Subject: Cases and Cooling | January 12, 2016 - 07:20 PM | Sebastian Peak
Tagged: small form factor, Silverstone, SFF case, mini-stx, Intel 5x5, enclosure, CES 2016, CES
SilverStone had an early enclosure on display at CES for the upcoming Mini-STX standard, the tiny form-factor introduced with Intel's "5x5" motherboard (which we first reported on almost exactly one year ago).
The simple black metal enclosure (as yet unnamed) looked and felt like a production unit, but we are still in the early stages with the first mini-STX motherboards being announced only this week. No details were given on when it would be available for purchase, or exactly how much it will cost.
It is interesting to note the enclosure's I/O, which should indicate the standard for the new motherboards. On the front panel we had openings for a standard USB and Type-C port, and 3.5 mm audio; around back there were two more USB ports, LAN, DisplayPort, and HDMI. To the left of the HDMI port you can see the power input for the external power supply, as mini-STX will have a lot in common with the thin mini-ITX standard. (Thin mini-ITX optionally supported internal PSUs, but given the space constraints it looks like the mini-STX boards will be using a laptop style power supply.)
The tiny Mini-STX enclosure fits easily in one hand
We will await any official announcement of this (and any other) upcoming mini-STX enclosure from SilverStone.
Subject: Cases and Cooling | May 4, 2015 - 01:33 AM | Tim Verry
Tagged: xigmatek, SFF case, SFF, nebula c, mini ITX
Looking for a cute and cuddly case? Xigmatek may have you covered with its latest Mini ITX-friendly Nebula C chassis which will soon be available in pink, purple, yellow, lime, and emerald colors.
Measuring 305 mm (H) x 260 mm (W) x 260mm (D) or roughly 12" x 10" x 10", the Nebula C has a SECC Steel frame paired with an ABS plastic exterior. There is a power button nestled in the top right corner, front I/O (two USB 3.0 and two audio ports) on the right side, and a triangular orange cutout in the bottom left corner for aesthetic reasons. Apart from that, the Nebula C is smooth plastic with little in the way of vents, logos, or other garnishments. Cooling is handled by a large passive mesh vent on the bottom of the case and a single 120mm fan on the rear panel. There is space for regular ATX power supplies, two expansion slots, and external water cooling radiators by way of two rubber grommets.
Internally, the Nebula C can hold a standard Mini ITX motherboard, a CPU heatsink up to 80mm tall, a full height graphics card up to 230mm in length, one 3.5" drive bay and one 2.5" bay. Using an adapter, you can fit a maximum of three 2.5" drives in this system. The support for ATX power supplies is nice to see as there are many more options in this space as well as better quality parts with lower noise at similar price points ( you would have to spend more money to get these features in a small form factor PSU where available).
Judging from Bit-Tech's review of the glossy white Nebula C, the case looks very easy to work with and the ability to remove all three side panels should make it easy to get at just about every bit of hardware without needing to take anything out of the case. They do note that cable management is a pain, and that a modular power supply is recommended. Since the motherboard is mounted on the bottom with the drive bays and PSU mounted above that, I can see how it could easy start to look like a rats nest in there if you don't plan ahead on this part of the build process. In all, it may be a worthy small form factor case if you have less than $100 and want something with a bit of color.
The refreshed Nebula C cases in pink, purple, lime, emerald, an yellow will be available soon. There is no official word on pricing or availability, but expect them to go for around $80 USD (if the glossy white version is any indication).
Subject: Cases and Cooling | March 8, 2015 - 06:17 AM | Tim Verry
Tagged: thin mini itx, SFF case, SFF, mini ITX, fanless, akasa
Akasa recently introduced two new fanless Mini ITX cases under its Euler brand. The new Euler T and Euler M are all aluminum enclosures that cool up to 35W processors passively using an aluminium heatsink and the case’s own surface area to dissipate heat.
Both cases are black with a brushed metal texture and “diamond edge” finish around the front panel. The top and sides of the small form factor cases use a fin array design that benefits the passive cooling feature. Front IO includes a circular power button and two USB 3.0 ports.
The Akasa Euler T chassis. The Euler M (not pictured) is slightly larger).
The Euler T represents a refinement of the existing Euler S chassis with support for three 2.5” drives. The case measures 245 x 215.5 x 68.5mm. It is built with Thin Mini ITX motherboards in mind. It can be paired with an optional external power supply up to 150W.
