Introduction, Specifications, and Packaging
Western Digital launched their My Passport Wireless nearly two years ago. It was a nifty device that could back up or offload SD cards without the need for a laptop, making it ideal for photographers in the field. I came away from that review wondering just how much more you could pack into a device like that, and today I get to find out:
Not to be confused with the My Passport Pro (a TB-connected portable RAID storage device), the My Passport Wireless Pro is meant for on-the-go photographers who seek to back up their media while in the field but also lighten their backpacks. The concept is simple - have a small device capable of offloading (or backing up) SD cards without having to lug along your laptop and a portable hard drive to do so. Add in a wireless hotspot with WAN pass-through along with mobile apps to access the media and you can almost get away without bringing a laptop at all. Oh, and did I mention this one can also import photos and videos from your smartphone while charging it via USB?
- Capacity: 2TB and 3TB
- Battery: 6,400 mAH / 24WH
- UHS-I SD Card Reader
- USB 3.0 (upstream) port for data and charging
- USB 2.0 (downstream) port for importing and charging smartphones
- 802.11AC + N dual band (2.4 / 5 GHz) WiFi
- 2.4A Travel Charge Adapter (included)
- Plex Media Server capable
- Available 'My Cloud' mobile apps
No surprises here. 2.4W power adapter is included this time around, which is a nice touch.
Subject: Storage | April 19, 2016 - 08:00 AM | Allyn Malventano
Tagged: Xe, western digital, wdc, WD, se, RE, Media Cache, hgst, HelioSeal, gold, 8TB
Western Digital rolled out their Se / Re / Xe branding back in mid-2013. Since that time, a lot has changed in the rapidly evolving enterprise storage industry. SSDs are encroaching into more of the data center rack space out there, and the need for small capacity 10k and 15k RPM drives is dropping substantially in favor of more power efficient (in power and capacity per dollar), larger spinning disks.
With these winds of change comes today’s announcement from Western Digital:
The new Gold lineup appears to be a merging of old and new product lines. The 6TB and below Re series are essentially being absorbed under the new Gold label, but 6TB will no longer be the top capacity offered to WD enterprise customers. A new 8TB capacity will be offered in the form of a HelioSeal drive. The 8TB model will share more parts with the HGST He8 than WD’s previously released 8TB Red, including HGST’s Media Cache architecture, which should yield a nice boost to sustained random write performance over drives lacking this technology.
The press release does not state this, but I suspect WD will be phasing out their Se and Xe product lines over the coming months in favor of Helium-filled drives of the 5400 (Red) and 7200 (Gold) RPM variety. Fewer lines to manage should help them tighten things up a bit and reduce costs even further over time.
We’ll be reviewing the new 8TB Gold just as soon as samples arrive for testing, so stay tuned!
Full press blast appears after the break.
As we were publishing our full review of the Western Digital Red 8TB, we noted something odd. While the street prices of the bare drives seemed to be a bit high ($333), the WD My Book was on sale for $250. Ryan happened to look them up and discovered that our local Best Buy actually had them available for store pick-up. Since the 8TB Red and My Book 8TB were launched simultaneously, and we were just provided early samples of the 8TB Reds last week, how could there already be 8TB Reds on the shelf just down the street? Could they have shipped some earlier form of the 8TB Red in the external My Book and continued tweaking their NASware algorithms / firmware prior to the Red launching? Our curiosity got the best of us, and we decided to find out.
Sebastian ran out to his local Best Buy and picked up a single WD My Book 8TB model, promptly took it home and ripped it open. I don’t think he even plugged it in first. This is what he found:
Well, that’s not a Red label, but it does say Western Digital, and it’s clearly a HelioSeal housing (common to HGST He Series and WD Red 8TB). One thing that immediately stuck out to me was the model number. WD model numbers have a specific pattern (WD80EFZX), and that number above does *not* follow that pattern. The pattern it does follow, however, is that of the HGST He8 line:
Sebastian noted something else almost immediately. The label looked like it was on top of another one. Peeling this one back showed this pure white label:
…and peeling back *that* label gave us this:
Introduction and Specifications
Storage devices for personal computers have always been a tricky proposition. While the majority of computer parts are solid state, the computer industry has spent most of its life storing bits on electromechanical mechanical devices like tapes and floppy disks. Speaking relatively, it was only recently (less than a decade) that solid state storage became mainstream, and even today the costs of flash production make rotating media the better option for bulk data storage. Hard drives are typically vented to atmosphere, as the Bernoulli Effect is necessary as part of what keep the drive heads flying above the rotating platters. With any vented enclosure, there is always the risk of atmospheric contaminants finding their way in. Sure there are HEPA-class filters at the vent holes, but they can’t stop organic vapors that may slightly degrade the disk surface over time.
