Subject: General Tech, Cases and Cooling | April 8, 2014 - 08:44 PM | Scott Michaud
Tagged: cpu cooler, NH-D15, noctua
Known primarily for large and quiet CPU coolers, Noctua is not shy to attach a pair of 140mm fans to a chunk of metal. The NH-D15, announced today, can cool just about any current, mainstream or enthusiast CPU from AMD or Intel. It attaches to the CPU with a copper plate, which is connected to several copper heatpipes, which leads into two towers of aluminum fins. It is plated with nickel to prevent corrosion (I am not sure about the bottom).
As is common for these types of heat sinks, they are daunting to look at. Of course, that is not a bad thing, unless you have a very small case, but it might make you look at your stock fan differently. Noctua is claiming that their two fans spin at a maximum of 1500 RPM and a minimum of 300 RPM. This leads to a listed maximum noise value of 24.6 dBA, around the background noise of a quiet rural area at night.
The NH-D15 will be available mid-April for just shy of $100 USD.
Introduction and Technical Specifications
Courtesy of Noctua
Noctua is a well known name in the enthusiast world for its high-end CPU cooler products. Their flagship cooler, the NH-D14, features a nickel-plated copper base with dual radiator towers actively cooled by low noise 120mm and 140mm fans. The NH-D14 can be used with all current Intel and AMD CPU offerings. The cooler was put to the test against other similarly classed air and water-based cooling systems to see just how well Noctua's design would hold up. The Noctua NH-D14 does not come cheap with a retail price at $99.99, but its performance and utility should make up for that initial outlay.
Courtesy of Noctua
Courtesy of Noctua
The Noctua NH-D14 cooler is everything you would expect in a premium CPU cooler - nickel-plating for corrosion resistance, twin-tower radiators for massive heat dissipation potential, and copper / aluminum hybrid design for optimal heat transfer from the CPU. Noctua designed the NH-D14 with a total of six heat pipes, laid out in a U-shaped design which passes through the copper base plate and terminates in the radiator towers. The bottom of the copper base plate leaves the factory ground flat and polished to a mirror-like finish, ensuring optimal interfacing with the CPU surface.
Courtesy of Noctua
Noctua included the following components in with the base cooler: SecureFirm2™ multi-socket mounting kit, NF-P14 140mm fan, NF-P12 120mm fan, four fan mounting brackets, a dual-ended fan power cable, two single-fan low power cables, a case badge, and NT-H1 thermal compound.
Subject: Cases and Cooling | November 25, 2013 - 01:37 PM | Jeremy Hellstrom
Tagged: noctua, NH-U12S, heatsink
Noctua have attempted to strike a balance between performance and profile with the NH-U12S, slimming it down to allow for tall heatspreaders to be used on RAM but without shaving off too much performance. From the tests performed at [H]ard|OCP it seems that Noctua did exactly what they claimed, there is plenty of space to fill all your DIMM slots with any brand of RAM and the performance at stock speeds was better than average. It is a little more expensive than some alternatives and is not the best at cooling an overclocked CPU but but of you want a slim profile and reasonably quiet performance this is a good choice.
"The Noctua NH-U12S is well known in enthusiast circles for a few reasons. Noctua states it is because, "the NH-U12S is a complete premium quality solution that combines outstanding performance, quiet operation and excellent compatibility." And quite frankly Noctua would be very correct. Where does the value stand today?"
Here is some more Tech News from around the web:
- Scythe Mugen 4 @ techPowerUp
- Phanteks F140HP 140mm PWM Fan Review @HiTech Legion
- Zalman Reserator 3 Max AIO Liquid CPU Cooler @ eTeknix
- Cooler Master Nepton 140XL Cooler Review @ Modders-In
- Cooler Master Nepton 280L Review @ OCC
- Corsair H80i @ LanOC Reviews
- Cooler Master Nepton 140XL AiO Liquid CPU Cooler Review @HiTech Legion
- Corsair Hydro H75 CPU Cooler @ Kitguru
- Aerocool Strike-X One Advance @ Kitguru
- NZXT Source 530 Full Tower Computer Case Review @ Legit Reviews
- Corsair Graphite 230T @ Hardware.info
- Cooler Master HAF Stacker Review @ Hardware Canucks
- BitFenix Phenom Micro-ATX Chassis @ eTeknix
- Lian Li PC-A79 @ eTeknix
- Phanteks Enthoo Primo Case @ Benchmark Reviews
- Cooler Master Cosmos SE @ techPowerUp
- Fractal Design Arc XL High Airflow Full Tower Case Review @ Legit Reviews
- Enermax iVektor (ECA3310) Mid-Tower Case Review @HiTech Legion
- Enermax Fulmo ST Midi Tower @ NikKTech
- Rosewill Galaxy-03 Mid-Tower PC Case Review @ Legit Reviews
Subject: General Tech, Cases and Cooling, Shows and Expos | June 22, 2013 - 01:43 PM | Scott Michaud
Tagged: noise cancellation, noctua, computex 2013, computex
Update (June 22-2013, 4:43pm EDT): I was contacted by Noctua about the TDP ratings... quoting from their email:
As for the question regarding the TDP rating of the original NH-D14, I'd like to stress that the cooler can *easily* handle any 130W CPU! Our D14 is renowned to be among the best performing heatsinks for overclocking on the market and and many users have pushed their CPUs well beyond 250W using this cooler.
