Subject: General Tech, Mobile | August 29, 2012 - 07:44 PM | Jeremy Hellstrom
Tagged: wireless power, wireless charging, wireless, Intel, Integrated Device Technology, charging
The wireless transfer of power, in order to recharge your mobile devices has been something that has fascinated the staff at PC Perspective for a while now. You can get toothbrushes which charge via inductance and even as far back as 2010 there were projects underway to allow cellphones to recharge without needing a wire and more importantly without needing the correct plug! More recently, the Wireless Power Consortium was a presenter at CES 2012, where they showed Matt their Qi, a coil-based charging solution capable of delivering up to 5W at a distance of 5mm, not enough to charge your phone in pocket but certainly reasonable for a charging mat. They are working on a 10W model and hope to extend it up to 120W which would be enough to power a low end PC.
Today Intel released information on their long standing wireless power technology and their new development partner, Integrated Device Technology, Inc. They intend to develop this technology on chipsets, so that a cellphone placed next to an Ultrabook would begin to wirelessly recharge without input from you. One assumes that this would not apply to a system running off of a critical battery, though the idea of being able to drain power from an unsuspecting user could lead to some interesting pranks. Check the full release below.
Even Captain Kirk would have raised an eyebrow at the prospect of wireless charging on board the Enterprise, and he probably would have given Scotty a raise! But today it’s a step closer to reality for all of us not zipping around the universe at warp speed. Demoed by Intel Labs for the first time way back in 2008, Wireless Charging Technology (WCT) by Intel literally lets you charge your smartphone wirelessly from your notebook PC. That’s right — no cables, no power cords. Of course Intel is no stranger to wireless technologies, launching Centrino mobile technology nearly a decade ago. Imagine a coffee shop without Wifi today?
Today Integrated Device Technology, Inc. (IDT) – a technology company with specialized expertise in wireless charging - announced it will develop and deliver chipsets for Wireless Charging Technology by Intel. IDT’s product is important and new because it leads to a solution that isn’t limited to inductive charging and ‘smartphone on a charging mat’ usage. Size and cost reductions are key to IDT’s solution, as is their differentiated “resonance wireless charging technology” that simplifies the way the PC charges the phone wirelessly. Intel is working with companies like IDT, peripheral vendors (from smartphone cases to printers and cameras), OEMs, and other ecosystem partners to deliver a cost-effective and simpler path to wireless charging.
Although we are not yet giving out timeframes for consumer products with WCT enabled, IDT has stated they will be delivering their full chipset solution for reference design work in early 2013. The ecosystem is already excited about this technology so we assume there will be a race to the finish line for sure.
Imagine, for example, this wireless charging solution in an Ultrabook of the future. How would it work? You are low on juice on your phone — you simply start the WCT detection software and place the smartphone close to your Ultrabook (about an inch or so). Coupling takes place between the two devices and energy begins to seamlessly and wirelessly flow from the Ultrabook to the smartphone. Within an hour, you have recharged your smartphone sufficiently to make it through the afternoon. No more wires or chargers.
Intel will be discussing specific plans and timelines at a later date, so stay tuned for more details on this innovation that’s one step closer from the labs to your home.
Subject: Mobile | June 7, 2012 - 01:54 AM | Tim Verry
Tagged: wireless, gaming laptop, gaming, computex, ASUS ROG, asus, 802.11ac, 5GHz wifi
Earlier today we posted a couple of teaser photos showing off some of ASUS’ upcoming products. One of the devices was a gaming laptop called the ASUS G75. Engadget has managed to get their hands on some more information regarding a variant of the G75 – the G75VW. According to the site, the gaming laptop is rocking an Intel Ivy Bridge processor, GeForce GTX 670M, and DDR3 memory (known because of the CPU used). That hardware is then powering a 1080p display, which the GTX 670M should have no problem driving but is a bit depressing to see on a high end laptop of this size (approximately 17”). The real kicker though is in the wireless card that it is allegedly packing: an 802.11ac card.
The ASUS G75 gaming laptop
Engadget states that although the information sheet next to the laptop at ASUS’ Computex booth did not list any 802.11ac compatibility, wireless chip maker Broadcom (manufacturer of chips that are used in many wireless routers and NICs) has stated that it does in fact have an 802.11ac NIC in it. Senior Vice President Michael Hurlston told members of the press at Computex 2012 that the ASUS G75VW is the “World’s first 5G Wi-Fi laptop.” He further stated that the computer would be arriving in the hands of consumers “very shortly.”
