Subject: Networking | April 13, 2015 - 03:52 PM | Scott Michaud
Tagged: asus, router, 802.11ac, rt-a66r, rt-a66u
Until recently, we have been using a Linksys WRT54G. No, not the WRT54GL. We have been using the cheap, $30 v8.0 unit with 8MB of RAM. Since it has been eight years since its manufacturing date, and about the same length of time since it received a firmware upgrade, we decided to upgrade to a newer model. After searching for a while, we settled on the ASUS RT-AC66. We bought it from a retail store, because it was the same price and I could get it the same day without paying for shipping, so our model has an “R” suffix, rather than the direct-from-ASUS “U”. The units are identical besides the model name though.
We are using the stock ASUS firmware.
So what has happened in the last half-dozen years? First, this device has quite a few more features than the Linksys, although not many are applicable to me personally. The most interesting to me is that ASUS offers a dynamic DNS service for their routers. It seems pretty straight-forward honestly. I was looking for a place to register, but it seems like it was just a matter of inputting the desired URL into the router, and ASUS will give it to you if it is available. I was able to use the subdomain within a few minutes too, although I did not try doing much with it.
Its 2.4 GHz range is pretty good too, much wider than the WRT54G. The 5.0 GHz makes it from the basement to the TV on the main floor. It reports less than full signal, but I have nothing to compare that with (neither a second 5.0 GHz device nor another 5.0GHz router). The antenna are detachable and higher sensitive versions are available, which is probably good for edge cases, although the default ones seem to work fine for me.
It definitely seems like a good router. I don't feel it getting in-between me and my internet connection. This is not a review though, just my impressions after using it for a bit.
Subject: General Tech, Networking | January 6, 2015 - 07:30 AM | Scott Michaud
Tagged: tp-link, router, ces 2015, CES, archer, 802.11ac
While yesterday's TP-LINK Archer C2600 and C3200 routers were designed for multiple devices, this one seems a bit more targeted at fewer, but still high-performance connections. The TP-LINK Archer C9 router can operate on one, 5 GHz block and one, 2.4 GHz chunk at the same time (versus the two 5.0 GHz and one 2.4 GHz distribution of the C3200).
A bit more specifications have been released, compared to the C2600 and C3200. A 1GHz, dual-core processor will perform the back-end computation to send the data where it needs to go. It will also have one USB 3.0 port (side) and one USB 2.0 port (rear), which are used to network-attach printers and storage.
The TP-LINK Archer C9 AC1900 dual band router is available now for $169.99 USD.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech, Networking | January 5, 2015 - 07:35 AM | Scott Michaud
Tagged: tp-link, router, ces 2015, CES, 802.11ac
At some point, routers have stopped becoming a pure commodity device. Some manufacturers are differentiating themselves based on CPU performance or available RAM, while others compete on software features. In this case, TP-LINK is introducing two routers: one with four antennas, and the other with six. They are both designed around connection quality for multiple devices that are communicating simultaneously.
TP-LINK Archer C2600
The Archer C2600 is the four-antenna product that uses Qualcomm MU-MIMO EFX, which can connect to three devices at once. TP-LINK states that the platform can establish four connections, but they are reserving the fourth to assist the other three by somehow reducing interference. They do not provide details about their specific process (whether it's constructive interference, choose the best signal, etc.) and I do not have a deep understanding of practical implementations in this area.
TP-LINK Archer C3200
The Archer C3200 is the six-antenna SKU that can operate on three bands simultaneously. Rather than sharing a single chunk of the 5.0 GHz spectrum, or dropping some devices down to 2.4 GHz, it can manage two segments of 5.0 GHz simultaneously (and a third at 2.4 GHz). As the number of connected devices increase, the router will automatically assign them to the best block.
Both routers also include Gigabit Ethernet for wired networks, and USB 3.0 ports (they do not state how many) to attach storage to. The C3200 advertises “Substantial RAM” without providing any hard numbers.
No pricing information is currently provided, but they are expected to be available in Q3 2015.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | December 23, 2014 - 12:01 PM | Sebastian Peak
Tagged: router, nighthawk x6, netgear, DSLR, Canon, 10 days of christmas
Are you still hunting for that perfect gift for the hardware and technology fan in your life? Or maybe you are looking for recommendations to give to your friends and family about what to buy for YOU? Or maybe you just want something new and cool to play with over the break? Welcome to PC Perspective's 10 Days of Christmas where we will suggest a new item each day for you to consider. Enjoy!
The staff here at PC Perspective couldn't decide on a final item for our 10 days series. We decided to do a post with two items to end with a bang (and extreme indecisiveness). Then, just before the post went live, one of the items was no longer available in the bundle that we considered a good deal. Thanks, universe, for stepping in and making us declare a single best deal... of the day. Our final recommendation is: a high-performance router!
