Subject: General Tech | February 11, 2013 - 03:57 PM | Josh Walrath
Tagged: streaming, Simple Audio, Roomplayer, networking, corsair, audio
Corsair sure does like to expand upon their product base. The company was founded in 1994 and produced only memory for quite a few years. The past five years have seen tremendous growth from the company in terms of SSDs, cases, power supplies, and high end cooling solutions. Corsair also dabbled in sound with a line of successful speakers (though these have not been updated in some time). Corsair is again making another move, but this time with an aime to deliver content around the entire house.
The front of the Roomplayer II is rather bland, but it should hide itself well in nearly any decor.
Simple Audio is a Scottish based company (if it isn't Scottish it's crap!) that designs and sells multimedia streaming solutions. The hardware is the Roomplayer 1 and Roomplayer II units which are high definition media players that are either amplified (forconnecting directly to speakers) or non-amplified to connect to current stereo and home theater systems. Audio is broadcast to these units from iOS enabled devices or PC and Mac computers via software provided by Simple Audio.
Corsair has acquired Simple Audio in a multi-million dollar transaction, but we do not have exact numbers due to Corsair being a privately owned company. From my understanding these products will still carry the Simple Audio name, but Corsair will be the parent company and will distribute the products throughout Asia and North America (two areas that Simple Audio currently does not support).
The back of the Roomplayer I is much more interesting as it has a 50 watt amplifier built-in so it can power speakers independently.
The Roomplayer solutions are apparently quite easy to hook up and their output is very clean (supports up to 24 bit sound natively). As the average consumer is becoming more and more comfortable with setting up a home network, this is an opportunity for both Corsair and Simple Audio to market these products in new regions where overall market penetration of networked home audio is still quite low.
Corsair is a very, very aggressive company when it comes to entering new markets. Their power supplies and cases are perfect examples of how they tend to do business. Corsair actually produces neither of those product lines, but instead relies on contract manufacturing to handle production. What Corsair certainly appears to do well is specify these components very well and handle end product quality control. There really are few overall complaints about Corsair and their products, and as a consumer I do hope that they have another good one on their hands.
The sales numbers will of course be key, and obviously Corsair feels comfortable enough with Simple Audio and their products to buy them up. We are not certain when we expect to see the Simple Audio products on store shelves, but Corsair typically does not screw around.
Now we only have to wonder, "Who is next on Corsair's radar?"
Windows Media Center Add-ons and Plugins – Page 1
Missed any installments of our Cutting the Cord Series? Catch up on them here:
- Cutting the Cord Part 1: The Assessment
- Cutting the Cord Part 2: Building your HTPC – The Hardware
- Cutting the Cord Part 3: Building your HTPC – OS Install and Tuning
- Cutting the Cord Part 4: Building your HTPC – Installing and Configuring Windows Media Center
- Cutting the Cord Part 5: Wrap up - Media Center Add-ons and Options
Now that we have our Windows Media Center up and running, we can investigate a few additional add-ons and plugins that can further improve upon the experience you can get from your Media Center. In addition to discussing some great add-ons, I’m going to discuss how well our HTPC build has done with our power efficiency goals, so without further ado let’s jump right into it!
My Experience: The add-ons and plug-ins that I’m going to walk through are by no means all that’s out there. There are tons of add-ons that will add anything from Local Weather to full overlays for your movie collection. One thing to keep in mind is that any add-on or plugin can completely bork up your Media Center. Always test the add-on on another box first, or even better, do a full image/backup of your Media Center before you try any new add-on or plugin. You do have a full image of your brand new Media Center build on another machine that you can re-image yourHTPC with right? (Check out Clonezilla or Acronis True Image if not…)
Windows Media Center Add-ons and Plugins
Windows Media Center is excellent right out of the box, but there are a few add-ons and plugins I like to add to our Media Center to give us some additional functionality and increased usability. By a wide margin, the one we use the most is Netflix.
Back when Netflix was a scrappy newcomer, trying to get subscribers, they were putting their client on every device and platform that would talk to them. They worked out a deal with Microsoft to have the Netflix client pre-installed right into Windows Media Center menu.