Noctua apparently does not like including TDP values for their coolers because it varies heavily on the conditions (such as, of course, room and case temperature). It makes sense, of course, because then customers would go looking at reviews and see what overclocks were achieved with the system.
Yes, I know Computex is long over, but I missed something that I want to cover.
Noctua has been teasing active noise cancellation (ANC) for their CPU coolers for quite some time now; Tim published his brief thoughts, 13 months ago, on their press release leading up to Computex 2012. The prototype, this year, is a full unit rather than the fan from last year.
This design is a modified NH-D14 cooler with added technology from RotoSub AB to sample its own noise and destructively interfere. According to Noctua, this will be the first ANC cooling unit for a CPU. The plan, as their press release suggests, is to release a cooler with the model named "R-ANC" after its (R)otoSub (A)ctive (N)oise (C)ancellation (R-ANC) technology. To me, this seems like a confusing choice in name as it breaks away from their existing standard and limits choice in name for future models based on this technology. Personally, I would have preferred to see "NH-D14R" or "NH-D14ANC", but alas I am not a marketer.
Also, in the process of researching for this article, I have been unable to find a canonical TDP-rating for this device. I was not too surprised to have a difficult time finding it for this unreleased product, but TDP is even omitted from the established, albeit louder, default NH-D14. Some sources claim this cooler can support an Intel i7 Extreme processor, which typically requires a 130W thermal dissipation; other sources say you should be somewhat cautious with this cooler with CPUs >95W TDP; some even claim it is great for air-only overclocking. Rolling all of these sources together, assuming a kernel of truth in each, I would assume this cooler (and, by extension, its upcoming R-ANC variant) would be good for decent air-only overclocks until you reach the -E series.
But, grain of salt, have some.
No word of pricing, but Noctua believes they will have it available spring/summer of next year. For some reference, the default NH-D14 can be found for about $75-$100; expect the R-ANC to be slightly north of that.
Austrian PC Cooling manufacturer Noctua has released a new fan called the NF-A14. The new fan is PWM controlled and aimed at case or watercooling radiator cooling. The NF-A14 uses a square frame and features higher static pressure than the NF-P13 along with a maximum speed of 1500RPM.
The fan kit comes with the fan itself, mounting screws, a rubber mounting system to reduce vibration, a 30mm extension cable, low-noise adapter, and a 4-pin Y splitter cable that allows two PWM fans to be connected to a single motherboard fan header. The new Noctua NF-A14 comes with a 6 year warranty.
You can find more information on Noctua’s website as well as the full press release after the break.
In other cooling news:
Subject: Cases and Cooling | April 26, 2013 - 12:30 AM | Tim Verry
Tagged: noctua, nh-l9a, hsf, cooler, mini-itx, low profile cooler
Noctua, an Austrian company known for its high-end air CPU coolers has announced that it will be offering up alternatvie mounting kits to users of its low profile NH-L9a cooler that have incompatible motherboards. Certain mini-ITX motherboards that place components on the back of the motherboard around the processor socket are incompatible with the company’s existing SecureFirm 2 mounting kit because the backplate cannot be installed.
The new alternative mounting system for the NH-L9a CPU cooler uses Noctua’s NM-APS3 spacers that go in place of the standard backplate. The spacers go in between the motherboard and screws, but are small enough to not run into any components installed in the area normally reserved for a CPU backplate. Two such boards that Noctua has found to be incompatible are the mini-ITX AsRock FM2A75M-ITX and AsRock FM2A85X-ITX.
Users with an incompatible motherboard and NH-L9a cooler can obtain the alternative mounting kit for free by contacting Noctua’s customer service line and providing them with a proof of purchase (scan, photo, or electronic invoice) receipt for both the Noctua cooler and an incompatible motherboard. Additionally, Noctua will be including both the standard SecureFirm 2 and alternative mounting kits in the retail NH-L9a cooler box from now on.