Interesting stuff, and although the “5G Wi-Fi” – so called because it is the fifth generation of consumer grade Wi-Fi (though not the 5th gen if you count all iterations of the wireless 802.11 standards) – is not yet official and set in stone, it is very close and I would not be surprised to see the technology in a laptop like this particular ASUS at this point in the game.
And to think that I just got done upgrading my network to Gigabit Ethernet and 802.11n about two months ago! Even so, I’m excited for the upcoming standard because I want to test its usefulness in getting live TV from my CableCARD tuner to the living room and Katy’s wireless laptop without stuttering – something even wireless N with MIMO can’t do with devices in the same room. So far, the only thing stable enough has been wired Cat5e Ethernet (both 100Mbps and 1000Mbps hardware seem to work without issues). And because it’s proving difficult to get a wired connection from the router to the TV (Xbox 360 used as Windows Media Extender), I’m ready to try out some 802.11ac stuff to see if it can really deliver on the increased bandwidth!
Subject: Networking | May 15, 2012 - 05:38 PM | Tim Verry
Tagged: wireless, router, networking, ethernet bridge, buffalo, 802.11ac
Netgear and Buffalo have been working hard to build and get to market new wireless routers based on the 802.11ac (pending ratification) standard. PC Perspective recently ran a giveaway for the Netgear 802.11ac router, but it seems that Buffalo has managed to beat them to market with their new gear. In fact, Buffalo yesterday released two 802.11ac devices with the AirStation™ WZR-D1800H wireless router and WLI-H4-D1300 wireless Ethernet bridge. Both devices are powered by Broadcom’s 5G WiFi chips (what Broadcom refers to 802.11ac as–the fifth generation of consumer WiFi) and based around the IEEE standard that is set to become an official standard early next year.
The Buffalo 802.11ac Router (left: front, right: rear view)
The router and Ethernet bridge both support the upcoming 802.11ac standard as well as the current 802.11 b, g, and n standards so they are backwards compatible with all your devices. They also support all the normal functions of any other router or bridge device–the draft support for 802.11ac is what differentiates these products. The router stands vertically and has a router reset and USB eject buttons, one USB 2.0 port, four Gigabit Ethernet LAN ports, and one Gigabit Ethernet WAN port. Below the WAN port is a power button and DC in jack. The Buffalo Ethernet bridge allows users to connect Ethernet devices to a network over WiFi. It looks very similar to the router but does not have a WAN port or USB port on the back. It also does not act as a router, only a bridge to a larger network. The largest downside to the Ethernet bridge is pricing: (although out of stock now) Newegg has the bridge listed for the same price as the full fledged router. At that point, it does not have much value–users would be better off buying two routers and disabling the router features on one (and because the Broadcom chipset should enable custom firmwares, this should be possible soon).
The Buffalo 802.11ac Ethernet Bridge (left: front, right: rear view)
What makes these two devices interesting though is the support for the “5G WiFi” 802.11ac wireless technology. This is the first time that the Wireless connections have a (granted, theoretical) higher transfer speed than the wired connections, which is quite the feat. 802.11ac is essentially 802.11n but with several improvements and only operating on channels in the 5GHz spectrum. The pending standard also uses wider 80 Mhz or 160 MHz channels, 256 QAM modulation, and up to eight antennas (much like 802.11n’s MIMO technology) to deliver much faster wireless transfer rates than consumers have had available previously. The other big technology with the upcoming WiFi standard is beamforming. This allows wireless devices to communicate with their access point(s) to determine relative spatial position. That data is then used to adjust the transmitted signals such that it is sent in the direction of the access point at the optimum power levels. This approach is different to traditional WiFi devices that broadcast omni-directionally (think big circular waves coming out of your router) because the signals are more focused. By focusing the signals, users get better range and can avoid WiFi deadspots.
Hajime Nakai, Chief Executive Officer at Buffalo Technology stated that “along with Broadcom, we continue to demonstrate our commitment to innovation by providing a no-compromise, future proofed wireless infrastructure for consumers’ digital worlds.”
The Buffalo AirStation™ WZR-D1800H router and WLI-H4-D1300 Ethernet bridge are available for purchase now for around $179.99 USD. The Ethernet bridge is listed as out of stock on Newegg; however, the router is still available (and the better value).
