Subject: General Tech, Shows and Expos | June 17, 2015 - 10:24 PM | Scott Michaud
Tagged: xbox one, xbox, Steam Controller, microsoft, E3 2015, E3 15, E3, controller
And, of course, Xbox One... but I can assume who is the bulk of my audience.
Microsoft announced the Xbox One Elite Controller at E3, which includes support for Windows 10. This is part of their initiative to amend relations with the PC gaming industry. They seem to be going about it by focusing on the high-end gamer first. If not, then I wonder why they chose a $150 controller as a leading product.
At that price, you could literally purchase three Steam Controllers from Valve instead of a single one of these, but whether you should... depends. In all honesty, I might end up purchasing both and doing a comparison between them over a variety of games. Of course, my primary input device is the mouse and keyboard for most games, but I occasionally add an early model Xbox 360 wired controller to the mix for Saint's Row, Grand Theft Auto, NASCAR 2003, and a few other titles.
The real disappointment is its D-Pad, though. It just cannot reliably send a single direction without sometimes accidentally sending others. This gets worse in games that are styled in the “8-bit” and “16-bit” era. I actually need to play most of those on a keyboard, which is a terrible experience. Valve's implementation looks interesting with the cross-shaped thumbpad, but Microsoft's new version has options: an old-fashioned cross as well as a nine-sectioned cup, called a “faceted D-pad”.
That leads into the main design of Microsoft's controller: customization. Two switches on the back of the controller allow the range of trigger motion to be limited on the fly. This is designed for games like Grand Theft Auto, where the player wants precise control over throttle and brake, but would prefer to rapidly max-out the trigger as fast as possible when shooting a weapon. With this controller, you flip the switch when you leave the car and, what normally would be some fraction of its range, would be considered “bottoming out” and it would apparently even physically stop the trigger from pushing in further. According to the website, the threshold is user-customizable. I did not use it personally because I wasn't at E3.
Like Valve's controller, it has optional rear paddles near the grips. They are stainless steel apparently, and can be used to compensate for weird button combinations by mapping them to fingers that normally just clutch the device itself. In Valve's version, there is just two while Microsoft's allows for up to four. Microsoft also allows you to detach them, rather than just disable them.
This is when we get to software customization. Valve claims that the Steam Controller can be bound to many events across mouse, keyboard, and gamepad buttons and axises. Microsoft, on the other hand, seems to be keeping within the range of buttons found on a standard Xbox One controller. This is concerning to me because it means that extended inputs will be redundant, which is fine for an Xbox One game but could be annoying for a PC title that has many independent, simpler commands. This might be a limitation of XINPUT, which supposedly cannot address more than 10 buttons. I thought I remembered that limit being extended, but that seems to be true even in the MSDN documentation. Even still, the driver could address the extra functions as a secondary virtual device (keyboards, etc.) but Microsoft doesn't seem to want to. As a final note, Valve also allows the end of both triggers to be considered a clicky button, while Microsoft just recognizes it as a bottomed-out axis.
The Xbox One Elite Controller will ship in October for $149.99. A wireless adapter for the PC will not be required if you use the included USB Micro cable, but add that to the price if you want it wireless. Add batteries on top of that, because it takes AA. They include a pair of disposable AA, but that is obviously not a permanent solution.
Subject: General Tech | June 11, 2015 - 12:15 PM | Ken Addison
Tagged: Z97-Pro Gamer, video, valve, tonga, Steam Controller, Seiki Pro, seiki, r9 390x, podcast, MasterCase, hawaii, Fiji, coolermaster, computex, amd, 4k
PC Perspective Podcast #353 - 06/11/2015
Join us this week as we discuss the Seiki Pro 4k Display, More News from Computex, and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano
Program length: 1:16:25
Subject: General Tech, Systems | June 5, 2015 - 04:22 PM | Scott Michaud
Tagged: valve, steam link, Steam Controller, steam
So, if a company says “a limited quantity of orders will be shipped on October 16th, weeks in advance of our official launch”... does that mean October 16th is its release date? What about its official launch date of November 10th? Also, why am I trying to make sense of time when the subject is Valve?