By filling a hard disk with an inert gas and hermetically sealing the disk housing, we can eliminate those potential issues. An added bonus is that if Helium is used, its lower density enables lower air friction of the rotating platters, which translates to lower power consumption when compared to an equivalent air-filled HDD. Ever since HGST released their Helium filled drives, I’ve been waiting for this technology to trickle down to consumer products, and Western Digital has recently brought such a product to market. Today we will be diving into our full performance review of the Western Digital 8TB Red.
Compared to the 6TB Red, the 8TB model doubles its cache size to 128MB. We also see a slight bump in claimed transfer rates. Idle power consumption sees a slight bump due to different electronics in use, and power/capacity figures check out as well (more on that later as we will include detailed power testing in this article).
Podcast #389 - Thermaltake Core X9, the Controversy around DirectX 12, FreeSync HDMI Displays, and more!
Subject: General Tech | March 3, 2016 - 03:24 PM | Ken Addison
Tagged: WD, video, uwp, thermaltake, Samsung, reeven, podcast, Okeanos, Microsoft Store, HelioSeal, hdmi, freesync, dx12, Core X9, brontes, ashes of the singularity
PC Perspective Podcast #389 - 03/03/2016
Join us this week as we discuss the Thermaltake Core X9, the Controversy around DirectX 12, FreeSync HDMI Displays, and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store (audio only)
- RSS - Subscribe through your regular RSS reader (audio only)
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Josh Walrath, Allyn Malventano, and Morry Tietelman
Program length: 1:32:49
And the VLAN on Saturday!
Week in Review:
0:51:40 This episode of PC Perspective Podcast is brought to you by Braintree. Even the best mobile app won’t work without the right payments API. That’s where the Braintree v.0 SDK comes in. One amazingly simple integration gives you every way to pay. Try out the sandbox and see for yourself at braintreepayments.com/pcper
News items of interest:
Hardware/Software Picks of the Week
Allyn: Sony DSC-RX10 II
Subject: Storage | March 1, 2016 - 08:00 AM | Allyn Malventano
Tagged: WD, hgst, HelioSeal, He8, He6, He10, 8TB
Helium-filled HDD technology has been around for a few years, but since HGST launched their He series a couple of years ago, Helium has been stuck in the enterprise sector. Western Digital has been in a lengthy merger process with HGST, and I figured (hoped) that it would be only a matter of time before we saw Helium-filled consumer HDDs. I’m happy to report that time is now:
The first product lines to see this expansion will be WD’s external offerings (My Book / My Book Duo / My Cloud / My Cloud Mirror / My Cloud EX2 Ultra) and a few internal lines (Purple / Red / Red Pro). Taking a look at the new housing for the 8TB Red:
…we can tell that it appears to be the same HelioSeal tech used by HGST, right down to the external housing design. Here is an HGST He8 housing for reference / comparison:
I’m excited to see He making its way down the product chains, as a sealed HDD enclosure significantly reduces environmental effects on HDD reliability and performance. Helium also means less air friction, causing less heat production and therefore less power consumption. While the capacities are higher, we suspect performance won’t be taking any large leaps with WD’s first generation of Helium filled Hard Disk Drives. We will be testing a few of these once samples arrive and will deliver a full review as soon as possible. Since it appears that Western Digital was holding off on their 8TB capacity point until HelioSeal was integrated, it's a safe bet that their other product lines will receive the same technology and capability in the future.
Subject: Storage | October 21, 2015 - 09:22 AM | Sebastian Peak
Tagged: western digital, WD, sandisk, ssd, hard drives, solid-state drive
Western Digital has agreed to purchase Sandisk for $19 billion in cash and stock, a deal which values Sandisk at $86.50 per share and represents a 12% premium over yesterday's closing price. Current Western Digital CEO Steve Milligan will remain in charge of the company, which retains its headquarters in Irvine, California, while SanDisk's CEO Sanjay Mehrotra is expected to remain with Western Digital and join their board of directors.
Sandisk had reportedly been looking for a buyer, with Micron the other likely candidate according to this morning's report from The Wall Street Journal. The move should help to better position Western Digital in the SSD space, something rival Seagate appeared to be focused on when purchasing LSI last year. Neither company has any significant presence in the consumer solid-state market dominated by Samsung, and it will be interesting to see where WD goes with the Sandisk brand.
