Is there still a market for DIY watercooling kits? The Thermaltake Pacific RL240 surfaces

Subject: Cases and Cooling | April 11, 2016 - 02:40 PM |
Tagged: Pacific RL24, thermaltake, watercooler

As you can see from the image, the Thermaltake Pacific RL240 Water Cooling Kit comes with some assembly required, it is not an AiO cooler.  Since it is a full kit it will cost you much more than a self contained cooling apparatus, at $284 on both Amazon and Newegg many users will not be interested in installing this cooler.  For those that are still curious, one of the benefits of the kit is that it contains everything you need, including the waterblock, reservoir and pump as well as the radiator and even coolant.  Unfortunately [H]ard|OCP's testing revealed the performance to be moderate at best, so the price premium is hard to justify, as you can see in the full review.

14592614496ql0VvS60C_1_1.jpg

"In a world now filled with All-In-One CPU coolers, Thermaltake takes it old school with a water cooling kit that has everything you need from A to Z. If cutting your hose to length and perfecting the layout and presentation of your cooling loop appeals to you, Thermaltake makes it easy with a one stop shop."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: [H]ard|OCP

Lian Li Debuts SFX-L PE-550 and PE-750 SFF Power Supplies

Subject: Cases and Cooling | April 8, 2016 - 07:23 PM |
Tagged: small form factor, SFX-L, SFX, PSU, power supply, Lian Li

Lian Li has (rather unexpectedly) announced a pair of SFX-L power supplies, with the PE-550 and PE-750 small form-factor PSUs.

pe750-02.jpg

Lian Li PE-750 SFX-L power supply

SFX-L is the slightly longer (hence the "L") version of SFX, and permits more powerful designs and larger, quieter fans than standard SFX. Of the two new models from Lian Li the PE-550 is an 80 Plus Gold PSU rated at 550W, and the PE-750 is an 80 Plus Platinum model boasting a whopping 750W from this tiny form-factor.

Lian Li has doubtless contracted the manufacture of these PSUs, as the post on SFF Network has concluded: "The 550W at least is from Enhance according to the UL number and the possibly the 750W based on the heatsink design."

pe550.jpg

Lian Li PE-550 SFX-L power supply

The 750W model now bests SilverStone in the SFX power category, eclipsing their 700W SFX-L model shown at CES this year (and which is still not listed on their site). Just why anyone would need 750W for what would presumably be a mini-ITX system (limited as mITX motherboards are, with only one PCI Express x16 slot); but the benefits of SFX are certainly appreciated the moment one begins working inside of an enclosure such as the NCASE M1.

pe750-08.jpg

The PSUs are fully modular with flat, ribbon style cables (PE-750 pictured)

Particulars as the pricing/availability were not yet known at press time. For full specs check out the links for Lian Li's product pages for the PE-550 and PE-750.

Source: SFF Network

Corsair's Angular Carbide SPEC-ALPHA Enclosure Released

Subject: Cases and Cooling | April 8, 2016 - 03:09 PM |
Tagged: mid-tower, enclosure, corsair, case, Carbide SPEC-ALPHA, atx case

Corsair has officially released the Carbide SPEC-ALPHA case they were showing off at CES 2016, and this mid-tower is a striking design that offers an alternative to more traditional look of the company's recent Carbide offerings.

DSC_0157.jpg

The White/Red SPEC-ALPHA at CES

"With its modern, angular appearance, the SPEC-ALPHA really stands out in a crowd. But its looks aren’t all that are modern – the SPEC-ALPHA features native USB 3.0 support, room for up to four SSDs, and a three-speed fan controller for the three included 120mm fans. A large window shows off internal components and the Direct Airflow Path layout, which provides superior cooling by getting rid of unnecessary drive bays."

The inclusion of a 3-speed fan control is definately welcome at this price, which is an attractive $79.99 MSRP. We'll have to wait until we get one in to test to see how it performs, but at first glance it looks promising. Doubtless the look won't be for everyone, but if you look at a lot of enclosures (like someone I know) unusual designs are always welcome!

