Xi3's SFF PISTON Gaming Console Now Available for Pre-Order

Subject: General Tech | March 27, 2013 - 12:06 AM |
Tagged: Xi3, valve, Steam Box, piston, pc gaming, gaming

It may or may not be Valve's Steam Box, but Xi3 is the closest thing to a small form factor PC gaming console running Steam on the radar so far. The Xi3 PISTON is now up for pre-order with an intended holiday 2013 launch.

The PISTON starts at $899 and increases in price from there depending on the amount of internal storage included. Basic specifications of the Piston include an AMD APU (likely the A10-4600M) clocked at 2.3GHz (3.2GHz turbo), Radeon 7660G processor graphics (384 shaders), 8GB of DDR3 RAM, and a 128GB solid state drive. For an extra $340, Xi3 will swap in a 256GB SSD, and for $750 the company will include a 512GB option. Of course, that would bring the price of the living room TV up to $1649, which is far from cheap.

Xi3 PISTON.jpg

For that kind of money you could build a much more powerful mid tower that could actually run Steam games at 1080p with all the details cranked up. The Xi3 box will be lucky to average 30FPS at 1080p with the latest games. With that said, it is a start and I hope to see continued development of these "Steam Box-esque PCs. Hopefully once mass production, competing options, and economies of scale kick in, consumers will be able to get their hands on cheaper Steam Boxes!

If you can't wait for the official Steam Box, however, you can head over to the Xi3 website to reserve your own PISTON.

Source: Xi3

Xi3 Launches Low-Power, Compact Z3RO Pro Computer

Subject: Systems | January 15, 2013 - 06:36 PM |
Tagged: z3ro pro, Xi3, SFF

Xi3 Corporation recently announced a new small form factor computer with the Xi3 Z3RO Pro. The new PC features a blue and silver chassis in typical Xi3 styling. It measures 1.9 x 4.9 x 3.6 inches, which is about the size of a small paperback book.

Inside the chassis, the Xi3 Z3RO Pro features a dual core processor clocked at 1.65GHz with 2MB L2 cache, a GPU with 80 shader cores, and 4GB of DDR3 memory. Further, Xi3 will include between 16GB and 1TB of internal storage. The system will reportedly operate on a mere 15W.

Xi3 X3RO Pro Computer.jpg

Rear IO on the Xi3 Z3RO Pro includes four combination eSATA/USB 3.0 ports, a single Gigabit Ethernet jack, and two video outputs. It has one combination HDMI and DisplayPort output and one mini DisplayPort port.

The low-power system is available for pre-order now. It will officially launch in the second quarter of 2013 for around $399. The Xi3 Z3RO Pro ships with OpenSUSE 11.2 Linux, but the X86-64 compatible hardware will support other desktop operating systems like Linux Mint and Windows 8. Unfortunately, Xi3 was vague on the processor being used, but an AMD APU of some sort is a good bet. 

Source: Xi3

CES 2013: Valve Talks Piston, Better Listen. Steam Box!

Subject: Editorial, General Tech, Systems, Shows and Expos | January 8, 2013 - 02:06 PM |
Tagged: Xi3, valve, trinity, Steam Box, ces 2013, CES, amd

Going from a failed Kickstarter to Valve’s premier console? Sounds like a good anecdote to tell.

Valve has finally discussed the Steam Box in more concrete details. Get ready for some analysis; there are a bunch of hidden stories to be told. We will tell them.

Update for clarity: As discussed in IRC technically this was an Xi3 announcement that Valve will have at their booth but not an official Valve announcement. That said, Valve will have it at their booth and Valve funded Xi3.

Another Update for new information: Turns out this is not the Valve-official device. Ben Krasnow, Valve hardware engineer, made a statement that the official Steam Box is not planned to be announced in 2013. What we will see this year is 3rd Party implementations, and that should be it. News story to follow.

ValvePiston.jpg

Image by Engadget

As everyone is reporting, Valve hired out Xi3 Corporation to develop the Steam Box under the codename Piston. Xi3Corporation was founded in 2010 and revealed their first product at CES two years ago. In late September, Xi3 launched an unsuccessful Kickstarter to fund their latest designs: The X7A and the X3A.

