Subject: Cases and Cooling | May 8, 2013 - 01:46 PM | Tim Verry
Tagged: ultra tower, nzxt, h630, grid hub, case
NZXT has unleashed a monstrous new PC case onto the tech world with the H630 Ultra Tower. The new chassis is constructed of powder coated steel and ABS plastic. It can accommodate XL-ATX motherboards, two 360mm radiators, 8 hard drives, and a bunch of fans within its sound dampened interior. The H630 case weighs approximately 31 pounds and measures 547 x 245 x 567mm (HxWxD).
On the outside, the NZXT features a glossy white or black powder coated finish. You will not find any case windows or bling, but the design is clean and simple. It offers filtered fan intakes and an IO panel located on the right side with two USB 2.0, two USB 3.0, and two audio ports as well as a SDXC card slot. Two 5.25” drive bays adorn the top-front of the case.
The inside of the case is rather spacious with an optical drive bay, three removable hard drive bays, an opening for a bottom mounted PSU, and a large motherboard tray that can hold boards up to XL-ATX in size. Water cooling enthusiasts will be pleased to know that they can mount a 360mm radiator in the top and front of the case, which is a pretty impressive feat without needing to use an externally-mounted rad (like I had to with my case). If you opt for additional air cooling, you can further fit two 140mm fans in the bottom of the case, one 140mm case in the HDD cage, and one 140mm case in the rear of the case. Needless to say, that’s a lot of cooling options!
NZXT has also outfitted the H630 with sound dampening material, which should help to soften the noise of all the hardware enthusiasts are likely to pack into the case--though I would wait for reviews to see how well the material works. Additionally, the H630 has 9 expansion slots, cable routing holes, the company's 10-port Grid fan hub, and two 2.5” SSD mounts hidden behind the motherboard tray.
The new H630 Ultra Tower should be available in the US for around $150 by the end of May and in the UK for £129.05 sometime in June. For the price, it seems like an impressive deal. I’m tempted, though I’m not sure if it will fit under my desk. You can find more photos and specifications on this NZXT product page.
Subject: Cases and Cooling | April 19, 2013 - 08:46 AM | Tim Verry
Tagged: nzxt, case fan, fan controller, fan hub, cooling, grid
NZXT has announced that it is making its Grid fan hub available to the masses. No longer only available with certain NZXT cases, the Grid fan hub takes a single Molex power cable and provides 3-pin power outputs for up to ten fans.
The NZXT kit will come with the Grid hub, a 200mm long Molex power adapter, a single 200mm long (3-pin) female-to-female adapter cable, and two 200mm (3-pin) fan extension cables. NZXT is also including five black cable ties to assist with cable management.
Unfortunately, the Grid does not provide functionality to allow adjustable fan speeds. All fans connected to the Grid hub will run at 100% unless other means (such as resistors) are used inline to slow them down. If you only care for speed, and are in a situation where your motherboard does not support enough fan headers but you cannot justify a full fan controller the Grid might be for you. For the price, it is serviceable in that regard.
Speaking of pricing, the Grid fan hub will be available soon with a MSRP of $11.99. More information is available on NZXT's product page.
Is the Grid something that you could see yourself using?
Subject: Cases and Cooling | April 2, 2013 - 06:28 PM | Jeremy Hellstrom
Tagged: nzxt, phantom 630
The NZXT Phantom 630 is much more expensive than many of their models, the $180 price tag puts it in contention with many other long standing high end case manufacturers. This price is justified in many ways, especially the sheer size of the 12.3kg (27.1lb) case which measures 245x627x600mm (9.7x24.7x23.6") and can accept a 170mm tall CPU cooler even with the 200mm side panel case fan installed. Perhaps not the most unobtrusive of cases but it provides enough elbow width to make installing a system much more comfortable. It also gives enough space to either set up watercooling or to depend on aircooling as this case accommodates up to four 140 or 120mm fans and four 200mm fans of which three can be swapped for a higher number of 140 or 120mm fans to accommodate radiators with different fan sizes. Check out the drive capacity and more at [H]ard|OCP.
