Computex 2015: Fractal Design Launches Mini ITX Node 202 Case

Subject: Cases and Cooling | June 4, 2015 - 11:06 PM |
Tagged: SFX PSU, SFF, node 202, mini ITX, HTPC case, fractal design, computex 2015, computex

Fractal is showing off several new products at Computex, but the one that caught my eye was the new Node 202 which is a small form factor Mini ITX case perfect for the living room. The thin case is all black with a metal texture finish, rounded corners, and diagonal ventilation grilles along the sides and top. The 10.2 liter capacity case measures 377mm x 88mm x 332mm (including case feet) and can accommodate SFX power supplies, Mini ITX motherboards, and a dedicated graphics card.

Fractal Design Node 202.jpg

The front of the case has two USB 3.0 ports and two audio jacks in the bottom left corner next to the power button. Large filtered vents are located on the right, top, and bottom of the case while the left side has a thin grill along the bottom. Needless to say, there is plenty of room for airflow and the case would do well with both air cooled and fanless systems. Users can mount the case horizontally or vertically using an included stand. Interestingly, the Node 202 divides the case into two separate chambers to isolate the graphics card from the CPU, motherboard, and power supply to facilitate cooling.

Internally, the Node 202 has room for a Mini ITX or Thin Mini ITX motherboard with CPU coolers up to 56mm tall, a 130mm SFX power supply, and a dual slot graphics card up to 310mm in length. Users can install up to two 120mm fans in the GPU chamber. Storage support tops out at two 2.5" hard drives or solid state drives (SSDs).

Fractal Design Node 202 Internals .jpg

Fractal Design is also offering a version of the Node 202 bundled with its Integra SFX 450W power supply. The 80+ Bronze power supply will come with custom length cables and connectors designed specifically for the Node 202. It is covered by a 3 year warranty.

The PSU-less Node 202 will have a MSRP of $79.99 while the Node 202 with bundled PSU will be $139.99. Both models will be available soon in the US.

Podcast #352 - GTX 980 Ti, News from Computex, AMD Fiji Leaks and more!

Subject: General Tech | June 4, 2015 - 06:22 PM |
Tagged: zotac, video, titan x, thunderbolt 3, SSD 750, podcast, ocz, nvidia, msi, micron, Intel, hbm, g-sync, Fiji, computex, amd, acer, 980 Ti

PC Perspective Podcast #352 - 06/04/2015

Join us this week as we discuss the GTX 980 Ti, News from Computex, AMD Fiji Leaks and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano

Program length: 2:02:45

  1. Week in Review:
  2. Computex, Dawg
  3. News item of interest:
  4. Closing/outro

Subscribe to the PC Perspective YouTube Channel for more videos, reviews and podcasts!!

Computex 2015: Synaptics Touches Up The Space Bar With SmartBar Technology

Subject: General Tech | June 3, 2015 - 12:00 PM |
Tagged: touch, synaptics, smartbar, opinion, gaming, computex 2015, computex

Synaptics revealed more details on its SmartBar technology today at Computex. The human interface company most known for its trackpads is looking to expand its reach into keyboards. Specifically, SmartBar is technology that will add touch input functionality to the keyboard spacebar. Using the technology, OEMs can integrate capacitive touch sensors into the spacebar allowing for several unique and productivity boosting gestures. 

Synaptics SmartBar Capacitive Spacebar.jpg

The SmartBar spacebar can be broken up into five logical (touch sensitive areas) buttons each of which can be associated with user created macros using a bundled macro editing utility. Alternatively, users can enable touch gestures. Synaptics is touting the ability to use quick left and right swipe motion to edit text by moving the cursor back and forth word by word though a document as well as the ability to use a two thumb pinch gesture to zoom in and out on an image or document. The touch input would also be useful to gamers who want to future increase their actions per minute in RTS games or even something as simple as shifting gears or switching weapons in racing and first person games respectively.

Along the lines of gaming, it turns out that Thermaltake under it's Tt eSports line will be the first adopter of this SmartBar technology, and while Synaptics did not reveal any exact products I am looking forward to see what Thermaltake does with the technology in its future gaming keyboards. This could be a gimmick, or it could really take off and be a must have feature depending on how well it is implemented in both hardware and software. It does make sense though; the spacebar is the natural resting place for your thumbs, so it should not take too much effort to incorporate touch gestures (literally at your fingertips...) to improve your game or work efficiency. A simple but promising idea for sure.