Either way, the new Steam Controller has been put up for pre-order and given a release date. The input device will sell for $50 USD, $59.99 CDN, or £40 GBP depending obviously on where you are. It also has a finalized design that is very similar to the Xbox layout, with thumbpads replacing the d-pad and right analog stick. Going to the device's Steam page will send you to a gaming retailer to make the pre-order (wat???). I get EB Games, because I'm Canadian, while Americans get GameStop, which is the same company anyway.
Unlike previous Steam Controller designs, the left thumbpad is shaped like a cross, which I would like to see used as a d-pad because most PC controllers that I've used are either terrible at it, or are horrible at everything else. The video also uses the left thumbpad as a scroll mechanism, but I wonder what other functionality Valve allows because I have yet to find a single mouse driver that can do everything. For instance, Razer's is unable to record mouse scroll (up, down, left, or right) events in macros.
The rear of the controller is very interesting. The main trigger is analog up to the end, which is a tactile switch. These can be bound to independent actions, although you will obviously need to have the maximum analog command play well with the click command. The given possibility is for first person shooters where you use the analog part to bring up your iron sights while you fire with the click. I could also imagine a racing game where the throttle is analog and clicking at the end activates a boost. There are also buttons in the grips for your ring and pink finger to activate. It also looks like there's shoulder buttons above the triggers, but I can't quite tell. This would basically yield six shoulder buttons, along with all of the face inputs, which is about the max that I could imagine.
The official launch is November 10th, but a pre-release run is shipping on October 16th. The Steam Link is supposedly also available at the same time for the same price, which is basically a streaming target for Steam on the TV.
Subject: General Tech | March 6, 2015 - 01:54 AM | Tim Verry
Tagged: valve, Steam Controller, peripheral, gdc 2015, gdc 15, gaming, controller
Valve has given the elusive (vaporous? heh, I'll leave the good puns to Scott) Steam Controller a release date and several refinements to the design. Slated for a November 2015 launch, the Steam Controller will ship with most of the Steam Machines offered by OEMs. Users will also be able to purchase controllers directly from Valve (via Steam) for $49.99.
The final controller features a curved design with lots of rounded edges (no sharp angles here), large handles and dual circular programmable trackpads. The four button d-pad has been replaced by an analog stick while the four A, B, X, and Y buttons sit where a second thumb stick traditionally resides.
A circular Steam button and two smaller buttons finish out the face controls.
The two large (and despite my impressions from photos apparently ergonomic) handles each host two dual stage (analog and/or digital) triggers on the top and a button on the underside of the controller.
The Steam Controller is powered by two replaceable AA batteries and is wireless.
Users will be able to create and save custom configurations to their Steam profiles as well as share those custom settings with other Steam users. This should make adoption a bit easier since you will be able to jump into games with a recommended configuration that other users report works well. Or at least it will be a better starting point for your own custom settings rather than being thrown to the wolves with a new and unfamiliar controller. I think it is going to take practice to get good at this even with the jumpstart on suggested configurations though.
It will be available in November (Steam Store page link) for $49.99 which is just cheap enough that I will likely pick one up just to try it out and see what the hype is about. If it is as comfortable as some writers (who have gotten hands on time with them at GDC) are claiming, I’m willing to give it a shot now that it includes a thumb stick (I think I need to be eased into this dual trackpad setup).
Engadget has several more photos from the GDC show floor that are worth checking out.
What do you think about the final Steam Controller?
Subject: General Tech, Mobile, Shows and Expos | June 15, 2014 - 01:51 AM | Scott Michaud
Tagged: x86, SteamOS, Steam Machine, Steam Controller, steam, mobile, handheld, E3 14, E3
To be doubly clear, if the title was not explicit enough, this announcement is not made by Valve. This company is called, "SteamBoy Machine team". If not a hoax, this is one of the many Steam Machines which are expected to come out of the SteamOS initiative. Rather than taking the platform to a desktop or home theater PC (HTPC) form-factor, this company wants to target the handheld PC gaming market.
If it comes out, that is a clever use of SteamOS. I can see Big Picture Mode being just as useful on a small screen as it is on a TV, especially with its large font and controller navigation. The teasers suggest that it will use the haptic feedback-based touchpads which Valve are expected to base the Steam Controller on. It will also include a 5-inch touchscreen.
