Subject: General Tech | April 16, 2012 - 11:27 PM | Tim Verry
Tagged: Raspberry Pi, htpc
The UK charity behind the little computer that could -- The Raspberry Pi Foundation -- announced on Sunday that their Raspberry Pi computers are [finally!] shipping out to customers that pre-ordered the Model B boards. Creator Eben Upton hand delivered the first batch of Raspberry Pi computers to distributor RS Components in Corby which you can see in the video embedded below.
Some users have already reported receiving their boards, and the charity is starting to hold lectures and classes for students in the UK using the Raspberry Pi computers. In other good news, serial production of the Raspberry Pi computers has begun at the factories which means that the backlog of pre-orders should now be taken care of faster than previously estimated by RS and Farnell. More specific estimates on when you should be getting your Raspberry Pi should be provided to you later int he week from the distributor you ordered from.
I have yet to receive any e-mail from Farnell on the status of my Raspberry Pi since the first order verification email so I have a feeling I’m at the end of the line but at least they are shipping now and I’ll have some testing to do shorty!
Subject: General Tech, Systems | April 8, 2012 - 08:38 PM | Tim Verry
Tagged: Raspberry Pi, pcb, emc test, computer, compliance testing, arm
The highly anticipated Raspberry Pi ARM computer has run into several launch hiccups, the most recent being that the distributors -- RS and Farnell -- refused to sell and ship the devices without the Raspberry Pi passing the proper electromagnetic interference testing. While such certification is not required for Arduino or Beagle Boards, the companies stated that because the Raspberry Pi was (more) likely to be used as a final consumer product (and not a development board) it needed to obtain and pass EMC testing to ensure that it would not interfere with (or be interfered by) other electronic devices.
According to a recent blog post by the charity behind the ARM powered Linux computer, the Raspberry Pi has passed the EMC compliance testing with flying colors -- after a few hiccups with a network hub used to test the Raspberry Pi while it was being hit with an EM field were sorted out.
The team has been working out of Panasonic’s facility in South Wales to test the Raspberry Pi. Due to having the lab area for a whole week, they managed to knock out consumer product inference testing for several other countries as well. Mainly, the Raspberry Pi is now compliant with the UK CE requirements, the United States’ FCC, Australia’s CTick, and Canada’s Technical Acceptance Certificate (TAC).
Assuming the paper work is properly filed and RS and Farnell accept the certifications, the Raspberry Pi units should begin winging their way to customers shortly. Are you still waiting on your Raspberry Pi, and if so have you decided what you intend to use it for yet?
If you are interested in the Raspberry Pi, be sure to check out some of our other coverage of the little ARM computer!
Subject: General Tech, Systems, Mobile | March 30, 2012 - 02:29 AM | Scott Michaud
Tagged: Raspberry Pi
Raspberry Pi has been further delayed while it acquires an additional certification to conform to British Law. The delay affects all regions because the products are shipped to the UK before being distributed internationally. The delay is expected to last just a couple of weeks.
It has almost been a year since the first announcement of the Raspberry Pi ultra-cheap PC and we can almost taste its arrival. Originally inspired by David Braben, developer of games such as Rollercoaster Tycoon, the Raspberry Pi was built to cheaply enable students to learn computing.
As it turns out, the cost and performance of the device drew massive attention from the hobbyist and home theatre crowd. All interested parties will need to wait, however, as the product has been briefly delayed again because someone forgot to cross their t’s.
C’mon, almost there, almost there.
All joking aside, the delay is quite small and minor and will still ship within their original target window. The delay was caused by the foundation failing to be granted a Conformité Européenne (CE) mark for their product. The CE certification is the direct analogy to the FCC’s electromagnetic (EM) noise certification which must be obtained for cellphones and other electronic devices in the United States. CE certification is expected to take just a couple of weeks.
Delivering a product is an involved task. I am willing to give the foundation a pass on this specific delay due to their lack of experience in their field. That is unless of course the product is found to interfere with EM broadcasts of some protected frequency. That -- would suck.
Then again, I have also not attempted to order a Raspberry Pi so perhaps my opinion is invalid. What do you think?
