ARM TechCon 2013: Altera To Produce ARMv8 Chips on Intel 14nm Fabs

Subject: Processors, Mobile | October 29, 2013 - 12:24 PM |
Tagged: techcon, Intel, arm techcon, arm, Altera, 14nm

In February of this year Intel and Altera announced that they would be partnering to build Altera FPGAs using the upcoming Intel 14nm tri-gate process technology.  The deal was important for the industry as it marked one of the first times Intel has shared its process technology with another processor company.  Seen as the company's most valuable asset, the decision to outsource work in the Intel fabrication facilities could have drastic ramifications for Intel's computing divisions and the industry as a whole.  This seems to back up the speculation that Intel is having a hard time keeping their Fabs at anywhere near 100% utilization with only in-house designs.

Today though, news is coming out that Altera is going to be included ARM-based processing cores, specifically those based on the ARMv8 64-bit architecture.  Starting in 2014 Altera's high-end Stratix 10 FPGA that uses four ARM Cortex-A53 cores will be produced by Intel fabs.

The deal may give Intel pause about its outsourcing strategy. To date the chip giant has experimented with offering its leading-edge fab processes as foundry services to a handful of chip designers, Altera being one of its largest planned customers to date.

Altera believes that by combing the ARMv8 A53 cores and Intel's 14nm tri-gate transistors they will be able to provide FPGA performance that is "two times the core performance" of current high-end 28nm options.

alteraarm.JPG

While this news might upset some people internally at Intel's architecture divisions, the news couldn't be better for ARM.  Intel is universally recognized as being the process technology leader, generally a full process node ahead of the competition from TSMC and GlobalFoundries.  I already learned yesterday that many of ARM's partners are skipping the 20nm technology from non-Intel foundries and instead are looking towards the 14/16nm FinFET transitions coming in late 2014. 

ARM has been working with essentially every major foundry in the business EXCEPT Intel and many viewed Intel's chances of taking over the mobile/tablet/phone space as dependent on its process technology advantage.  But if Intel continues to open up its facilities to the highest bidders, even if those customers are building ARM-based designs, then it could drastically improve the outlook for ARM's many partners.

UPDATE (7:57pm): After further talks with various parties there are a few clarifications that I wanted to make sure were added to our story.  First, Altera's FPGAs are primarly focused on the markets of communication, industrial, military, etc.  They are not really used as application processors and thus are not going to directly compete with Intel's processors in the phone/tablet space.  It remains to be seen if Intel will open its foundries to a directly competing product but for now this announcement regarding the upcoming Stratix 10 FPGA on Intel's 14nm tri-gate is an interesting progression.

Source: EETimes
Author:
Manufacturer: ARM

ARM is Serious About Graphics

Ask most computer users from 10 years ago who ARM is, and very few would give the correct answer.  Some well informed people might mention “Intel” and “StrongARM” or “XScale”, but ARM remained a shadowy presence until we saw the rise of the Smartphone.  Since then, ARM has built up their brand, much to the chagrin of companies like Intel and AMD.  Partners such as Samsung, Apple, Qualcomm, MediaTek, Rockchip, and NVIDIA have all worked with ARM to produce chips based on the ARMv7 architecture, with Apple being the first to release the first ARMv8 (64 bit) SOCs.  The multitude of ARM architectures are likely the most shipped chips in the world, going from very basic processors to the very latest Apple A7 SOC.

t700_01.jpg

The ARMv7 and ARMv8 architectures are very power efficient, yet provide enough performance to handle the vast majority of tasks utilized on smartphones and tablets (as well as a handful of laptops).  With the growth of visual computing, ARM also dedicated itself towards designing competent graphics portions of their chips.  The Mali architecture is aimed at being an affordable option for those without access to their own graphics design groups (NVIDIA, Qualcomm), but competitive with others that are willing to license their IP out (Imagination Technologies).

ARM was in fact one of the first to license out the very latest graphics technology to partners in the form of the Mali-T600 series of products.  These modules were among the first to support OpenGL ES 3.0 (compatible with 2.0 and 1.1) and DirectX 11.  The T600 architecture is very comparable to Imagination Technologies’ Series 6 and the Qualcomm Adreno 300 series of products.  Currently NVIDIA does not have a unified mobile architecture in production that supports OpenGL ES 3.0/DX11, but they are adapting the Kepler architecture to mobile and will be licensing it to interested parties.  Qualcomm does not license out Adreno after buying that group from AMD (Adreno is an anagram of Radeon).

Click to read the entire article here!

ARM TechCon 2013 Will Showcase the Internet of Things

Subject: Processors, Mobile, Shows and Expos | October 26, 2013 - 11:13 AM |
Tagged: techcon, iot, internet of things, arm

This year at the Santa Clara Convention Center ARM will host TechCon, a gathering of partners, customers, and engineers with the goal of collaboration and connection.  While I will attending as an outside observer to see what this collection of innovators is creating, there will be sessions and tracks for chip designers, system implementation engineers and software developers.

techcon1.jpg

Areas of interest will include consumer products, enterprise products and of course, the Internet of Things, the latest terminology for a completely connected infrastructure of devices.  ARM has designed tracks for interested parties in chip design, data security, mobile, networking, server, software and quite a few more. 

Of direct interest to PC Perspective and our readers will be the continued release of information about the Cortex-A12, the upcoming mainstream processor core from ARM that will address the smartphone and tablet markets.  We will also get some time with ARM engineers to talk about the coming migration of the market to 64-bit.  Because of the release of the Apple A7 SoC that integrated 64-bit and ARMv8 architecture earlier this year, it is definitely going to be the most extensively discussed topic. If you have specific questions you'd like us to bring to the folks at ARM, as well as its partners, please leave me a note in the comments below and I'll be sure it is addressed!

Cortex-A12_600px.png

I am also hearing some rumblings of a new ARM developed Mali graphics product that will increase efficiency and support newer graphics APIs as well. 

Even if you cannot attend the event in Santa Clara, you should definitely pay attention for the news and products that are announced and shown at ARM TechCon as they are going to be a critical part of the mobile ecosystem in the near, and distant, future.  As a first time attendee myself, I am incredibly excited about what we'll find and learn next week!