Home
Sandforce

ASUS Adding RAIDR PCI-E SSDs To Its ROG Lineup

Subject: Storage | April 19, 2013 - 06:10 AM |
Tagged: trim, ssd, sandforce 2281, sandforce, ROG, raidr, raid, PCIe SSD, asus

ASUS is reportedly adding two new PCI-E Solid State Drives (SSD) to its Republic Of Gamers lineup. Dubbed RAIDR, the new PCI-E SSDs use 19nm Toshiba MLC NAND flash driven by two SandForce 2281 controllers. In turn, the two SandForce drives are put into a hardware RAID 0 configuration for maximum speed. The RAIDR SSD internals are encased in a stylized EMI shield along with a ROG-branded back-plate. In all, ASUS’ RAIDR SSDs measure 157 x 120 x 20mm.

Asus RAIDR PCI-E SSD.jpg

The ASUS RAIDR drives show up as a single disk driven by a standard AHCI controller, which allows the two RAID 0 SSDs connected via the PCI-E bus to be boot-able and support the TRIM command. Both RAIDR solid state drives also support Native Command Queuing (NCQ), SMART, Secure Erase, Windows 8 Secure Boot.

According to specifications provided by Sweclockers, ASUS is launching 120GB and 240GB versions of the PCI-E SSDs. Both capacities feature 100,000 IOPS, 128-bit AES encryption, and 620,000 MTBF ratings.

ASUS RAIDR PCI-E SSD Backplate.jpg

The 120GB RAIDR SSD supports up to 765MB/s sequential reads and 775MB/s sequential write speeds. On the other hand, the 240GB RAIDR drive supports up to 830MB/s sequential reads and 810MB/s sequential writes.

Additionally, ASUS is bundling its RAIDR drives with Kaspersky Antivirus 2013 and a number of ASUS utilities (including SSD TweakIt). The drives should be available sometime next month, but pricing is still unknown. Adding PCI-E SSDs is an interesting move by ASUS that should help the company diversify and expand its ROG branding. Personally, I’m looking forward to seeing how the drives stack up when they are released (and hopefully a PC Perspective review)!

Source: Sweclockers

OCZ Vertex 3.20 240GB Full Review - Vertex 3 Pushes 20nm Flash

Author:
Date: April 17, 2013
Subject: Storage
Manufacturer: OCZ Vertex 3.20 Product Page
Tagged: vertex 3.20, vertex, ssd, sandforce, ocz

Introduction, Specifications and Packaging

Introduction

A while back, we saw OCZ undergo a major restructuring. 150+ product SKUs were removed from their lineup, leaving a solid core group of products for the company to focus on. The Vertex and Agility lines were spared, and the Vector was introduced and well received by the community. With all of that product trimming, we were bound to see another release at some point:

ext-front.JPG

Today we see a branch from one of those tree limbs in the form of the Vertex 3.20. This is basically a Vertex 3, but with the 25nm IMFT Sync flash replaced by newer 20nm IMFT Sync flash. The drop to 20nm comes with a slight penalty in write endurance (3000 cycles, down from the 5000 rating of 25nm) for the gain of cheaper production cost (more dies per 300mm wafer).

imft 20 nm.jpg

IMFT has been cooking up 20nm flash for a while now, and it is becoming mature enough to enter the mainstream. The first entrant was Intel's own 335 Series, which debuted late last year. 20nm flash has no real groundbreaking improvements other than the reduced size, so the hope is that this shrink will translate to lower cost/GB to the end user. Let's see how the new Vertex shakes out.

Specifications:

  • Capacity: 120, 240GB
  • Sequential read:  550 MB/sec
  • Sequential write: 520 MB/sec
  • Random read IOPS (up to):  35 k-IOPS
  • Random write IOPS (up to):  65 k-IOPS

Packaging:

packaging.JPG

This simple plastic packaging does away with the 3.5" bracket previously included with all OCZ models.

Continue reading our review of the OCZ Vertex 3.20 240GB SSD!!

Need high volume SSD storage and can afford the price? Solidata has 2TB drives

Subject: Storage | March 18, 2013 - 04:23 PM |
Tagged: Solidata, K8 1920E 2TB, ssd, sf-1222, LSI, sandforce, Micron JMB393

We have seen some high capacity PCIe based SSDs but in the 2.5" form factor they have been few and far between.  This will soon change as Solidata will be releasing a 2 Terabyte SSD called the K8 1920E which will be somewhere in the neighbourhood of $5000 when it becomes available.  Each one of the flash storage chips you can see below is a 64GB chip and with 16 on each side you get a full 2048GB of storage.  It uses four of the LSI Sandforce SF-1222 controllers and a Micron JMB393 SATA II RAID-5 controller which is configured to act as a 4 port hub, treating each of the controllers as a separate 512GB SSD.  Once the SSD Review had formatted the drive for use there was a total of 1788GB available for storage which did not support TRIM as it is technically behind a RAID card.  The performance was on par with expectations, keeping in mind the difficulties that SandForce controllers have with incompressible data. This drive will be very expensive but it seems it will be the first product of its type available to be purchased.