Subject: Cases and Cooling | March 21, 2012 - 10:41 PM | Tim Verry
Tagged: Raspberry Pi, case, 3d printing
The Raspberry Pi Foundation recently released their ARM powered Linux computer; however, the accompanying case will not be available until later this year. As a result, many enthusiasts are stepping up to the plate to design and fabricate cases of their own for the Raspberry Pi board. Previously, Marco Alici designed a white case with Raspberry Pi logo that could be produced using injection molding techniques (or 3D printers). Now, a new site called Mod My Pi has emerged to offer modders some alternative cases along with start up kits full of all the accessories people need to get their Raspberry Pi board up and running.
Based in the UK, the Raspberry Pi enthusiasts are employing 3D printing technology to produce customizable cases based on ABS Plastic. Further, they are offering up a variety of color choices including blue, red, green, black, and white. Customers can choose two colors to mix an match, one for the top of the case and another for the bottom. The cases are form fitting and are designed to be dust and water resistant. They come as two parts that snap together to nestle the Raspberry Pi board safely. The bottom and side opposite the Ethernet jack provide plenty of vent holes to keep the board from overheating.
If you have a design idea including a specific color or specific logo that you would like to incorporate into your Raspberry Pi case, Mod My Pi has stated that it is willing to work with customers to allow customization of cases to make them even more personalized.
The cases are currently up for pre-order, but are set to begin shipping via First Class Royal Mail for UK orders or through Royal Mail Airmail Small Packets for International orders. Shipping prices will be £1.99 for both UK and International orders, though International orders will naturally take a bit longer to arrive.
In addition to cases, Mod My Pi has put together a start up kit for those in the UK to complement the Raspberry Pi that includes everything a user will need to get the ARM computer up and running, except a display of course. The kit features a Raspberry Pi case, an 8 GB SD card with Debian Linux distribution, small wireless keyboard, wireless mouse, powered 7 port USB 2.0 hub, USB Wi-Fi dongle, USB card reader, 5 V 1000mA UK AC power adapter, micro USB to USB cable, RCA video and audio cables, HDMI cable, and Ethernet cable.
The setup kit is priced at £64.99 including VAT taxes and has a UK only shipping price of £4.99.
Even better, Mod My Pi is donating 5% of all sales of cases, and all profits from Mod My Pi stickers to the official Raspberry Pi Foundation (the charity behind the Raspberry Pi computer). Have you received your Raspberry Pi pre-orders yet? What will you be using for a case, will you be DIYing your own, or will you going with someone else's design? On an unrelated note, there is so much Raspberry Pi in this news post, that I'm getting pretty hungry!
More Raspberry Pi reading:
- Raspberry Pi boards sees manufacturing delay
- Fedora Remix on the Raspberry Pi
- Raspberry Pi has fast GPU, can decode H.264 HD video like a champ
- Raspberry Pi Operating Systems (Official Downloads)
Subject: Systems | March 10, 2012 - 10:30 AM | Tim Verry
Tagged: Raspberry Pi, linux, computers, arm
It seems that not all is sweets (pie, of course) and celebration for the folks over at the Raspberry Pi Foundation, as the initial batch of their ARM powered Linux computers have experienced what the charity has dubbed a “hiccup” at the manufacturing stage. It seems that while they specified magnetic jacks in the design materials, the wrong RJ45 network jacks for the boards were soldered on accidentally by the Chinese factory. According to the Raspberry Pi Foundation, the dud jacks in question were the result of the manufacturer using non magnetic jacks instead of RJ45 connectors with integrated magnetic connections. They further stated that they had been aware of the problem for four days prior to the announcement, but needed to “do some further tests to make sure nothing else was affected.”
They are currently sourcing the proper network jacks, and are receiving help from their manufacturing and distribution partners RS Components and Premier Farnell. It is not all bad news; however, as it seems they caught the issue quickly enough to maintain the release schedule for the initial batch of Raspberry Pi boards. The issue is a relatively minor one that is easily rectified by desoldering the dud jacks and soldering on the new ones with integrated magnetics. The manufacturing factory is nearly finished with the replacement on the initial batch and they expect the boards to get out to consumers on time. The less than ideal news is that, there may be a slight delay for those waiting on pre-orders of boards outside of the initial batch as they are still trying to source enough networking jacks as mentioned above.
'We are very, very sorry.” they stated in the blog post. In the end, they believe it to be a mere small bump in the road and have promised to keep users updated on the manufacturing status of the eagerly awaited Raspberry Pi computers. More information along with X-rays of the dud networking jacks can be found on their blog.
