Workstation class X99 from ASRock

Subject: General Tech | October 30, 2014 - 02:59 PM |
Tagged: x99 ws, Intel X99, Haswell-E, asrock

ASRock has a Work Station class board for Haswell-E with five PCIe 3.0 slots, support for up to 128GB of RAM which can be ECC if you install an appropriate processor and on the back are four of both USB 2.0 and 3.0 ports, one eSATA ports, audio and a pair of LAN ports.  They also included A-Tuning overclocking software which seems odd for a Work Station but proved to be very important as [H]ard|OCP could not get the system they built with this board to POST at default settings and had to change UEFI settings to get it to boot.  Once it did start up the performance was solid and it was one of the better ASRock boards that [H] has reviewed though with a street price over $300 it is hard to recommend.

1414356118PQyIkyQD6F_1_8_l.jpg

"ASRock comes to us with its "Work Station" version Haswell-E motherboard. This time our out-of-box experience with its X99 WS was as rock solid as it could be and did leave us with feelings of getting to work with a quality component. As you all know, we are much more interested in how it performs at high clocks while under stress."

Here are some more Motherboard articles from around the web:

Motherboards

Source: [H]ard|OCP

ASRock Launches High End X99 WS E-ATX Motherboard For Workstations and Servers

Subject: Motherboards | August 30, 2014 - 01:10 PM |
Tagged: xeon, x99 ws, X99, workstation, socket 2011-3, Intel, Haswell-E, asrock

Alongside the X99 Extreme6 for enthusiasts, ASRock has launched the X99 WS (E-ATX) motherboard for professional workstations and servers. The board uses a black PCB, blue aluminum heatsinks on the power phase and PCH areas, and gold colored caps. The E-ATX motherboard uses short screws and a thinner CPU socket backplate to allow it to fit into 1U server cases. You have ample PCI-E slots, DDR4 (and ECC RDIMMs), USB 3.0, Thunderbolt 2 (with an AIC), eSATA, M.2, and SATA III for connectivity. Power is regulated by a 12 power phase "Digi Power" design with high quality Ultra Dual-N MOSFETs, 60A chokes, 12K Nichicon capacitors.

The X99 WS also uses larger heatsinks, especially around the CPU area. The board features an Intel LGA 2011-3 socket that will accept Haswell-E or Xeon E5-1600/2600 v3 processors up to 18 cores and 160W TDPs. Eight memory slots surround the CPU socket and support a maximum of 128GB of DDR4 3200+ memory. Storage is handled by 10 SATA III 6Gbps ports and a single "Ultra M.2" slot that supports SATA III or PCI-E x4 controller equipped drives.

X99 WS E-ATX Workstation and Server Motherboard for Haswell-E.jpg

This worskation board takes advantage of the Extended ATX form factor to cram in additional PCI-E 3.0 slots versus the shorter X99 Extreme6. A PCI-E 2.0 x 16 slot sits directly below the CPU socket followed by the (mentioned above) M.2 slot and five PCI-E 3.0 x 16 slots. The five PCI-E 3.0 slots allow for 4-Way CrossFireX and 4-Way SLI multi-GPU setups. To take full advantage of this board, you will want to pair it with the higher end Haswell-E parts (5930K, 5960X, et al) with the full 40 lanes rather than the entry level 5820K with its limited 28 PCI-E lanes.

Using internal headers, the X99 WS supports a TPM module, two COM ports, two USB 3.0 ports, four USB 2.0 ports, and a Thunderbolt port (via an extra add-in-card). It features two CPU fan and three chassis fan headers as well.

The X99 WS features the following ports on the rear IO panel.

  • 1 x PS/2
  • 4 x USB 2.0
  • 1 x eSATA
  • 4 x USB 3.0
  • 2 x Gigabit LAN
    • 1 x Intel I217LM
    • 1 x Intel I210AT
  • 7.1 Channel Audio (Realtek ALC1150)
    • 5 x Analog audio outputs
    • 1 x Optical audio output

The X99 WS is available now with a three year manufaturer warranty for $323.99. The price alone pushes this board well into the professional market, but gamers can get most of the way to the WS feature-wise with the X99 Extreme6. The WS goes up against the boards like the ASUS X99-Deluxe and MSI X99S XPOWER AC.

Source: ASRock