Choose your own pump, the Monsoon Modular Reservoir System

Subject: Cases and Cooling | November 9, 2015 - 04:51 PM |
Tagged: water cooler, reservoir, Monsoon Modular Reservoir System, Monsoon

As you can see in the picture below the Monsoon Modular Reservoir System requires some assembly before it can be used but once you have set it up you will have a unique looking reservoir.  The clear tube that holds your cooling liquid is perfect for those who want to build a case with fluorescing or just coloured liquid to match the theme of your mod.  The fact that you can choose your own pump motor, keeping size in mind, will also appeal to modders and quiet computing fanatics, you will not be stuck with one that does not meet your need.  The kit Modders-Inc ordered ran them just under $70, not the cheapest reservoir on the market but within reason for their target audience.


"Of the all the reservoir types available in the market, the tube res has always been preferred mainly due to its large visibility and ease of installation. However, for the most part the design hadn't changed much until a couple years ago compression style reservoirs emerged into the market. Monsoon has developed their own compression style reservoir that has just …"

Here are some more Cases & Cooling reviews from around the web:



Source: Modders Inc

CRYORIG Announces A-Series Hybrid Liquid CPU Coolers

Subject: Cases and Cooling | November 4, 2015 - 03:24 PM |
Tagged: water cooler, liquid cooler, CRYORIG A80, CRYORIG A40 Ultimate, CRYORIG A40, CRYORIG, cpu cooler, closed-loop, AIO

CRYORIG has a new take on the venerable closed-loop liquid CPU cooler, addressing concerns about the temps of surrounding components on the board by including a reversible fan which mounts to the CPU block.


“The CRYORIG’s A40/A40 Ultimate and A80 HLC units are built on the base of Asetek’s 5th Generation Pump and CPU Cold Block technology with a small but obvious twist. With an additional adjustable and detachable Airflow fan, the CRYORIG A Series HLC is capable of lowering the temperatures of the components surrounding the CPU by up to 20%.”

There are three models in the series, with a standard 240 mm width A40, the A40 Ultimate which features a thicker 1.5-inch radiator (38.5 mm vs. 27.5 mm), and the 280 mm A80.

The company has released this slick video to demonstrate the difference this additional fan makes:

It’s an interesting concept and certainly any airflow over motherboard components it better than none, though I am slightly worried about increased noise from the 70 mm pump-mounted fan providing the hybrid cooling.

The new coolers are being released in Japan on November 5, with “mid-to-late November” promised for worldwide availability.


The LEPA AquaChanger 240 AIO CPU Cooler, marketing or magnificence?

Subject: Cases and Cooling | June 26, 2015 - 03:03 PM |
Tagged: water cooler, lepa, AquaChanger 240, AIO

This particular watercooler comes with long list of features which sound interesting on paper but need to be tested to see how effective they really are.  The fans are very effective at pushing air through the radiator but [H]ard|OCP found them a bit loud, on the other hand the pump could not be heard at all so if you were to modify the fan speed you could have a very quiet cooler, at the cost of some performance.  The cooling performance was almost exactly the same as the SilverStone Tundra TD02-E but the LEPA is available for under $100 which makes it a better value while still retaining decent performance. 


"LEPA comes to us today with its new AquaChanger 240 AIO CPU Cooler for review. LEPA lists a lot of cool sounding features like, Central Diffusing Passage Cold Plate, Protrusive Copper Base, Dual Convex Blade Fans, Ceramic Bearing Pump, and maybe the best is Anti-Leakage Tubing...because nobody likes leaky tubing."

Here are some more Cases & Cooling reviews from around the web:



Source: [H]ard|OCP

Another look at the Corsair H75

Subject: Cases and Cooling | December 5, 2014 - 04:35 PM |
Tagged: corsair, Hydro H75, AIO, water cooler

[H]ard|OCP are returning to several of the CPU coolers that they have reviewed over the past year to provide a more up to date and accurate comparison of their current performance.  They have deployed a new testbench and so there are a few coolers that were tested on older hardware and so the performance they observed does not refer to current hardware.  In order to give you an informed opinion on the current contenders for your cash they have replicated their Corsair Hydro H75 with comparison charts that show the performance of various coolers all on the same hardware and with current pricing.  If you are already familiar with the H75 then you can jump to the last page for the overall results and price to performance measurements, those who did not read their initial review should take the time to read through the full review.