Subject: Systems | March 10, 2012 - 12:52 AM | Tim Verry
Tagged: Raspberry Pi, OS, linux
The Raspberry Pi Foundation has quite the success on their hands with the small ARM powered Linux computer they have dubbed the Raspberry Pi. With pre-orders that sold out within hours, a great deal of press coverage, and overwhelming support from the community to support the Raspberry Pi with software and download mirrors, they have announced not only the promised Fedora 14 Remix Linux distribution, but OpenELEC XBMC support and an Arch Linux distro for power users.
So far, the charity has released the Fedora 14 Remix, Debian Squeeze, and Arch Linux distributions. All three are now available for download via their downloads page using either Torrent files or HTTP downloads through the community mirrors.
The Fedora Remix Distro
The Debian Squeeze OS is the Raspberry Pi's reference file system and is aimed at software developers while the Fedora Remix is aimed at those wanting a casual OS that is capable of playing back multimedia content. Finally, the Arch Linux distro is aimed at power users and Linux enthusiasts that want to totally customize their Linux operating system and the software including with it. These distros are meant to be installed on an SD card and then inserted into the Raspberry Pi.
Head on over to their downloads page to get your hands on the distros!
Subject: Cases and Cooling | March 7, 2012 - 04:58 PM | Tim Verry
Tagged: Raspberry Pi, cases, computing, 3d printing
Marco Alici is not only eagerly awaiting his Raspberry Pi computer, but he is so excited that he has already started mocking up a case for it using Blender software and basic measurements of the Raspberry Pi board.
The case is a form fitting white plastic affair that has cutouts for each of the ports and an etched Raspberry Pi logo on the top. He states that because the Raspberry Pi has been designed to be as low cost as possible, the placement of connectors on the PCB makes for a less than ideal case. The RCA jack in particular juts out quite a bit from the casing, for example. Also the Raspberry Pi PCB does not have mounting holes to make attaching the case easy; Mr Alici had to come up with a snap-fit assembly to get around that issue.
The renderings of the case were made using Blender and Yafaray. He says that he is still waiting on his physical Rasberry Pi board to finalize the design and make it available for 3D printing at Shapeways. The case further is able to be constructed using injection molding, which he says makes for a cheap to produce case. More photos are available here. Now, if only I had a 3D printer!
Subject: Systems, Mobile | February 29, 2012 - 05:18 PM | Tim Verry
Tagged: Raspberry Pi, mobile, linux, hdmi, computer
The Raspberry Pi Foundation announced yesterday that their little Linux computer would be launching in the early hours of the morning today. Instead of the original plan of Raspberry Pi handling the pre-orders and shipping them from the UK, they ended up partnering with RS Components and Premier Farnell to handle all their orders and distribute them to customers. The non profit foundation states that this move will save customers money on shipping as the two companies have distribution centers worldwide and they will be able to get more boards out because they will be able to sell enough boards to meet demand.
Today, RS and Farnell were offering up the Model B Raspberry Pi boards for pre-order, and the first 5,000 orders from each company will receive their Raspberry Pi boards from the initial 10,000 unit batch. Surprisingly, the two companies' servers were getting hit extremely hard earlier today and it was almost impossible to not see at least a couple error pages requiring a painfully long refresh. According to the article, the Raspberry Pi computer sold out "within hours." Even though the initial batch of boards is spoken for, customers can continue to pre-order boards that will be delivered as soon as the next batch has finished production. Those unlucky enough to miss the first 10,000 aren't completely out of luck; however, as it is rumored that production of more boards should be getting underway and have an estimated delivery date a bit more than a month away. How true that is, remains to be seen however.
Personally, I managed to snag one of the first Raspberry Pi boards from Farnell Export, but it was an order fraught with error pages and being uncertain just how many I ordered as the confirm order page kept error-ing out. Luckily, I received an email from them confirming my order of a single Raspberry Pi and am now eagerly waiting for it to arrive. The last estimated delivery figure I received puts it about a month out, however.
In another bit of good news, the Raspberry Pi Foundation is still planning to release the cheaper Model A board later this year, and they managed to up the RAM to a full 256 MB of RAM which is twice the original 128 MB of RAM they planned. This update to the Model A means that the Model B is now only differentiated by the addition of two USB ports and an Ethernet port.