SSDR_1920-PCB-Front.jpg

"Ever since SSDs were introduced to the retail market back in 07, one of the main complaints has always been capacity. After all, the first SSD releases were only 32 and 64GB. The hopes of one day seeing the performance of an SSD coupled with the capacity of a hard drive has grown and, too many, we think our analysis of the new Solidata K8-1920E 2TB SSD might be welcome news."

Here are some more Storage reviews from around the web:

Storage

Source: SSD Review

ADATA XPG SX900 128GB SSD Full Review - Low Cost SandForce

Author:
Date: February 6, 2013
Subject: Storage
Manufacturer: ADATA XPG SX900 Product Page
Tagged: sx900, ssd, sandforce, adata

Introduction, Specifications and Packaging

Introduction

With newer and faster SSDs coming to market, we should not forget those capable controllers of yesteryear. There are plenty of folks out there cranking out products based on controllers that were until very recently the king of the hill. Competition is great for the market, and newer product launches have driven down the cost of the older SandForce 2281 SATA 6Gb/sec controller. ADATA makes a product based on this controller, and it's high time we gave it a look:

130205-221436-4.13.jpg

The ADATA XPG SX900 launched mid last year, and was ADATA's first crack at the eXtended capacity variant of the SandForce firmware. This traded off some of the spare area in the interest of more capacity for the consumer.

Read on for the full review!

Intel Launches New 335 Series SSD In 180GB Capacity

Subject: Storage | February 5, 2013 - 03:16 AM |
Tagged: ssd, SandForce SF-2281, sandforce, mlc, intel 335, Intel

Intel has added a new drive to its existing 335 SSD series. The new drive offers up 180GB of storage, but maintains the same level of read and write performance as its larger 240GB sibling.

Intel 335 Series 180GB SSD.jpg

The 180GB version uses 20nm MLC NAND flash paired with a SandForce SF-2281 controller. According to the Intel-provided spec sheet (PDF), the new drive is capable of sustained read and write speeds of 500 MB/s and 450 MB/s respectively. Further, the drive maxes out at 42,000 random read IOPS and 52,000 random write IOPS.

The drive will come in the 2.5” form factor, but is 9.5mm thick (meaning it will not work in all notebooks). Reportedly, Intel has redesigned the casing to include a schematic/blueprint graphic alongside the Intel logo.

Intel rates the 180GB 335 series SSD at 1.2 million MTBF and is warranted for three years. The drive can currently be found online for around $180, making it right around the $1/GB mark. Interestingly, the larger 240GB model is currently retailing for around $195. Therefore, if you can spare the extra $15, the 240GB model is the better deal.

Source: Intel

Sandisk's Extreme 240GB, not the fastest but certainly the lowest in power consumption

Subject: Storage | November 6, 2012 - 12:15 AM |
Tagged: sandisk, 240gb, toggle NAND, SF-2181, sandforce, Extreme 240GB

SanDisk has been taking advantage of their long experience in the flash memory market to develop a line of SSDs which, apart from the controller, are all made in house.  That way they only have to license a controller, in this case SandForce's 2181, avoiding the costs of developing and improving their own controller.  The cost might be a bit high at $215 when you compare it to some of the deals currently available on the previous generation of SSDs.  [H]ard|OCP saw better performance than they expected from the older SF-2181 but still not to the level of the current generation of controllers.  What helped make this particular drive more attractive was the Toolkit which makes updating your firmware quite easy and remarkably low power consumption.

H_sandiskX.jpg

"The SanDisk Extreme 240GB is SanDisk's SandForce-powered SSD. Featuring Toggle Mode NAND and the SF-2181 with the latest firmware we give the SanDisk Extreme a spin. How does it stand up to its enthusiast competitors in terms of steady state and out of the box performance?"

