Subject: Motherboards | August 30, 2014 - 01:10 PM | Tim Verry
Tagged: xeon, x99 ws, X99, workstation, socket 2011-3, Intel, Haswell-E, asrock
Alongside the X99 Extreme6 for enthusiasts, ASRock has launched the X99 WS (E-ATX) motherboard for professional workstations and servers. The board uses a black PCB, blue aluminum heatsinks on the power phase and PCH areas, and gold colored caps. The E-ATX motherboard uses short screws and a thinner CPU socket backplate to allow it to fit into 1U server cases. You have ample PCI-E slots, DDR4 (and ECC RDIMMs), USB 3.0, Thunderbolt 2 (with an AIC), eSATA, M.2, and SATA III for connectivity. Power is regulated by a 12 power phase "Digi Power" design with high quality Ultra Dual-N MOSFETs, 60A chokes, 12K Nichicon capacitors.
The X99 WS also uses larger heatsinks, especially around the CPU area. The board features an Intel LGA 2011-3 socket that will accept Haswell-E or Xeon E5-1600/2600 v3 processors up to 18 cores and 160W TDPs. Eight memory slots surround the CPU socket and support a maximum of 128GB of DDR4 3200+ memory. Storage is handled by 10 SATA III 6Gbps ports and a single "Ultra M.2" slot that supports SATA III or PCI-E x4 controller equipped drives.
This worskation board takes advantage of the Extended ATX form factor to cram in additional PCI-E 3.0 slots versus the shorter X99 Extreme6. A PCI-E 2.0 x 16 slot sits directly below the CPU socket followed by the (mentioned above) M.2 slot and five PCI-E 3.0 x 16 slots. The five PCI-E 3.0 slots allow for 4-Way CrossFireX and 4-Way SLI multi-GPU setups. To take full advantage of this board, you will want to pair it with the higher end Haswell-E parts (5930K, 5960X, et al) with the full 40 lanes rather than the entry level 5820K with its limited 28 PCI-E lanes.
Using internal headers, the X99 WS supports a TPM module, two COM ports, two USB 3.0 ports, four USB 2.0 ports, and a Thunderbolt port (via an extra add-in-card). It features two CPU fan and three chassis fan headers as well.
The X99 WS features the following ports on the rear IO panel.
- 1 x PS/2
- 4 x USB 2.0
- 1 x eSATA
- 4 x USB 3.0
- 2 x Gigabit LAN
- 1 x Intel I217LM
- 1 x Intel I210AT
- 7.1 Channel Audio (Realtek ALC1150)
- 5 x Analog audio outputs
- 1 x Optical audio output
The X99 WS is available now with a three year manufaturer warranty for $323.99. The price alone pushes this board well into the professional market, but gamers can get most of the way to the WS feature-wise with the X99 Extreme6. The WS goes up against the boards like the ASUS X99-Deluxe and MSI X99S XPOWER AC.
Subject: Motherboards | August 30, 2014 - 01:43 AM | Tim Verry
Tagged: X99, socket 2011-3, lga 2011, Haswell-E, atx, asrock
Today, ASRock unveiled the X99 Extreme6 motherboard, a high end board for enthusiasts featuring Intel's X99 chipset and support for Haswell-E processors and all of the latest connectivity options (short of SATA Express).
This ATX motherboard uses a black PCB, gold capacitors, and blue heatsinks to create an appealing color scheme. A 12 power phase "Digi Power" design feeds the LGA 2011-3 CPU socket. Eight total DDR4 memory slots surround the processor socket (four on each side) with support for up to 128GB of DDR4 running at 3000+MHz (w/ requisite CPU/IMC overclock).
The bottom half of the motherboard hosts the PCI-E slots, PCH, and 10 SATA 3 ports. Specifically, the X99 Extreme6 features three PCI-E 3.0 x16 slots (supporting Triple SLI or CrossFire), two PCI-E 3.0 x1 slots, a single Mini PCI-E connector, and one "Ultra M.2" PCI-E 3.0 x4 M.2 slot for SSDs. Ten right angled SATA III 6Gbps ports sit to the right of the southbridge.
Using internal headers, users can add four USB 3.0, four USB 2.0, one Thunderbolt port (requires an add-on card to work), and one COM port(s) for additional connectivity and connecting case front panel ports.
Rear IO on the Extreme6 includes:
- 1 x PS/2
- 2 x USB 2.0
- 6 x USB 3.0
- 1 x eSATA
- 7.1 Channel Purity Sound 2 Audio (Realtek ALC1150)
- 5 x Analog audio
- 1 x Optical audio output
- 2 x Gigabit Ethernet ports
- 1 x Intel 1218V NIC
- 1 x Qualcomm Atheros NIC
The X99 Extreme6 is part of ASRock's new "Super Alloy X99" lineup. It is available now from retailers for $279.99 with a three year manufacturer warranty.
Also read: Haswell-E: The Intel Core i7-5960X 8-core Processor Review at PC Perspective.
Subject: Motherboards | August 23, 2014 - 11:45 PM | Tim Verry
Tagged: X99, socket 2011-3, Intel, Haswell-E, evga, ddr4, classified
As Intel's next generation enthusiast desktop platfom gets closer to fruition, several leaks (such as Gigabyte's X99 manual) and motherboard teasers have surfaced on the Internet. A few days ago, EVGA posted a teaser photograph of an upcoming "next generation" Micro ATX motherboard on its Instagram page.
The so-called EVGA X99 Micro is set to be the company's smallest Classified-branded X99 chipset offering supporting multiple graphics cards, DDR4 memory, and (of course) Intel's upcoming Haswell-E processors. The all-black motherboard features black heatsinks over the PCH and power delivery hardware. It is outfitted with a 10-phase VRM that feeds the CPU socket (socket 2011-3), two DDR4 memory sockets on each side of the processor socket, three PCI-E 3.0 x16 slots (just enough to max out a Core i7-5820K), one M.2 connector, and six SATA III 6Gbps ports. The board will support USB 3.0 and USB 2.0 ports, but beyond that it is difficult to say what the exact rear IO port configuration will be as a metal shield blocks off the ports in the teaser photo. There is an eight pin CPU power connector along with a 24-pin ATX connector for getting power to the board. Overclockers will be further pleased to see physical power and reset buttons.
According to Maximum PC, this pint sized Classified motherboard will be priced around $250 USD making it one of the most expensive mATX motherboards around. As part of EVGA's Classified series, it should be packing plenty of overclocking friendly features in the UEFI firmware and hardware build quality. This could make for one heck of a powerful small form factor system though, and I'm looking forward to seeing what people are able to get out of this board (especially when it comes to overclocking Haswell-E)!