Subject: Cases and Cooling | June 6, 2015 - 08:51 AM | Sebastian Peak
Tagged: small form factor, SFX, SFF, SF600, PSU, power supply, corsair, computex 2015, computex
Corsair has shown its first SFX form-factor PSU at Computex, the SF600.
Image credit: Tom's Hardware
True to its name the SF600 is a 600W PSU, and it features a fully modular design and will carry an 80 PLUS Gold certification. According to the report from Tom's Harware Corsair is using a 92 mm fan with the SF600, slightly larger than the 80 mm fans found in standard SFX power supplies, but smaller than the 120 mm fans that SilverStone has been using in its SFX-L form-factor PSUs.
Image credit: Tom's Hardware
This PSU was secretly powering the new Corsair Bulldog living room PC, also shown at Computex. Naturally there was no announcement on pricing or availability for this new PSU, but we'll keep you posted if anything official is announced.
Subject: Cases and Cooling | June 4, 2015 - 07:06 PM | Tim Verry
Tagged: SFX PSU, SFF, node 202, mini ITX, HTPC case, fractal design, computex 2015, computex
Fractal is showing off several new products at Computex, but the one that caught my eye was the new Node 202 which is a small form factor Mini ITX case perfect for the living room. The thin case is all black with a metal texture finish, rounded corners, and diagonal ventilation grilles along the sides and top. The 10.2 liter capacity case measures 377mm x 88mm x 332mm (including case feet) and can accommodate SFX power supplies, Mini ITX motherboards, and a dedicated graphics card.
The front of the case has two USB 3.0 ports and two audio jacks in the bottom left corner next to the power button. Large filtered vents are located on the right, top, and bottom of the case while the left side has a thin grill along the bottom. Needless to say, there is plenty of room for airflow and the case would do well with both air cooled and fanless systems. Users can mount the case horizontally or vertically using an included stand. Interestingly, the Node 202 divides the case into two separate chambers to isolate the graphics card from the CPU, motherboard, and power supply to facilitate cooling.
Internally, the Node 202 has room for a Mini ITX or Thin Mini ITX motherboard with CPU coolers up to 56mm tall, a 130mm SFX power supply, and a dual slot graphics card up to 310mm in length. Users can install up to two 120mm fans in the GPU chamber. Storage support tops out at two 2.5" hard drives or solid state drives (SSDs).
Fractal Design is also offering a version of the Node 202 bundled with its Integra SFX 450W power supply. The 80+ Bronze power supply will come with custom length cables and connectors designed specifically for the Node 202. It is covered by a 3 year warranty.
The PSU-less Node 202 will have a MSRP of $79.99 while the Node 202 with bundled PSU will be $139.99. Both models will be available soon in the US.
Subject: General Tech, Systems, Storage | May 30, 2015 - 02:14 AM | Tim Verry
Tagged: zotac, zbox, SFF, raid, mini server, media server
Zotac recently launched a new line of tiny ZBOX PCs under the new R Series that support two drive RAID 0 and RAID 1 setups. The series currently includes the ZBOX 1323 and ZBOX R1531. Both systems can be mounted vertically or horizontally and strongly resemble the company's existing ZBOX computers. The top and bottom panels are black with a silver bezel around the sides. A Zotac logo sits in the corner and a large blue circle sits in the center of the top.
The front panel hosts two audio jacks, an SDXC ard reader, COM port, IR reciever, and power button. Around back, the ZBOX boasts two antennas for the internal wireless module, two Gigabit Ethernet jacks, two USB 3.0 ports, and DisplayPort and HDMI video outputs. A third USB 3.0 port sits along the top edge of this small form factor PC.
Internally, Zotac is using Intel processors, a small form factor motherboard with two SO-DIMM slots (up to 16 GB), a Mini PCI-E slot for the 802.11ac (plus Bluetooth 4.0) wireless card, and support for up to two 2.5" SATA drives. The motherboard supports RAID 0, RAID 1, and JBOD configurations for the SATA drives, and the R1531 SKU adds a mSATA slot for a third drive.
The ZBOX R1323 is equipped with a 11.5W dual core Intel (Haswell) Celeron 2961Y processor clocked at 1.1 GHz with 2MB cache and Intel HD Graphics clocked at up to 850 MHz. The ZBOX R1531 steps up to a 15W dual core (plus Hyperthreading) Broadwell-based Intel Core i3-5010U clocked at 2.1 GHz with HD 5500 graphics clocked at up to 900 MHz.
Both versions will be offered as barebones systems and the R1531 is additionally be sold in a PLUS model that comes with a 64GB mSATA SSD and 4GB of RAM pre-installed.