"NZXT's new enthusiast computer case, the Phantom 630, looks to be truly designed for the computer hardware enthusiast and does not just carry the label like so many other products. NZXT has built the chassis with the end user in mind that wants to take things up a notch and not be annoyed when trying to accomplish his build goals."
Here are some more Cases & Cooling reviews from around the web:
- nWin D-Frame Limited Edition Open-Air Chassis @ Tweaktown
- Fractal Design Define R4 Arctic White Case @ Benchmark Reviews
- Cooler Master HAF XB Chassis @ eTeknix
- Enermax Ostrog GT Chassis @ eTeknix
- In Win GT1 Case Review @ Hi Tech Legion
- Antec GX700 @ Hardware.info
- Fractal Design Define R4 Review @ Hardware Canucks
- In Win BP655 Chasis @ LanOC Reviews
Azza Silentium 920 Case Review @ Hi Tech Legion
- Compact Liquid Cooling Systems Roundup. Part II: Front Runners @ X-bit Labs
- Cooler Master Seidon 120XL @ techPowerUp
- Gelid Slim 12 UV and PL Blue 120mm Fan @ eTeknix
- Xigmatek XAF Series F1255 120mm Fan @eTeknix
- Phanteks PH-TC12DX @ Kitguru
- DeepCool Neptwin Heatsink Review @ Frostytech
- Phanteks PH-TC14PE & PH-TC12DX CPU Coolers Review @ Hardware Canucks
- Phanteks PH-TC12DX @ Funky Kit
- Zalman FX100 review: passive Ivy Bridge CPU cooler@ Hardware.info
- Noctua NH-L9i Low Profile @ Modders-Inc
- Thermalright True Spirit 120M CPU Cooler Review @ Madshrimps
- Evercool Venti HPQ-12025 @ Funky Kit
- DeepCool Frostwin Heatsink Review @ Frostytech
- Gelid The Black Edition CPU Cooler Review @ Hardware Secrets
Subject: General Tech, Cases and Cooling, Shows and Expos | January 8, 2013 - 04:45 PM | Scott Michaud
Tagged: nzxt, ces 2013, CES
Am I the only one who thinks the slanting between the metal and the grating on the front of that case looks like a play on The Phantom of the Opera?
NZXT wants the Phantom 630 to be the case for the desires of every enthusiast. While you can never satisfy the type to cram an i7 into a toaster, the 630 does seem to have a nice feature checklist and a lot of nooks and crannies to hide your components. To illustrate their design in a single bullet point: you can fit not one, but two SSDs behind the motherboard tray to keep them out of the way. The rest of the drives are installed in bays which can be rearranged in different configurations.
The case is also designed with water cooling in mind. NZXT claims support for both 3x120 and 2x120 radiators. Unfortunately, liquid cooled machines are a foreign concept to me so I am not sure how difficult those radiators are to fit in conventional cases. I mean, I figure that a 3x120 radiator is over a foot long because I understand the metric system, but I have never experienced the struggle of trying to stick it somewhere. That said, I assume if you are in to sort of thing you could decide for yourself immediately. Also included is a 30Watt single-channel fan controller integrated into the case.
The Phantom 630 will be expecting to retail for $179.99 when it comes to market in Matte-Black, Gunmetal, and White options.
PC Perspective's CES 2013 coverage is sponsored by AMD.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | January 2, 2013 - 02:15 PM | Jeremy Hellstrom
Tagged: Respire T20, nzxt
For users who don't need a full kilogram of cooler, the NZXT Respire T20 is a very attractive heatsink. Weighing only 550g, with dimensions of 160 x 123 x 65mm including the fan and an MRSP of only $30 this cooler will fit the case and budget of many users. Of course the smaller size does mean that it can't handle overclocking high end chips but FrostyTech's testing showed that it is capable of handling mid-range chips without a problem. If you have an upcoming build that would benefit from a quiet cooler with better performance than a stock heatsink then this review is worth checking out.
"On the dock today is NZXT's Respire T20 heatsink. The Respire T20 stands 160mm tall, putting it in the class of full tower CPU coolers. At the heart of this 510 gram heatsink are three heatpipes; two 6mm diameter and one 8mm diameter, all exposed at the base for efficient heat conduction."
