CES 2013: ASUS Shows Off P9X79-E WS Motherboard for SB-E Processors

Subject: Motherboards | January 9, 2013 - 12:01 PM |
Tagged: workstation, usb 3.0, socket 2011, sandy bridge-e, p9x79-e, ces 2013, CES, asus

ASUS is showing off a new flagship X79 motherboard at CES called the P9X79-E WS. The workstation-class board is packed with hardware and ready to take Intel’s socket 2011-based Sandy Bridge-E processors to the extreme. The P9X79-E WS is of the E-ATX variety and features a LGA 2011 socket nestled between eight DDR3 DIMM slots. The board can support a maximum of 64GB clocked at 2400 MHz. An eight-pin CPU power and standard 24-pin ATX connector supplies power to the board while ASUS’ 10+2 phase DIGI+ VRM delivers clean power to the processor and memory.

ASUS-P9X79-E-WS.jpg

The P9X79-E WS uses the X79 PCH and features six SATA 6 Gbps ports and four SATA 3 Gbps ports. With seven total PCI-E 3.0 x16 expansion slots, the P9X79-E WS can support quad SLI or CrossfireX multi-GPU solutions.

ASUS P9X79-E WS Motherboard for Socket 2011 Processors.jpg

Rear IO on the ASUS motherboard includes the following ports:

  • 1 x combo PS/2 port
  • 7 x USB 2.0 ports
  • 2 x USB 3.0 ports (plus two additional USB 3.0 headers on the motherboard)
  • 1 x USB BIOS flash port and button
  • 2 x Gigabit Ethernet ports
  • 2 x eSATA ports
  • 6 x Analog audio ports
  • 1 x S/PDIF port
  • 1 x FireWire port

While not quite as outlandish as the Zeus and Wolverine prototype motherboards ASUS showed off at Computex, the P9X79-E WS is a high-end board that should actually see the light of day. Unfortunately, ASUS has not released any official pricing or availability for its new flagship X79 motherboard yet. WCCF Tech has several close up photos of the ASUS board worth looking at as well.

Coverage of CES 2013 is brought to you by AMD!

PC Perspective's CES 2013 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: WCCF Tech

Computex: Gigabyte Shows Off GA-X79S-UP5 WiFi Socket 2011 Motherboard (Hi-Res Photos)

Subject: Motherboards | June 5, 2012 - 08:40 PM |
Tagged: X79S-UP5 WiFi, x79, socket 2011, Intel, gigabyte, computex

Although Ivy Bridge is the new hotness, socket 2011 is still the company’s top-end enthusiast and workstation platform. And to to be forgotten, Gigabyte dedicated some space at its Computex booth to show off a new high-end X79 socket 2011 motherboard. The Gigabyte GA-X79S-UP5 WiFi is a EATX motherboard with a 2011 socket that is surrounded by heatpipes and VRM heatsinks (we recently reviewed the X79-UD5) The board further supports eight DDR3 DIMM slots, eight SAS connectors, six SATA ports, four PCI-E 3.0 x16 slots (up to 3 way SLI/CrossFireX), one PCI-E 3.0 x1 slot, and one legacy PCI slot at the bottom of the motherboard. It also has internal connectors for front panel audio, SPDIF, Firewire (1394), TPM, one USB 3.0, two USB 2.0 headers, and four fan headers (one of which is for the CPU).

IMG_3202.JPG

Integrated Gigabyte technology includes the company’s all-digital and “3D Power,” dual UEFI BIOSes, 8 phase VRM, Gigabyte Bluetooth 4.0 and WiFi card, 110dB SNR (signal-to-noise ration) HD audio, and 3X USB power and On/Off Charge to charge iPads and tablets even when the computer is powered down. Quad channel memory and socket 2011 processors give CAD engineers, video editors, and other 3D modelers the most performance possible out of a single socket workstation system.

Rear IO for the X79S-UP5 WiFi board includes a PS/2 port, four USB 2.0 ports, a firewire port, UEFI BIOS reset and overclock profile buttons, four USB 3.0 ports, two eSATA ports, a USB/eSATA combo port, Gigabit LAN, optical audio output, and five analog audio outputs.