DSC_0160.jpg

Inside the Black/Red version

Technical specifications from Corsair:

  • Expansion Slots: 7
  • 5.25” Drive bays: N/A
  • 3.5” Hard Drive Bays: 3
  • 2.5” Drive Bays: 4
  • Cooling Layout:
    • Front: 2 x 120mm (2 x 120mm LED included)
    • Top: 2 x 120mm
    • Rear: 1 x 120mm (included)
    • Radiator Compatibility:
      • 240mm: Front only
      • 120mm: Front, or Rear
  • Integrated dust filters for front and bottom intakes
  • Front I/O Panel includes:
    • USB 3.0 port (x2)
    • Three-Speed Fan Controller
    • Headphone and Microphone jacks
    • Power on and Reset buttons
  • Dimensions (LxWxH) 518 x 220 x 474 mm (20.39 x 8.66 x 18.66 inches)
    • Maximum GPU Length: 380 mm
    • Maximum CPU Cooler Height: 156 mm
    • Maximum PSU Length: 190 mm
  • 2 Year Warranty

Spec-Alpha_RED_21.png

(Image credit: Corsair)

As stated above the Carbide SPEC-ALPHA retails for $79.99 and is available now.

Source: Corsair

Other PSU companies hate them; Corsair's one weird trick to get you from a 7 to a 10

Subject: Cases and Cooling | April 8, 2016 - 02:12 PM |
Tagged: Warranty, PSU, corsair

If you are using a Corsair AXi, HXi, RMi Series or RMx Series PSU they have some great news for you today.  The 7 year warranty that you used to have has now been increased to a full decade of protection against product defects the in materials or workmanship.  It still won't help you if a snake decides to make a home in your PSU but for any failures caused because of design problems will be covered.  You can see the full details of the warranty over at Corsair's site.

unnamed.jpg

You can read the full PR here.

Source: Corsair

The DQ550ST 550W PSU, is it the greatest PSU of DEEPCOOL?

Subject: Cases and Cooling | April 4, 2016 - 06:14 PM |
Tagged: DQ550ST, Deepcool, 550W

The Deepcool DQ550ST 550W PSU is not even slightly modular, however it does ship with flat cables to make cable management much more effective for you.  This also helps with the pricing, you should be able to find the unit for ~$50 which beats out the competition.  This was [H]ard|OCP's first Deepcool PSU but that didn't deter them from strapping it into their torture chamber for some serious testing.  The PSU passed all of their tests and showed itself to be a well build PSU which would be a good basis for a mid-range system.  It did not come off with a reward, something to blame the marketers on as when you advertise a product as "one of the greatest PSU of DEEPCOOL" you raise expectations to a level beyond a mere pass.  Check out the full review if you are in the market for a ~500W PSU that will give you good value for your money, even if it is not quite the greatest.

1457918119q6lkn36JCc_3_1_l.jpg

"DEEPCOOL is not the first brand that comes to mind when you think about PSUs. But when a company gives you a feature set like this, "120mm FDB Bearing PWM fan with specially designed fan-blade, enjoys higher wind-pressure, super silent and excellent performance," we have to take a look. I loves me some wind-pressure."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: [H]ard|OCP

The Silent Base 800 may Be Quiet!, but the orange trim certainly isn't

Subject: Cases and Cooling | March 31, 2016 - 05:16 PM |
Tagged: be quiet!, Silent Base 800

Lee reviewed the Be Quiet! Silent Base 800 back on my birthday but since that feels like so long ago and since there are so many cases on the market it seems worth revisiting.  As this is the first time [H]ard|OCP has reviewed a case from this manufacturer, they are looking at it with fresh eyes instead of comparing it to the 600 model.  At 495x266x542mm (19.5x10.5x21.3") it is large enough to fit just about any component you might want and with seven slots it is great for multiple GPUs. [H] was impressed enough to grant a Gold Award to the 800, not just for the acoustical and thermal performance but also for the flexibility of the drive cages.  If you gave the case a pass previously, perhaps ponder a peek.

1458682777FhVrHeeInd_1_3.jpg

"With a company name like be quiet!, you likely know what to somewhat expect. This German company strives to build some of the best designed computer chassis on the market. Its new Silent Base 800 series case certainly looks good on the outside. How does it perform when it comes to being cool and quiet?"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: [H]ard|OCP

EKWB Unveils Nickel Plated Monarch Ram Heatspreaders To Water Cool Your Memory

Subject: Cases and Cooling | March 30, 2016 - 09:40 PM |
Tagged: water cooling, overclocking, liquid cooling, EKWB

The guys over at the Tech Report spotted a rather shiny product coming out soon from EKWB. The company is adding a nickel plated memory heat-spreader kit can be used to replace your existing heatspreaders and hook into a RAM waterblock like EKWB's own Monarch X2 to allow you to liquid cool your memory and add it to your custom cooling loop.