The X7A Modular Computer is the most interesting as it seems to be what the Piston is based on. Regardless of the Kickstarter’s failure, Valve still reached out to Xi3 Corporation chequebook in hand. According to the Kickstarter page, the X7A has the following features:

  • 64-Bit Quad-Core x86 processor up to 3.2 GHz with 384 graphics shader cores.
    • My personal best guess is the AMD A10-4600M Trinity APU.
  • 8GB of DDR3 RAM
  • 1 TB of “Superfast” Solid State Memory
  • Four USB 3.0
  • Four USB 2.0
  • Four eSATAp
  • Gigabit E
  • 40Watt under load
  • “Under $1000” although that includes 1TB of SSD storage.
    • Also Valve could take a loss, because Steam has no problem with attach rate.

The key piece of information is the 40Watt declaration. According to Engadget who went hands-on with the Valve Piston, it too is rated for 40Watt under load. This means that it is quite likely for the core specifications of the Kickstarter to be very similar to the specifications of the Piston.

Benchmarks for the 7660G have the device running Far Cry 3 on low settings at around 34 FPS as well as Black Ops 2 running on Medium at 42 FPS. That said, with a specific hardware platform to target developers will be able to better optimize.

During the SpikeTV VGAs, Gabe Newell stated in an interview with Kotaku that third parties would also make “Steam Boxes”. They are expected to be available at some point in 2013.

Coverage of CES 2013 is brought to you by AMD!

PC Perspective's CES 2013 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Engadget

Xi3 Kickstarts Two New Modular Computers

Subject: Systems | October 3, 2012 - 04:20 PM |
Tagged: Xi3, x7a, x3a, modular computer

Xi3, a company owned by ISYS Technologies Inc, has turned to popular crowdfunding site Kickstarter for its latest project. Xi3 is aiming to raise $250,000 by October 28 to produce two new modular computers: the X3A and X7A. Both units measure 4.27" x 3.65" x 3.65" and are slated for release in early 2013.

Xi3 X3A and X7A Modular Computers.jpg

The X3A Xi3 is a power efficient business and general computing machine. It will pack a dual core processor running at 1.65GHz, 4GB of DDR3 RAM, and 32GB of solid state storage. That storage can further be upgraded to up to 1TB. Rear I/O of the X3A includes two USB 3.0 ports, four eSATA ports, four USB 2.0 ports, and one Gigabit Ethernet jack. Xi3 expects the base level model to retail for under $500 and use a mere 18 Watts of power.

Xi3 Modular Computer Components.jpg

The X7A on the other hand is meant to be a workhorse and gaming machine. Specs include a quad core processor running at up to 3.2GHz, 8GB of DDR3 RAM, up to 1TB of solid state storage, and a GPU with at least 384 shaders. This machine will support triple monitor configurations and will use around 40 Watts. Rear I/O includes four USB 3.0, four USB 2.0, four eSATA, and one Gigabit Ethernet port. This machine will allegedly be capable of playing the latest games, including Crysis 2. It has an expected shipping date of early 2013 and with prices starting at $1,000.

Xi3 Modular Computer.jpg

Personally, I like the blue colored model.

At time of writing, Xi3 has raised $24,613 from 55 backers – and has 24 days left to reach its goal. I'm interested to see whether or not Xi3 will actually be able to pull off a gaming machine in that small of a form factor. You can find more information about the X3A and X7A modular computers on Kickstarter..

Source: Xi3

Xi3 Announces The First Chrome OS Based Desktop PC

Subject: Systems | May 24, 2011 - 01:21 PM |
Tagged: Xi3, SFF, PC, ChromeOS

ChromiumPC_photo.jpg

Xi3, the makers of a series of small form factor module based computers, is launching a Chrome OS based desktop computer which they have dubbed the ChromiumPC. The ChromiumPC will be based on similar "module" technology to that in their current Xi3 computers. They have broken the traditional motherboard down into three parts and fitted them into an aluminum chasis measuring "4.0- x 3.656- x 3.656-inches." The PC will use either a single or dual core 64-bit, x86 based CPU. The device is slated for a July 4th, 2011 release, and will be generally available in the second half of the year.

If this small form factor PC is priced right, it may prove to be a popular option for schools, businesses, and people wanting a second PC.  Are you interested in desktop PCs running cloud based operating systems?

Source: Xi3