Podcast #188 - Featuring David Hewlett - White Space Wireless, AMD and NVIDIA GPU roadmaps, Hard Drives with lasers and more!
Subject: Editorial, General Tech | February 9, 2012 - 04:08 PM | Ken Addison
Tagged: wireless, whitespace, ssd, podcast, nvidia, mdt, intel 520, Intel, gpu, APU, amd
PC Perspective Podcast #188 - 02/09/2012
Join us this week as we talk about White Space Wireless, AMD and NVIDIA GPU roadmaps, Hard Drives with lasers and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the iTunes Store
- RSS - Subscribe through your regular
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Josh Walrath, Allyn Malvantano, and David Hewlett
This Podcast is brought to you by
- 1-888-38-PCPER or firstname.lastname@example.org
- http://twitter.com/ryanshrout and http://twitter.com/pcper
- 0:01:30 Introduction with David
- Okay, seriously, how nerdy are you really?
- What kind of hardware systems and specs do you have?
- What games are you playing today?
- 0:13:25 AMD Processor and GPU Roadmaps Through 2013
- 0:28:30 Galaxy MDT GeForce GT 520 Graphics Card Review
- 0:32:00 Intel 520 Series SSD Full Review - SandForce on Steroids?
- 0:43:00 This Podcast is brought to you by
, and their all new Sandy Bridge Motherboards!
- 0:45:05 White Space Wireless Discussion
- 0:56:00 Increased Hard Drive Write Speed and Density - Using Frickin' Lasers
- 1:02:00 An academic collaboration leads to a GPU/CPU collaboration
- 1:07:25 AMD shows 18mm thin reference ultrathin notebook based on Trinity
- 1:11:05 Tablets / Ultrabooks in Schools
- 1:16:45 NVIDIA Kepler Graphics Cards Lineup Leak To Web
- 1:22:30 PC Perspective Office Tour - Feb 6th, 2012
- 1:26:40 Hardware / Software Pick of the Week
- 1-888-38-PCPER or email@example.com
- http://twitter.com/ryanshrout and http://twitter.com/pcper
Subject: Mobile | January 13, 2012 - 02:27 PM | Matt Smith
Tagged: CES, wireless power, wireless, tablet, smartphone, mobile, charging
Where was the most interesting technology at CES? Intel’s booth? Nope. Nvidia’s booth? Guess again. Perhaps you could find it at Qualcomm’s stand? Guess again.
If you ask me, the most interesting technology was tucked away in the back of the lower level of the South Hall, which is where you’ll find smaller companies and organizations that have decided to forgo a normal booth and instead just rent out space for a meeting room. That’s where you’ll find The Wireless Power Consortium and its Qi wireless power standard.
Wireless power is exactly what it sounds like. You may have already heard of the charging mats made available by companies like Energizer. These allow users to charge a smartphone simply by placing them in the right location, forgetting about cords entirely.
Sounds nice, doesn’t it? But there’s been a problem with them – until recently, they’ve all been proprietary. You had to use a special charging case to get the mats to work with your phone and that case wouldn’t work with competing products. You also were limited to charging in your home (or wherever you place the charging mat) which kind of defeats the point.
To fix this, there must be a standard, and that’s what The Wireless Power Consortium has created. It’s called Qi, and it’s a coil-based charging solution that can be implemented in all sorts of mobile devices. Currently the standard can handle up to 5 watts and can work within 5mm, but both of these figures are to be expanded. New technology that can handle 10 watts is being tested, and the hope is for 120 watts to be achievable in the near future. That would allow for wireless charging of PCs and appliances.
But enough about the specifications. Why am I excited about Qi? Let me explain.
Many current smartphones have mini-USB ports for one reason only – charging. Everything else, from syncing music to downloading files, can be achieved through a wireless connection. If that port could be removed entirely, it would allow for more design flexibility. Take the current Droid Razr, for example. It is extremely thin except for a bulge that houses the camera and the ports. If you could charge your phone wirelessly, designers would have one less port to design around.
Battery life is another part of this equation. As technology in our mobile devices continues to improve at an amazing rate, battery technology doesn’t seem able to keep up. I know – I own a HTC Thunderbolt. My phone has notoriously bad battery life with 4G LTE enabled.
One solution is to make batteries bigger, but that increases weight, size and cost. Wireless power offers an alternative – make charging easier and more frequent. If you had wireless power in your car, at work and at home, your phone could easily maintain a high level of charge. And since it’s wireless, you don’t have to do anything except place your phone in the right place.