EK-RAM-Monarch-Module_NI_fit_1600.jpg

These new modules are similar to the existing black modules, but have a nickel plated finish that is particularly shiny (see the photo below). Each kit includes the parts to replace the heatspreaders on two memory modules. Thermal pads are used to facilitate heat transfer from the memory chips to the CNC'ed aluminum heatsinks.

Users can then screw a memory waterblock (EKWB specifies the Monarch X2 Acetel/Nickel) to the top of the replaced memory heat-spreaders. Heat is then transferred from the heatsinks to the block and finally to the water loop.

EK-RAM-Monarch-Module_NI_fill_1600.jpg

The new Monarch modules are available now for $34.99. The Monarch X2 waterblock adapter is a further $38.99 if you want to water cool the DRAM. Note that the existing black anodized heatsinks are a bit cheaper at $29.99.

The heatsinks certainly look nice, and while I can see reasons to liquid cool them for aesthetics or to play around with extreme overclocking water cooling your memory using them will get expensive in short order considering you need to buy both kits for every two memory DIMMs (I hope you don't have X99 with all slots populated heh).

If you really want to cool all the things and add a bit of 'bling' to your system look no further!

Source: EKWB

NZXT Kraken X31; midget beastie or large squid?

Subject: Cases and Cooling | March 21, 2016 - 04:05 PM |
Tagged: nzxt, Kraken X31, AIO

The NZXT Kraken X31 is smaller than its cousins, the radiator is a compact 120x30x155mm and uses a 120mm fan to move heat.  NXZT seems to offer proprietary controller software, called Cam software, but once you read the difficulties [H]ard|OCP had obtaining and using the software you will see why they recommend sticking with SpeedFan.  The performance is not quite as effective as most 140mm or 280mm coolers but on the other hand it operates at a significantly lower volume, 40.9dBA at most.   If you are looking for a decent performing and quiet cooler then check out the full review.

1457973682bdninKd8ha_2_9_l.jpg

"NZXT is also moving some of its AIO cooler strategy into the realm of making it smaller and more efficient. The Kraken X31 ticks that checkbox plus a few others, such as software control, variable pump speed, 16 inch tubing leads, and a six year warranty. (Place your own "Release the Kraken," joke here.)"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Arctic Cooling doubles up with the Liquid Freezer 240

Subject: Cases and Cooling | March 11, 2016 - 03:36 PM |
Tagged: arctic cooling, Liquid Freezer 240, AIO

Arctic Cooling has expanded their AIO CPU cooler lineup with the Liquid Freezer 240, which will fit on any modern AMD or Intel CPU.  As with the smaller Liquid Freezer 120 the CPU mounting bracket locks into place, making the install a breeze.  When [H]ard|OCP strapped it onto a CPU overclocked to 4.4GHz they were quite pleased to see this cooler take top spot, 69.7C under full load.  It was rather quiet as well, 41.7dBA is very acceptable for such a powerful cooler.  Pricing is equally impressive, $100 for the best AIO cooler they have tested.  No wonder it picked up a Gold Award.

1454419493xhAIVV5ZcK_1_1.jpg

"Arctic Cooling claims its new Liquid Freezer 240 is "Extremely Powerful yet Quiet," "Designed for Extreme Cooling Performance" and that it has "Optimal Heat Dissipation." This All-In-One CPU cooler has a 240mm radiator that is poised to do great things with a stock Push/Pull 4-fan configuration and excellent cold plate."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Rosewill is breaking away from their previous reputation as a bare bones PSU supplier

Subject: Cases and Cooling | March 9, 2016 - 01:40 PM |
Tagged: rosewill, Quark-550, modular psu, 550W

Rosewill have grown from providing what were inexpensive PSUs with little to no extra features into something much more interesting for those who do not need a 1000W PSU.  The new Quark-550 that [H]ard|OCP recently tested is a good example, it is fully modular, it has a single 12v rail with a capacity of up to 45A and internal components from both Nippon Chemi-con and Rubycon.  Once strapped to their torture bench, [H]ard|OCP saw decent results, in line with the competition for stability and efficiency but as the unit retails for $100, roughly $20 higher than other comparable units it did not receive an award.  If you find it on sale it is still a good choice for a mid-range build.