From the press release:

“Desktop PCs still represent a sizeable portion of the PC market, especially in the commercial segment, but most desktop users have been left behind in terms of next-generation interfaces such as touch,” said Tom Mainelli, VP of Devices & Displays at International Data Corporation (IDC). “Companies are always looking for ways to help drive employee efficiency, and feature-rich, touch-enabled keyboards represent a straightforward, affordable way to help increase worker productivity.”

The SmartBar technology is available now to OEMs, but we might have to wait until CES to see actual products offering touch sensitive spacebars.

What do you think of the technology, and would you use it for gaming?

Source: Synaptics

Computex 2015: Micron Announces 16nm TLC For Consumer SSDs

Subject: Storage, Shows and Expos | June 3, 2015 - 03:47 AM |
Tagged: tlc, ssd, micron, flash, computex 2015, computex, 16nm

Chugging right along that TechInsights Flash Roadmap we saw last year, Micron has announced the TLC extension to their 16nm flash memory process node.

Micron Roadmap.png

While 16nm TLC was initially promised Q4 of 2014, I believe Micron distracted themselves a little with their dabbles into Dynamic Write Acceleration technology. No doubt wanting to offer ever more cost effective SSDs to their portfolio, the new TLC 16nm flash will take up less die space for the same capacity, meaning more dies per 300mm wafer, ultimately translating to lower cost/GB of consumer SSDs.

micron_128gb_16nm_nand_flash.jpg

Micron's 16nm (MLC) flash

The Crucial MX200 and BX100 SSDs have already been undercutting the competition in cost/GB, so the possibility of even lower cost SSDs is a more than welcome idea - just so long as they can keep the reliability of these parts high enough. IMFT has a very solid track record in this regard, so I don't suspect any surprises in that regard.

Full press blast appears after the break.

Computex 2015: G.Skill Teases New Trident Z DDR4 Memory

Subject: Memory | June 3, 2015 - 03:33 AM |
Tagged: trident z, G.Skill, ddr4, computex 2015, computex

G.Skill is teasing a new series of DDR4 memory modules at Computex. Dubbed Trident Z, the new modules will come in both dual and quad channel packs aimed at high performance gaming PCs and are overclocking friendly. 

GSkill Trident Z DDR4 Quad Channel Memory Modules.png

The Trident Z series feature large stylized aluminum heatspreaders paired with a colored accent bar that users can swap out to the color of their choice to match the other PC components. G.Skill is holding off on revealing the nitty-gritty details on these modules leaving us to guess at the clockspeeds and CAS latencies. They sure look fast though!

If the existing Trident X series and the company's extreme overclocking prowess is anything to go by, however, the new Trident Z series will likely push past 3,400 MHz supported clockspeeds at the high end. That's only speculation though.

Luckily, we will not have to wait long to find out the speeds and feeds of this new memory series. Trident Z modules will be avilable next month for to-be-announced prices.

Source: G.Skill

Computex 2015: SilverStone Shows New Raven RVX01

Subject: Cases and Cooling | June 3, 2015 - 03:25 AM |
Tagged: Silverstone, Raven RVX01, computex 2015, computex

SilverStone has shown off a new Raven ATX enclosure at Computex, and the RVX01 offers a new take on this well-known enthusiast gaming enclosure.

RVX01_1.jpg

The RVX01 pictured at the show (Image credit: techPowerUp)

This new design features the same 90 degree motherboard orientation as the current RV05 (reviewed here) but has a slimmer profile at 7.68" wide (WxHxD listed as 195 mm x 473 mm x 470 mm), and this new version also has stylish red accents to offset the matte black panels.

Details are scarce, but from a look at the photos it appears that the GPU bracket from the original Raven is back, and the report also describes triple 120 mm fans along the bottom in place of the dual 180 mm fans from the current version.

RVX01_2.jpg

The RVX01 pictured from a slightly different angle (Image credit: techPowerUp)

We'll keep you posted when we have an official announcement for this newest Raven, and hopefully we'll have one in for review whenever it becomes available!