Netgear Nighthawk X6 AC3200 Router
This tri-band, 6-antenna monster that is the Netgear Nighthawk X6 looks the part, and offers up to 3.2 Gbps performance from its three Wi-Fi data streams (one 600 Mb/s 2.4 GHz network and dual 1300 Mb/s 5 GHz networks). It's powered by a dual-core 1 GHz CPU with 256 MB of RAM, has the usual 4-port Gigabit switch, and offers both USB 2.0 and 3.0 ports on the back. It's an impressive piece of hardware with a price to match, just under $300.
If you are having trouble picking out a gift for a loved one, consider buying an Amazon.com gift card! Amazon has basically every product on the planet for your gift recipient to order and purchasing gift cards through these links directly sponsors and supports PC Perspective! And hey, if you were to buy gift cards for yourself to do your own Amazon-based Christmas shopping...that wouldn't exactly be a bad thing for us either! ;)
Did you miss any of our other PCPer 10 Days of Christmas posts?
Day 1: Google Nexus 7 Tablet
Day 3: Intel Core i7-4790K
Day 4: Google Chromecast
Day 7: Amazon Kindle
Subject: Networking | March 12, 2014 - 07:56 PM | Tim Verry
Tagged: router, trendnet, gigabit router, gigabit ethernet, ac1900, 802.11ac, 256 qam, networking
Trendnet has launched a new 802.11ac wireless router called the TEW-919DRU. The new dual band router supports speeds up to 1300 Mbps on the 802.11ac network and 600 Mbps on the 2.4GB 802.11n network.
The router is powered by an undisclosed ARM chip clocked at 1GHz and uses six internal 6 dBi antennas along with beamforming technology to increase stability and range. Trendnet includes five RJ-45 Gigabit Ethernet ports (four LAN, one WAN), one USB 3.0 port, and one USB 2.0 port. Users can simultaneously run an 802.11ac Wi-Fi network and an 802.11n Wi-Fi network. Further, users can add an additional guest Wi-Fi network on each 2.4GHz and 5GHz band as well as multiple SSIDs.
Trendnet also touts that the TEW-818DRU comes with a pre-encrypted Wi-Fi network that is setup out of the box with strong encryption; which is a great feature to see. Unfortunately, the benefits of the out-of-the-box Wi-Fi encryption is undermined by the default support of WPS (Wi-Fi Protected Setup) which has been shown to be insecure. Hopefully new firmware will make WPS opt-in rather than opt-out (if it is indeed possible to truly disable on this model) to get the security nod.
The new 'AC1900' TEW-818DRU wireless router will be available this month with an MSRP of $259.99 and 3 year manufacturer warranty.
Subject: General Tech | February 19, 2014 - 12:33 PM | Jeremy Hellstrom
Tagged: security, router, TheMoon
A worm known as TheMoon has been in the news recently but the actual infection of Linksys routers has likely been spreading for quite a while now. You may have also read about the backdoor on Linksys/Cisco and Netgear routers which as been open for almost a decade and can be as simple as connecting to port 8083 if you can get direct access to the router. Some of these vulnerabilities can be mitigated by turning off remote administration and uPNP services but it seems your consumer level router is still a huge security risk. Your best bet is to spend a weekend and follow the advice of most Slashdot commentators; flash your router with OpenWRT or a version of Tomato and you will have better security and control over your router. Just don't do it to the modem your ISP provided you with.
"The remote-access management flaw that allowed TheMoon worm to thrive on Linksys routers is far from the only vulnerability in that particular brand of hardware, though it might be simpler to call all home-based wireless routers gaping holes of insecurity than to list all the flaws in those of just one vendor. An even longer list of Linksys (and Cisco and Netgear) routers were identified in January as having a backdoor built into the original versions of their firmware in 2005 and never taken out."
Here is some more Tech News from around the web:
- Oops: Security Holes In Belkin Home Automation Gear @ Slashdot
- Intel unveils Xeon E7 v2 for data centres with focus on data analytics @ The Inquirer
- Ignore the pie-in-the-sky storage roadmaps. This is what's REALLY afoot @ The Register
- How NOT to evaluate hard disk reliability: Backblaze vs world+dog @ The Register
- How to Operate Your Spycams with ZoneMinder on Linux (part 1) @ Linux.com
Subject: Storage, Shows and Expos | January 8, 2014 - 01:20 AM | Allyn Malventano
Tagged: western digital, wdc, WD, router, linksys, CES 2014, CES, 802.11ac
Last night at the PEPCOM Digital Experience, we swung by Western Digital's booth. While there are no new launches at CES, it's always nice to see the full spread all laid out on display:
4TB Green and Black, 1TB Blue, Ultra Slim drives, and of course the Black2.
The other table shifts to backup and external storage, scaling up through the My Cloud to the larger EX4.
My eye was also caught by the behemoth of a router that is the Linksys WRT1900AC!