1456000642Y7PTQ3nbgt_3_8_l.jpg

"Rosewill was a Newegg "house brand" that has broken out to other retailers and you might have seen its name on all types of products. Today we are seeing what Rosewill accomplishes when it brands a 550 watt "Platinum" PSU. The 550W PSU market is crammed with competition...good competition at good prices."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Corsair Releases SF450 and SF600 SFX Power Supplies

Subject: Cases and Cooling | March 8, 2016 - 11:06 AM |
Tagged: small form-factor, SFX, SFF, SF600, SF450, PSU, power supply, corsair

Corsair has released their first SFX form-factor power supplies today, with the SF450 and SF600. Both are fully modular designs, and offer high-quality components as well as an 80 Plus Gold certification.

SF600_01.jpg

The Corsair SF600 SFX power supply

The power output for these PSUs are indicated by the naming, with the SF450 outputting up to 450W, and the SF600 up to 600W. These power supplies both feature "Zero RPM Fan Mode", which allows them to run without the fan during less strenuous loads, and all capacitors are Japanese made, and rated for up to 105 °C operation.

Here are the specifications and features from Corsair:

  • SFX Form Factor: Designed for high performance small form factor systems.
  • 80 PLUS Gold certified: High-efficiency operation for less excess heat and lower operating costs.
  • Fully modular cable set: Detachable DC cables make builds and upgrades easy, with clean, great-looking results.
  • 100% All Japanese 105°C capacitors: Premium internal components ensure solid power delivery and long term reliability.
  • Zero RPM Fan Mode: Virtually silent operation at low and medium loads.
  • Seven year warranty: Your guarantee of reliable operation that will last across multiple system builds.
  • MSRP: SF600 $119.99, SF450 $89.99

SF600_04.jpg

The SF600 pictured with its flat, ribbon style cables

Pricing is listed at $89.99 for the 450W version, and $119.99 for the 600W version. As to availability, the companty states that the SF450 and SF600 are "available immediately worldwide from Corsair’s worldwide network of authorized retailers and distributors".

Source: Corsair

If you like a spartan interior then check out Corsair's Carbide 600C

Subject: Cases and Cooling | February 19, 2016 - 02:11 PM |
Tagged: inverted motherboard, enclosure, corsair, Carbide 600C

A few weeks ago Sebastian published a review of Corsair's Carbide Series 600Q and today you can take a peek at its brother, the Carbide 600C.  The 600C differs in that it lacks the full noise shielding foam and has a hinged, latching side-panel, with a large window to show off your components.  It is 454x260x535mm (17.9x10.2x21") and so can handle even an eATX motherboard.  The inclusion of two 5.25" bays will please some but the sparse number of 3.5" bays is not likely to impress anyone who uses multiple drives.  There are many pluses for those who like a clean interior and the three fans and fan controller which come with the case is a nice touch.  Read more over at techPowerUp.

casenew2.jpg

"The Corsair Carbide 600C comes with an inverted motherboard layout and aims to offer a perfect mix for those looking to take advantage of such an interior with a wide body, plenty of liquid-cooling compatibility, a 3-stage fan controller, and great cable management."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: techPowerUp

Lian Li's PC-7N, retro case design with modern features

Subject: Cases and Cooling | February 17, 2016 - 04:03 PM |
Tagged: PC-7N, Lian Li, atx

7n-main.jpg

The new Lian Li PC-7N will appeal to those who prefer a case exterior with a simple clean design and modern conveniences inside.   The case has four tool-less drive trays for 3.5: or 2.5" drives as well as a pair of tool-less 5.25" trays, which some of us still like to have.  The case is 210x473x500mm (8.3x18.6x19.7") and can support CPU heatsinks up to 170mm as well as GPUs of up to 370mm (14.6") if you do not populate all the drive bays, 250mm (9.8") if you do.

7n-00.png

It can support a pair of 120mm fans in the front and a single one in the rear, or a radiator of 120x240x60mm in the front if you prefer watercooling.  The power and reset buttons are located on the top of the case, next to a pair of USB 3.0 ports and audio jacks which are protected by a hinged cover to help keep gunge out of your ports. You will be able to pick it up by the end of this month for around $100

7n-011.jpg

The full PR is below.