Source: techPowerUp

Computex 2015: OCZ Trion and Z-Drive 6000, 6300 SSDs Sighted

Subject: Storage, Shows and Expos | June 3, 2015 - 03:18 AM |
Tagged: Z-Drive 6300, Z-Drive 6000, Trion, ssd, pcie, OCZ Technology, ocz, NVMe, computex 2015, computex

OCZ is showing off some new goodies at Computex 2015 in the form of a completely new SSD model – the Trion:

Trion Pic.jpg

The Trion is based on an in-house Toshiba ‘Alishan’ controller – the first internal design from that company. Since it is sourced from within Toshiba, the new SSD controller is to be tuned for consumer workloads and should employ lower power states than prior OCZ / Indilinx SSD controllers, as well as Toshiba’s own proprietary QSBC (Quadruple Swing-By Code) error correction technology, which should squeeze a bit more usable life out of the A19nm TLC flash. This is what QSBC looks like compared to competing BCH and LDPC technologies:

QSBC.png

We suspect Toshiba dialed back the algorithm a bit for client usage, but it should still be far superior to BCH. We don’t have many more details as the Trion has not yet been officially launched, but we do have this shot of a round of benchmark results from a pre-production 960GB model:

Trion-2.JPG

From what we can see, it appears to be a good performer (by modern SATA 6Gb/sec SSD standards), but we naturally can't tell anything for sure until we get samples in for local testing, as we have no idea of the state of preconditioning of the Trion in those tests.

Also on display were the recently launched Z-Drive 6000 and 6300 Series parts:

ZDrive6000.jpg

ZDrive 6300 pic1.jpg

These are OCZ’s enterprise-grade NVMe devices, available in 800GB, 1.6TB, and 3.2TB. The 6000 series is a 2.5” 15mm SFF-8639 device aimed at lighter workloads with a rating of 1 Drive Write Per Day (DWPD) over a 5-year period, while the 6300 series brings that figure up to 3 DWPD and offers an HHHL PCIe card as an optional form factor. The higher writes per day are facilitated by the move to A19nm eMLC flash.

We’ll be keeping a close eye on these new developments from OCZ and we are eager to get these in the shop for some thorough testing!

Press blast for the Trion and Z-Drive 6300 Series after the break!

Computex 2015: Zotac Reveals Custom Cooled GTX TITAN X ArcticStorm Graphics Card

Subject: Graphics Cards | June 2, 2015 - 09:56 PM |
Tagged: zotac, water cooling, titan x, gtx titan x, computex 2015, computex, arcticstorm

NVIDIA’s AIB partners are out in full force at Computex 2015 with new graphics cards and new coolers. Among the fray is Zotac with a customized GTX TITAN X card using the ArcticStorm Hybrid cooler which is an air cooler that also features a water block and can be integrated into your custom water cooling loop.

Zotac GeForce GTX Titan X ArcticStorm Graphics Card.jpg

Of course, the TITAN X is NVIDIA’s top end Maxwell (GM200) graphics processor built on a 28nm process. It has 3,072 CUDA cores, 192 texture units, 96 ROPs, and a 250W TDP. 

Zotac is factory overclocking this GPU to 1026 MHz base and 1114 MHz boost. The 12GB of GDDR5 memory sits on a 384-bit bus and is also (slightly) factory overclocked at 7010 MHz.

The card itself has the same array of video outputs (three DisplayPort, one HDMI, and one DL-DVI) and the same PCI-E power connectors (6-pin + 8-pin) as the reference card.

The ArcticStorm Hybrid cooler can work as an air cooler or as an air + water cooler similar to ASUS’ Poseidon cards. The Zotac cooler features a copper cold plate paired with heatpipes and a large aluminum fin array cooled by three 90mm shrouded fans.

Zotac GeForce GTX Titan X ArcticStorm Graphics Card PCI-E Power.jpg

This cooler should run quieter than the NVIDIA reference card and, especially when connected to your custom liquid cooling loop, and offer lower temperatures. Zotac did not opt for two 8-pin PCI-E so extreme overclocking might be out of the question, but the card should still be heavily overclockable in general should you get a good chip.

