IDF 2014: HGST announces 3.2TB NVMe SSDs, shingled 10TB HDDs

Subject: Storage, Shows and Expos | September 9, 2014 - 02:00 PM |
Tagged: ssd, SMR, pcie, NVMe, idf 2014, idf, hgst, hdd, 10TB

It's the first day of IDF, so it's only natural that we see a bunch of non-IDF news start pouring out :). I'll kick them off with a few announcements from HGST. First item up is their new SN100 line of PCIe SSDs:

Ultrastar_SN100_Family_CMYK_Master.jpg

These are NVMe capable PCIe SSDs, available from 800GB to 3.2TB capacities and in (PCI-based - not SATA) 2.5" as well as half-height PCIe cards.

Next up is an expansion of their HelioSeal (Helium filled) drive line:

10TB_Market_applications_HR.jpg

Through the use of Shingled Magnetic Recording (SMR), HGST can make an even bigger improvement in storage densities. This does not come completely free, as due to the way SMR writes to the disk, it is primarily meant to be a sequential write / random access read storage device. Picture roofing shingles, but for hard drives. The tracks are slightly overlapped as they are written to disk. This increases density greatly, but writting to the middle of a shingled section is not possible without potentially overwriting two shingled tracks simultaneously. Think of it as CD-RW writing, but for hard disks. This tech is primarily geared towards 'cold storage', or data that is not actively being written. Think archival data. The ability to still read that data randomly and on demand makes these drives more appealing than retrieving that same data from tape-based archival methods.

Further details on the above releases is scarce at present, but we will keep you posted on further details as they develop.

Full press blast for the SN100 after the break.

Source: HGST

HAMRs, Shingles and SSD cached HDDs; size versus speed

Subject: General Tech | August 8, 2013 - 01:58 PM |
Tagged: HAMR, SMR, cache, hdd, Seagate, western digital, hgst, helium

Enthusiasts are wholeheartedly adopting SSDs for their storage media of choice with HDDs relegated to long term storage of infrequently accessed storage.  For SMB and enterprise it is not such an easy choice as the expense to move to a purely SSD infrastructure is daunting and often not the most cost effective way to run their business.  That is why HDD makers continue to develop new technology for platter based storage such as HAMR and shingled magnetic media in an attempt to speed up platter drives as well as increasing the storage density.  Today at The Register you can read about a variety of technologies that will keep the platter alive, from Seagate's cached Enterprise Turbo SSHD, HGST's helium filled drives and the latest predictions on when HAMR and SMR drives could arrive on the market.

turbo_sshd_spc1c_iops.jpg

"At a briefing session for tech journos yesterday, Seagate dropped hints of new solid-state hybrid drives (SSHDs) - which combine a non-volatile NAND cache with spinning platters - and a general session about Shingled Magnetic Recording (SMR) and Heat-Assisted Magnetic Recording (HAMR)."

Here is some more Tech News from around the web:

Tech Talk

Source: The Register