Subject: Storage | June 17, 2014 - 06:48 PM | Jeremy Hellstrom
Tagged: plextor, Plextor M6e, M.2, PCIe SSD
The Plextor M6e M.2 SSD Series comes in 128, 256 and 512GB models and for those lacking a M.2 slot you can opt for the model below which ships with a PCIe 2.0 adapter for an additional $60. One caveat that Legit Reviews offers immediately is that for many models of motherboards you must manually enable the M.2 slot in the UEFI, otherwise your drive may not be detected. Once enabled properly and benchmarked the performance was found to be in line with the advertised speeds of 770MB/s sequential read and 580MB/s sequential write speeds for the 256GB version. It would seem that the SATA 6Gbs limitation can indeed be overcome but of course that was not enough for the crew at Legit Reviews, they picked up a second M6e and RAIDed them to reach 1408MB/s read and 1098MB/s write!
"Are you wanting to get beyond 550MB/s without having to do a RAID setup? Are you willing to try a new interface? Meet the Plextor M6e Series of PCI Express SSDs! Plextor is leading the charge for native PCIe SSDs and has come up with the first readily-available M.2 PCIe SSD on the consumer market. Other drives like the Samsung XP941 series have been around much longer, but they are OEM only and aren’t really meant for end users. Plextor has stepped up to the plate with a drive that had end user firmware updates, an impressive 5-year warranty and mouth watering speeds."
Here are some more Storage reviews from around the web:
- Crucial MX100 256GB SSD @ Custom PC Review
- Kingston SSDNow E100 200GB Solid-State Drive Review @ NikKTech
- SanDisk Extreme Pro SSD Review - Wicked Speed & 10 Year Warranty @ The SSD Review
- Crucial MX100 512GB @ eTeknix
- KingFast F8 240GB SSD Review @ Madshrimps
- Crucial MX100 @ The SSD Review
- Crucial M550 @ X-bit Reviews
- Samsung 840 Pro @ Benchmark Reviews
- Seagate Surveillance 3TB SATA III HDD Review @ NikKTech
- Thecus N2560 Network Attached Storage (NAS) Review @HiTech Legion
- The eTeknix Guide To Building Your Own NAS System For Under $220
- SanDisk Extreme Pro UHS-II Memory Card @ The SSD Review
- ADATA Premier Pro SDXC UHS-1 U3 Card @ The SSD Review
Subject: Storage | April 24, 2014 - 01:41 PM | Jeremy Hellstrom
Tagged: RevoDrive 350, PCIe SSD, ocz, SF-2282
OCZ has announced the release of the RevoDrive 350, a PCIe SSD using the SandForce 2282 controller and available in 240, 480 and 960GB models which should be priced at $530, $830 and $1300 respectively. This is certainly more expensive than SATA SSDs but then again if you check out the three reviews you can see that this drive is also significantly faster than SATA drvies.
- OCZ RevoDrive 350 480GB PCI-E SSD Review @ Hardware Canucks
- OCZ RevoDrive 350 PCIe 480GB @ Legion Hardware
- OCZ RevoDrive 350 PCIe @ The SSD Review
SAN JOSE, CA – April 24, 2014 - OCZ Storage Solutions - a Toshiba Group Company and leading provider of high-performance solid state drives (SSDs) for computing devices and systems, today announced the RevoDrive 350 Series with workstation-grade design capabilities and maximum performance for professional content creation, multimedia, and extreme gaming applications. Achieving three times the performance of SATA-based SSD solutions, RevoDrive 350 is based on proven performance architecture and features 19nm Toshiba NAND to complete OCZ’s portfolio transition to in-house flash, offering a high-performance yet cost-efficient SSD solution for bandwidth-intensive client applications.
Using the PCI Express Gen. 2 x8 interface and up to four LSI SF-2282 processors to offer more available bandwidth than the previous generation, RevoDrive 350 features up to 1.8GB/s sequential speeds and up to 140,000 4K random write IOPS, delivering SSD RAID performance without the hassle in an easy-to-deploy, single card solution. Enabling both performance and functionality for applications ranging from scientific computing to extreme gaming systems, this workstation-class storage product accelerates application performance and takes full advantage of today’s multithreaded processors and software, supporting up to 50GB of host writes per day for 3 years to provide leading endurance for media professionals over less robust consumer SSDs.