The Wireless Power Consortium booth – er, meeting room – had some interesting examples to show me. One was a table with a built-in Qi compatible charger that can be deployed at restaurants, coffee shops and other places. In fact, some such tables can already be found in Japan and China. They number only in the hundreds, but it’s start.
For our Asian friends, who use more public transportation and tend to live in more densely packed cities, charging tables make a lot of sense. But here in North America we tend to get around with our own private vehicles. To help the standard get traction here, The Wireless Power Consortium is working with auto manufacturers to place wireless charging in automobiles. They hope that we’ll see it offered in a few vehicles starting the 2013 model year.
There are a lot of pieces that need to find their place in order for Qi to really take off, but they at least have the necessary partners including big names like Motorola and Texas Instruments, among many others. Keep an eye on this over the next year – it could end up being a true game changer.
PC Perspective's CES 2012 coverage is sponsored by MSI Computer.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | August 10, 2011 - 02:38 PM | Jeremy Hellstrom
Tagged: killer nic, bigfoot, wireless, Killer-N 1102
The KillerNIC has had an odd relationship with the PC world, with most reviewers initial impression being that of a solution in search of a problem. In some cases when a person wanted to get fancy with downloading torrents, especially when they were gaming online at the same time, the initial product did offer some advantages. From there it found its self integrated onto some high end motherboards, offering more features than a regular gigabit NIC but again offering limited benefits.
New to the market is the Bigfoot Killer-N 1102 Wireless N device, integrated into some new laptops. AnandTech had a chance to try it out; once they could determine a way to review a wireless device. Finally it seems that BigFoot managed to knock one out of the park, the performance was significantly better than what is offered by the current generic wireless NICs present in most laptops. Check out why it is such an improvement in their full review.
"With that out of the way, let’s discuss what Bigfoot brings to the table, specifically with their Killer 1102 part. Note that there is a faster Killer 1103 part now shipping with 3x3:3 MIMO support; we will try to get a sample for future testing, but for now we’ll confine our benchmarks to the 1102. The core hardware actually comes from a well-known wireless networking company, Atheros. The 1102 uses the AR9382 wireless chipset, but Bigfoot has added their own “special sauce” to improve performance."
Here is some more Tech News from around the web:
- Embedded SSDs go connector-less @ SemiAccurate
- ZAVIO F3106 Wireless IP Camera Review @ Real World Labs
- Firm offers 1,000 year discs that use a special optical drive @ The Inquirer
- Fake Firefox update bundles Trojan add-on @ The Register
- Google promises fix for jittery Usenet addicts @ The Register
- Ninjalane Podcast - Overclocking Motherboard Design Video Card Selection
- Weekly Giveaway #10: Thermaltake TR2 700W and TR2 600W Power Supplies @ eTeknix
Subject: Displays | July 26, 2011 - 02:58 PM | Jeremy Hellstrom
Tagged: wireless, tn lcd, samsung C27A750, Samsung, 27
The Samsung C27A750 27” Central Station Wireless Monitor is a 27" 1080p TN LCD monitor which is intended to solve your wiring problems. It sports HDMI and D-sub for video, along with a wireless USB 2.0 dongle but there are also a pair of USB 3.0 ports, a pair of USB 2.0 ports, a 3.5mm jack for speakers and a network port. Essentially it mimics a multifunctional dock while also being a 27" monitor which can be connected wirelessly to a PC. As positive as this multi-functional base sounds, Hardware Canucks were disappointed with its physical stability as the base is the same size as the 24" model. Their testing revealed good points and bad points about the display and dock, perhaps the biggest being that you should not even consider gaming over the wireless connection. As well, a 27" display at 1080p is not optimal but for use as a secondary display with a laptop, netbook or even smart phone the dock and wireless capabilities are impressive.
"During this year's CES, Samsung debuted their Central Station technology which promised to combine an all in one connectivity and networking hub into a high performance monitor. This centralized approach will surely appeal to notebook, tablet and netbook users since it can expand screen real estate while eliminating the need to attach unwanted wires to an otherwise quick setup. One of the first products to feature Central Station technology is the C27A750 27” monitor."