IMG_3232.JPG

In short, this is a motherboard that Gigabyte has packed to the brim with features for enthusiasts. Below you will find several high-resolution images of the new socket 2011 motherboard. If your internet connection is ready, dive right in!

Gigabyte GA-X79S-UP5 WiFi Motherboard Images

Overhead view:

IMG_3231.JPG

Even considering my bias of my favorite color being blue, the board looks really nice, especially the heatsink designs which really make the board stand out.

CPU socket area:

IMG_3238.JPG

Here we can see the 2011 socket, VRMs, and DDR3 DIMM slots.

More photos after the break!

Source: Gigabyte

Extreme overclocking potential from the new ASUS ROG Rampage IV Extreme

Subject: Motherboards | November 22, 2011 - 05:14 PM |
Tagged: asus, ROG Rampage IV Extreme, socket 2011, x79, ROG

ASUS had the extreme overclocker in mind when they were building the Rampage III Extreme, not many people need two type-K Probe digital thermometers for operating below 0C nor 6 variable resistors, voltage sensors to monitor your GPUs exact current voltage nor an external device to monitor and tweak settings that doesn't need CPU cycles.  If you are more of a casual overclocker you should not let that scare you off as there is a solid BIOS for more casual tweaking which you can even access using an iPhone/iPad over Bluetooth.  It also sports what ASUS calls the X-Socket which will allow you to use an LGA1366 heatsink on this board.  It might cost almost $500 but once you are done reading Hardware Canucks review you might be trying to find ways to put this board in your next system.

HWC_Rampage.jpg

"You saw them in our i7-3960X review; the much anticipated Sandy Bridge Extreme launch along with the X79 code name Patsburg chipsets. Not only do we have a brand new socket (2011) but motherboard manufacturers have have been quick on the uptake and ASUS is trying to lead the pack with their X79 Rampage IV Extreme."

Here are some more Motherboard articles from around the web:

Motherboards

 

Asus Shows Off New X79 Republic Of Gamers Motherboard

Subject: Motherboards | October 25, 2011 - 03:33 PM |
Tagged: x79, socket 2011, sandy bridge-e, ROG, asus

Asus recently unveiled a new X79 socket 2011 motherboard specifically for Sandy Bridge-E, and it looks rather impressive. The new motherboard is a red and black affair that hold several overclocking friendly features and plenty of expansion options. Dubbed the Rampage IV Extreme, the X79 motherboard is part of Asus' Republic of Gamers lineup.

The new motherboard supports Intel's new socket 2011 CPU, eight DDR3 quad channel RAM slots, five PCI-E 3.0 slots (one rated at PCI-E x16 speeds and four at X8 speeds), one further PCI-E 3.0 x1 (physical) slot, and a host of SATA ports. Specifically, the X79 chipset powers two SATA 3 6Gbps and four SATA 2 3Gbps ports while the ASMedia controller powers an additional two SATA 3 6Gbps ports.

Asus Rampage IV Extreme.jpeg

Rear IO on the board includes eight USB 2.0 ports, a PS/2 keyboard/mouse port, ROG Connect and CMOS reset buttons, four USB 3.0 ports, two eSATA 6Gbps ports, Gigabit LAN, Realtek audio powered 5.1 surround sound via five 3.5mm jacks or an optical output. The motherboard further supports Bluetooth version 2.1+EDR.

While the basic specifications of the motherboard are really nice, the most important aspects of the republic of gamers Rampage IV Extreme board are the overclocking features and diagnostics, and there are quite a few. Around the processor socket, there are chokes rated up to 50 amps and have VRMs cooled by a large black heatspreader. The RAM power circuitry, CPU VRMs, and chipsets are all cooled by heatspreaders and connected by aluminum heatpipes. The only issue that some people might run into is with CPU coolers that have wide bases as the heatpipe connecting the VRMs and chipset heatspreader is close to the processor socket, though most coolers will likely work fine.

