GSkill Heard You Like Memory…

Subject: Memory | December 6, 2011 - 08:35 AM |
Tagged: x79, SB-E, Sandy Bridge E, Intel, gskill, DDR-3 2400, DDR-3, bulldozer, amd, am3+, 64 GB

So they are giving us as much, and as fast, as we could possibly handle.  GSkill has announced their latest Ripjaw-Z kits specifically aimed at the latest Intel Socket 2011 chips on the X79 platform.  These kits range from 4 x 8GB @ 2100 speeds with 1.5 v up to 8 x 8GB at 2400 speeds at 1.65 v.  For those wishing to push clock speeds up higher, they offer a 4 x 4GB kit at 2500 speeds at 1.65v as well.

64G_Red.jpg

Red is the new black.  This is what 32 GB of memory looks like now.

The past few months I have been using a few sets of GSkill memory with the latest Llano based chips from AMD.  These are 4 x 4 GB 1866 products that run at 1.5v, and they have been pretty phenomenal for me.  Now that we are moving into new CPU architectures from both manufacturers, memory speeds have become important again.  For quite some time people could easily get by with DDR-3 1333 modules and not experience any kind of performance bottleneck.  The reasons for this were due to CPU designs (quad core CPUs rarely required more than 12 GB/sec of bandwidth in most applications) as well as the non-integrated nature of graphics for the most part.

Read the full post here.

Source: GSkill

Gigabyte Infusing X79 Motherboards With 3D UEFI BIOS

Subject: Motherboards | November 6, 2011 - 01:11 PM |
Tagged: gigabyte, x79, pattsburg, Intel, SB-E, sandy bridge-e, uefi

Many motherboard manufacturers have phased out the old school BIOS in favor of a shiny graphical user interface (GUI) UEFI BIOS that adds support for booting from larger capacity hard drives and presenting configuration screens that are able to be navigated with mouse or touch controls. Gigabyte has been somewhat quiet on the UEFI BIOS front, until now that is. Starting with Intel’s new X79 chipset based motherboards, the company will begin using a new “3D BIOS.”

Gigabyte_3D_BIOS.jpg

Fortunately, red and cyan glasses won’t be required for Gigabyte’s new UEFI BIOS. Instead, the BIOS is only “3D” in the same sense that a computer game is 3D -- meaning a 3D perspective viewed through a 2D window of sorts (the monitor) and this is a good thing.

The way Gigabyte’s 3D BIOS works involves displaying a photo of the user’s motherboard with various hot-spots that display content sensitive information and configuration options when hovered over and clicked on respectively. For example, when hovering over and clicking on the SATA ports in the rotate-able photo of the board, users are presented with options to set the SATA controller mode to IDE, AHCI, or RAID mode. Also, when clicking on the CPU area, the user is able to adjust frequency, voltage, and timing settings for the CPU and RAM. Further, context sensitive help is available for all the various options in each dialog.

For those that prefer a more traditional text based approach, Gigabyte is also including an advanced mode for enthusiasts who like to dig into every setting possible. The advanced mode looks like one would expect a BIOS to - a text based UI with minimal distractions. The ability to use the mouse for navigation is still present, however.

The 3D motherboard will reflect the actual physical motherboard and can be easily rotated to admire the shiny interface. It is certainly an interesting angle and should help new users navigate and find the settings they need. Whether it will be enough to help differentiate the product or not remains to be seen. A video showing off the new 3D BIOS is available below, and more photos can be found here.

Source: Anandtech

EVGA Shows Off Drool Worthy Dual Xeon Sandy Bridge-E SR3 Motherboard

Subject: Motherboards | October 21, 2011 - 10:46 AM |
Tagged: xeon, x79, SB-E, sandy bridge-e, motherboard, Intel, evga

Jacob Freeman of EVGA Google + fame recently posted a teaser photo of a certain shiny piece of X79 chipset baked silicon in the form of a new SR3 Super Record series motherboard. This monster of a board is packed to the brim with features, and mid tower cases need not apply.

photo_black.jpg

Starting at the top of the board and working our way down, we are presented with not one but two socket 2011 Sandy Bridge-E Xeon processor sockets! One processor will have access to eight DDR3 DIMM slots while the other will have access to four DDR3 DIMM slots.  While the RAM configuration may seem odd, EVGA wanted to make the transition from the boards SR2 predecesor as easy as possible, by allowing users to transfer all 12, triple channel DIMMs to the new SR3 motherboard.  When all 12 RAM slots are populated, the board will run in triple channel mode, and when four or eight slots are populated, the motherboard will utilize the new quad channel interface.  The RAM will be fed power via a eight phase PWM (pulse width modulation) circuitry. The board also features two eight pin EPS and two six pin PCI-E connectors, and seven PCI-E 3.0 slots that are all capable of running at least PCI-E 3.0 x8 and four of them are capable of providing PCI-E 3.0 x16 bandwidth, more than enough for even the beefiest SLI setup.

On the storage and IO front, the SR3 motherboard has 14 SATA ports, HD Audio via six 3.5mm jacks, USB 3.0 ports (the total amount is unclear), and eSATA support.  The bottom right corner of the board lies a handy diagnostic screen to report error codes.  Further, the motherboard will come with the new UEFI BIOS.  Mr. Freeman states that the x79 motherboard is fully furnished with solid state capacitors from Sanyo (specifically POSCAP).

In short, this motherboard is a total beast. Please excuse me as I try to remove my jaw from the floor cartoon style.

Source: EVGA