Introduction and Specifications
It has been a while since we took a look at some hard drives here at PC Perspective. While seemingly everyone is pushing hard into Solid State Storage, those spinning platters have gotten the computer industry by for several decades, and they won't be going away any time soon so long as magnetic domains can store bits for cheaper than electrons can. SSDs have been eating away at the market for OS and single drive mobile needs, but when it comes to bulk storage, nothing beats a great hard drive for the money. Since many users would rather avoid maintaining a large array of drives, getting the capacity of each 3.5" unit higher is still a need, especially for storage hungry consumers. Enterprise units have been pushing into 8TB territory lately, but the consumer sweet spot currently remains at 6TB. Western Digital entered this area in July of last year, pushing their popular Green and Red lines up to 6TB. While the capacity was great, those two lines are mean to be power saving, slower spinning drives. When platter speeds are low, the laws of physics (and of rotational latency) kick in and dictate that they could never perform as well as their 7200 RPM counterparts.
...and now they have filled that gap, with their Black and Red Pro models now made available in up to 6TB capacities. To clarify the product lines here, the Green and Black products are intended for usage as a single drive, while the Red and Red Pro are meant for operating in NAS devices and use in a RAID. The two drives in this review are the faster spinning models, so we should see better performance all around. Spinning those platters faster means more power drawn and more heat generated by air friction across the platters, as we can look into below:
Western Digital Red Pro 6TB:
- Model: WD6001FFWX
- Max Sequential Read: 214 MB/s
- Form Factor: 3.5”
- Interface Type: SATA 6.0 Gb/s (SATA 3)
- UBER: <1 in 1015
- Power (active/idle/standby): 10.6W/7.4W/1.6W
- Warranty: 5 years
Western Digital Black 6TB:
- Model: WD6001FZWX
- Max Sequential: 218 MB/s
- Form Factor: 3.5”
- Interface Type: SATA 6.0 Gb/s (SATA 3)
- UBER: <1 in 1014
- Power (active/idle/standby): 10.6W/7.6W/1.6W
- Warranty: 5 years
For comparison, the slower spinning 6TB Red and Green models run at 5.3W/3.4W/0.4W. Lesson learned - moving from ~5400 RPM to 7200 RPM roughly doubles the power draw of a high capacity 3.5" HDD. Other manufacturers are doing things like hermetically sealing their drives and filling them with Helium, but that is a prohibitively expensive proposition for consumer / small business drives, which is what the Black and Red Pro lines are meant to satisfy. It has also been proven that Helium filled drives are not the best if their track geometry is not optimized as well as it could be.
Subject: Storage | September 8, 2015 - 03:43 PM | Allyn Malventano
Tagged: western digital, wdc, WD, thunderbolt, My Book Pro
Western Digital has launched a new Thunderbolt RAID-capable external drive called the My Book Pro:
The My Book Pro connects a pair of 3, 4, 5, or 6TB HDD's to a host system via either 20 Gbps Thunderbolt or USB 3.0 (at 5 Gbps). The unit comes preconfigured as a RAID-0 to give full capacities of 6, 8, 10, or 12 TB, but can be switched to RAID-1 or JBOD mode upon connection to a host system. Note that RAID-1 (mirroring) will cut the usable capacity in half - limiting to the capacity of a single drive. As seen above, there are also a pair of USB 3.0 ports at the front of the unit for connecting additional devices to the host via the My Book Pro.
Looking at the rear, we see a pair of Thunderbolt ports (daisy chaining of up to six My Book Pros is supported), as well as a USB 3.0 port.
We are not sure which drives come pre-installed, but the press release clearly states 7200 RPM and since WD just launched a higher capacities of the Red Pro, we'd guess that was their choice here.
Subject: Storage | August 18, 2015 - 08:00 AM | Allyn Malventano
Tagged: western digital, wdc, WD, Red Pro, hdd, Black, 6tb
It's been a while since Western Digital updated their Black series of HDDs, with their 4TB release taking place over two years ago. I'm happy to say that for those looking for a massive HDD suited for holding that enormous games folder too large to fit on your SSD, your wait is finally over, as today WD has updated the Black line to include 5TB and 6TB capacity units.
The Black series introduced that nifty dual stage actuator technology nearly five years ago, and has added a few more bells and whistles along the way. These new models include a 128MB cache and run on dual-core processors.
Along with that news also comes an update to their Red Pro series, which was also limited to 4TB in capacity when they launched last year. Red Pro models will now also include 5TB and 6TB units, so those wanting the most performance and lowest response time from their NAS can now also enjoy that performance at a 50% gain in capacity.
The new 6TB Red Pro also includes a 128MB cache and can peak at 214MB/sec (at the start of the disk). Also included in these is WD's NASware 3.0 firmware, which is specifically tuned to enable packs of these operating in packs while minimizing the effects of vibration on performance.
The 5TB Black comes in at $264 while the 6TB comes in at $294. The Red Pro's come at only an additional $5 over the Black, respectively (small price to pay for better compatibility with larger arrays). Both the Red Pro and Black carry a 5-year warranty.