Did you manage to snag a Raspberry Pi this morning? From how hard the servers were getting hit last night, I'm starting to think that the Raspberry Pi Linux computer may be more popular than actual pie! If you are still interested in pre-ordering a Raspberry Pi, RS Components and Premier Farnell have you covered.
Subject: General Tech | February 22, 2012 - 05:48 PM | Tim Verry
Tagged: Raspberry Pi, linux, fedora remix, Fedora, arm
The Raspberry Pi hardware is coming out at the end of this month, and the folks over at the Raspberry Pi Foundation are gearing up for the release. On their blog, they shared a video by Chis Tyler that I thought was rather interesting. In the accompanying video, he talked about the Raspberry Pi's Fedora Remix linux operating system.
The new Fedora Remix is being produced by Seneca College, and takes the traditional desktop Fedora Linux distribution and adapts it to run on the ARM platform. It will include several open source applications out of the box including a web browser, word processor, and several other tools for managing the OS and working with files. Mr. Tyler states that the Fedora Remix distro will closely resemble a traditional desktop experience when paired with a keyboard and mouse.
What I found interesting from the video was a statement by Paul Whalen, a software researcher for Fedora on ARM, where he talks about the Fedora licensing requiring applications to be built natively on the hardware that it will be used on. Because of that, they had to go out and construct a build farm of approximately 60 ARM devices including the Guru Plug. They design the software on workstation computers, and then send it to the build farm of ARM powered devices to be built and compiled into a native binary, and then is sent back. I thought that it was strange at first that they had to go about it in such a roundabout way but in the end it should help to have natively built applications performance wise.
In another exciting bit of news, Liz ended the Raspberry Pi blog post with an update on the status of the Linux computer's hardware.
They are still working on manufacturing the Raspberry Pis, and they "hope the Raspberry Pis from the first batch will be out of testing by the end of Thursday (ed: tomorrow at time of writing), and on their way to freight"
The Raspberry Pi is almost upon us! The non profit organization expects the SD card image download for the Fedora Remix distribution to be available in the next few days while the Cambridge Reference File System (Debian Squeeze based OS) image is available to download now.
Raspberry Pi Foundation Clears Up Misunderstanding About Their ARM Linux Computers, Still Coming This Month
Subject: Systems | February 10, 2012 - 04:17 PM | Tim Verry
Tagged: Raspberry Pi, linux, htpc, Education, arm
The folks over at the Raspberry Pi Foundation, the organization behind the upcoming ARM powered Linux computer, are having a field day today as they have been flooded with emails from enthusiasts and press worried about the availability and pricing of the Raspberry Pi computer as it seems someone made inferrences that then got blown out of proportion in a typical "telephone game" spiral out of control fashion.
We here at PC Perspective are among the many people who are waiting eagerly to get our hands on the fairly powerful ARM powered computer, so naturally this post by Liz over at the official Raspberry Pi website helped up to take a deep breath and relax. The little Raspberry Pi boards are still coming at the end of this month (February 2012), and they will be priced at or below the previously announced prices of $25 for the base model and $35 for the model with more RAM and Ethernet.
The takeaway from the article is that your plans and/or your desire to get your hands on a Raspberry Pi just because (like me) even if you don't know what to do with it yet are safe. The point of the ARM computers are to bring a low cost, but capable computing platform to the masses for education. Yes, the non profit foundation still needs to make a profit; however, they aren't about to jack up the price just because they can. Liz further stated that the prices of $25 and $35 will not change, unless they can make them cheaper. "Price is such an important part of what we’re doing in trying to change the way people use computers that we’d be totally, totally mad to move the price point." The caveat is that the casing (that will accompany a package aimed at education customers and includes educational software and an outer shell) may add a bit to the price; however, they are going to try not to keep the price the same.
While they have not given a specific date, they state in a rather direct way (even going so far as to bold the text to get the point across- heh) that "You will be able to buy a Raspberry Pi from the end of February, from this website." The misunderstanding, they state, relates to a statement about a different SKU of the Raspberry Pi that is aimed at education and will have a few extra accessories and features including a case to house the board, written support material, and educational software. This version will come later this year (approximately Q3 2012), and was mixed up with the initial release this month.
Are you ready to get your hands on a Raspberry Pi?