Subject: General Tech | September 13, 2013 - 04:15 AM | Tim Verry
Tagged: solidrun, SFF, Freescale, cubox-i, arm
SolidRun Ltd. Has come up with its own ARM-powered mini computer called the CuBox-i. The new PC measures 2” x 2” x 2” and has some respectable IO for its size. The CuBox-i comes in multiple flavors from $45 to $120. The cheapest version competes in many ways with the Raspberry Pi while the top-end device is more in line with Android development boards that tend to run in the hundreds of dollars.
There are actually four SKUs in the CuBox-i series:
The CuBox-i PCs are powered by single, dual, or quad core variant of a Freescale i.MX6 SoC at up to 1.2 GHz. The SoC uses ARMv7 instructions and dedicated NEON media encode/decode hardware. The GPU included in the SoC supports OpenGL ES 2.0 on all models, and the GPU in the two higher-end models further supports OpenCL 1.1 embedded. Memory is 512MB on the $45 CuBox-i1, 1GB on both CuBox-2 systems, and 2GB of DDR3 on the CuBox i4Pro. The mini PCs support 1080p video playback, and are compatible with Android 4.2.2, XBMC, and various Linux distributions.
IO on the CuBox-i PCs includes two powered USB 2.0 ports, HDMI, Ethernet (Gigabit on the higher end models, limited to less than 470 Mbps internally), one eSATA 3Gbps port, an optical S/PDIF output, microSD slot, microUSB (RS-232 adapter on higher end models), and an infrared reciever. The two higher-priced models also include an infrared transmitter. The high end systems also support Wi-Fi b/g/n, Bluetooth, and a hardware RTC (Real Time Clock) with backup battery.
The table above shows the breakdown of IO and internal hardware in the various SKUs. While the systems start at $45, it is the higher priced models that add some interesting features. It is always nice to see competition in the mini PC space. The CuBox-i series will be available in limited quantities later this year. Pre-order pricing breaks down as follows:
- CuBox-i1 for $45
- CuBox-i2 for $70
- CuBox-2Ultra for $95
- CuBox-4Pro for $120
Compared to the previously-announced CuBox Pro, the CuBox-i series is slightly cheaper, uses a faster SoC, and is available in multiple SKUs. For example, the top-end CuBox-i4Pro is a bit cheaper at $120 versus $160 for the CuBox Pro's original price. Naturally, the lower end CuBox-i's are even cheaper but also have less memory and IO.
Subject: General Tech | September 8, 2013 - 10:01 PM | Tim Verry
Tagged: SFF, Intel, htpc, haswell, gigabyte brix, gigabyte
Gigabyte recently updated its BRIX line of small form factor PCs to include Intel Haswell processors, 4K display support, and additional IO port options. The new BRIX systems measure 29.9mm x 107.6mm x 114.4mm and feature a chassis constructed of anthracite aluminum with a glass top panel. The new BRIX PCs come in four SKUs, each of which comes with an Intel Haswell processor of i7, i5, i3, or Celeron varieties.
The BRIX PCs come with the case, a small Gigabyte motherboard, an Intel CPU, and a wireless module with 802.11n and Bluetooth 4.0 radios. Users can choose their own mSATA SSD, DDR3 SO-DIMMs (two per system, up to 16GB), and operating system. The front panel of the Haswell-powered BRIX PCs includes two USB 3.0 ports and a headphone jack that doubles as an optical S/PDIF output.
The back panel of the BRIX system includes:
- 2 x USB 3.0 ports
- 1 x RJ45 Gigabit Ethernet (Realtek RT8111G NIC)
2 x Video outputs:
- 1 x Mini-DipslayPort
- 1 x HDMI
- 1 x DC-in
- 1 x Kensington Lock
Internally, the BRIX PCs have one Mini-PCI-E slot, one mSATA slot, and two DDR3 SO-DIMM slots. The Mini-PCI-E slot is used by the pre-installed Wi-Fi module, however. Processor options include the Intel Celeron 2955U, Core i3-4010U, Core i5-4200U, and Core i7-4500U. At the high end, the i7-4500U is a dual core CPU with HyperThreading, 4MB cache, and clockspeeds of 1.8GHz base and 3.0GHz turbo. The i5 also has turbo boost, but only up to 2.6GHz. The Core i3-4010U has HyperThreading but no Turbo Boost while the Celeron is stripped of both Turbo Boost and HyperThreading. The chart below lists all the processor specifications.
|Processor||Core i7-4500U||Core i5-4200U||Core i3-4010U||Celeron 2955U|
|Cores / Threads||2 / 4||2 / 4||2 / 4||2 / 2|
|Clockspeeds||1.8 GHz to 3.0 GHz||1.6 GHz to 2.6 GHz||1.7 GHz||1.4 GHz|
The new Haswell-powered Gigabyte BRIX PCs include the GB-BXCE-2955, GB-BXi3-4010, GB-BXi5-4200, and GB-BXi7-4500. Unfortunately, the company has not yet released pricing or availability for the SFF devices. More informtation on the Haswell models can be found on this Gigabyte microsite.
