OCZ launches Agility 4 SSD based on Indilinx Everest 2

Subject: General Tech, Storage | May 29, 2012 - 08:45 PM |
Tagged: ssd, ocz, Agility 4

OCZ Technology Group launched their latest entry in the Agility 4 line of Solid State Drives. The drive will make use of the Indilinx Everest 2 controller over a SATA 6Gbps interface. It is rated to provide 400MB/s reads with up to 85,000 write IOs per second. Unlike its 5-year Vertex 4 brethren the Agility 4 will be backed by a 3-year warranty.

Just a couple of months ago Al posted his review of the OCZ Vertex 4 solid state drive which he found to be aggressively priced and with good potential depending on firmware support.

OCZ has just released the Agility 4 to complement their new product line with a slightly cheaper and slightly lower performance option compared to the Vertex. Both drives are based on the same Indilinx Everest 2 controller with transfer rates being the main divisor between the two products. Retail price of the Agility 4 is placed much more aggressively and flirts even closer with the $1 per gigabyte line than the Vertex 4.

OCZAgility4.png

Almost time to get change our metric to cents per gigabyte. ... Yay!

The Agility 4 is rated to perform with consistent read bandwidths of 400MB/s which is below the Vertex 4’s rated 535 MB/s sequential reads throughput. The write IOPS is rated at 85,000 random transactions per second and exactly matches that metric with the Vertex 4.

OCZ is covering the Agility 4 with a 3-year manufacturer warranty. It is on back-order from NCIX with an expected retail value of $259.20 for the 256GB version which might as well be called a dollar per gigabyte. Newegg has yet to list the product or its expected value.

Source: OCZ

Take the PC Perspective Survey - Win Prizes!

Subject: General Tech | May 29, 2012 - 06:53 PM |
Tagged: survey, ocz, giveaway, corsair, contest

Every once in a while take an opportunity to learn about YOU, our faithful fans of PC Perspective.  Today is one of those days as we have setup a small survey to help point us in the right direction for the future of the website.  We can learn a lot from your help with this:

  1. We learn about you.
  2. We learn what you want to read on PC Perspective.
  3. We learn what you don't want to read on PC Perspective.
  4. We learn what you want to see as the future of PC Perspective.

As you can see, YOU have a lot of power over what is going to happen here, so wield it wisely.  If you write in the comments section that we should fire Josh then we'll probably do it probably not do it. 

Other than the obviously great feelings you'll receive from helping out your friends at PC Perspective, we decided that to entice you to spend the 5 minutes on the survey that it will require we are going to offer up a handful of prizes as well!

survey-vertex4small.jpg

1 x OCZ 128GB Vertex 4 SSD

survey-corsairc70.jpg

1 x Corsair Vengeance C70 Military Green Chassis

survey-gigabyte.jpg

1 x Gigabyte Z77 G1.Sniper M3 Motherboard

All you have to do to win one of these great prizes is:

  1. Fill out our survey.
  2. Wait for us to pick you as a winner.

Man, we pride ourselves on making our contests and sweepstakes easy, but this is ridiculous!  The competition is open to ALL people around the world though you can ONLY enter one time!  The survey will run through the 8th of June, so get your entries in!

Good luck and thank you so much for being a part of PC Perspective!

Continue on to the survey for your chance to win and support PC Perspective while doing it!

OCZ Updates Vertex 4 Enthusiasts to 1.4 Release Candidate Firmware

Subject: Storage | May 7, 2012 - 10:27 AM |
Tagged: Vertex 4, sata, ocz, firmware

This morning, OCZ pushed out a new firmware, dubbed 1.4RC. This is a release candidate of the upcoming performance-boosting firmware, and is meant for "enthusiasts who like to tinker with their hardware".