Naturally, Zotac is holding off on pricing and availability details of the GTX TITAN X ArcticStorm (ZT-90402-10P) until it is ready to ship which should be soon. Stay tuned to PC Perspective for more details.

Source: Zotac

A substantial upgrade for Thunderbolt

Today at Computex, Intel took the wraps off of the latest iteration of Thunderbolt, a technology that I am guessing many of you thought was dead in the water. It turns out that's not the case, and this new set of features that Thunderbolt 3 offers may in fact push it over the crest and give it the momentum needed to become a useable and widespread standard.

First, Thunderbolt 3 starts with a new piece of silicon, code named Alpine Ridge. Not only does Alpine Ridge increase the available Thunderbolt bandwidth to 40 Gbps but it also adds a native USB 3.1 host controller on the chip itself. And, as mobile users will be glad to see, Intel is going to start utilizing the new USB Type-C (USB-C) connector as the standard port rather than mini DisplayPort.

tb3-1.jpg

This new connector type, that was already a favorite among PC Perspective staff because of its size and its reversibility, will now be the way connectivity and speed increases this generation with Thunderbolt. This slide does a good job of summarizing the key take away from the TB3 announcement: 40 Gbps, support for two 4K 60 Hz displays, 100 watt (bi-directional) charging capability, 15 watt device power and support for four protocols including Thunderbolt, DisplayPort, USB and PCI Express.

tb3-2.jpg

Protocol support is important and Thunderbolt 3 over USB-C will be able to connect directly to a DisplayPort monitor, to an external USB 3.1 storage drive, an old thumb drive or a new Thunderbolt 3 docking station. This is truly unrivaled flexibility from a single connector. The USB 3.1 controller is backward compatible as well: feel free to connect any USB device to it that you can adapt to the Type-C connection.

tb3-3.jpg

From a raw performance perspective Thunderbolt 3 offers a total of 40 Gbps of bi-directional bandwidth, twice that of Thunderbolt 2 and 4x what we get with USB 3.1. That offers users the ability to combine many different devices, multiple displays and network connections and have plenty of headroom.

tb3-4.jpg

With Thunderbolt 3 you get twice as much raw video bandwidth, two DP 1.2 streams, allowing you to run not just a single 4K display at 60 Hz but two of them, all over a single TB3 cable. If you want to connect a 5K display though, you will be limited to just one of them.

tb3-5.jpg

For mobile users, which I think is the area where Thunderbolt 3 will be the most effective, the addition of USB 3.1 allows for charging capability up to 100 watts. This is in addition to the 15 watts of power that Thunderbolt provides to devices directly - think external storage, small hubs/docks, etc.

Continue reading our preview of the new Thunderbolt 3 technology!!

Rivet Networks Announces Killer Wireless-AC 1535

Subject: Networking, Shows and Expos | June 2, 2015 - 04:00 PM |
Tagged: msi, killer nic, killer, computex 2015, computex, 802.11ac

Killer Networking has developed several networking solutions, focused on gamers, over the last decade or so. Ryan reviewed their first product way back in 2006, and he found it had some merit but struggled when quantifying it, especially to the price tag that it bore. Many years later, Qualcomm picked them up and their technology found a few design wins, especially with Gigabyte motherboards. They also branched out into wireless networking, a segment that undeniably could benefit from innovation. They are also, now, under the Rivet Networks brand, which is listed as an “Authorized Design Center” for Qualcomm.

rivet-networks-killer-ac-1535.jpg

Today, they are announcing the Killer Wireless-AC 1535 Networking Adapter. This brings their technology to the 802.11ac standard. It includes features like DoubleShow Pro, which allows Windows to balance network traffic between wireless and wired networks. It also allows the user to monitor their wireless traffic, even providing an interface to throttle or outright disable certain applications from using the internet. They are mostly promoting their “ExtremeRange” technology, which uses the MU-MIMO standard of 802.11ac, along with beamforming and two signal amplifiers, to provide high bandwidth at longer ranges.

The Killer Wireless-AC 1535 has received a few design wins, this time with MSI. It will be available in the MSI GT72 and MSI GT80 gaming laptops, as well as the MSI X99A GODLIKE GAMING motherboard. Thankfully, they are not adopting MSI's love of uppercase letters.