Read more about the Gigabyte BRIX platform and how it compares to the competition here.
Subject: Systems | August 5, 2013 - 09:00 AM | Tim Verry
Tagged: SFF, msi, Intel, embedded, atom d2550
MSI recently launched the MS-9A29, which is a fanless small form factor (SFF) embedded PC. The new PC measures 196mm x 136mm x 43mm and weighs 1.2 kg. The MS-9A29 is encased in a small black chassis that is covered in fins to aid in passive cooling with the front and back banels hosting various IO ports.
Front IO includes four USB 2.0 ports and four COM ports. The back panel holds two RJ45 GbE jacks driven by two Intel 82583V NICs, one line out audio jack (Realtek ALC887 HD codec), two USB 2.0 ports, a single HDMI port, and one VGA port. Finally, the case provides two openings for antenna passthroughs.
Internally, the MSI MS-9A29 features an Intel Atom D2550 processor (dual core at 1.8GHz, 10W TDP), Intel GMA 3650 GPU (400MHz), a single DDR3 SO-DIMM slot (4GB maximum), and Intel NM10 Express chipset. The motherboard can be accessed by a removeable bottom panel on the case. The system supports one SATA drive, one mSATA drive, and two Mini-PCI-E cards. One mini-PCI-E slot can be used for a 3G SIM card adapter.
The SFF MSI MS-9A29 can be mounted to the back of monitors or on a wall. It supports Windows 7 and Windows XP and can output video to two simultaneous displays. It is aimed at kiosks, signage, POS, and industrial machines.
More information can be found on the MS-9A29 product page. However, the company has not yet released pricing or availability (expect it to be on the pricier side though as it is aimed at business/industrial users).
Subject: General Tech, Systems | August 3, 2013 - 04:13 AM | Tim Verry
Tagged: SFF, open source hardware, open source, minnowboard, Intel, embedded system, atom
The Intel Open Source Technology Group along with CircuitCo recently launched a new small form factor bare-bones system based on open source hardware and running open source software. The Minnowboard includes a 4.2” x 4.2” motherboard, passively-cooled processor, rich IO, UEFI BIOS, and the Angstrom Linux operating system.
The Minnowboard is powered by a single core Intel Atom E640 processor clocked at 1GHz. It is a 32-bit CPU with HyperThreading and VT-x virtualization support. Other hardware includes an integrated Intel GMA 600 GPU, 1GB of DDR2 memory, and 4MB of flash memory used for motherboard firmware. Storage can be added by plugging a SSD or HDD into the single SATA II 3Gbps port.
The Minnowboard has following IO options:
- 1 x micro SD
- 1 x SATA II 3Gbps
- 2 x USB 2.0 ports
- 1 x micro USB
- 1 x mini USB (serial connection)
- 1 x RJ45 jack (Gigabit Ethernet)
- 2 x 3.5mm audio jacks (line in and line out)
- 1 x HDMI
The Minnowboard also has a GPIO header with 8 buffered GPIO pins, 2 GPIO LEDs, and 4 GPIO switches. As such, the system can be expanded by adding extra open source modules called “Lures.” The board is aimed at developers and embedded system manufacturers. The Minnowboard can be used as the bare system or can be integrated into a case or larger device.
The Minnowboard costs $199 and is available for purchase now from Digi-Key, Farnell (UK), Mouser, and Newark.
Obviously, the Minnowboard is nowhere near as cheap as the $35 Raspberry Pi, but it is running x86 hardware which may make it worth it to some users.
If you are interested, you can learn more about the hardware and get involved with the Minnowboard project over at Minnowboard.org.
Subject: General Tech, Cases and Cooling | July 20, 2013 - 03:29 AM | Tim Verry
Tagged: Intel, dccp847dye, nuc, SFF, pcn, wi-fi
Intel recently posted a Product Change Notification (PCN, number 112432-00) regarding one of its first NUC bare-bones systems, model number BOXDCCP847DYE. The PCN seeks to address the overheating issues that several hardware review sites encountered when performing large file copies across the network using the built-in Wi-Fi card. Intel has reportedly found a solution by adding a 9.5mm thermal pad to the underside of the top cover. The thermal pad will make contact with the mSATA SSD and facilitate heat transfer from the drive into the metal chassis.