Here are some more Cases & Cooling reviews from around the web:
- Phanteks PH-TC12DX CPU Cooler Review @ Hi Tech Legion
- Prolimatech Magnetic Pin Fan Mount Review @ Legit Reviews
- Noctua NF-F12 PWM 120mm Fan @ eTeknix
- Corsair Hydro H55 CPU Cooler @ Kitguru
- Corsair Hydro H60 Watercooling System Review @ Frostytech
- NZXT Kraken X40 and X60 AIO Liquid CPU Cooler Review @ Hi Tech Legion
- Swiftech H20-320 Elite Custom Liquid Cooling @ Bjorn3D
- NZXT Kraken X60 All-In-One Liquid CPU Cooler Review @ Pro-Clockers
- Corsair H60 @ Kitguru
- Cooler Master Seidon 120M AIO Water-Cooling Unit Review @ Pro-Clockers
- Corsair Carbide 200R @ techPowerUp
- NZXT Phantom 820 Full-Tower Gaming Chassis @ Bjorn3D
- Corsair Carbide Series 200R Mid-Tower Comptact ATX Chassis @ eTeknix
- Lian Li PC-A55B Mid Tower Review @ XtremeComputing
- Cooler Master HAF XB @ Guru of 3D
- Fractal Design Node 605 Case Review: Is Fractal Design Ready for Primetime? @ AnandTech
Subject: Cases and Cooling | November 9, 2012 - 02:09 PM | Jeremy Hellstrom
Tagged: nzxt, phantom 820
NZXT may have originally made their name in the lower end of the case market but that doesn't mean that they cannot build a high end case successfully. That is exactly what the $250 Phantom 820 is, with LEDs, an integral fan controller, well designed fan screens from top to bottom and an impressive array of extra screws, connectors and even covers for your USB ports. While you can install quite an array of 120mm and 140mm fans the case comes with an impressive 200cm fan preinstalled. All together, the quiet operation and impressive cooling capabilities netted this case a Gold Award from [H]ard|OCP.
"The NZXT Phantom 820 Full-Tower case is chock full of enthusiast features; multiple fan placements with consideration for chassis airflow, designed for custom water cooling as well as fully contained water cooling solutions, rear panel I/O lighting, room for plenty of wiring, a sleek window, all literally on a pedestal."
Here are some more Cases & Cooling reviews from around the web:
- BitFenix Prodigy Mini ITX Case Review @ Hardware Canucks
- Aerocool Mechatron Full-Tower PC Chassis Review @ eTeknix
- COUGAR Challenger Case Review @ OCC
- Thermaltake Armor Revo Gene Mid Tower Case Review @ Legit Reviews
- Antec Three Hundred Two Case Review @ OCC
- Thermaltake Overseer RX-I Chassis @ Bjorn3D
- InWin GRone Full-Tower Chassis @ Tweaktown
- InWin GRone Full-Tower Chassis @ Bjorn3D
- Cougar Challenger Mid-Tower Chassis Review @ eTeknix
- NEXUS Prominent 5 Midi Tower Review @ NikKTech
- CmStorm Scout 2 computer case @ Rbmods
- BitFenix OUTLAW Midi Tower Review @ NikKTech
- Nanoxia Deep Silence 1 Mid-Tower Case Review @ Legit Reviews
- GameTiger Triple Case Roundup Review @ OCC
- Reeven ColdWing 12 Fan Series Review @ eTeknix
- Corsair Air Series Fans Review @ Madshrimps
- 120mm Fan Roundup: 1350 RPM or Lower Rotation Speed @ X-bit Labs
- Phanteks PH-TC90LS Low-Profile CPU Cooler @ Tweaktown
- Zalman CNPS9900DF Silent CPU Cooler Review @ Hi Tech Legion
- Cooler Master TPC 800 Vapour Chamber CPU Cooler Review @ eTeknix
- Phanteks PH-TC90LS CPU Cooler Review @ Hardware Secrets
- Zalman CNPS9900DF Dual Tower CPU Cooler @ Tweaktown
- Zalman CNPS14X CPU Cooler @ X-bit Labs
- Thermaltake Water 2.0 Pro Liquid Cooling Heatsink Review @ PCSTATS
- Thermalright True Spirit 120M CPU Air Cooler @ [H]ard|OCP
- Silverstone Heligon HE01 Twin Tower Heatsink Review @ Frostytech
- EK-Supremacy KIT H3O 360 HFX Review: Absolute Leader in Liquid Cooling @ X-bit Labs
- Thermaltake Water 2.0 Performer Liquid Cooling Heatsink Review @ Frostytech
- AMD FX-Series Liquid Cooling Heatsink Review @ Frostytech
Subject: Cases and Cooling | October 31, 2012 - 05:18 PM | Jeremy Hellstrom
Tagged: watercooling, all-in-one, nzxt, Kraken X40, Kraken X60
30th October, 2012 – High performance liquid cooling has finally arrived in an easy to use, all-in-one package. NZXT releases the Kraken, the first premium all-in-one water cooler series for PC enthusiasts and gamers alike. The Kraken X40 and Kraken X60 are high end, all-in-one 140mm and 280mm liquid-cooling solutions where ease of use meets unmatched performance.