The new ZBOX R Series PCs would make for a nice home server with a mSATA drive for the OS and two storage drives in a RAID 1 for redundancy. The Core i3 should be plenty of horsepower for streaming media, running backups, running applications, and even some light video transcoding. The included COM port will also make it suitable for industrial applications, but I think this is mostly going to appeal to home and small business users.
Zotac has not yet revealed pricing or availability though. Hopefully we are able to find out more about these mini PCs at Computex!
Subject: General Tech, Systems | May 29, 2015 - 07:53 PM | Tim Verry
Tagged: Cherry Trail, SFF, pentium, nuc, Intel, celeron, Braswell, Airmont
Reports around the web along with this Intel PDF point to the official launch of a new low power NUC coming next month. The NUC5CPYH and NUC5PPYH are powered by Braswell-based Intel Celeron and Pentium processors topping out at 6W TDPs.
These new NUC models have room for a motherboard, Braswell processor, a single laptop memory slot, a Mini PCI-E slot for the wireless module, and one 2.5" hard drive or SSD. There is no support for mSATA here which likely helped Intel cut costs (and as Olivier from FanlessTech points out mSATA support was dropped around the time of NUC 2.0). Further, unlike the lower power (4W versus 6W TDP) Braswell-based ASRock PC (which is also SFF but not a NUC), the two Intel NUCs are surely actively cooled by a fan.
On the outside of the compact PC, users have access to two USB 3.0 ports (one charging capable 5V/3A), a headphone/mic jack, infrared receiver, and SDXC memory card reader on the front. The rear panel hosts an additional two USB 3.0 ports, HDMI output, Gigabit LAN port, and optical audio output. The PC also has a Kensington lock port and is VESA moutable.
Internally, Intel has opted for two of the highest power Braswell processors, the Intel Celeron N3050 and Intel Pentium N3700. Both are 14nm chips with a 6W TDP with Airmont CPU cores and Intel HD Graphics. The N3050 is a dual core part clocked at up to 2.16 GHz (1.6 GHz base) with 2MB cache and HD Graphics clocked between 320 and 600 MHz. The Pentium N3700 model on the other hand features four CPU cores clocked at up to 2.4 GHz (1.6 GHz base) paired with HD Graphics clocked at 700 MHz (400 MHz base).
Both the NUC5CPYH and NUC5PPYH will reportedly be available on June 8th starting at $140 and $180 respectively. This is an interesting price point for NUCs though it's popularity is going to heavily depend on the Braswell CPU's performance especially with Bay Trail-powered versions still on the market for even less (though with less performance).
Subject: Systems | May 26, 2015 - 02:37 PM | Jeremy Hellstrom
Tagged: shuttle, SFF, fanless, Broadwell, DS57U, Celeron 3205U
The Shuttle DS57U is powered by a dual core Celeron 3205U running at 1.5GHz and a nice and cool 15W TDP. The system supports up to 16GB of DDR3 at 1.35 V, no 1.5V DIMM that TechPowerUp tried would work and for add-in cards you have a single full sized mini-PCIE slot and a half sized mini-PCIE slot which is already occupied by a WLAN card. The system does have only one SATA 6Gbps port so external storage may be necessary, thankfully there are a pair of USB 3.0 ports and four USB 2.0 ports. This model is available for $250 currently, if you decide you need more power there are several versions going all the way up to the DS57U7 powered by an i7-5500U. If you are looking for an inexpensive SFF barebones system, Shuttle is not a bad choice overall and the DS57U is worthy of consideration.
"The Shuttle DS57U is a slim barebone PC that only needs RAM and a HDD or, even better, an SSD to boot. It comes with an Intel dual-core Celeron processor (Broadwell) and features lots of I/O ports, which make it suitable for a wide range of applications."
Here are some more Systems articles from around the web:
- Asus VivoPC VM62B @ Kitguru
- MSI CUBI @ HardwareHeaven
- MSI Cubi @ KitGuru
- Gigabyte Brix S @ HardwareHeaven
- KitGuru Complete Guide to Buying a Workstation
- KitGuru Complete Guide to PC Workstations – Part 2
- BuyPower Noctis Intel Z97 @ eTeknix
- The making of Damagebox 2015 @ The Tech Report
Subject: General Tech, Systems | May 26, 2015 - 01:18 AM | Tim Verry
Tagged: SFF, nuc, Intel, fanless, Cherry Trail, Braswell, asrock
Earlier this month, ASRock showed off a tiny fanless computer it is calling the Beebox. Powered by an Intel Braswell SoC, the new small form factor Beebox offers up a decent selection of I/O ports and general desktop performance while sipping power. The Beebox is approximately the size of Intel's NUC measuring 118.5mm x 110mm x 46mm x (4.67" x 4.33" x 1.81" -- WxDxH) and will come in three color options: black, gold, and white.