The overheating problems spotted by PC Perspective (in our review) and other tech sites lead to system freezes and restarts. When transferring large amounts of data across the network, the built-in mPCI-E Wi-Fi card would heat up, and because the SSD is mounted just above the Wi-Fi card, the system would lock up or crash when the SSD overheated. Thus, Intel’s workaround is to improve the cooling of the SSD such that it (hopefully) will no longer overheat and users will not have to resort to buying a USB Wi-Fi dongle or running an Ethernet cable to the switch.
According to the PCN, the solution works and system retailers should expect shipments of the BOXDCCP847DYE with upgraded cover to arrive as early as August 1st. Notably, Intel is planning to ship out all pre-modification inventory before moving onto shipping updated bare-bones systems. It may be some time before consumers can be sure they are getting the updated model. In the meantime, users can always opt to use one of the many third party NUC cases that take full advantage of passive cooling techniques.
Subject: General Tech, Systems | July 14, 2013 - 11:51 PM | Tim Verry
Tagged: utilite, ubuntu, silent, SFF, linux, fanless, cortex-a9, compulab, arm, Android
CompuLab has announced a new fanless, small form factor PC called the Utilite. This new PC comes from the same company that engineered the MintBox, MintBox 2, and Fit PC series. The Utilite is a low-power desktop PC powered by a quad core ARM Cortex A9 processor and runs either Ubuntu Linux or Google’s Android operating system.
The upcoming Utilite measures 5.3” x 3.9” x 0.8”(135 x 100 x 21mm) and consumes anywhere between 3W and 8W of power depending on the particular hardware configuration. It is designed to be a quiet desktop replacement with plenty of IO.
CompuLab will provide single core, dual core, and quad core CPU SKUs. Specifically, the Utilite is powered by a Freescale i.MX6 ARM Cortex-A9 MPCore processor that is clocked at up to 1.2 GHz. Users will be able to further configure the system with up to 4GB of DDR3 1066 MHz memory and a 512GB mSATA SSD. Storage can be further expanded using Micro SD-XC cards (maximum of 128GB per card). The GPU in the SoC is compatible with OpenGL ES 1.1 and 2.0 as well as OpenVG 1.1 and OpenCL EP. It is capable of hardware decoding multi-stream 1080p video in a variety of common formats.
Wireless functionality includes an 802.11b/g/n Wi-Fi card and Bluetooth 3.0.
The Utilite has a dark gray case with silver front and rear bezels.
The front of the Utilite PC features the following IO options in addition to the power button and indicator LEDs.
- 1 x USB OTG (Micro USB)
- 1 x RS232 (ultra mini serial connector)
- 1 x Micro SD card slot
- 2 x USB 2.0
- 2 x 3.5mm audio jacks (line in, line out)
The rear of the PC hosts:
- 1 x DC power input
- 1 x Wi-Fi antenna
- 1 x RS232 (ultra mini serial connector)
- 2 x USB 2.0
- 2 x Gigabit Ethernet RJ45 jacks
- 2 x HDMI video outputs
According to fanless PC guru FanlessTech, CompuLab will be releasing the ARM-powered Utilite mini PC next month with a starting price of $99 and a variety of SKUs with varying amounts of CPU cores, memory, and storage. The Utilite PC is a bit on the expensive side, but this is a system for industrial and enterprise use as well as consumers, and Olivier from FanlessTech notes that build quality should be on par with those goals/industry aims.
Subject: General Tech, Systems | July 12, 2013 - 02:26 AM | Tim Verry
Tagged: zotac, zbox, SFF, Nano, Ivy Bridge, Intel, hd 4000
Zotac has announced three new ZBOX Nano SKUs that utilize Intel’s 3rd Generation “Ivy Bridge” processors and HD 4000 processor graphics. The new SKUs include base and PLUS models of ID63, ID 64, and ID65 mini PCs.
The tiny PCs continue to use the ZBOX Nano form factor of approximately 5 x 5 x 1.8 inches. The front of the small form factor (SFF) PC holds two USB 2.0 ports, an SD card reader, two audio jacks, LEDs, and a power button. The rear of the ZBOX Nano PCs features an external antenna for Wi-Fi along with the following IO.
- 4 x USB 3.0
- 1 x eSATA
- 1 x HDMI
- 1 x DisplayPort
- 1 x Gigabit Ethernet
The PC comes with a VESA 75/100 mount for wall mounting or attaching to the back of a monitor.
Internal specifications include an Intel Core i3 3227U (dual core at 1.9GHz), Core i5 3337U (dual core at 1.9GHz base, 2.7GHz turbo), or Core i7 3537U (dual core at 2.0GHz base, 3.1GHz turbo) processor depending on the specific SKU. The base barebones ZBOX Nano PCs support a single DDR3 SO-DIMM (up to 8GB 1600MHz) and a single 2.5” hard drive.
Zotac’s ZBOX Nano Plus units bundle in 4GB of DDR3 and a 500GB hard drive. Zotac also includes a “nanoRAID” adapter that will allow users to switch out a traditional 2.5” storage drive for two mSATA drives. The adapter supports RAID 0 and RAID 1 options as well.