My Experience: The built in application was apparently a joint project between Microsoft and Netflix, which may seem great, but has actually turned out to be a quagmire of finger pointing. Since it was originally released, the application has not been updated since and both companies have washed their hands of it and point to the other as being responsible for the application. The UI badly needs a facelift, in particular with the way you navigate through titles that have multiple seasons. While all seasons of the title will show up as a single entry in your Instant Queue, there is no way to easily jump from season to season and the only way to navigate episodes is to pull up episode lists that starts at Season 1, Episode 1, every time you open up the episode list. While this may not seem like a big deal, if you watch a show with a lot of episodes (like Cheers with 11 Seasons and 275 episodes) you have to scroll past every single prior episode to get to the next one you want to watch. Clicking the down arrow on your remote over 200 times to get to the next episode you want to watch not only gets old real fast, but eats batteries like mad.
Episode list problems aside, we still use Netflix on a daily basis and it’s relatively easy to setup. First, scroll up to the “Movies” line and select the Netflix tile.
You’ll be greeted with a full Netflix splash screen. Put a check in the “I have read and understand the Terms of Service and Privacy Statement” checkbox which will then activate the “Install” button. Click on Install and off we go.
Subject: Editorial, General Tech, Graphics Cards, Motherboards, Cases and Cooling, Processors, Memory, Systems, Storage, Mobile, Shows and Expos | August 9, 2012 - 10:30 PM | Ryan Shrout
Tagged: video, workshop, streaming, quakecon, prizes, live, giveaways
It is that time of year again: another installment of the PC Perspective Hardware Workshop! Once again we will be presenting on the main stage at Quakecon 2012 being held in Dallas, TX August 2-5th.
Main Stage - Quakecon 2012
Saturday, August 4th, 2pm CT
Our thanks go out to the organizers of Quakecon for allowing us and our partners to put together a show that we are proud of every year. We love giving back to the community of enthusiasts and gamers that drive us to do what we do! Get ready for 2 hours of prizes, games and raffles and the chances are pretty good that you'll take something out with you - really, they are pretty good!
Our thanks for this year's workshop logo goes to John Pastor!!
Our primary partners at the event are those that threw in for our ability to host the workshop at Quakecon and for the hundreds of shirts we have ready to toss out! Our thanks to NVIDIA, MSI Computer and Corsair!!
If you can't make it to the workshop - don't worry! You can still watch the workshop live on our page right here as we stream it over one of several online services. Just remember this URL: http://pcper.com/workshop and you will find your way!
Case Mod Competition
Along with the Hardware Workshop, PC Perspective is working with Modders Inc on the annual case mod contest! There are two categories for the competition: "Scratch Built" and "In the Box" that will allow those that build their computer enclosures from the ground up to compete separately from those that heavily modify their existing cases and systems.
For more details, be sure to check out the on going thread at the Modders Inc Forums!
Prize List (will continue to grow!)
Subject: General Tech | July 4, 2012 - 11:39 PM | Tim Verry
Tagged: streaming, Raspberry Pi, nexus q, media, google, android transporter, Android
Last week at Google I/O 2012, the company announced a new high-end media streaming device that taps into the Google Play cloud to bring music, movies, and TV shows to your living room television. Launched as the Nexus Q, the Android-powered sphere connects to the internet and multiple Android phones to bring a social media sharing aspect to the big screen, for a hefty $299 price tag (available from the Google Play Store).
Granted, it does contain a high end built-in amplifier for connecting to bookshelf speakers – at 12.5 watts per channel – and is made in the United States. Even so, that’s a high price to pay for a media streaming box, and especially one that can only play media from Google Play and not any locally stored content.
Enter the Raspberry Pi, the small Linux-powered $35 computer that is still not easy to get a hold of (at least not with my luck!). Coupled with a piece of new software developed by E.S.R. Labs called Android Transporter, the Raspberry Pi can wirelessly stream media and more from your Android devices to your TV screen for a much lower price.
There are some caveats, however if you are just after the wireless streaming aspects the Raspberry Pi has you covered. The Nexus Q, on the other hand, further brings in a social interface that allows friends to pool their Google Play content and build a playlist. It also has a very nice case with touchscreen controls and LEDs. The Nexus Q also offers an analog amplifier for speakers and optical audio outputs as well as regular HDMI. The Raspberry Pi only has HDMI for high-quality digital audio. Neither device supports HDMI pass through for connecting it between your audio kit and/or HDMI switcher and the TV though.
