SolidRun CuBox-i Is An ARM-Powered Mini PC Starting at $45

Subject: General Tech | September 13, 2013 - 04:15 AM |
Tagged: solidrun, SFF, Freescale, cubox-i, arm

SolidRun Ltd. Has come up with its own ARM-powered mini computer called the CuBox-i. The new PC measures 2” x 2” x 2” and has some respectable IO for its size. The CuBox-i comes in multiple flavors from $45 to $120. The cheapest version competes in many ways with the Raspberry Pi while the top-end device is more in line with Android development boards that tend to run in the hundreds of dollars.

CuBox-i.png

There are actually four SKUs in the CuBox-i series:

  1. CuBox-i1
  2. CuBox-i2
  3. CuBox-i2ultra
  4. CuBox-i4pro

The CuBox-i PCs are powered by single, dual, or quad core variant of a Freescale i.MX6 SoC at up to 1.2 GHz. The SoC uses ARMv7 instructions and dedicated NEON media encode/decode hardware. The GPU included in the SoC supports OpenGL ES 2.0 on all models, and the GPU in the two higher-end models further supports OpenCL 1.1 embedded. Memory is 512MB on the $45 CuBox-i1, 1GB on both CuBox-2 systems, and 2GB of DDR3 on the CuBox i4Pro. The mini PCs support 1080p video playback, and are compatible with Android 4.2.2, XBMC, and various Linux distributions.

IO on the CuBox-i PCs includes two powered USB 2.0 ports, HDMI, Ethernet (Gigabit on the higher end models, limited to less than 470 Mbps internally), one eSATA 3Gbps port, an optical S/PDIF output, microSD slot, microUSB (RS-232 adapter on higher end models), and an infrared reciever. The two higher-priced models also include an infrared transmitter. The high end systems also support Wi-Fi b/g/n, Bluetooth, and a hardware RTC (Real Time Clock) with backup battery.

SolidRun CuBox-i.jpg

The table above shows the breakdown of IO and internal hardware in the various SKUs. While the systems start at $45, it is the higher priced models that add some interesting features. It is always nice to see competition in the mini PC space. The CuBox-i series will be available in limited quantities later this year. Pre-order pricing breaks down as follows:

  • CuBox-i1 for $45
  • CuBox-i2 for $70
  • CuBox-2Ultra for $95
  • CuBox-4Pro for $120

Compared to the previously-announced CuBox Pro, the CuBox-i series is slightly cheaper, uses a faster SoC, and is available in multiple SKUs. For example, the top-end CuBox-i4Pro is a bit cheaper at $120 versus $160 for the CuBox Pro's original price. Naturally, the lower end CuBox-i's are even cheaper but also have less memory and IO.

Source: SolidRun

SolidRun Launches CuBox Pro Miniature Desktop Computer

Subject: Systems | January 9, 2013 - 10:36 AM |
Tagged: ubuntu, solidrun, linux, desktop, cubox pro, cubox, computer

Israeli-startup SolidRun is launching an updated model of its CuBox mini PC called the CuBox Pro. The small desktop computer measures 2 x 2 x 2-inches and weighs a mere 91 grams. The CuBox Pro is not only small in size, it also sips a mere 3 watts at full load. It comes pre-loaded with Ubuntu Linux, but the CuBox Pro can be loaded with alternative operating systems by way of a microSD card. The hardware is nothing spectacular on the performance front, but it is capable of 1080p HD video playback. Interestingly, Youtube user rabeeh3000 reported that the CuBox Pro draws less than 2.5 Watts while playing a HD movie in XBMC.

SolidRun CuBox Pro.jpg

Speaking of hardware, the CuBox Pro is powered by a Marvell ARMADA 510 SoC clocked at 800 MHz. It is supported by 2GB of DDR3 memory, and internal storage is handled by a microSD card slot.

Rear IO on the CuBox Pro includes two USB 2.0 ports, one HDMI video output, one eSATA connector, one Gigabit Ethernet port, DC power jack, and a single S/PDIF audio output on the side of the case. Further, the CuBox Pro has an infrared receiver, which will enable remotes to be used with media center software.

SolidRun CuBox Pro Computer IO.jpg

The CuBox Pro is slated to be available sometime in January for $159. Alternatively, the original CuBox with 1GB of DDR3 is available for $139. Admittedly, it is a bit pricey considering there are cheaper options like the Raspberry Pi but you are getting a complete OEM system (whereas you would have to add an SD card, USB infrared receiver, and case to the price of the Pi).

You can find more information abou the CuBox computer on the SolidRun website

Source: Venture Beat