It is nice to see Noctua continuing its tradition of good customer care. They many not be as popular as other cooler vendors in the US but it seems they are a company willing to go the extra mile for its enthusiast customers.
Subject: Cases and Cooling | April 8, 2013 - 08:14 PM | Tim Verry
Tagged: tower cooler, noctua, nh-u, air cooling
Noctua has launched two new single-tower air coolers in the NH-U series. The new NH-U12S and NH-U14S slim tower coolers come in both 120mm and 140mm sizes respectively. The air coolers are slim-enough to be installed in most system configurations, even with tall RAM heat-spreaders in use.
The Noctua NH-U12S is an updated version of the company's NH-U12P-SE2 cooler. It features a 45mm thick tower heatsink paired with a 120mm NF-F12 fan.
On the other hand, the NH-U14S is Noctua's first air cooler sporting a 140mm fan. The cooler is 52mm thick, and is compatible with Intel's enthusiast LGA 2011/X79 platform. Further, it uses NF-A15 140mm fan that provides ample cooling power at lower RPMs (which means less noise, ideally).
Both the NH-U12S and NH-U14S air coolers include Noctua's SecureFirm 2 mounting system, NT-H1 thermal compound, and PWM-controlled fans. Users can also attach the low-noise adapter to reduce the maximum fan speed from 1500 to 1200 RPM should they value quiet operation over maximum performance. Noctua is supporting both air coolers with a 6 year manufacturer warranty.
Both the 120mm NH-U12S and 140mm NH-U14S will be "available shortly" according to Noctua. The NH-U12S has an MSRP of $64.90 USD (59.90 EUR), while the larger NH-U14S is priced at $79.90 USD (69.90 EUR). In all, they appear to be decent air cooling options, and Noctua has demonstrated quality support in the past (such as the free Haswell mounting kit upgrades for older HSFs). Personally, I'm interested to see how the 140mm unit performs.
Subject: General Tech | March 20, 2013 - 12:05 AM | Tim Verry
Tagged: noctua, lga 1150, hsf, heatsink, haswell, cpu cooler
Noctua has recently announced that the company is providing free mounting kits to owners of existing coolers to make them compatible with Intel's latest LGA 1150 (Haswell) motherboards. The new NM-i115x mounting kit will allow enthusiasts to recycle their older Noctua coolers with the new platform without issue. The kit includes a new back plate with fixed struts and the necessary connectors (screws, springs, et al) to make alignment and mounting easier than previous setups.
Because the LGA 1150 socket keeps the same mounting hole spacing as the current LGA 1156 and LGA 1155 sockets, many newer Noctua cooler will not need the mounting kit upgrade, and can simply be installed into the Haswell machine as is. In other words, if the heatsink worked with your Lynnfield, Sandy Bridge, or Ivy Bridge-based system, it will work in a Haswell system as well. According to Noctua, the following coolers are already compatible with Haswell:
NH-C14, NH-D14, NH-C12P SE14, NH-L12, NH-L9i, NH-U12P SE2, NH-U9B SE2
If your cooler was released prior to LGA 1156, you will need to grab the NM-i115x mounting kit upgrade by filling out this form. Noctua will make the kit available on its website as well as in retail stores (for a minimal charge, though the company did not provide specific pricing). You will need to provide proof of purchase for your existing cooler by sending Noctua a scan or screenshot of your invoice or receipt.
For more information on the NM-i115x, head over to the Noctua product page.
It is nice to see Noctua standing behind its products like this, even if it only affects a small number of users that will be making the jump for LGA 775/ect to LGA 1150.
Subject: General Tech | May 30, 2012 - 09:58 PM | Tim Verry
Tagged: quiet, pc case, noise cancellation, noctua, fans, air cooling
Enthusiast PC fan manufacturer Noctua has announced a partnership with RotoSub to produce fans with active noise cancellation technology. They two companies have already developed a prototype chassis fan that uses fan blade modulation and a series of stationary blades in addition to the moving fan blades to improve performance while keeping the noise down. The noise canceling fan prototype will be shown off at Computex 2012 in Taipei next month (booth J1312 in Exhibition Hall 1F).
In a recent press release, RotoSub and Noctua have announced a “strategic partnership” to develop and market a line of Noctua fans with a new noise cancellation technology from RotoSub. The technology in particular is called the RotoSub Acive Noice Control (R-ANC). It uses phase cancellation principles to cancel out the annoying hum (or whine in those smaller server fans that sound like jet engines) given off by the fans. The fans do this by slightly modifying how the blades spin using proprietary algorithms (hopefully they will release more information on exactly what is going on there), and by including physical features like the stationary set of fan blades behind the moving set of blades.