DSC02737.jpg

New Performance Specs in Red:
Max Read / Write
128GB: 535MB/s - 550MB/s / 200MB/s - 420MB/s
256GB: 535MB/s - 550MB/s / 380MB/s - 465MB/s
512GB: 535MB/s - 550MB/s / 475MB/s

As a heads up for those who are feeling froggy this Monday morning and choose to update their Vertex 4 - this is a destructive update and will wipe the drive. The updater runs within a Windows session with the Vertex 4 connected as a secondary drive. While you're 'under the hood', I'd also recommend performing a secure erase with the OCZ Toolbox software after you have udpated and power cycled the SSD.

I have been able to partially confirm the performance increases, and will be reporting full results later this evening (for all three capacity points). Stay tuned!

*Note* OCZ NDA'd this update for this morning, but we have not seen where they have posted it for download from their site. We will post a link in the comments below once it has become available.

1TB OCZ SSD Coming Later This Month

Subject: Storage | May 2, 2012 - 08:34 AM |
Tagged: ssd, ocz, Octane, mlc, 1TB

According to a recent press release, OCZ Technology Co. is going to up the Octane ante with a 1TB solid state drive. Coming in at an MSRP of $3,238 USD (approx. 260,000 yen), the SSD features 1TB of synchronous MLC flash, 512MB of DRAM, and an Indilinx Everest controller bundled in a 2.5” form factor.

Octane_SSD_800x533.jpg

The SATA 3 (6Gbps) OCT1-25SAT3-1T SSD not only brings gobs of storage, but puts up some respectable performance numbers. It is capable of 460MB/s sequential reads and 330MB/s sequential write speeds. Also, it can deliver a maximum of 24,000 4K read IOPS (input/output operations per second) and 32,000 4K random write IOPS [the translation may be off here, I was expecting to see the higher IOPS reflected as 4K reads and not writes]. Other drive features include TRIP support, ECC (error correction), AES-256 drive encryption, SMART diagnostics, and a MTBF (mean time between failures) of 1,200,000 hours.

The 1TB SSD is slated for a mid-May release and will come with a 3 year warranty. You know, my birthday is coming up in a couple months... (hehe)

Are OCZ's Indilinx Everest and Everest 2 Controllers Actually Marvell Hardware?

Subject: Storage | April 11, 2012 - 09:43 PM |
Tagged: Vertex 4, ocz, Octane, Marvell, everest

We've covered the OCZ Octane and more recently the new OCZ Vertex 4. We've also seen how they behave under wildly differing firmware revisions. What have we not yet seen? Turns out the hardware powering both the Octane and Vertex 3 controllers was actually from Marvell.

icon.jpg

Judging from the performance we saw from the Octane, it's clear that Indilinx is cranking out some great firmware for this hardware, but it's a bit of a surprise to us that the Indilinx arm of OCZ chose to go this route as opposed to spinning their own next gen controller, especially in light of how well the original Indilinx Barefoot was received back in the day.

block diagram pic.png

It turns out that 'Indilinx Infused' is more than just a catch phrase.

As evidenced by some commenters over at the source, some feel cheated that this news did not come to light earlier. My take on it is that an SSD is a package deal - controller hardware *and firmware* make up that package. If a company can deliver both in a reliable and well performing manner, then it's that companies product you are buying, not just the controller.

Source: Anand

OCZ's brand new Vertex 4 arrives

Subject: Storage | April 4, 2012 - 03:37 PM |
Tagged: ocz, ssd, sata 6Gbs, Vertex 4, Indilinx, vertex

There are quite a few changes in the 4th version of OCZ's Vertex SSDs, not only the new Indilinx controller but the positioning of it right in the centre of the PCB.  You will also notice what looks like an mSATA interface, but The Tech Report is sad to say that it is only a connector for OCZ's internal testing machinery and is not a standard connector.  Of course, we may have to see what the modders do with it.  The performance is as good as you would expect in most circumstances though there were some tests the new prefetch mechanism had troubles with.  OCZ claims that the drive was intended to be partitioned and doing so could help the performance.  Also worth applauding is the move to a 5 year warranty, signalling OCZ's increased faith in reliability.