Applying its forward-thinking design philosophy to the water-cooling market, NZXT raises the bar with a userfriendly solution that brings unrivaled liquid-cooling performance to your fingertips. With 36% more surface area than standard 120mm/240mm radiators and fully interactive fan control, NZXT’s Kraken series is nothing short of a water-cooling behemoth.
NZXT brings its innovative HUE controlled lighting system to the Kraken, setting a new standard for design and performance. Featuring premium black sleeved cables and extended 16-inch tubing for large tower support, the Kraken brings high performance cooling with an uncompromised look that any enthusiast will be dying to show off.
At its core, the Kraken features a state-of-the-art pump attached to an all copper base that is compatible with all of the current offerings from Intel and AMD. Included with the 140mm Kraken X40 is one NZXT FX-140 PWM fan, with the ability to install an additional 140mm fan for a push-pull configuration, offering unmatched cooling performance.
The 280mm Kraken X60 features two NZXT FX-140 PWM fans, with the ability to install an additional two fans for a push-pull configuration as well. Additionally, the Kraken X60 utilizes a SATA power connector for easy installation and effortless cable management.
Both Krakens are aggressively priced at $99 and $139 for the X40 and X60, respectively, and backed by a 2 year warranty. With the Kraken, NZXT set out to unleash the best closed loop water cooler on the market, and believes its customers should not settle for anything less.
Subject: General Tech, Shows and Expos | June 13, 2012 - 09:03 AM | Jeremy Hellstrom
Tagged: trinity, spire, Silverstone, rosewill, nzxt, corsair, computex 2012, computex, asus, amd
The Tech Report found a few more Computex 2012 pictures to show off, including a teaser from NZXT of the previous Phantom model as the new model is still under NDA, no such problem for the case modders showing off at the Thermaltake booth nor for InWin and their new H-Frame case. Sticking with the cooling motif is this new fan from Spire which uses a new type of bearing to provide a longer life and Corsair's two new lineups of 120mm and 140mm fans, the AF series designed to maximize air flow through a case and the SF series for heatsinks and radiators which benefit more from the increased static pressure larger fan blades can provide. From Rosewill they spotted a silent PSU, SilverStone a SFX model perfect for an HTPC and big 1200W digitally controlled PSU from Corsair. Wrap up the tour with some bad news about the expected delay of Trinity on the desktop and some good news for audiophiles from ASUS' Xonar team.
"We've wrapped up our Computex coverage with another round of news. On tap: the PSUs and case mods that stood out at the show, new fans from Corsair and Spire, a chat with Asus' Xonar audio team, details on NZXT's next-generation Phantom enclosure, and word of a delay to AMD's desktop Trinity APU."