The prototype Noctua NF-F12 fan that will be on display at Computex 2012.
Mårten Oretorp, RotoSub CTO stated that the company is aiming to achieve 80% more airflow and 120% greater static pressure than the Noctua NF-F12 fan by incorporating the company’s ANC technology. Noctua is licensing the RotoSub technology, which is claimed to deliver better noise-per-performance ratios than can be accomplished by physical aerodynamic improvements alone.
Further, Noctua CEO Roland Mossig stated “it has always been our goal to push the boundaries of acoustic optimisation and this partnership will allow us to reinforce our technology leadership in the field of premium grade PC cooling equipment.”
RotoSub hasn’t detailed the algorithms but they do have hints of information on their page including a video demonstration of the fan and an animation that shows the “anti-sound” being generated by the fan itself to cancel out the annoying fan noises that it produces. The video can be seen below.
It is an interesting concept, and I hope that it works. While moving to watercooling has cut down on the number of fans I’m using in my desktop, it is still not anywhere near what I would call quiet. Stay tuned for more information once the prototype is shown off at Computex 2012.
Subject: Cases and Cooling | October 28, 2011 - 02:24 PM | Jeremy Hellstrom
Tagged: noctua, NH-U12P SE2, NH-D14, NH-C14
Noctua have recently released three new coolers, the NH-U12P SE2, the NH-D14, and the NH-C14, all of which do the same job but in different ways. The Tech Report noticed the colour scheme was very similar to a certain uniform, though the fans have much better airflow than Captain Antilles' throat. The NH-U12P SE2 is 940g, 120 x 126 x 158 mm and uses a 120mm fan, the NH-D14 is a dual tower design with two 140mm fans, is 1240g and 140 x 157.5 x 160 mm and finally the NH-C14 has the heatsink and 140mm fan horizontally aligned, 140 x 166 x 130 mm and weighs in at an even 1000g. Check out the full review at The Tech Report.
"We rarely review CPU coolers here at TR, but we've spent a few months working with a trio of Noctua designs that are really quite impressive. Let's take a closer look to see how they fare."
Here are some more Cases & Cooling reviews from around the web:
- Fostering Better Heatsinks - Does Zalman really use Composite Heatpipes? @ Frostytech
- Alpenfoehn K2 CPU Cooler Review @ Real World Labs
- Cooler Master Hyper 212 EVO Review @ Neoseeker
- Rock-n-Roll from Akasa: Venom Voodoo @ X-bit Labs
- Enermax ETS-T40-TA CPU Cooler Review @ HardwareHeaven
- NZXT HAVIK 140 Cooler @ kitguru
- Rosewill RCX-ZAIO-92 CPU Cooler Review @ Hardware Secrets
- Scythe Mugen 3 PCGH Edition CPU Cooler Review @Hi Tech Legion
- Zalman CNPS12X Lower Noise Heatsink Review @ Frostytech
- Noctua NH-D14 CPU Cooler @ reviewstash
- Phanteks PH-TC14PE Premier CPU Cooler Review @ Hi Tech Legion
- Phanteks PH-TC14PE CPU Cooler Review @ Legit Reviews
- Gelid GX-7 CPU Cooler @ Pro-Clockers
- Xigmatek Prime SD1484 Heatsink Review @ Frostytech
- Alpenföhn Triglav cpu cooler @ Hardwareoverclock
- Xigmatek Gaia CPU Cooler Review @ Hardware Secrets
- Evercool HPL-815 and Transformer 3 Review @ OCC
- Thermaltake Frio OCK @ Bjorn3D
- Prolimatech Panther @ XSReviews
- Titan Dual X Holder TTC-SC07TZ(RB) Review @ OCC
- Antec Soundscience Halo 6 LED Bias Lighting Kit Review @ Techgage
- Bitfenix Merc Alpha Case Review @ Hardware Secrets
- Silverstone Precision PS06 @ techPowerUp
- Antec Solo II Case @ Rbmods
- Raidmax Blackstorm Case Review @ Rbmods
- Corsair 400R Carbide Series Case Review @ HardwareHeaven
- Lancool PC-K9 B Mid Tower Case Review @ Hardware Canucks
- Viako Mini Letter ML-Style @ techPowerUp
- Corsair Carbide 500R Case Review @ Neoseeker
- Corsair Carbide 500R: A Corsair in Every Home @ AnandTech
- Lian Li Cowry PC-U6 Special Edition mATX Case Review @ Hardware Canucks
- BitFenix Outlaw Mid-Tower Case @ Bjorn3D
Get notified when we go live!