Our own Al Malventano took a look at not only the drive but also the difference between the 1.30 and 1.52 firmware revisions.

TR_board.jpg

"Just a few months after its Indilinx Everest controller debuted in the OCZ Octane, a second-generation Everest chip has taken root in the Vertex 4 SSD. We take a closer look at the latest Vertex to see what's changed and how its performance measures up."

Here are some more Storage reviews from around the web:

Storage

 

Subject: Storage
Manufacturer: OCZ Technology

Introduction, Specifications, and Packaging

Introduction

OCZ has been in the SSD game for quite some time now. Their first contender was the OCZ Vertex, which we reviewed back in Febuary of 2009. While the original Vertex was powered by an Indilinx BareFoot controller, the Vertex line switched over to SandForce for the second and third generations. The fourth generation brings Indilinx back to the Vertex, this time with the Everest 2. You may recall Everest made its first appearance in the OCZ Octane, which has already proven itself to be a solid contender in the market.

DSC02737.JPG

Before we get into the meat and portatoes, we'll kick this off by saying this will not be a typical Vertex 4 review. We had benches run on 512GB and 256GB Vertex 4 samples, but the numbers we were seeing seemed 'off', so OCZ provided me with an alpha/engineering level firmware late last night. I suspect most other reviews you read today will include results from the 1.30 initial shipping firmware, or perhaps from the 1.31 bugfix firmware (which corrected an issue with secure erasure), but this piece will cover both 1.30 and a newer 1.52 interim build. Sometimes it's necessary to burn the midnight oil in the interest of presenting the full picture (or one as complete as possible) to our readers, and this was one of those pieces. We will revisit the Vertex 4 again very soon in the form of a more final product review, but for now we'll go with what we've got.

Read on for the full review!

OCZ's Virtualized Controller Architecture doesn't need any steenking bridges

Subject: Storage | April 2, 2012 - 05:10 PM |
Tagged: RevoDrive 3 X2 240GB, PCIe SSD, ocz

The thing which most caught The Tech Report's eye when they examined the OCZ RevoDrive 3 X2 240GB PCIe SSD was the complete lack of bridge chips.   When they inquired as to just how the SuperScale storage controller manages this they didn't get a precise answer, as that would be giving away secrets, but were told it "combines processing and full DMA cores, as well as internal PCIe, SATA and SAS interfaces."  Putting that mystery aside, they installed the SSD to see just how four SSDs on one card perform in real world and synthetic tests.  The tests will impress you but keep in mind the cost of the card, at $2.83/GB it does not come cheap.

Long time readers might remember Al's review of this drive from last summer.

TR_standing.jpg

"Using virtualization voodoo, the RevoDrive 3 X2 combines four SandForce-based SSDs on a single PCIe card purportedly capable of transfer rates up to 1500MB/s. We take a closer look to see if the Revo is as impressive as it sounds. "

Here are some more Storage reviews from around the web:

Storage

 

OCZ's RevoDrive 3; the other kind of hybrid

Subject: Storage | March 12, 2012 - 07:00 PM |
Tagged: Sandforce SF2281, revodrive hybrid, RevoDrive 3, PCIe SSD, ocz, hybrid ssd

If you are looking for the speed of an SSD but can't afford one big enough to hold your OS and programs there are two main ways to work around this.  The first is only available to Intel SandyBridge owners and that is Intel's SRT which allows you to use a mSATA SSD as a cache drive to speed up commonly used programs.  The second is to pick up a hybrid SATA drive like the Seagate Momentus XT line, which does essentially the same thing but is compatible with most systems and is self contained.  Techgage would like to remind you that there is a third choice, albeit perhaps more expensive than the other two; the OCZ RevoDrive 3 Hybrid PCIe SSD.  This drive sports 1TB of HDD space and 128GB of flash memory split between two SandForce 2281 controllers and at a cost of $330 gives you a lot more space than a $330 SSD.