Here is some more Tech News from around the web:
- AMD and ARM joined by Imagination, TI, and MediaTek @ SemiAccurate
- AMD 2013 APUs To Include ARM Cortex-A5 Processor For TrustZone Capabilities @ AnandTech
- TSMC reiterates supply of 28nm chips to come close to demand in 4Q12 @ DigiTimes
- TSMC joins giant fab race @ The Register
- Open Rail, or, why didn’t we think of this? @ Hack a Day
- nstall Windows 8 from a USB Drive, Dual-boot with XP, Vista and 7 @ TechSpot
- Netgear ReadyNAS Duo v2 @ Legion Hardware
- Computex: Thunderbolt is coming, slowly for now @ Kitguru
Subject: Cases and Cooling | May 16, 2012 - 12:28 PM | Tim Verry
Tagged: switch 810, special edition, nzxt, cases, atx
Popular case manufacturer NZXT has announced a special edition of it’s Switch 810 computer case. After listening to customer feedback, the company has decided to make the case available in two new colors. Gunmetal and Matte Black are the two new darker themes of the Switch 810.
In a recent press release, NZXT stated that the two new available colors are its way of showing their fans that they do listen to and value feedback.
Specifically, “Without our community’s valuable feedback and criticisms, our products would not be as unique as they are today. We always aim to maintain customer satisfaction through providing high quality products at great prices, which is why we decided to release the Special Edition to feature two of the most demanded color palettes from our loyal fans: Matte Black and Gunmetal.”
The Switch 810 is a full tower ATX case constructed of steel and plastic materials. It features support for up to 10 fans, six internal hard drives, up to an E-ATX motherboard, and plenty of room for custom liquid cooling solutions. The case also provides cable management cut-outs and tool-less drive bays.
The new Special Edition Switch 810 is available for purchase now from NZXT in either Gunmetal or Matte Black colors for $179.99 USD. When we reviewed the original version of the Switch 810, we gave it the PC Perspective Gold Award for its included enthusiast features and good execution. You can find our full review (including video) here.
Subject: Cases and Cooling | February 8, 2012 - 06:14 PM | Jeremy Hellstrom
Tagged: nzxt, switch 810
We've come a long way from the chunky off-white cases of yesteryear, so far that white cases are coming back into style. Thankfully they are a true white and not the spoiled milk white which we were used to. NZXT's latest enclosure, the Switch 810 is a great representation of this trend with a white external colour scheme which hides features an IBM PS2 users couldn't have imagined in their wildest dreams. The case offers great air cooling but was really designed with those using watercooling. Legit Reviews did run into some issues when mounting SSDs and suffered a bit of sticker shock but do recommend the case for those using external radiators.
"We were very impressed with several of the innovative features that NZXT put on the Switch 810, especially the consideration for pretty extreme water cooling setup with that 85mm of top clearance. The ability to drop a 420mm rad in the top and another 280mm rad in the bottom should be enough cooling for even a quad GPU setup. Placing easy to access filters on the intake fans is a real plus and should keep the dust bunnies to a minimum..."
Here are some more Cases & Cooling reviews from around the web:
- Azza Fusion 3000 Full Tower Chassis Review @ OCIA
- BitFenix Raider Mid-Tower @ Tweaktown
- NZXT Switch 810 Case Review @ Hardware Canucks
- Antec Eleven Hundred Review @ Neoseeker
- Antec Eleven Hundred Case Review @ HardwareHeaven
- NZXT Phantom 410 Case @ TechwareLabs
- Cooler Master Cosmos II @ techPowerUp
- Antec ONE Preview @ techPowerUp
- Antec Three Hundred Two Case Review @ Hardware Secrets
- Xigmatek Midgard II Mid-Tower Chassis @ Tweaktown
- BitFenix Raider ATX case Review @ XtremeComputing
- Thermaltake Chaser MK-1 PC Case @ Pro-Clockers
- Noctua NF-B9, NF-P12, NF-R8 Fans @ Rbmods
- Which is the Best Place to Install a Case Fan? - Part 2 @ Hardware Secrets
- Enermax ETS-T40-VD CPU Cooler Review @ eTeknix
- Cooler Master GeminII M4 CPU Cooler Review @ Madshrimps
- "Super 5": Super-Coolers on LGA 2011 Platform @ X-bit Labs
- Cooler Master Gemin II @ XSReviews
Get notified when we go live!