Source: Lian Li

Just another ATX on the wall

Subject: Cases and Cooling | February 12, 2016 - 03:06 PM |
Tagged: thermaltake, Core P5 Wall-Mounted ATX Chassis

Thermaltake have come up with a unique take on an enclosure, the Core P5 Wall-Mounted ATX chassis.  It is a case designed to be mounted on a wall and to show off all of your components thanks to a clear acrylic front panel.  You can see there is quite a bit of space for components inside which can present a challenge if you are trying for a particular aesthetic but with some creativity you should be able to fill it attractively.  It is an open air design which you should consider when deciding where to mount the case and it also offers benefits when you consider cooling.  Check out the full review over at [H]ard|OCP.

1454524108657ceGtcd2_5_12_l.jpg

"The main element that Thermaltake wants you to be able to accomplish with it new Core P5 Chassis, is for you to be able to show off your awesome PC system configuration that you have spent weeks working on so that it is near-perfect. While the P5 checks off more feature boxes than that, it surely does a good job of showing off your rig."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Meet Cerberus: Crowdfunded Micro-ATX Case Made in USA

Subject: Cases and Cooling | February 12, 2016 - 07:00 AM |
Tagged: small form-factor, SFF, NCASE M1, Kimera Industries, enclosure, crowdfunding, Cerberus, case

Micro-ATX offers a compelling option for smaller system builds without the limitations inherent with the mini-ITX form-factor, and a new company aims to offer one of the smallest micro-ATX enclosures possible while still supporting full-size components. That company is Kimera Industries, a newcomer (founded in 2014) that will be turning to Indiegogo to fund the Cerberus mATX enclosure, to be built right here in the United States.

IMG_3655croppedbw.jpg

Known previously as Project Nova, the Cerberus is reminiscent of the NCASE M1, a crowdfunded mini-ITX design that is ridiculously small even for mITX. In addition to supporting the larger mATX form-factor motherboard, the Cerberus is constructed from steel (rather than the M1's aluminum), and boasts an extremely compact size for an enclosure that can easily house a dual-GPU gaming setup.

“At just 18.2L, Cerberus is smaller than nearly all mATX (and many mITX) cases in industry today, yet supports flagship graphics and high-end PC components, making it a potent enclosure for hardware enthusiasts that want a compact and portable computer without compromises on performance.”

Cerberus-00-black-panels-off.jpg

A look at the interior with a complete system installed shows just how much can be crammed into this small space, just as with the NCASE M1. The inclusion of a hinged bracket for a liquid cooler (or other components) is a nice touch that should aid in system building with the Cerberus.

So, just how small is the Cerberus? A look at the full specs (available here) reveals dimensions of 320 mm height, 170 mm width, and 364 mm depth (12.60 x 6.69 x 14.33 inches). The enlosure, made from 20 gauge steel internally with 18 gauge steel panels on the outside, weighs in at 11.68 lbs.

Here’s a list of the features of the Cerberus enclosure from Kimera:

  • Size: At just 18.2L, Cerberus is smaller than some of the most popular mITX cases on the market, from Fractal Design’s Node 304, or BitFenix’s Prodigy. When compared to most mATX cases, Cerberus typically bests the competition by 10L or more - a whopping 40%+ volume reduction.
  • Quality: Made entirely of powder coated steel, and assembled in the United States, Cerberus is built to last for the long haul, with thoughtful features such as user-replaceable parts, durable metal hardware, and all-steel panel clips and pins.
  • Design: Cerberus embraces a minimalist, refined aesthetic, with a luxurious matte finish and industrial design that embraces clean edges and understated features over bright lights and garish plastic accents.
  • Customizability: With multiple colors on offer, additional colors available as stretch goals, and the option to add an optional metal handle and/or plexiglass window, Cerberus is engineered to be customized to enthusiasts’ exact preferences.
  • Flexibility: From SFX and ATX PSU support, to the hinged side bracket, to the innovative Infinite Vent system, Cerberus retains some of the most diverse hardware support in industry, and can comfortably contain systems as simple as HTPCs and as sophisticated as water-cooled, multi-GPU gaming powerhouses.
  • Craftsmanship: Through a unique partnership with Sliger Designs, every Cerberus is built by trained and talented engineers on Sliger’s production floor, located in Sparks, Nevada, USA. By manufacturing enclosures domestically, instead of through nondescript factories in China or Taiwan, Kimera Industries is able to maintain strict quality controls, communicate constantly with engineers on the floor, and greatly expedite production and shipment of units to backers - all while supporting local workers, businesses, and communities.

