at 438g, and with a fan it's over 100mm tall. If you have a tight fit in your case right now, maybe you should think about cutting out a blower!
"Today we take a look at Thermaltake's K450 which is part of a new line of heat sinks developed by
Subject: Cases and Cooling | March 29, 2005 - 11:57 AM | Jeremy Hellstrom
Pimprig checks out Mutant Mods' stylish new acrylic case. You know they mean business when the case comes complete with gloves to use when you are installing your pieces. It is also a little smaller and thinner than most cases, so if you are looking at any of the larger CPU fans, then you may want to reconsider your cooling ...
Subject: Cases and Cooling | March 23, 2005 - 11:42 AM | Jeremy Hellstrom
So, just how important is the choice of fan nowadays? There used to be quite a bit of difference between the performance of fans, but now it seems that the size of the fan is your most important consideration. Mikhailtech compares 6 80 and 92mm fans, 2 Panaflo's and 4 Delta's. Go see who comes out on top.
"Make no mistake about it, this is the ultimate 92mm fan you can get. Rated at an astounding 126.48CFM, it also sounds like it.
Subject: Cases and Cooling | March 21, 2005 - 11:56 AM | Jeremy Hellstrom
There's been a nice spread of case reviews over the past week, from silent to stormy and from fancy to frugal. A True Review looks at one right in the middle, the XPER X-Armor ATX Case. A nice inexpensive box, with good 120mm powered cooling and a 420W PSU.
"With all the mid-range cases on the market, it's hard to find one that has great airflow. We all know 120mm fans are the way to go, but they're reserved for higher priced cases, right? Wrong!
Subject: Cases and Cooling | March 18, 2005 - 11:45 AM | Jeremy Hellstrom
Not too much is happening on the watercooling front. However, that doesn't mean the quality of the products is declining, as Legit Reviews can show you with their look at Corsair's new COOL. Have a great friday!
"With the majority of today's processors becoming hotter water cooling is something that is becoming more mainstream. Corsair has been doing watercooling for years with the Hydrocool 200 and has decided to bring out a new product called the COOL to replace their old unit.
Subject: Cases and Cooling | March 16, 2005 - 11:43 AM | Jeremy Hellstrom
Just because your heatsink is huge doesn't mean it has to look like a plain old copper square. Take the new Beetle from Thermaltake, as reviewed by Overclockers Cafe. This heatsink would look great in the middle of a fully lit, fully modded case ... especially if you went with a plush theme!
"When I first saw the new Thermaltake Beetle Cooler, I thought of beetles all right. Not the four winged type that eat roses but more of the 72' or 73' variety.
Subject: Cases and Cooling | March 14, 2005 - 11:38 AM | Jeremy Hellstrom
Thermalrock has a new case in the market, the Oceandome, and it is one that is worth checking out if you want good ventilation, while keeping the noise under control. R&B Mods takes you on a tour through the case, so make sure to pay them a visit today. They also noiticed that there is plenty of room for watercooling, if the 80mm fans aren't your style.
"We have heard about Thermaltake before, but today we will look at a case from Thermalrock which is a fairly new company on the market.
Subject: Cases and Cooling | March 11, 2005 - 11:39 AM | Jeremy Hellstrom
This Vapochill Micro from Asetek may look like it's more of an aircooling solution, but it may well be something that can be incorporated into a full water system, once it is readily available. Pop on over to bit-tech, and see what you think!
"We have the first pictures on an in-action VapoChill Micro unit from Asetek.
Subject: Cases and Cooling | March 9, 2005 - 11:33 AM | Jeremy Hellstrom
Over in our tech talk forum, a common topic is how to go about removing leftover thermal goop from a heatsink. Arctic Silver is a common brand to use, and they now have their own cleaning solution. Mikhailtech reviews it, and you should read it if you are wondering just how to remove that old paste from your heatsink.
"Given the minor time investment in cleaning the heatsink, I was pleasantly surprised by ArctiClean's ability to get rid of the leftover compound.
Subject: Cases and Cooling | March 7, 2005 - 11:42 AM | Jeremy Hellstrom
Thermaltake has a nice looking case, called the Soprano. Not only does it look good, but the incorportation of 120mm fans and toolless assembly really make this one shine. Read all about it at Big Bruin.
"For those looking for a case to pay tribute to their favorite HBO show... "fuhget about it"! But... The Thermaltake Soprano is easily at the top of its class for looks. I would certainly not have any problem having this case sit in the family room, office, or professional studio.
Subject: Cases and Cooling | March 2, 2005 - 12:05 PM | Jeremy Hellstrom
X-bit looks at the best heatsinks out there, and makes a call for best of the bunch from a few different criteria. Systemcooling put together the coolest PC equipment that came out of 2004, in their eyes. There are more below, from quietingthe fiercest PC to cooling your OC'd videocard!
Nowadays computer users pay attention not only to performance of their PCs, but also to such characteristic as external design, high stability and silence.
Subject: Cases and Cooling | February 28, 2005 - 12:01 PM | Jeremy Hellstrom
Check out the Thermaltake Armor Case at Overclocker Cafe. It incorporates so many different features into a unique looking case, you may toss out your old box for the upgrade ... make sure to pull out the motherboard first!
Subject: Cases and Cooling | February 25, 2005 - 11:32 AM | Jeremy Hellstrom
Why just get a plain-jane waterblock when you can have one with customizable nozzles. That's the question Danger Den asked when they made the RBX, and OCMODSHOP got a chance to see how it performs. If you are leaning more towards picking up a new radiator, keep reading, we got you covered.
"The accelerator nozzles on the RBX are a very interesting concept. They allow the end user to adjust the water flow through the block to best suit the rest of the cooling system.
Subject: Cases and Cooling | February 23, 2005 - 12:07 PM | Jeremy Hellstrom
Arctic Cooling is keeping up the quality you would expect from them, with their Freezer 4, follow the link to MODTHEBOX and find out more. If your CPU is already in a comfortable temperature range, consider treating your video card to new thermal paste and heatsink, or just extend the life of your hard drives by actively cooling them.
"The second stage of cooling added into the Freezer 4 is the inclusion of four copper heat pipes that are interconnected to a solid copper base.