“The new RevoDrive 350 is built using proven technology with the added benefit of utilizing in-house premium Toshiba flash and OCZ’s proprietary Virtualized Controller Architecture (VCA) 2.0 to deliver highly efficient performance aggregation while reducing the burden on host resources,” said Daryl Lang, Senior Vice President of Product Management for OCZ Storage Solutions. “This next generation PCIe SSD is the ideal solution for performance-minded users looking to maximize both bandwidth and density for the complete gamut of gaming, content creation and workstation applications.”
VCA 2.0 effectively makes the RevoDrive 350’s multi-controller design appear and act as a single drive to the host system to enable drive-level management features such as secure erase, SMART, and TRIM. In addition to mass data storage, the RevoDrive 350 can also be used as bootable device, promoting ultra-fast system boot-ups.
Improving on the previous generation, RevoDrive 350 features a sleek integrated heatsink that provides a more stable and cooler thermal SSD environment, and includes optimized drivers redesigned from the ground up with new Linux support in addition to Windows® OS. Available in 240GB, 480GB, and 960GB capacities, RevoDrive 350 provides ample space, and comes backed by a 3-year warranty.
Subject: General Tech | April 23, 2014 - 01:13 PM | Jeremy Hellstrom
Tagged: mcs, ULLtraDIMM, diablo, PCIe SSD
Memory Channel Storage is exactly what it sounds like, non-volatile flash storage that is placed into DIMM slots to take advantage of the low latency connection between the CPU and more traditional DIMMs. This may not help gamers to rack up higher scores but for server applications which have large queue depths resulting in very large IOPS. This setup also allows for workload to be shared across memory channels, as opposed to a PCIe solution which is only able to connect to the lanes accessible to that particular slot. There is a link to the white paper on The Register for those who wish to delve deeper.
"Diablo provides Memory Channel Storage (MCS) technology to SanDisk’s subsidiary SMART Storage. It’s OEMed on to Supermicro and also IBM (soon to be Lenovo) for its x86 servers as ULLtraDIMM technology."
Here is some more Tech News from around the web:
- Toshiba announces 15nm NAND flash memory chips @ The Inquirer
- Ubuntu 14.04 LTS: Great changes, but sssh don't mention the... @ The Register
- How LG Took WebOS from Mobile Phones to TVs in Under a Year @ Linux.com
- PAPAGO P2Pro Full HD DashCam @ NikKTech
- iOS 7.1.1 lands on iPhones and iPads with SSL bug fixes, Touch ID improvements @ The Inquirer
- The TR Podcast 153: 4K ascendant, CodingHorror resplendent
Subject: Storage | April 4, 2014 - 02:05 AM | Tim Verry
Tagged: plextor, PCIe SSD, pci-e ssd, M6e, M.2
Update: Plextor has provided MSRP pricing for all three drives (see table below). Further, the company expects Newegg prices to be at or possibly slightly below MSRP. The new pricing information certainly makes the drives more attractive than previous estimates.
Plextor showed off its M6e PCI-E SSD at CES earlier this year, and the drives will soon be available for purchase in the US. The M6e is a M.2 form factor SSD that uses a Marvell 88SS9183 controller and Toshiba Toggle NAND MLC flash to offer up to 512GB of speedy (and bootable!) storage.
The Plextor M6e drive comes as a bare M.2 drive or as a version paired with a M.2-to-PCI-E adapter card for desktop PCs without the newer M.2 connector on the motherboard itself. In either case, the M6e utilizes two PCI-E 2.0 lanes and avoids the SATA III 6Gbps storage bottleneck altogether. The drive has its own BIOS implementation and should not require users to install separate drivers. The SSD supports both legacy and UEFI BIOSes along with standard storage technology such as AHCI, NCQ, encryption (AES-256), TRIM, SMART, et al.
The drives come in 128GB, 256GB, and 512GB capacities. The M6e SSDs are rated with a 2,400,000 hour MTBF and come with a 5 year warranty. Both the 256GB and 512GB drives reportedly offer up 770 MB/s sequential reads, 105,000 4K random read IOPS, and 100,000 4K random write IOPS. The 512GB M6e SSD has the highest sequential write speeds at up to 625 MB/s with the 256GB model topping out at 580 MB/s. The 128GB version is a bit slower in sequential writes and random read/write IOPS due to fewer NAND chips and channels, but still manages to offer up to 770 MB/s reads, 335 MB/s writes, 96,000 4K random read IOPS, and 83,000 4K random write IOPS.