This beast is way more than an evolution on the old WRT54G. While there are four antennas, the dual band Marvell radios are only 3x3 capable. They can, however, choose among the four antennas to achieve the best possible throughput. The '1900' rating comes from 1300Mbps (5GHz) + 600Mbps (2.4GHz). This router will be Open-WRT capable out of the box, so you can expect the folks like DD-WRT and Tomato to have usable firmware built very shortly after launch, which is expected sometime around April of this year. Let's check out the ports:
Not only is there USB3, but we also have eSATA for even faster connectivity. Throughput to connected storage should be stellar as the on-board CPU will be a 1.2 GHz dual core ARM. Radios and CPU will be cooled by a built-in fan, and Linksys also noted they will be launching an 8 port Gigabit switch in a matching (and stackable) form factor. Open source firmware buff tech note: 128MB Flash, 256MB RAM. MSRP: $299.
Follow all of our coverage of the show at http://pcper.com/ces!
Some computer components get all the glory. Your normal lineup of FPS crushing GPU’s, Handbrake dominating CPU’s, and super-fast Memory end up with most of the headlines. Yet behind the scenes, there are some computer components we use that are pivotal in our use and enjoyment of computers and receive very little fanfare. Without networking we wouldn’t have file sharing, LAN parties or even the Internet itself. Without routers and network adapters, we wouldn’t have networking.
ASUS recently sent a whole slew of networking components our way and we’ve decided to take them for a spin and see if they’re worth your hard earned dollars. Our box of ASUS goodies included:
- ASUS RT-N66U Gigabit Router – Dual Band Wireless-N900
- ASUS PCE-N10 - Wireless N PCI-E Adapter Wireless-N
- ASUS PCE-N15 - Wireless N PCI-E Adapter Wireless-N
- ASUS USB-N53 - Dual Band Wireless N Adapter
- ASUS USB-N66 - Dual Band Wireless-N900 Adapter
Without further ado, let’s jump in and tackle each one.
ASUS RT-N66U Gigabit Router – Dual Band Wireless-N900
Routers are one of those components that most of us don’t really think about unless something goes horribly wrong. Most people will buy one they find on a big box store shelf (or even worse, just use their ISP’s router), pull it out of the box, plug a few cables into it and then forget about it in a closet for a few years.
A few weeks ago I witnessed a technology demo by Western Digital. I arrived expecting to see something storage related, but what I saw was completely different - a new line of routers!
The new 'My Net' series of Western Digital routers are intended to cover the mid to high end of the home usage spectrum. Models start with 4 ports of Fast Ethernet and scale all the way up to 7x GigE switching. All models support some form of simultaneous dual band (2.4 and 5 GHz), with a minimum of 2x2 and scaling up to 3x3 configurations (more detail / explanation on that later).
Subject: Networking | May 16, 2012 - 09:57 PM | Tim Verry
Tagged: wifi, router, networking, netgear, 802.11ac
Following up on the announcement by Buffalo Technology, Netgear has released their own 802.11ac wireless router, the R6300. (PC Perspective recently ran a giveaway for the R6300 which you can read about here). In addition to the flagship 802.11ac router, Netgear announced a slimmed down version–the R6200–and the A6200 WiFi USB dongle.
The Netgear R6300 is their highest end wireless router supporting the 802.11ac WiFi standard. It supports 802.11ac speeds up to 1300 Mbps (450 Mbps over wireless n) and is backwards compatible with the 802.11 a/b/g/n standards. It also has two USB 2.0 ports that can be used to share hard drive and printers across the network. Further, the “5G WiFI” router is powered by a Broadcom chipset, which should open the door to third part firmware(s).
In addition to the above router, Netgear has announced the R6200 wireless router. It is compatible with the upcoming 802.11ac standard, but at reduced speeds. It features approximately 900 Mbps transfer rates over the “ac” standard and up to 300 Mbps over the 802.11n standard. The router is backwards compatible with all the older consumer standards (a/b/g/n), and it features a single USB 2.0 port to share a printer or hard drive to computers on the LAN.
Last up in the announcement is the Netgear A6200. This device is a USB WiFi dongle that supports the 802.11ac standard as well as existing a/b/g/n networks. It claims to deliver enough speed for HD streaming of videos, though Netgear has not stated if it will be able to take advantage of the full 1300 Mbps theoretical maximum connection. The WiFi adapter features a swiveling antenna and a docking station for use with desktop systems.
The other neat feature that the new routers support is the Netgear Genie application, which allows users to monitor and control the network using an application on their computer or smartphone (iOS and Android). They also feature Netgear MyMedia, printer sharing, guest network access, a DLNA server, parental controls, and automatic WiFi security.
The Netgear R6300 router is available for purchase now with an MSRP of $199.99. The R6200 router and A6200 WiFi dongle will be available for purchase in Q3 2012 with suggested retail prices of $179.99 and $69.99 respectively.