Moving to the right of the Sandy Bridge-E socket, Asus has provided several handy overclocking tools including the "MEMOK!" RAM diagnostic button that will either reset the settings to get the board to boot or switch to overclocked profiles if activated after the motherboard has gotten past POST. Above that is a set of 4 dip switches to enable or disable the various PCI-E slots. A power and reset button are above those switches and will come in handy for overclocking the board outside of a typical case. Further, there is a diagnostic LED display in the upper right as well as a switch to enable a slow boot mode when using LN2 (liquid nitrogen) cooling. On the voltage front, there are numerous measurement points for CPU, RAM, and chipset voltages. Finally, next to the SATA ports is a odd looking four slot block that allows enthusiasts to measure temperatures of the various physical temperature diodes on the motherboard using "K-type thermocouple" device.

Needless to say, this new X79 based motherboard looks to be living up to its Republic of Gamers heritage thanks to its slew of overclocking and expansion features. If you're interested in seeing more pictures of this shiny bit of hardware, check out this VR-Zone story.

Source: VR-Zone

New Gigabyte Motherboards: Llano, iSSD and Socket 2011 Models

Subject: Motherboards, Shows and Expos | June 2, 2011 - 04:52 AM |
Tagged: ssd, socket 2011, llano, intel ssd, gigabyte, computex, APU

We stopped by the Gigaybte booth during Computex 2011 this week and found a host of new motherboards that range from the mainstream to the ultra-extreme. 

gb01.jpg

First up is the A75-UD4H that supports the new AMD FM1 socket and the upcoming AMD Llano processor.  Even though the APU will have integrated graphics on die, the Gigabyte board support AMD Dual Graphics technology and CrossFire multi-GPU solutions in conjunction with 8 USB 3.0 ports. 

gb02.jpg

The board will include output connections of VGA, DVI, HDMI and DisplayPort along with size USB ports, four of which are USB 3.0. 

gb03.jpg

The Z68XP-UD3 motherboard is one that will be offered in two different ways: one with an SSD and one without.  The "iSSD" model will actually include an mSATA Intel 20GB SLC SSD and should come in at a cost of under $250.  Considering the Larson Creek drive will cost you anywhere from $90-110 on its own, the combination of a Z68 motherboard and SSD is actually very price competitive.  Plus, you get the convenience of having the SSD on the motherboard without it taking up a 3.5-in or 2.5-in drive bay.

gb04.jpg

For those that choose to get the lower cost board without the included Intel SSD you will be able to choose from several other newcomers to the mSATA form factor including Kingston and OCZ.

gb05.jpg

Of course we had to take a look at the Socket 2011 motherboard, the X79A-UD3 with support for the upcoming Intel Sandy Bridge-E processor.  According to the slide information this will include a new version of the SSD caching technology called RSTe (Rapid Storage Technology Enterprise) with support for USB 3.0 and quad-channel DDR3 memory.

gb06.jpg

For those that haven't seen, here is a close up of the Socket 2011 in all its glory - that's a lot of pins!!

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: Gigabyte

ASUS Danshui Bay Motherboard Combines LGA1366 and Socket 2011

Subject: Motherboards, Processors | June 1, 2011 - 09:40 PM |
Tagged: socket 2011, lga1366, danshui bay, asus

At their Republic of Gamers press conference ASUS showed off a prototype concept motherboard that really got some attention.  The board combines an LGA1366 processor socket for current generation Nehalem processors AND a socket for the upcoming Sandy Bridge-E processors called Socket 2011.  What does a beast like this look like?

 

asusdanshui01.jpg

Okay, so this board probably won't fit in your case and maybe won't even see the light of day outside a few reviews and interesting designs.  But the concept is cool to see: use your LGA1366 processor today and still be able to upgrade to the Socket 2011 platform when those CPUs are released.  You can see each processor has its own seperate memory slots though they share most of the other components. 

The price of this board will also likely make it less than appealing to consumers; even those conscious of upgrade paths. 

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: ASUS