The table below lays out the speeds and estimated pricing of the drives at the available capacities according to Plextor. Fortunately, Tek Syndicate found that at least the 256GB drive performs very close to its rated speeds in their video review.
|Plextor M6e Capacities||128GB||256GB||512GB|
|DRAM||256MB DDR3||512MB DDR3||1GB DDR3|
|Sequential Read*||770 MB/s||770 MB/s||770 MB/s|
|Sequential Write*||335 MB/s||580 MB/s||625 MB/s|
|Random Read IOPS*||96,000||105,000||105,000|
|Random Write IOPS*||83,000||100,000||100,000|
*All listed speeds are "up to n MB/s."
The drives will be available later this month at as-yet-unreleased MSRPs. The drives will initially be a Newegg exclusive in the US from April 7th to April 13th, after which it should make its way to other retailers. Note that the USD prices in the above chart are estimates based on pricing information scattered around the internet for the M6e drives. I have reached out to Plextor for comment and will update with official MSRP information as soon as possible.
Subject: General Tech | February 11, 2014 - 03:15 PM | Jeremy Hellstrom
Tagged: fusion-io, PCIe SSD, ION Accelerator
If you love fast storage Fusion-Io has new products you are going to love. The first is the ION Accelerator, which can hold up to 32TB of flash storage in proper server form factor, the full 32TB likely being 4U. They rate the speed of this device at 1.7 million random IOPS, 56 microsecond access latency and 23GB/sec of bandwidth. They also released the hybrid ioControl line of appliances with a flash cache in front of HDDs which will provide great performance at a fraction of the cost of the purely flash ION. There are three models of ioControl, the n5-50 with up to 1.46TB flash and 160TB, the n5-100 with handles up to 3.14TB of flash and 176TB of HDD and the largest n5-150 with 4.8TB of flash and 192TB of disk space. Obviously the larger pool of flash can improve performance; to see the full spec sheets drop by The Register.
"These two appliances are essential server/controllers running Fusion-io software with their innards stuffed full of Fusion’s PCIe flash cards, plus disks in the hybrid appliance product. The company says they are “for accelerating enterprise applications including Oracle, SAP HANA, and Microsoft SQL Server, as well as virtualisation workloads.”"
Here is some more Tech News from around the web:
- Intel Labs demos crazy-efficient, crazy-fast 'network on chip' @ The Register
- Microsoft gets with the times, builds two-factor authentication into Office 365 @ The Register
- Samsung leaps out of volume PC game as UK market crashes @ The Register
- Intel 7260HMW 802.11AC Versus Intel 7260HMW BN 802.11n @ Legit Reviews
- MtGox takes heat as reasons for Bitcoin FAIL surface @ The Register
- Cloudflare fights off a huge DDoS attack @ The Inquirer
- Retrotechtacular: Where the Linux/UNIX TTY Came From @ Hack a Day
- PGP Web of Trust: Core Concepts Behind Trusted Communication @ Linux.com
- Silentium PC EU Joint Giveaway @ NikKTech
Subject: Storage, Shows and Expos | January 8, 2014 - 11:20 PM | Allyn Malventano
Tagged: PCIe SSD, OTG, CES 2014, CES, adata
ADATA will be rolling out their own PCIe SSD, this solution opting for the SF3700 controller due out later this year. Their demo produced the same 1.8 Gb/sec sequential read speed we saw over at Kingston earlier today:
While the above solution is SF3700-equipped M.2 adapted to standard PCIe by a ustom PCB, ADATA was also showing an operational PCB which had the components direct mounted:
Note the heat sink to help dissipate the heat produced by the SF3700. We hope the heat output will be optimized as development of this new controller progresses.
We also saw a unique spin on the OTG-style USB flash drive we'd been seeing all around CES this year:
Instead of having a common center containing the flash memory, they have made the center section into more of an adapter to bridge the super-small USB drive (right) across to the micro-USB port (left). An advantage of this format is that you could use the same adapter to bridge pretty much any standard USB flash drive over to an Android device.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Storage, Shows and Expos | January 8, 2014 - 11:02 PM | Allyn Malventano
Tagged: plextor, PCIe SSD, M6e, CES 2014, CES
This morning Plextor launched their new M6e PCIe SSD. Their press blast appears after the break, but before you do so, check out the pics we grabbed earlier today:
The M6e is essentially an interposer board that simply interfaces the Marvell controller / Toshiba flash M.2 PCIe SSD to a standard desktop class PCIe connector. This solution is slower than the upcoming SF3700 solution being implemented by Kingston and ADATA, but this product is shipping now, while the SF3700 will not be production ready for at least another six months time.