The Android Transporter software also has a noticeable bit of lag, which isn't really a problem for watching movies or streaming music but may make using the phone as a gaming controller as E.S.R proposed difficult. According to Bit-Tech, the developers are working on reducing latency from the current 150ms to less than 100ms.
To me, this seems like a good compromise between the cool wireless streaming technology (I can never find that darn MHL adapter when I need it!) and the $299 Nexus Q hardware. For the cost of a Raspberry Pi, you can get wireless streaming and screen sharing as well as the ability to stream local content as well as streamed-from-the-internet media. That gets you most of the way to the Nexus Q (while adding local content!) for about an eighth of the cost! I will concede that the Nexus Q's hardware is a lot sleeker looking that that of the Raspberry Pi!
As soon as I get my Pi, I'm definitely going to try this out! Have you gotten your hands on a Raspberry Pi yet? Are you using it as a cheap HTPC/streaming box?
You can find all of our Raspberry Pi coverage on the site by searching for the "Raspberry Pi" tag.
Subject: General Tech | June 3, 2012 - 03:20 AM | Tim Verry
Tagged: streaming, Hawken, gaming, gaikai
Mech Shooter Hawken will launch on December 12th, 2012 but streaming gaming service Gaikai has made a deal with Meteor Entertainment to allow gamers to play the game before launch to demonstrate its playability through its streaming service using NVIDIA’s GRID cloud gaming technology.
According to gaming website Joystiq, Gaikai has signed a deal with publisher Meteor Entertainment to allow gamers to test out the mech shooter PC game running on Gaikai's streaming service ahead of the game’s official release on 12/12/12. First demonstrated at GTC 2012, the free-to-play game uses NVIDIA’s GRID technology to reduce latency on the server and client sides.
A video of the NVIDIA demonstration.
Mark Long, CEO of Meteor Entertainment stated that "HAWKEN wants to be free and it wants to be everywhere - and with Gaikai, it will be.” The game has proved quite popular and has hundreds of thousands of gamers signing up for the closed beta. The free-to-play game is returning to a PC gaming classic with mech fighting and if Gaikai is able to deliver it will be a game that will be accessible to all kinds of devices from tablets to high powered gaming PCs.
That last bit is the real question though, and one that many gamers have on their minds. Gaikai is offering up the game pre-release to prove itself as a viable platform, and that is going to be a make it or break it situation. Here’s hoping that the NVIDIA GRID technology delivers and results in a playable game with real world performance benefits. While they have not set an exact date for when it will go live, gamers will be able to access it via the playhawken.com website. Will you be checking out Hawken streaming for yourself?
Subject: General Tech | January 10, 2012 - 04:03 AM | Tim Verry
Tagged: CES, sony, bloggie, bloggie live, camera, camcorder, streaming, qik
Among the Crystal LED televisions Sony had a small pocket camera on display, the Sony Bloggie Live. The successor to the original Bloggie, the stylish camera fits in your pocket and somewhat resembles a smartphone in design.
The Bloggie Live features 8 GB of internal storage space, a 3" touch screen LCD, and a water resistant exterior. The ExmorCMOS sensor is capable of recording 1080p or 720p video, and the Wi-Fi radio is able to upload photos and videos to the various sharing services including Facebook, YouTube, Dailymotion, Flickr, and Picassa. The Bloggie Live has an LED flash and a stereo microphone. In addition to video, the camera is able to take 12.8 megapixel still photos. In addition, the camera is able to stream video to the internet over Wi-Fi using the Qik streaming service. Using the PlayMemories application, users are also able to wirelessly transfer files from the Bloggie Live to a smartphone.
Alternatively, Sony also showed off the Bloggie Sport, with is a bit smaller than the Bloggie Live and is waterproof up to 16 feet of water. This camera features 4 GB of internal memory, and is capable of shooting HD MP4 video and 5 megapixel still shots. An "Underwater Mode" further adjusts the white balance automatically.
The Bloggie Live is available for purchase immediately for $250 USD while the Bloggie Sport will cost $180 and will be available in February. The price tag is a bit steep considering the storage is not expandable and there is no external mic jack. Still, aesthetics wise, the new pocket camcorder looks slick.