Cerberus-00-white-3.jpg

The Cerberus is also available in white, shown with optional handle

The Indiegogo campaign launches March 1st, and additional information can be found at the Kimera Industries site.

Lian Li PC-M25: mATX Enclosure with 5 Hot-Swap HDD Bays

Subject: Cases and Cooling | February 9, 2016 - 01:33 PM |
Tagged: small form-factor, SFF, PC-M25, micro tower, mATX, Lian Li, hot-swap, enclosure, case, aluminum case

The PC-M25 is Lian Li’s latest enclosure; a small micro-ATX tower with an emphasis on storage.

m25-000.jpg

“The PC-M25 includes a hot-swap HDD rack where users can conveniently install and remove up to five 3.5” drives with rubber suspension and without needing tools. The bottom HDD tray can mount an additional three 2.5” or two 3.5” drives. This makes a total of as many as seven 3.5” hard drives for advanced RAID storage applications.”

While a small form-factor design (all aluminum, of course), there is still room for a full system including long graphics cards and power supplies; though you’ll want a lower-profile CPU cooler as there is only 80 mm of clearance above the processor. Fans are included, with 140 mm intake and 120 mm exhaust pre-installed, though there is only a screen filter on the bottom intake (below the PSU).

m25-009.jpg

Specifications:

  • Model: PC-M25 A/ B
  • Case Type: Mini Tower Chassis
  • Color: Silver, Black
  • Material: Aluminum
  • M/B Type: Micro-ATX, Mini-ITX
  • Expansion Slot: 4
  • Storage:
  • HDD rack: 3.5" HDD x5 (Hot-swap)
  • HDD tray: 2.5" HDD x3 or 3.5" HDD x2
  • System Fan (Front) 140mm Fan x1; System Fan (Top) 120mm Fan x1
  • I/O Ports: None
  • Maximum Compatibility
  • VGA Card length: 410mm
  • PSU length: 230mm 
  • CPU cooler height:80mm
  • PSU Type: ATX
  • Dimensions (W x H x D) 199 x 322 x 441 mm (7.83 x 12.68 x 17.36 in)
  • Net Weight: 3.74 kg (8.25 lbs)

storage_options.jpg

Storage options for the PC-M25

The PC-M25 will be available this month with an MSRP of $169.

Source: Lian Li

Phanteks Announces Eclipse Series P400, P400S Enclosures

Subject: Cases and Cooling | February 9, 2016 - 09:06 AM |
Tagged: RGB, phanteks, mid-tower, enclosure, Eclipse Series, Eclipse P400S, Eclipse P400, case

Phanteks has announced a new enclosure series called ‘Eclipse’, which take the internal layout of the Enthoo lineup and packages it in a pair of affordable new enclosures; the P400 and P400S.

P400S-1z.jpg

“Without much effort, the P400 allows users to create a clean and beautiful system. Ambient RGB illumination adds character while the solid metal exterior gives the case a simple elegant design. The P400 is suitable for beginners and experienced system builders with all the extra features; the P400S comes with sound damping panels and a 3-speed fan controller to enhance acoustical performance.”

The internal layout of these enclosures will be familiar to you if you’ve seen the Enthoo series, with an open main chamber, a bottom partition for the PSU and hard drives, and all storage accessible from behind the system. There are a couple of notable differences between the Eclipse P400 and P400S, primarily the latter’s noise-reducing insulation and the addition of a 3-speed fan controller.

P400S-9z.jpg

Exploded view of Eclipse P400S

Side panel windows are available, with added style from the ambient RGB lighting on both models. The P400 and P400S are available in black, white, or grey, and the body panels are metal, which should contribute to a more premium feel.