Full press blast appears below:
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | October 2, 2013 - 01:49 PM | Jeremy Hellstrom
Tagged: IBM, fusion-io, PCIe SSD, enterprise
IBM's F825, F1650, and F3200 Enterprise Value PCIe SSD cards will use Fusion-IO's architecture to provide their servers with a storage speed boost. Available for order as of the 22nd of this month you will be able to order these cards in sizes up to 3.2TB. One caveat mentioned at The Register is the terms of the warranty, it is only good for 1 year or the rated number of program/erase cycles, whichever comes first. High speed storage will be attractive to enterprise purchasers but having to replace the cards every year may cool their enthusiasm quite a bit.
"IBM's announcement is here, and says the Fusion-io cards are available for System x and BladeCenter servers. Users get from 825GB to 3.2TB of MLC flash per PCIe slot to accelerate apps in these servers, which no longer have to wait at the data access bus-stop for disk drive latency to send the heads to the right tracks."
Here is some more Tech News from around the web:
Subject: Storage | September 14, 2013 - 12:52 PM | Tim Verry
Tagged: scorpion deluxe, SandForce SF-2281, sandforce, PCIe SSD, Mushkin
Mushkin, a company primarily known in the US for its RAM modules, announced a new PCI Express-based SSD this week called the Scorpion Deluxe. The new solid state drive is an update to the original Scorpion drive, and while it is
not boot-able (edit from Allyn - it is bootable), it makes for an extremely speedy cache for large databases at decent prices (for a PCI-E SSD, anyway).
The Mushkin Scorpion Deluxe is driven by four SandForce SF-2281 processors and uses a PCI-E 2.0 x8 electrical interface to offer up gobs of bandwidth. The drive comes in several capacities, including 240GB, 480GB, 960GB, and 1,920GB. It is rated at 2,150 MB/s reads and over 1900 MB/s writes (exact rated speed depends on capacity, up to 2000 MB/s on the 2TB model). Also, the drive is specc’d to deliver a bit over 100,000 4K read and write IOPS. There is a 1 million hour MTBF rating and a 3 year warranty with the SSD.
Mushkin is aiming the drive more-so at the enterprise market for use in servers to cache large databases or in workstations working with large files in content creation, modeling, or simulations.
The Scorpion Deluxe drive is available now in the US, and will be up for purchase worldwide on September 16th. Pricing is not too bad, especially at the higher capacity points where the $/GB starts to look good.
|PCI-E SSD Capacity||Pricing (US)||$/GB|
Only $1.07 per GB on the 2TB model? If only I had a corporate expense account! (heh)
Subject: Storage | September 4, 2013 - 02:37 AM | Tim Verry
Tagged: ssd, PCIe SSD, msata, LSI, kingspec, jmicron
KingSpec recently started shipping a new PCI-E based SSD that achieves more than 2.5GB/s sequential read performance from multiple mSATA SSDs behind a 6Gbps LSI RAID controller. The KingSpec MC2J677M1T is a full height expansion card with a PCI-E 2.0 x8 interface.
The new KingSpec solid state drive is bootable and uses a 6Gbps LSI RAID controller that connects to eight 6Gbps mSATA slots. The drive comes in 1TB and 2TB total capacities and the eight 6Gbps mSATA slots are occupied by eight 128GB or 256GB mSATA SSDs. Each mSATA SSD is powered by a Jmircon SSD controller, NANYA-manufactured DRAM cache, and Intel MLC NAND flash. Further, the LSI RAID controller is actively cooled by a small fan.
As far as performance goes, the 1TB model is rated at 84,000 IOPS and approximately 2GB/s sequential read and write transfer speeds. The SSD Review received a sample of the new drive and provided some preliminary benchmark results in the form of an ATTO benchmark run. At a queue depth of 4, the KingSpec MC2J677M1T achieved 4K reads of 2567 MB/s and 4K writes of 1613 MB/s.
The 1TB KingSpec PCI-E SSD will be available later this year for between $2,000 and $3,000 USD.
When asked for his thoughts, PC Perspective storage editor Allyn Malventano noted that the eight JMicron-driven mSATA SSDs in RAID is just asking for trouble, and the 4K random IO offered by the drive is actually less than some single drive SATA SSDs on the market. Unfortunately, the LSI RAID controller is “a major bottleneck for SSD-level random access.”
Get notified when we go live!