Pricing and availability for the new ZBOX Nano SKUs has not been announced yet, but the mini PCs should be up for sale soon.
The decision to release new models with Ivy Bridge processors instead of Intel's latest Haswell CPUs is a bit strange, but the SFF PCs have likely been in the making and testing phase for a while. I expect Haswell-powered versions to be released at some point in the future but for now the Ivy Bridge models will offer up more performance than previous ZBOX Nano units.
Akasa has debuted a new passively cooled chassis for Intel's NUC platform called the Newton. The new chassis measures 154mm x 150mm x 47mm and does double duty as both a case and passive (fan-less) heatsink for the Intel processor soldered onto the NUC motherboard.
Specifically, the Akasa Newton case can support the Intel D33217GKE or DCP847SKE NUC (Next Unit of Computing) motherboard, depending on whether you want an Intel Core i3-3217-U or a Celeron 847-U respectively.
The Akasa Newton case supports all of the IO of the NUC boards, including a single USB port on the front, and two USB ports, two HDMI outputs, and one Gigabit Ethernet port. The case also has two antenna jacks for the mini-PCIe WI-Fi card and a DC power in jack.
The case is entirely matte black with a brushed aluminum front bezel and curved corners. The boxy case comes with a VESA mount for attaching to the back of monitors or using a wall mount. The top of the case is finned to increase the surface area and aid in cooling the CPU.
Overall, it looks like a decent NUC chassis for a silent, passively cooled system. The Akasa Newton is available now for 50 Euros (including VAT).
Subject: General Tech | June 29, 2013 - 02:22 PM | Tim Verry
Tagged: SFF, mintbox 2, mintbox, linux mint, linux
Last year, CompuLabs and the developers behind the Linux Mint operating system put together a small form factor PC called the MintBox. It seems that the project was successful enough to warrant a updated offering, because specifications were recently posted online for the MintBox 2. The MintBox 2 is a router sized, passively cooled PC that will be available later this year for $600.
The new MintBox 2 reportedly offers up to four-times the performance of the original MintBox Pro. Internal specifications will include an Intel Core i5 3337U processor clocked at 1.8GHz base (2.7GHz max turbo), 4GB of RAM (8GB max), a 500GB mechanical hard drive, and a NIC with two Gigabit Ethernet ports. The fan-less system is tiny, at 7.5" x 6.3 " x 1.57" (19 x 16 x 4cm). It will be available on Amazon for $599.
Where the original MintBox Basic and MintBox Pro scored 1,077 and 1,615 in the Geekbench benchmark, the upcoming MintBox 2 scored 7,541. In addition to the extra performance, CompuLabs is also extending the warranty period from 1 year on the original MintBox PCs to 5 years for the MintBox 2.
The MintBox 2 will come pre-installed with the latest Linux Mint 15 "Olivia" operating system.
A small Linux Mint logo is surrounded by four USB 2.0 ports on the front of the device. Exact rear IO specificaitons has not yet been released, but if last year's model is any indication, users can expect more USB 2.0 ports, a couple of USB 3.0 ports, eSATA, digital display outputs, and an eSATA port.
More information can be found on the Linux Mint blog.
Subject: General Tech | June 3, 2013 - 01:28 AM | Tim Verry
Tagged: SFF, m8, Lan Box, computex 2013, case, bmw, asrock
New PC cases seem to be popular at Computex this year, and ASRock may have just blown away the small form factor competition with its compact BMW Group-designed “M8” chassis.
The new “M8” case was designed by a BMW Group consultancy firm called DesignworksUSA. They have created a compact metal case that will be right at home at a LAN party or on many enthusiasts' desks. The case is a large square with cut-off corners and indented side panels. It is designed to show off the PC internals with a large octagonal side window, and can be stood upright or laid out horizontally. Carrying handles are integrated into the corners as well, making it easier to carry to LAN parties. The front of the case includes the “A-Command” button which is basically a large home theater-style volume control dial with an integrated OLED screen. The dial can adjust audio volume and fan speeds while the OLED display reports on system temperature, time, and usage (presumably HDD or CPU activity indicators).
The case has a rather clean and sharp look that shows a bare metal side and a glossy black front panel. The BMW Group has added red accents to the front panel and side windows. In an interesting twist, according to the press release, the side panels are magnetic which enables easy access to the internals.
The small form factor (SFF) M8 case will be used by ASRock to create a custom gaming PC. The internal specifications have not yet been announced, however.
This is definitely a unique design that is likely to be popular among the enthusiast and gamer crowd. You can find more photos of the M8 case on the BMW Group website.
What do you think of this BMW-inspired PC chassis?
Get notified when we go live!