The Escapist got into contact with the team and received a few more specs:
- Quad-Core CPU (x86)
- 4GB RAM
- 32GB built-in storage
Even if this company does not make good on their expectations, companies will now be considering portable SteamOS devices. This is the sort of outside-the-box thinking that Valve was pushing for when they wanted to create an open platform. Each party will struggle to win in their personal goals, yet they can also rely on the crowd (other companies or individuals) to keep up in areas where they do not want an edge.
Philosophy aside, the company is targeting 2015 with a "Standard Edition" supporting WiFi and 3G. It would make sense to have a WiFi-only model, but who knows.
Subject: General Tech | April 11, 2014 - 03:37 PM | Jeremy Hellstrom
Tagged: valve, Steam Controller, gdc 14
At the Game Developers Conference last month The Tech Report had some one on one time with the Steam Controller and walked away with a less than positive impression. It would seem that the learning curve for this device is rather steep, especially when they tried Portal 2. Fine aiming, circle strafing and other tasks which come naturally to those used to a keyboard and mouse were quite difficult to accomplish on the new controller. When asked, the Valve rep admitted it took them about 8 hours to familiarize themselves with the Steam Controller. Is that too steep a learning curve or is it simply part of the fun of playing with a new type of console and controller?
"Valve's Steam controller looks great on paper. It promises not just greater accuracy than conventional console gamepads, but also support for point-and-click titles that traditionally required a mouse and keyboard. There's a downside, though. As TR's Cyril Kowaliski learned first-hand, the Steam controller has a pretty steep learning curve—steep enough, perhaps, to put off some potential converts."
Here is some more Tech News from around the web:
- Cheat Win XP DEATH: Little-known tool to save you from the XPocalypse @ The Register
- Microsoft kills off Windows XP with side-scrolling shoot-em-up @ The Inquirer
- Pocket-sized robotic mobile printer debuts on Kickstarter @ The Inqurier
- Hacking Your Linux Keyboard with xkb @ Linux.com
- BlackBerry not afraid to throw its mobe biz under a bus, says CEO Chen @ The Register
- Google Chrome 64-bit @ NGOHQ
Subject: General Tech, Cases and Cooling, Shows and Expos | March 15, 2014 - 01:44 AM | Scott Michaud
Tagged: GDC, gdc 14, valve, Steam Controller
Two months ago, Valve presented a new prototype of their Steam Controller with a significantly changed button layout. While the overall shape and two thumbpads remained constant, the touchscreen disappeared and the face buttons more closely resembled something from an Xbox or PlayStation. Another prototype image has been released, ahead of GDC, without many changes.
Valve is still in the iteration process for its controller, however. Ten controllers will be available at GDC, each handmade. This version has been tested internally for some undisclosed amount of time, but this will be the first time that others will give their feedback since the design that was shown at CES. The big unknown is: to what level are they going to respond to feedback? Are we at the stage where it is about button sizing? Or, will it change radically - like to a two-slice toaster case with buttons inside the slots.
GDC is taking place March 17th through the 21st. The expo floor opens on the 19th.
Subject: General Tech, Cases and Cooling, Shows and Expos | January 16, 2014 - 03:19 AM | Scott Michaud
Tagged: valve, Steam Dev Days, Steam Controller, CES 2014, CES
Valve has always been a company based on experimentation and it looks like the Steam Controller is not the lighthouse which guides SteamOS through the fog. Just a week after presenting the prototype at CES, a 3D mockup of a new one makes not-insignificant changes. Gone is the touchscreen and the first revealed button placement. Frankly, just about the only things untouched on the front face are the twin touchpads and the palm grips.
Image Credit: Leszek Godlewski (Twitter)
To fully understand the breadth of the changes, the announcement image is included below. There is basically no discussion about the back so that aspect might be untouched.
The changes were apparently made to assist compatibility with games ported from more traditional input schemes. Looking at the original prototype, there was no obvious mapping from a Sony or Microsoft-based controller to those buttons spread out for both the left and right thumbs to access. The new setup is the typical four face buttons on the right and four more buttons on the left as a surrogate directional pad. If they continue to iterate down this path I hope that the directional pad is more effective than most from the last two generations. It looks like the four directions are separated from one another which does not inspire confidence.