Here are some more Display articles from around the web:
- Benq BL2400 24" Monitor Review @ t-break
- AMD Six Screen Eyefinity Review @ eTeknix
- Warpia StreamHD SWP120A Wireless HDMI @MissingRemote
- LG Cinema 3D TV 42LW5700 Review @ t-break
Subject: Systems | July 13, 2011 - 12:55 PM | Jeremy Hellstrom
Tagged: wireless, htpc, hdmi
At its heart the VStream WPCTV1080H is comprised of an L-shaped USB 2.0 dongle for your PC and a second dongle which plugs into the base station which also has a power cord and HDMI plug. This setup, along with a 2.4GHz dual core processor, is intended to transmit up to a 1080p signal wirelessly from the computer with the dongle to the base station and on to your TV. The Tech Report gave the $120 VStream a try and found that the bandwidth available over USB 2.0 caused some problems, ranging from dropped frames and colour banding when watching movies to nasty aliasing on 2D application, especially when they tried using it to connect to a 24 " monitor and used it to browse the web. Lets hope there is a USB 3.0 version in the works, or even a wireless DisplayPort model.
"This $120 adapter promises to output 1080p video wirelessly via nothing more than a USB dongle. Does it fulfill its promise, and is it worth the money?"
Here are some more Systems articles from around the web:
- Elgato HDHomeRun HDHR3 Dual Tuner Review @MissingRemote
- ASRock CoreHT 252B Sandy Bridge HTPC @ Tweaktown
- Remote Potato HD for the iPad Review @MissingRemote
- AC Ryan PlayOn!HD2 @ techPowerUp
Subject: General Tech | May 5, 2011 - 06:04 PM | Jeremy Hellstrom
Tagged: mouse, wireless, gaming, gigabyte
Gigabyte has joined in the attempts of many companies to convince gamers that wireless mice are cool. With 50 hours of battery life and 6500DPI sensor the Aviva M8600 sounds good on paper but until you get it on the mat you will never know how well it performs. Hardware Secrets were certainly impressed by its ambidexterity, they were just as uncomfortable using it with the left hand as with the right. No complaints about input lag though.
"Gamers usually shun wireless peripherals, always wary of a possible energy loss. No one wants to rummage around for a cable and lose an online match. With that in mind, Gigabyte has released a wireless gaming-grade mouse with a long lasting 50 hour battery that comes with an extra battery that you can rapidly switch. Besides those characteristics, the Aivia M8600 reaches 6,500 DPI and features a design for both right- and left-handed users, plus ten reprogrammable buttons. Let's talk first about its physical aspects and then test its wireless operation."
Here is some more Tech News from around the web:
- Microsoft Express Mouse @ Maximum CPU
- Roccat Kone [+] Review @ t-break
- ROCCAT Alumic Gaming Mousepad Review @ Madshrimps
- Razer Onza Tournament Edition Controller Review @ t-break
- Razer Onza Tournament Edition XBOX 360 Controller Review @ HardwareHeaven
- Razer BlackWidow Ultimate Mechanical Gaming Keyboard Review @ HardwareHeaven
Subject: Displays | May 2, 2011 - 06:46 PM | Jeremy Hellstrom
Tagged: widi, wireless, hd, 1080p, stream
Wireless video streaming is nothing new to PC Perspective, in 2010 we saw Intel's WiDi technology and Ryan was streaming 1080p Iron Man using the Galaxy GeForce GTX 460 WHDI card (aka Little Cthulhu). A new way to achieve the same results is with the brite-View Air SyncHD which Missing Remote just reviewed. Read on to see if this is worth ~$230 of your hard earned money.
"If wirelessly transmitting a Blu-ray stream (which tops out around 50mbps) is questionable, transmitting uncompressed 1080p/60 video seems downright impossible. Yet, that is exactly what brite-View claims to do with their Air SyncHD transmission kit. In a nutshell, the brite-View Air SyncHD transmission kit promises to wirelessly bridge an HDMI source device and HDMI receiving device, freeing you to place the devices anywhere within the system’s wireless range. Further, the system manages to send 1080p/60 video, audio and infrared (IR) with less than one millisecond latency up to 66 feet. It sounds great on paper, but can it deliver?"
Here are some more Display articles from around the web:
- AOC e2343F2 LED Monitor Review @ t-break
- ASUS ML248H 24” Monitor Review @ Hardware Canucks
- Sony Bravia KDL-46EX720 Review @ TechReviewSource
- Samsung UN46D6400 Review @ TechReviewSource