Akasa’s Euler M case is deeper measuring 245 x 274.5 x 68.5mm. The case supports regular sized desktop memory modules and Mini ITX motherboards. Thanks to its larger size, it supports four 2.5” drive bays. The Euler M has an internal DC-to-DC power adapter and can be paired with an optional external 80W power supply.
Subject: Cases and Cooling | October 15, 2014 - 04:49 AM | Tim Verry
Tagged: SFF case, SFF, mini ITX, micro ATX, aerocool
A Taiwanese company called Aerocool Advanced Technologies (with a US disivision known as Aerocool US) recently unboxed a cube-shaped computer case that is both colorful and practical. The new Xpredator Cube joins the existing Xpredator lineup as a small form factor (micro ATX or mini ITX) option that comes in Red, Black, Orange, White, and Green color options for $125.90.
Measuring 280x418x412mm, the Xpredator Cube has a futuristic design with lots of sharp angles. Large “shell like” adjustable vents align along the top of the case along with a storage compartment and the front Io panel. The front of the case is dominated by a large mesh intake vent with angled sides and a single 5.25” bay. The left side features a side panel window that shows off the top half of the case (motherboard area).
Front IO on the Xpredator Cube includes two USB 3.0 ports, two audio jacks, a power button, and two fan speed dials for the built in fan controller (maximum of 15W per channel).
The aesthetics are welcome, but the internals are where the small form factor cube shines. The new Xpredator series case is divided into two main compartments. A horizontal divider holds the horizontally mounted removable motherboard tray. The tray matches the external color of the case while the rest of the case internals (minus the tool-less drive rails) is black. It features a CPU cutout and multiple rubber grommets to facilitate cable routing. The case has four exposed PCI slots that can support graphics cards up to 320mm in length (or 345mm with the front case fan removed). The case can accommodate tower coolers up to 187mm tall or an internally mounted water cooling radiator up to 280mm (sans optical drive). Alternatively, the case has two water cooling grommets to support a larger external radiator.
Bundled cooling include a 200mm front intake fan (800 RPM, 53.4 CFM, 26.5dBA) and a single 140mm exhaust fan (1200 RPM, 5948 CFM, 27.6 dBA). From there, users can add up three additional 140mm fans. The top of the case has angled vents that can be opened or closed with a slider on the left edge.
The bottom half of the case has space for a vertically mounted power supply and a tool-less hard drive bay that can hold three 3.5” or 2.5” drives. The case has a vent on the right side of the case for the power supply fan along with a removable magnetic dust filter. In addition to the hard drive bay, users can fit two 2.5” solid state drives under the 5.25” bay.
Aerocool further includes rubber pads for the power supply and hard drives to reduce shock which is nice considering the LAN party readiness of this case.
The new case was not available for purchase at the time of writing, but it should be for sale soon with a MSRP of $125.90.
The Aerocool Xpredator Cube looks to be a nice looking, easy to build in case. I’m looking forward to the full reviews of course, but if it holds up to the specifications it should be a popular small form factor option!
Introduction, Specifications, and Packaging
Image credit: NCASE
The NCASE M1 Mini-ITX case has been lusted after for about a year now by those of us interested in small form-factor (SFF) computing, ever since it made the news last spring by making its initial goal on the crowd-funding site Indiegogo. The last campaign to raise funds ended in August of last year, and not leaving anything up to chance the creators of the M1 contracted none other than Lian Li to make their dream a reality. Today, we have the privilege of seeing the finished product!
Making things happen
We’ve all talked about changing some existing product to fix problems or just add features that we’d like to have. But most of us probably wouldn’t take our idea to a public funding site to actually make it happen, and that’s exactly why the story of NCASE and the M1 is unique. The creators were members on hardforums, and the original thread for the M1 is now well over 500 pages long.
The story began with conversation about improving an existing mini-ITX design, with the SilverStone SG05 the original topic. (It's fascinating to watch the design evolve on the thread!) Two forum members joined forces and started creating designs, and ended up with the blueprint for an incredibly small case that still supported large GPU's and 240mm radiators. Then, it was on to Indiegogo to see if the interest was high enough to get this case built.