TG official.jpg

"SSDs are expensive and often don't offer enough capacity to meet user needs. The recent SSD caching craze attempts to alleviate both these issues, but OCZ has done one better. Combining a RevoDrive 3 with a 1TB HDD the RevoDrive Hybrid offers a self-contained SSD caching solution that is guaranteed to work."

Here are some more Storage reviews from around the web:

Storage

 

Source: Techgage

OCZ Introduces the High-Performance Fatal1ty 1000W Power Supply

Subject: Cases and Cooling | February 28, 2012 - 12:28 PM |
Tagged: ocz, fatal1ty series, kilowatt, PSU, modular psu

OCZ has expanded their Fatal1ty Series of PSUs to include a 1000W model, perfect for systems with multiple GPUs.  Not only will you get reliable power, for those who like to show off the insides of their cases the bright red of the PSU and power connectors will give you a unique looking system, powered on or not.  It doesn't seem to be available yet, but should be very soon.

OCZFAT1K.jpg

SAN JOSE, CA—February 28, 2012—OCZ Technology Group, Inc. (Nasdaq: OCZ), a worldwide leading provider of high-performance solid-state drives (SSDs) and power supplies for computing devices and systems, today announced the availability of the Fatal1ty 1000 Watt power supply, the latest high-performance PSU targeted at gamers and enthusiasts that demand maximum wattage, high efficiency, and a modular cabling configuration.

Dedicated to delivering premium power solutions, OCZ’s latest PSU was co-developed with twelve-time world champion Johnathan “Fatal1ty” Wendel to meet the specific needs of fellow gamers in performance, stability, and ease of integration to reduce system downtime. Featuring individually-sleeved modular cables, the Fatal1ty Series eliminates unnecessary wire clutter for a cleaner overall presentation and superior airflow in high end systems that are packed with components.

“We are thrilled to partner up once again with Fatal1ty to build the ultimate PSU designed specifically for hard-core gamers,” commented Steve Lee, Senior Vice President of Power Management at OCZ Technology. “The new 1000W Fatal1ty PSU delivers exceptional performance for dual GPU platforms, enhanced reliability with premium components, excellent efficiency and robust features, including a large yet ultra quiet fan and high-end individually sleeved cables. All of these add up to a premium PSU that gamers can be confident in to power through the most intense gaming and enthusiast environments.”

“When looking for the ideal gaming power supply, I look for plenty of power to support multi-GPU configurations, superior reliability, and features like quiet and efficient cooling that allow me to stay focused on the game,” said Wendel. “I also want modular cabling which makes it easy to configure my rig and make it look clean. With the new Fatal1ty 1000W modular PSU, gamers are armed with the perfect solution to power all of their high-end components, enabling them to design the perfect gaming rig. I want gamers to play to their full potential, and with this PSU your gaming rig will have every bit of power it needs to fulfill your hardcore gaming sessions.”

Combining a powerful single +12V rail and premium components, the Fatal1ty 1000W balances the needs for both gamer and enthusiast standards with 100% Japanese 105°C capacitors, continuous output at a demanding 50°C ambient temperature, and heavy-duty protection circuitries. Key features include a large temperature and load controlled 140mm double ball-bearing fan with red LEDs for whisper quiet operation, well-regulated electrical noise and ripple, and 80 Plus Gold certification with up to 90% efficiency at typical loads.

The Fatal1ty Series is tested and qualified for the most component-heavy systems with multiple power-hungry drives and video cards by delivering 1KW of continuous power, and offers rock-solid, super-clean DC output and complete array of connectors including detachable CPU, and multiple PCIe, SATA, and peripheral cables. The Fatal1ty Series provides universal input and active PFC (Power Factor Correction) to effectively regulate input voltage and maintain a stable supply of power in an industry-standard ATX form factor to accommodate virtually all computer towers. With sheer power combined with maximum efficiency, the Fatal1ty 1000W is backed by a 5-year warranty.