Specifications:

  • Form Factor: Mid-tower
  • Materials: Steel chassis, steel exterior, ABS
  • Motherboard Support: ATX, Micro ATX, Mini ITX, E-ATX (up to 272mm wide, cannot use rubber grommets)
  • Expansion Slots: 7
  • Storage:
    • Internal 3.5” bays: 6x (2x trays included)
    • Internal 2.5” bays (dedicated): 2x (2x included)
  • Cooling:
    • 120 mm fan: Front, 3x (1 included); Top, 2x; Rear, 1x (1 included)
    • 140 mm fan: Front, 2x; Top, 2x
  • Front I/O: 2x USB 3.0, Mic, Headphone, Reset, LED control, 3-speed Fan controller (only available for P400S)
  • Side Window: Yes (also available with closed panel)
  • Soundproofing panels: (only available for P400S) Front/Top/Sides
  • Dimensions (W x H x D): 210 x 465 x 470 mm (8.3 x 18.3 x 18.5 inches)

P400S-8z.jpg

No specific release date was announced, but full suggested pricing information is available:

  • Eclipse P400 (PH-EC416P) Black/Grey: $69.99 / White: $79.99
  • Eclipse P400S (PH-EC416PS) Black/Grey: $79.99 / White: $89.99
    • (P400S pricing identical for Silent Window and Silent Closed Panel versions)
Source: Phanteks

Swiftech's H320 X2, bigger, better and ready for your personal touches

Subject: Cases and Cooling | February 5, 2016 - 06:44 PM |
Tagged: swiftech, H320 X2, AIO, watercooling

The Swiftech H320 X2 is obviously designed for those who like to show off the insides of their system, parts of both the reservoir and waterblock are clear as is the piping and there are indeed LEDs on the cooler.  It is larger than the previous generation, the radiator is 127 x 375 x 28mm with a 109ml reservoir, three Swiftech Helix 120mm PWM fans are installed to pull heat from the radiator.  Modders Inc loved the fact that while this is an AiO cooler, it is designed with modding in mind as you can add in or switch out components which is a rarity in AiO watercoolers.  The performance was also impressive, you can read about that and more in their full review.

DSC_7910.jpg

"All-in-one (AIO) water cooling units have brought the performance and silence of water cooling to the masses with the simplicity of installing an air cooler. AIOs offer simple installation without the need to bleed the loop. Simply attach the hardware and power cables and you are all set."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: Modders Inc

The Wraith in action

Subject: Cases and Cooling | February 2, 2016 - 03:26 PM |
Tagged: Wraith, fx 8370, amd

By now you should have memorized Josh's look at AMD's new processors and FM2+ motherboards, unfortunately the one thing we were missing was time to test the unit (which totally did arrive, sorry!)TechGage on the other hand did receive an FX 8370 Wraith and had a chance to do some quick tests with this new 95W cooler.  There was a slight hitch, the motherboard they used ran the fan at the full 3,000RPM so more audio tests do need to be run however the thermals show great potential as the FX 8370 never surpassed 57C.  This indicates with a properly controlled fan header you should be able to reduce the speed and noise generated without seeing troublesome CPU temperatures.

AMD-Wraith-CPU-Cooler-Fan.jpg

"It’s not often that we’re treated to a CPU cooler update from AMD, so it was with great interest that we checked out its Wraith in action at last month’s CES. We’ve now been able to poke and prod the cooler over the past week in our lab, and cover everything important about it here. For good measure, we also tackle platform updates."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: Techgage

EVGA Winter 2016 Prize Pack and Giveaway!!

Subject: General Tech, Graphics Cards, Motherboards, Cases and Cooling | February 2, 2016 - 02:07 PM |
Tagged: Z170, PSU, power supply, motherboard, GTX 970, giveaway, ftw, evga, contest

For many of you reading this, the temperature outside has fallen to its deepest levels, making it hard to even bare the thought of going outdoors. What would help out a PC enthusiast and gamer in this situation? Some new hardware, delivered straight to your door, to install and assist in warming up your room, that's what!

PC Perspective has partnered up with EVGA to offer up three amazing prizes for our fans. They include a 750 G2 power supply (obviously with a 750 watt rating), a Z170 FTW motherboard and a GTX 970 SSC Gaming ACX 2.0+ graphics card. The total prize value is over $650 based on MSRPs!

All you have to do to enter is follow the easy steps in the form below. 

We want to thank EVGA for its support of PC Perspective in this contest and over the years. Here's to a great 2016 for everyone!

EVGA Winter 2016 Giveaway!!