Subject: General Tech | March 31, 2013 - 02:21 AM | Tim Verry
Tagged: sony, ps4, playstation eye, playstation 4, gaming, dualshock 4, APU, amd
Sony teased a few more details about its upcoming PlayStation 4 console at the Games Developer's Conference earlier this week. While the basic specifications have not changed since the original announcement, we now know more about the X86 console hardware.
The PS4 itself is powered by an AMD Jaguar CPU with eight physical cores and eight threads. Each core gets 32 KB L1 I-cache and D-cache. Further, each group of four physical cores shares 2 MB of L2 cache, for 4MB total L2. The processor is capable of Out of Order Execution, as are AMDs other processor offerings. The console also reportedly features 8GB of GDDR5 memory that is shared by the CPU and GPU. It offers 176 GB/s of bandwidth, and is a step above the PS3 which did not use a unified memory design. The system will also sport a faster GPU rated at 1.843 TFLOPS, and clocked at 800MHz. The PS3 will have a high-capacity hard drive and a new Blu-ray drive that is up to 3-times faster. Interestingly, the console also has a co-processor that allows the system to process the video streaming features and allow the Remote Play game streaming to the PlayStation Vita at its native resolution of 960x554.
The PlayStation Eye has also been upgraded with the PS4 to include 2 cameras, four microphones, and a 3-axis accelerometer. The Eye cameras have an 85-degree field of view, and can record video at 1280x800 at 60 Hz and 12 bits per pixel or 640x480 and 120Hz. The new PS4 Eye is a noteworthy upgrade to the current generation model which is limited to either 640x480 pixels at 60Hz or 320x240 pixels at 120Hz. The extra resolution should allow developers to be more accurate. The DualShock 4 controllers sport a light-bar that can be tracked by the new Eye camera, for example. The light-bar on the controllers uses an RGB LED that changes to blue, red, pink, or green for players 1-4 respectively.
Speaking of the new DualShock 4, Sony has reportedly ditched the analog face buttons and D-pad for digital buttons. With the DS3 and the PS3, the analog face buttons and D-pad came in handy with racing games, but otherwise they are not likely to be missed. The controllers will now charge even when the console is in standby mode, and the L2 and R2 triggers are more resistant to accidental pressure. The analog sticks have been slightly modified and feature a reduced dead zone. The touchpad, which is a completely new feature for the DualShock lineup, is capable of tracking 2 points at a resolution of 1920x900–which is pretty good.
While Sony has still not revealed what the actual PS4 console will look like, most of the internals are now officially known. It will be interesting to see just where Sony prices the new console, and where game developers are able to take it. Using a DX11.1+ feature set, developers are able to use many of the same tools used to program PC titles but also have additional debugging tools and low level access to the hardware. A new low level API below DirectX, but above the driver level gives developers deeper access to the shader pipeline. I'm curious to see how PC ports will turn out, with the consoles now running X86 hardware, I'm hoping that the usual fare of bugs common to ported titles from consoles to PCs will decrease–a gamer can dream, right?
Subject: Graphics Cards, Processors | January 23, 2013 - 02:42 PM | Ryan Shrout
Tagged: southern islands, sony, ps4, playstation 4, orbis, Kaveri, bulldozer, APU, amd
Earlier today a report from Kotaku.com posted some details about the upcoming PlayStation console, code named Orbis and sometimes just called the PS4. Kotaku author Luke Plunkett got the information from a 90 page PDF that details the development kit so the information is likely pretty accurate if incomplete. It discusses a new controller and a completely new accounts system but I was mostly interested in the hardware details given.
We'll begin with the specs. And before we go any further, know that these are current specs for a PS4 development kit, not the final retail console itself. So while the general gist of the things you see here may be similar to what makes it into the actual commercial hardware, there's every chance some—if not all of it—changes, if only slightly.
This is key to keep in mind because here are the specs listed on the report:
- 8GB of system memory
- 2.2GB of graphics memory
- 4 module (8 core) AMD Bulldozer CPU
- AMD "R10xx" based GPU
- 4x USB 3.0 ports and 2x Ethernet connections
- Blu-ray drive
- 160GB HDD
- HDMI and optical audio output
We are essentially talking about an AMD FX-series processor with a Southern Islands based discrete card and I am nearly 100% sure that this will not match the configuration of the shipping system. Think about it - would a console developer really want to have a processor that can draw more than 100 watts inside its box in addition to a discrete GPU? I doubt it.
Instead, let's go with the idea that this developer kit is simply meant to emulate some final specifications. More than likely we are looking at an APU solution that combines Bulldozer or Steamroller cores along with GCN-based GPU SIMD arrays. The most likely candidate is Kaveri, a 28nm based product that meets both of those requirements. Josh recently discussed the future with Kaveri in a post during CES, worth checking out. AMD has told us several times that Kaveri should be able to hit the 1.0 TFLOPs level of performance and if we compare to the current discrete GPUs would enable graphics performance similar to that of an under-clocked Radeon HD 7770.
There is some room for doubt though - Kaveri isn't supposed to be out until "late Q4" though its possible that the PS4 will be the first customer. It is also possible that AMD is making a specific discrete GPU for implementation on the PS4 based on the GCN architecture that would be faster than the graphics performance expected on the Kaveri APU.
When speaking with our own Josh Walrath on this rumor, he tended to think that Sony and AMD would not use an APU but would rather combine a separate CPU and GPU on a single substrate, allowing for better yields than a combined APU part. In order to make up for the slower memory controller interface (on substrate is not as fast as on-die) AMD might again utilize backside cache, just like the one used on the Xbox 360 today. With process technology improvements its not unthinkable to see that jump to 30 or 40MB of cache.
With the debate of a 2013 or 2014 release still up in the air, there is plenty of time for this to change still but we will likely know for sure after our next trip to Taipei.
Subject: General Tech | March 2, 2012 - 01:01 PM | Jeremy Hellstrom
Tagged: amd, playstation 4
AMD, NVIDIA and Intel have all been going after business that you might never have associated with them in the past. Cellphones, high powered computing and system on a chip are all areas in which they are developing products and doing so successfully. AMD has a double win to announce this morning as they are not only going to be providing the silicon for the graphics on the PS4 but will also be providing the GPU. SemiAccurate goes into the details of what this chip ... or chips ... might be like as Sony has a history of designing very unique systems but have definitely soured on the Cell architecture.
"Yes, you heard that right, multiple sources have been telling SemiAccurate for some time that AMD won not just the GPU as many are suggesting, but the CPU as well. Sony will almost assuredly use an x86 CPU for the PS4, and after Cell in the PS3, can you really blame them? While this may point to a very Fusion/Llano-like architecture we hear that is only the beginning."
Here is some more Tech News from around the web:
- Stolen NASA laptop had Space Station control codes @ The Register
- Windows 8 - Installation, Basic Overview and Radeon 7750 / AMD FX-6100 CPU Performance @ HardwareHeaven
- Netgear WNDR3800 Premium Edition Router @ X-bit Labs
- A Quick Look at Windows 8 Consumer Preview @ Techgage