Judging by the results starting with that initial round of prototype funding, there has definitely been interest in this design! Lian Li's prototype case was a success, and the initial production run funding campaign quickly raised more than double the goal again… Fast forward to spring 2014, a black M1 case was delivered safely, and I for one can’t wait to get started building up a system with it!
The M1 next to a BitFenix Prodigy: It's tiny!! (Image credit NCASE)
Subject: Systems | May 28, 2013 - 10:22 PM | Tim Verry
Tagged: SFF case, SFF, passive cooling, nimbus, heastink, fanless, cpu cooler, cirrus7
German PC manufacturer Cirrus7 has launched a new small form factor (SFF) PC called the Nimbus that uses slices of aluminum that do double duty as both a case and a passive CPU cooler (heatsink).
The Nimbus PC features an Intel DQ77KB motherboard and low-power Intel processor along with configurable DDR3 and mSATA storage options. The base model will come with 4GB of DDR3 and a 60GB mSATA SSD. CPU options include the Intel G1610T, G2020T, Core i3-3220T, i3-3470T, i5-3570T, and i7-3770T. From there you can add up to two 7mm 2.5” hard drives (or SSDs) and increase the amount of RAM (for a higher price, of course).
The Intel DQ77KB board supports vPro and KVM over IP on systems with the Core i5 or higher processor. It has the following external IO options:
- 4 x USB 3.0
- 4 x USB 2.0
- 2 x Intel Gigabit LAN
- 2 x Audio jacks (green jack is dual purpose, mini-TOSLink compatible)
- 1 x HDMI
- 1 x DisplayPort
The SFF PC comes preloaded with either Ubuntu 13.04, Ubuntu 12.04, or Windows 8 (depending on your choice at checkout).
Check out more photos of the Nimbus at FanlessTech.
In order to keep the hardware cool, Cirrus7 has opted for an all-aluminum enclosure that is built around and over the motherboard in a fin-spacer-fin pattern. Each aluminum fin is 12mm high and the height of the system can be varied by adding or reducing the number of fins used. For example, using all fins allows Cirrus7 to support higher TDPs like the Core i7 3770T. Alternatively, if you are just using an i3-3220T, you could get by with a smaller (and lighter) case/heatsink. Notably, judging by the hands-on photos over at FanlessTech, the Nimbus does not use a copper CPU block which may have reduce the heatsink's effectiveness. That, or maybe Cirrus7 expects that they have slapped enough aluminum fins on the system that it doesn't matter much (heh). Also note that the case is not completely sealed, so although it is passively cooled, it is definitely not water or dust proof. Beyond that though, the case looks nice and the system would make a nice silent backup server, router, or HTPC!
The Nimbus will be available towards the end of June in Germany and Europe, with worldwide shipping available upon request. The system starts at €499 for the base model which is approximately $640 USD (before shipping). That price includes the case, processor, motherboard, RAM, and mSATA drive. Cirrus 7 has stated that Haswell-based models of the Nimbus will be available at some point, but are not expected until around the end of 2013 at the earliest.
Introduction and Features
SilverStone has a long-standing reputation among PC enthusiasts for providing a full line of high quality enclosures, power supplies, cooling components, and accessories. In 2006, SilverStone introduced the Temjin TJ08, an impressive Micro-ATX tower case with dual 120mm cooling fans. It helped pioneer the idea of large tower cooling performance in a small package. Today, improved technology and the latest designs have enabled SilverStone engineers to create another innovative small tower case in the TJ08-Evolution with even better cooling performance than the original. The SilverStone TJ08-E is a premium enclosure designed specifically for SFF motherboards and features a beautiful black anodized aluminum front panel, excellent cooling performance, removable sides, top, and motherboard tray, and it packs a lot of storage capacity into a small tower chassis.
(Courtesy of SilverStone)
To improve cooling performance, a SilverStone "Air Penetrator" 180mm fan has been installed behind the front panel to create a virtual airflow tunnel through the chassis with positive air pressure. This is a two-speed fan with a small, easily accessible speed selector switch mounted around on the side of the front I/O panel. SilverStone claims that by designing the TJ08-E with the positive air pressure concept, it enables better cooling performance than traditional chassis but also helps to prevent dust from penetrating into the chassis by use of a large, easily accessible filter on the intake fan and forcing air out of the chassis through unfiltered openings. A standard ATX power supply can be installed in a dedicated compartment, which features a top mounted air intake grill covered by a magnetic dust filter.