"Corsair has been in the liquid CPU cooling game for over 10 years now. As sealed system liquid CPU coolers have become the norm among hardware enthusiasts, the competition has gotten stiff to say the least. Another thing that has changed over the years is that many DIYers are going to smaller cases for their systems."

Here are some more Cases & Cooling reviews from around the web:


Source: [H]ard|OCP

Revisiting an old favourite, Corsair's H60 is still going strong

Subject: Cases and Cooling | November 25, 2014 - 12:57 PM |
Tagged: corsair, h60, AIO, water cooler

It is somewhat surprising to realize that the Corsair H60 has not been updated since 2013 and even more surprising that it remains relevant even after what equates to a huge slice of time in the component industry.  It retails for $60 and is compatible with every modern AMD and Intel socket and thanks to its compact design it can fit in smaller systems that the competitions larger coolers cannot.  The H60 now falls towards the middle of [H]ard|OCP's performance charts with larger coolers providing a better result but only in systems which they can fit into and also commanding a much higher price than the H60. It may no longer be at the top of the cooler rankings but when you look at the price to performance and flexibility the H60 remains a viable choice for those shopping for an aftermarket cooler.


"Today we are re-reviewing an older All-in-One CPU from Corsair that is surely a stalwart in the CPU cooling industry. The H60 AIO CPU cooler is a cost effective choice for those enthusiasts looking for a good solution at a good price. The redesigned H60 has been in the market place for 2 years now, which is saying something if it is still competitive."

Here are some more Cases & Cooling reviews from around the web:


Source: [H]ard|OCP

Antec bumps up it's Kuhler series with the 1250

Subject: Cases and Cooling | February 24, 2014 - 02:45 PM |
Tagged: antec, all in one, water cooler, KUHLER H20 1250

As you might expect from the name, the Antec Kuhler 1250 is a larger version of the popular all in one liquid CPU coolers. This model is designed for overclockers, with a radiator measuring 159mm x  120mm x  27mm which does limit the amount of enclosures it will fit in unless you plan on an external mount.  As it is only $10 more than the smaller 950 it comes out ahead on [H]ard|OCP's dollar to performance ratio; at $120 it is a bit of an investment but for overclockers it is a decent solution to heat problems.


"Antec and its All-In-One sealed system CPU coolers have been around for a good while now. We still have some of its first series working well here in the HardOCP offices. Today we have Antec's newly designed high end Kuhler model 1250. It has some unique offerings all based on new cold plates and big double fan radiator."

Here are some more Cases & Cooling reviews from around the web:


Source: [H]ard|OCP

A semi-modifiable watercooler from Swiftech

Subject: Cases and Cooling | March 11, 2013 - 03:20 PM |
Tagged: swiftech, H220 Compact Drive II, AIO, water cooler

Swiftech has made an All In One watercooler with a bit of a difference, not only will it work straight out of the box, changing the fluid and tubing will not void your warranty like many other AIO coolers.  The 269mm x 127mm x 29mm radiator has a pair of 120mm fans cooling it, an unsealed Fill Port for changing your cooling liquid and two ports for 5/8" outer, 3/8" inner tubing which can also be swapped out.  Pro-Clockers found it to be a decent performer though somewhat outclassed by coolers using 140mm fans but far more flexible and upgradeable.  If you are looking for an AIO cooler that you can add to later on then keep your eyes our for the Swiftech H220 which should be for sale in the very near future.


"Swiftech has been sitting back in the cut watching the market and seeing what to do and what more they can do to make their entry into the lower cost AiO market. That entry is the H220 Compact Drive II CPU Cooler. Gabe and company has release a cooler than is more than “an install it and leave it type” solution. This new cooler can be upgraded in many ways. Meaning you can add water blocks as your system grows, refill with the liquid of your liking, add more tubing to accommodate the added blocks as well as other steps to assure that you have a water-cooling system for a life time."

Here are some more Cases & Cooling reviews from around the web:


Source: Pro-Clockers

ASUS Shows Off ROG ARES II GPU With Sealed Loop Water Cooler

Subject: Graphics Cards | January 19, 2013 - 01:26 AM |
Tagged: water cooler, sealed loop, ROG ARES II, gpu cooler, asus, amd, 7970 ghz edition

ASUS has taken the wraps off of a new dual GPU graphics card that comes equipped with a sealed loop liquid cooler to keep the two overclocked 7970 GHz Edition GPUs frosty. The new ROG ARES II is a limited edition card that pairs the ARES II GPU with an Asetek-based cooler and rounds out the top-end of the company’s Republic of Gamers lineup.