This compact PC has a fairly extensive set of ports on tap. The front panel includes a headphone jack, infrared port, one standard USB 3.0 port, and a USB 3.0 Type-C port which supports 5V/3A charging. The rear panel hosts the power jack, two HDMI outputs, one DisplayPort output, two USB 3.0 ports, a Realtek-powered Gigabit Ethernet port, and a Kensington lock slot. Not bad for a small form factor PC.
ASRock will be offering the Beebox in three configuration options including a barebones kit, a version with 32 GB internal storage, 2 GB of RAM, and Windows 10, and a Beebox SKU with 128 GB of internal storage and 4 GB of RAM (and no OS pre-installed). Each of the SKUs are powered by the same Intel Celeron N3000 Braswell SoC. From there, users can add a single 2.5" SATA drive and a Mini PCI-E card (although this slot is occupied by the included 802.11ac Wi-Fi and Bluetooth 4.0 wireless module). The system uses two DDR3L SO-DIMMs and supports a maximum of 8 GB DDR3L at 1600 MHz.
The aspect that made the Beebox stand out to me was the inclusion of the Braswell-based Celeron N3000 processor. This 4W 14nm part features two Airmont CPU cores clocked at 1.04 GHz base and 2.08 GHz turbo paired with 2MB L2 cache and a Gen 8 Intel GPU clocked at up to 600 MHz. This is a desktop variant of the Cherry Trail chips being used in tablets, but it is the lowest TDP Braswell chip currently at a mere 4 watts. ASRock likely went with this chip to ensure they could passively cool it and still keep temperatures in check. As FanlessTech notes, the chassis ASRock is using leaves a lot to be desired when it comes to heat dissipation compared to other fanless cases on the market.
We will have to wait for reviews to see how well the Beebox and its Braswell processor perform, but so long as ASRock is able to keep thermals in check, the little PC should offer acceptable performance for general desktop tasks (browsing the internet, checking email, watching streaming videos, etc). Cherry Trail (and keep in mind Braswell is a higher power chip based on the same architectures) is promising noticeable improvements to graphics and at least slight improvements to CPU performance. According to ASRock, the Beebox is going to be priced aggressively at "very low" price points which should make it a good compromise between older Bay Trail-D systems and newer (and more expensive) Broadwell and Haswell systems.
The Beebox is slated for late June availability, with exact pricing to be announced at that time.
Some familiar scenery
If you thought that Intel was going to slow down on its iteration in the SFF (small form factor) system design, you were sadly mistaken. It was February when Intel first sent us a NUC based on Broadwell, an iterative upgrade over a couple of generations for this very small platform, 4" x 4", that showed proved to be interesting from a technology stand point but didn't shift expectations of the puck-sized PC business.
Today we are looking at yet another NUC, also using a Broadwell processor, though this time the CPU is running quite a bit faster, with Intel Iris 6100 graphics and a noticeably higher TDP. The Core i7-5557U is still a dual-core / HyperThreaded processor but it increases base and Turbo clocks by wide margins, offering as much as 35% better CPU performance and mainstream gaming performance boosts in the same range. This doesn't mean the NUC 5i7RYH will overtake your custom built desktop but it does make it a lot more palatable for everyday PC users.
Oh, and we have an NVMe PCI Express SSD inside this beast as well. (Waaaaaa??)
Subject: Cases and Cooling | May 4, 2015 - 04:43 PM | Jeremy Hellstrom
Tagged: Silverstone, SFF, Argon Series, AR06
If the Silverstone Argon Series AR05 was a little too small for you and your SFF system needs something with a little more cooling power you can check out the AR06. At 105x92x58mm it is a little taller than the AR05 and at 263g naked it is a little heavier. [H]ard|OCP tested it on a 4770K overclocked to 4.4GHz and it could keep it at a temperature of 88.5C, a little warm but very impressive for such a little cooler. Even more impressive is that the MSRP for the AR06 is the same as the AR05. Check out their full review right here.
"Many enthusiasts are opting for smaller footprint cases now days, and SilverStone comes to us with its higher performance low profile cooler that measures in at just 52mm tall. It has double the heatpipes of the last SilverStone cooler we reviewed and services a host of CPU sockets for both AMD and Intel."