Here are some more Storage reviews from around the web:

Storage

Source: [H]ard|OCP

The SandForce powered Corsair GT 240GB is a sweet deal

Subject: Storage | August 7, 2012 - 03:15 PM |
Tagged: Force GT 240 GB, ssd, corsair, sandforce, SF-2282

The Corsair Force lineup uses different controllers on different models so it can be very important to do a bit of research before you purchase one.  The Force GT 240GB that [H]ard|OCP reviewed uses the SandForce SF-2282 controller and clocks in at under $1/GB and with the current deal it is only $0.73/GB.  Part of [H]'s testing of these drives now includes the AS SSD test, which is particularly hard on SandForce base SSDs as it utilizes non-compressible data, however this SSD still kept up with the competition and sometimes surpassed them.  Check out the full review for the whole story.

H_forcegt240.jpg

"We are reviewing the Corsair Force GT 240GB SSD. Corsair provides enthusiasts with both sides of the SSD controller coin by offering Marvell and SandForce controlled SSDs in its product lines. Today we will take a look at the SandForce option with its SandForce SF-2282 controller paired with high-performance IMFT synchronous NAND."

Here are some more Storage reviews from around the web:

Storage

Source: [H]ard|OCP

MSI Possibly Working on SandForce SF-2000-series SSD

Subject: Storage | July 14, 2012 - 07:43 AM |
Tagged: storage, ssd, SF2000, sandforce, msi

The solid state market is heating up as spindle-based drives continue to sell at much higher prices than last year and NAND flash is getting cheaper. The latest entrant may be motherboard and laptop vendor MSI, if a recent addition to SandForce’s SSD partner list holds true.

msi_ssd.jpg

Unfortunately, we do not have any further details so it’s hard to say what sort of drive this will be other than it will use solid state NAND flash. Being a 2000-series SandForce controller is promising for performance, however. Stay tuned for more details as they develop. I’m excited to see what MSI can bring to the SSD table, and here’s hoping that they break a cost/GB record (I can dream heh). For now though, we will have to suffice with the currently available SSD options, which you can check out on our SSD Decoder at pcper.com/ssd. What do you think about the prospect of an MSI SSD?

Source: SandForce

LSI Demo Shows SandForce SF-2000 Series Driving Toshiba 19nm and IMFT 20nm Flash

Subject: Storage | June 4, 2012 - 06:00 PM |
Tagged: computex, SF-2000, sandforce, LSI, flash

As some of you may already be aware, SandForce was acquired by LSI back in January of this year. SandForce has made a very popular SSD controller for some time now and was the first maker to demo a controller driving 25nm flash (last year). Now SandForce (under LSI) has done it once again. This time with the same type of controller driving both 19nm Toshiba and 20nm Micron (IMFT) flash memory types:

LSI-SandForce-Intel-Board-.jpg

LSI-SandForce-Toshiba-Board-.jpg

The release from LSI reports the controller supporting all six flash vendors, giving some serious flexibiltiy to makers of flash memory systems and products. Aside from a confirmation of the ability to drive newer flash memory types, the remainder of the specs appear largely the same, minus some additional tweaks to ECC necessary to support increased error rates encountered as dies shrink.

Full press release from LSI after the break:

Source: LSI / SandForce information page

Comay's Venus line of SSDs is designed for paranoid techs

Subject: Storage | May 24, 2012 - 01:14 PM |
Tagged: ssd, comay, ups, sandforce, SandForce SF-2281

The Comay Venus Pro 3 comes in seven sizes, ranging from 30GB to 480GB and is powered by a SandForce 2281 controller.  Those specs are not very unique, what makes the Comay special is the super-capacitor on the PCB which ensures that no data will be lost in the event of a power outage.  It is not quite a UPS in the normal sense but it will provide power for long enough to ensure all data is written from the cache to disk before it powers down.  As well there is onboard overload protection to ensure that power spikes cannot damage your drives.  Both of these features are sought after by Enterprise clients, almost more so than the performance, which you can read about at SSD Reviews.

SSDR_Comay.jpg

"Just over a month ago, we conducted an analysis of what we thought to be the Comay Venus Pro 3 and, only after the review, were informed that we were actually looking at the Venus 3, an SSD that was not only branded incorrectly, but was also a special configuration for a specific customer. It appears our orders were mixed up. Comay apologized for the mix up and promised that we would be receiving a Venus Pro 3 soon enough where we could validate some vicious ‘SandForce Driven’ performance first hand."

Here are some more Storage reviews from around the web:

Storage

 

Source: SSD Review

PC Perspective
Upcoming Events
  • 6/19 @ 7:00pm PDT / 10:00pm EDT
    PC Perspective Podcast
  • 6/20 @ 6:00pm PDT / 9:00pm EDT
    This Week in Computer Hardware