PC Perspective's CES 2012 coverage is sponsored by MSI Computer.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | January 8, 2012 - 09:42 PM | Tim Verry
Tagged: sync, streaming, cloud, CES, acer
Last summer Acer purchased a cloud-service company for $325 million, and now that we are at CES the reason for the acquisition is apparent. According to Cnet, Acer is launching a new cloud service. Dubbed the "AcerCloud," the new service allows users to stream and sync files between Windows computers and Android mobile devices. Acer Chairman J. T. Wang stated that the company is "determined to make it very successful and sustainable."
The new cloud service will launch with three applications to facilitate streaming and syncing photos, music, videos, and documents. These apps are named Clear.fi Photo, Clear.fi Media, and AcerCloud Docs. The company is going to integrate the cloud streaming service with their ultrabook lineup. AcerCloud is only the first of many cloud streaming services to emerge recently. Amazon Cloud Drive Service, Google Music, and Apple's iCloud are just a few of the popular streaming services that Acer has to compete with. That's before taking into account syncing services like Dropbox, Sugar Sync, and SpiderOak among others. Needless to say, the AcerCloud is going to have quite a bit of competition to contend with. Whether their proprietary cloud can carve a niche into the market filled with platform agnostic alternatives remains to be seen; however, competition is a good thing and Acer is likely not (going to be) the last company to launch a cloud service of its own this year.
Do you use any of the streaming and/or syncing services? What would it take to give Acer's solution a try?
PC Perspective's CES 2012 coverage is sponsored by MSI Computer.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Systems | January 5, 2012 - 02:23 PM | Jeremy Hellstrom
Tagged: htpc, Hauppauge, colossus, streaming, capture
Missing Remote have assembled an impressive guide on how to use a Hauppauge Colossus to capture any media you can stream to your HTPC. Hulu, YouTube, Netflix or anything else, this guide will show you how to capture streaming media so you can watch it again at your leisure. Apart from the hardware you will need Arcsoft ShowBiz and likely an RDP hack which they provide for you to use. Read on to see the trick as well as their recommended audio and video capture settings as well as tips on playback.
"So we've all probably experienced the case where, for some reason, our DVR misses an episode and we have to find it via another mechanism. Sure, you can watch it on Hulu or Amazon VOD, but you want to add it to your collection without the DRM (exactly how the DVR would have done), and it came over the air/cable for free (or you paid your cable bill) - so why should you have to pay for it again?! Maybe you've had one too many nasty-grams from Comcast about your bit-torrent downloads so you don't want to go that route."
Here are some more Systems articles from around the web:
- Boxee Box By D-Link Review @ HardwareHeaven
- Elgato EyeTV NetStream DTT Network Dual Tuner Review @ Real World Labs
- TRENDnet 450Mbps Dual Band Wireless N HD Media Bridge Review @ Madshrimps
- SilverStone Grandia Series GD06 HTPC Chassis @ Tweaktown
- Streacom FC5 Silent HTPC Chassis Review @ MissingRemote
- Silverstone Grandia Series GD06 HTPC Case Review @ eTeknix
- Dell Inspiron One 2320 Review @ TechReviewSource
- Asrock Vision 3D 252B @ Legion Hardware
Subject: General Tech | July 12, 2011 - 08:05 PM | Tim Verry
Tagged: Netflix, streaming, ip
Today, Netflix announced significant changes to the movie rental service’s pricing structure in addition to a new DVD only plan. Representing their lowest price ver for unlimited DVD’s they have announced a new $7.99 a month plan for 1 DVD out at a time and $11.99 per month for 2 DVDs at a time. Netflix is further changing up the way DVD plus streaming plans work. Specifically, they are changing their plans into separate DVD only and streaming only plans. Customers would then further be able to add a streaming plan on top of the DVD plan to their account.
The unlimited streaming only plan will be priced at $7.99 a month while the unlimited DVD only plan will also be priced at $7.99 a month. Thus, the price of the lowest cost DVD and streaming monthly price will be $15 USD. The new prices are effective immediately for any new members while existing members will be subject to the price increases starting September 1, 2011.
Netflix claims that they have changed the prices in response to the realization that DVDs still have a long life and the previous model of $2 add on to the streaming plan for 1 DVD out at a time was not making them enough money cost effective. On one hand, customers are up in arms regarding the price increase for the same service they have been paying to for years, and on the other hand the price increase may allow Netflix to update its streaming catalog more frequently with new content. Regardless of the semantics, it is certainly a bold move by the company and it will be interesting to see how its customers react.
What are your thoughts on the pricing changes?