There are two stories which entangle on this one. The first is that Valve is willing to perform rapid iteration until they achieve what they consider a maximum. That is the method to quickest success especially since it allows cross-pollination between designs.
The second is that it also makes the public a little bit nervous.
Subject: General Tech, Shows and Expos | January 9, 2014 - 02:21 AM | Scott Michaud
Tagged: CES 2014, CES, valve, Steam Controller
Valve has garnered a lot of hype leading up to this CES. This event was the launch of Steam Machines from their OEM partners. The line-up for their keynote speech was intense, Ryan tweeting in the crowd a whole half of an hour before the speech. Finally, at 7:59 pm EST, Gabe begun to speak... and taking questions by 8:02. Included below is a dramatization of the event.
Yes, I know, "Simpsons did it..."
... South Park probably did it too.
As previously reported, thirteen OEM designs were presented and available to discuss their product. Steam controllers came up during the question period and brought out a pretty big detail: while Valve will be making the Steam Controller, other manufacturers will be allowed to make their own. Currently release date and expected price are still unknown.
Some journalists actually got their hands on the official Steam Controller and they, naturally, shared their thoughts. Kyle Orland of Ars Technica was one of them and his opinion was quite literally split down the middle. On the one hand, pun fully intended, aiming felt about as comfortable and effective as a mouse. On the other hand, movement in legacy mode was aggravating without any tactile feedback signaling where any of the eight directions (up, down, left, right, and the diagonals) start and end.
Again, this opinion only stands for shooter-style games in "Legacy Mode". Developers can use the controller more effectively when they design their title for the actual API. Legacy mode maps controller input to mouse and keyboard events and signals.
He also had other comments (positive and negative) about the button layout and other aspects of the controller. It might be worth checking out if you keep in mind: it is early times and he only had a few minutes to base his opinion.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Systems | January 7, 2014 - 05:08 AM | Josh Walrath
Tagged: CES, steam os, Steam Machine, Steam Controller, small form factor, dual boot, Digital Storm, CES 2014, Bolt 2
Today Digital Storm has announced the Bolt 2 small form factor computer. This little number is marketed as a “Steam machine”, and for very good reasons. This particular number packs in quite a punch in a very small space.
The custom designed case has a very effective and logical layout. It really is quite small, but it is very strong and robust. It can handle a micro-ITX board, multiple drives, and a dual slot graphics card. The system I saw was decked out with a GTX 780 Ti along with the Intel i7 4770K. It includes Digital Storm’s proprietary lighting and cooling module which of course controls the lighting… and cooling fan speed for the system.
Cooling is primarily based on the Corsair H100i dual fan unit. This portion takes air from one side/top of the case (depending on orientation) and then vents it through the rest of the chassis. The graphics card takes air from the other side of the case and routes it out the back. This cooling solution allows a fair amount of overclocking to be attempted by the end user, but it does have limitations as compared to a larger system with more airflow.
The design utilizes a 700 watt power supply, which is pretty impressive considering the space constraints that Digital Storm has to deal with. A lot of work with partners has allowed them to include this very small unit with a pair of 30 mm fans at either end. One would expect such fans to produce a LOT of noise. This is happily not the case. The design is good enough, and efficient enough, that at higher loads (including overclocking) it stays very quiet.
The system is very accessible, far more than most would expect. Anyone that has worked on an older small form factor case will testify as to how annoying and contorted setting up hardware (or swapping it out) can be. Digital Storm again took their time with the design to make sure that installation and the changing of components is as simple as possible. A person armed with a screwdriver can get to any major component in a few seconds. Swapping out the video card would take the amount of time of removing four screws, unplugging the power, and making sure not to rip out the PCI-E 16X ribbon connecting the card to the board.
Prices for the unit start at $1500 and go above $2500, depending on component choices. When Valve finalizes the Steam OS and has it ready for prime time, Digital Storm will be including the Steam controller with the build.
Follow all of our coverage of the show at http://pcper.com/ces!