Here are some more Cases & Cooling reviews from around the web:
- Thermalright TRUE Spirit 140 BW Rev.A CPU Cooler Review @ NikKTech
- Noctua NH-D9L Review @ OCC
- Thermaltake Core V21 @ Kitgru
- Fractal Design Define S Full-Tower @ eTeknix
- Raidmax Viper GX II Mid Tower Case Review @ Neoseeker
- Bitfenix AEGIS midi tower in red @ HardwareOverclock
Subject: Cases and Cooling | May 3, 2015 - 09:33 PM | Tim Verry
Tagged: xigmatek, SFF case, SFF, nebula c, mini ITX
Looking for a cute and cuddly case? Xigmatek may have you covered with its latest Mini ITX-friendly Nebula C chassis which will soon be available in pink, purple, yellow, lime, and emerald colors.
Measuring 305 mm (H) x 260 mm (W) x 260mm (D) or roughly 12" x 10" x 10", the Nebula C has a SECC Steel frame paired with an ABS plastic exterior. There is a power button nestled in the top right corner, front I/O (two USB 3.0 and two audio ports) on the right side, and a triangular orange cutout in the bottom left corner for aesthetic reasons. Apart from that, the Nebula C is smooth plastic with little in the way of vents, logos, or other garnishments. Cooling is handled by a large passive mesh vent on the bottom of the case and a single 120mm fan on the rear panel. There is space for regular ATX power supplies, two expansion slots, and external water cooling radiators by way of two rubber grommets.
Internally, the Nebula C can hold a standard Mini ITX motherboard, a CPU heatsink up to 80mm tall, a full height graphics card up to 230mm in length, one 3.5" drive bay and one 2.5" bay. Using an adapter, you can fit a maximum of three 2.5" drives in this system. The support for ATX power supplies is nice to see as there are many more options in this space as well as better quality parts with lower noise at similar price points ( you would have to spend more money to get these features in a small form factor PSU where available).
Judging from Bit-Tech's review of the glossy white Nebula C, the case looks very easy to work with and the ability to remove all three side panels should make it easy to get at just about every bit of hardware without needing to take anything out of the case. They do note that cable management is a pain, and that a modular power supply is recommended. Since the motherboard is mounted on the bottom with the drive bays and PSU mounted above that, I can see how it could easy start to look like a rats nest in there if you don't plan ahead on this part of the build process. In all, it may be a worthy small form factor case if you have less than $100 and want something with a bit of color.
The refreshed Nebula C cases in pink, purple, lime, emerald, an yellow will be available soon. There is no official word on pricing or availability, but expect them to go for around $80 USD (if the glossy white version is any indication).
Subject: General Tech, Systems | May 3, 2015 - 04:27 PM | Tim Verry
Tagged: z97, xeon e5-2699v3, X99, tiki-z, tiki, SFF, liquid cooling, Haswell-E, falcon northwest, core i7-5960x
Falcon Northwest recently upped the hardware ante on its small form factor Tiki PC. Previously limited to Z97-based hardware, the company is now offering Tiki PCs with X99 motherboards. Even better, the Tiki can be configured with Intel’s Haswell-E Core i7-5000 or Haswell-EP Xeon chips such as the Core i7-5960X or Xeon E5-2699V3.
The updated Tiki maintains the same steel and aluminum case measuring 13” x 4” x 13” (HxWxD) with customizable paint work and a removable solid aluminum or granite base as its predecessors (e.g. Tiki-Z). External I/O options include the latest USB 3.1, eSATA, and Dual Intel Gigabit LAN ports. Internally, the Tiki has space for an Intel Z97 or X99 motherboard with a liquid cooled processor, up to 32GB of DDR4 (or 16GB DDR3 with Z97) memory, a dedicated graphics card up to an NVIDIA GTX TITAN X or Quadro and ample storage space in the form of four 2.5” drives or one 3.5” and two 2.5” drives.
All this hardware amounts to an impressive amount performance in general – much less a small form factor system. At the upper echelon, the Xeon E5-2699V3 offers 18 cores (36 threads with HT) clocked at up to 3.6 GHz paired with 45MB of L3 cache. Paired with a Quadro card like the M6000, that is one powerful workstation!
The updated Tiki is aimed at gamers and workstation builds doing intensive workloads like CAD, 3D animation, and video production.
The downside to this stylish powerhouse is, of course, pricing – the Tiki is far from cheap and the boutique premium is quite evident here. Available now, the updated Tiki starts at $1,860 for a base level Z97 system with quad core CPU or $2,492 for an eight core X99-based system. Fully loaded, the Tiki tops $10,000.
It is definitely an extremely niche product, but the engineering and styling is impressive all the same!