The card itself features two AMD Radeon 7970 GHz Edition GPUs clocked at 1050 MHz base and 1100 MHz boost, 6GB of GDDR5 memory clocked at 1650 MHz, and ASUS’ DIGI+ 20-phase VRM with “Super Alloy Power” hardware. The ROG ARES II has a 500W TDP and uses three 8-pin PCI-E power connectors. The card measures 11.8” x 5.5” x1.8,” not including the radiator.

The ROG ARES II includes one DVI-I, one DVI-D, and four DisplayPort video outputs. ASUS is also packing a DVI to HDMI adapter in the box.


The sealed loop water cooler is where the card sets itself apart, however. Based on an Asetek design, the ARES II water cooler features a 120mm radiator, and two CPU-style water blocks over each 7970 GHz Edition GPU. The loop runs from the radiator and through both water blocks before returning to the radiator which is paired with two 120mm fans. Curiously, the water cooler did not result in a single-slot design. Rather, the ARES II card has a somewhat-bulky two slot profile. According to ASUS, the water cooled card will run up to 31 degrees Celsius cooler than the reference NVIDIA GTX 690 graphics card while being as much as 13% faster (though ASUS does not specifically name the games/benchmarks).


ASUS has not released any pricing or availability information, but you can expect it to rival the price of PowerColor’s Devil 13 thanks to the sealed loop water cooler and ARES II hardware. Currently, ASUS is planning on producing a mere 1,000 liquid cooled ARES II cards, so be prepared to be fast on the mouse click upon release.


I would have liked to see a water cooler that was a bit more customized to the card. In particular, I think ASUS should have used a single water block that covered both GPUS and the VRM area, which would have allowed ASUS to get rid of the fan on the card itself entirely. Nevertheless, the ARES II will be extremely fast, and hopefully run nice and cool even when overclocked. I’m interested in seeing a head-to-head between the ARES II and PowerColor Devil 13.

Read more about AMD’s Graphics Core Next architecture at PC Perspective.

Source: Asus
Manufacturer: Corsair

Introduction and Technical Specifications



Hydro Series™ H100i Extreme Performance CPU Cooler
Courtesy of Corsair


Hydro Series™ H80i High Performance Liquid CPU Cooler
Courtesy of Corsair


Hydro Series™ H60 High Performance Liquid CPU Cooler
Courtesy of Corsair

The Corsair Hydro Series™ CPU water coolers come in a variety of sizes and configurations to fit the needs of all classes of computer enthusiasts. We decided to look at their latest revisions of these coolers, embodied in the H60, H80i, and H100i cooling units. We put these units up against the Swiftech Apogee HD custom cooling system on our test bench to see just how well these coolers performed. Starting at a base price of $79.99 for the Corsair H60 cooler, you really can't go wrong with the any of these standalone units.

Continue reading our review of the new Corsair Hydro Series CPU Coolers!!

AMD's retail Bulldozer watercooler

Subject: Cases and Cooling | November 7, 2011 - 12:17 PM |
Tagged: amd, bulldozer, water cooler

When the Bulldozer process first started to hit the review bench one of the most commented on facts was that AMD had plans to release a watercooler with some models of the FX-8150.  The basic design will be familiar to anyone who has seen a self contained watercooler, with a waterblock directly attached to a radiator.  In this case you can use two 120mm fans to move air over the radiator, which might be a good thing considering the small diameter tubing and questionable finish on the waterblock.  Neoseeker shows of the monitoring software and the cooling prowess of this bundled watercooler in their latest review.


"In our review of the AMD FX-8150 last month, we noted that AMD would at some point begin bundling the new Bulldozer CPU with a stock water cooler with the promise of opening the doors to even better overclocking performance for enthusiasts. We've at last got our hands on the model which will come included with the FX-8150 in the near future, and we put it to the test in our updated coverage for the FX-8150 CPU. Find out just how large the additional overclocking headroom becomes with the upcoming stock water cooler."

Here are some more Cases & Cooling reviews from around the web:



Source: Neoseeker