Seagate's supersized NASty specialized spinning disks

Subject: Storage | October 23, 2013 - 01:23 PM |
Tagged: NAS, Seagate, 4TB, hdd

Seagate's aptly named NAS HDD looks very much like their 4TB Desktop model but internally it has enhanced vibration reduction as well as parts that are more resistant to vibration which should create a quieter and longer lasting drive.  It also shares 5900 RPM and a 64MB cache but Seagate claims slightly higher seek times, 8.5ms read and 9.5ms write and time-limited error recovery which makes these drives far less dangerous to use in a RAID than the desktop model in scenarios such as Al has mentioned numerous times.  The Tech Report's testing put it against Seagate's Desktop version as well as the WD Red that is also optimized for use in NAS devices, read on to see which gets recommended.

TR_compare-bottom.jpg

"Seagate's NAS HDD 4TB is optimized for network-attached storage and desktop RAID implementations. It promises better reliability than typical desktop drives, too. We take a closer look to see how the NAS HDD compares to its WD Red counterpart."

Here are some more Storage reviews from around the web:

Storage

Subject: Storage
Manufacturer: Western Digital

Introduction

Introduction:

Last July, I went on a bit of a mini-rant about how using a bunch of drives not meant to be in a RAID could potentially lead to loss of the entire array from only a few bad sectors spread across several disks. Western Digital solved this problem by their introduction of the WD Red series. That series capped out at 3TB, and users were pushing for larger storage capacities for their NAS devices. In addition to the need for larger disks came the need for *smaller* disks as well, as there are some manufacturers that wish to create NAS / HTPC type devices that house multiple 2.5" HDD's. One such device is the Drobo Mini - a 4x2.5" device which has not really had a 'proper' NAS storage element available - until now:

130903-053614-9.27.jpg

Today Western Digital has announced a twofold expansion to their Red Series. First is a 4TB capacity in their 3.5" series, and second is a 2.5" iteration of the Red, available in both 750GB and 1TB capacities.

As a recap of what can potentially happen if you have a large RAID with 'normal' consumer grade HDD's (and by consumer grade I mean those without any form of Time Limited Error Recovery, or TLER for short):

  • Array starts off operating as normal, but drive 3 has a bad sector that cropped up a few months back. This has gone unnoticed because the bad sector was part of a rarely accessed file.
  • During operation, drive 1 encounters a new bad sector.
  • Since drive 1 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
  • The RAID controller exceeds its timeout threshold waiting on drive 1 and marks it offline.
  • Array is now in degraded status with drive 1 marked as failed.
  • User replaces drive 1. RAID controller initiates rebuild using parity data from the other drives.
  • During rebuild, RAID controller encounters the bad sector on drive 3.
  • Since drive 3 is a consumer drive it goes into a retry loop, repeatedly attempting to read and correct the bad sector.
  • The RAID controller exceeds its timeout threshold waiting on drive 3 and marks it offline.
  • Rebuild fails.
  • Blamo, your data is now (mostly) inaccessible.

I went into much further detail on this back in the intro to the WD 3TB Red piece, but the short of it is that you absolutely should use a HDD intended for RAID when building one, and Western Digital is removing that last excuse for not doing so by introducing a flagship 4TB capacity to the Red Series.

Continue reading our review of the new WD 3.5" and 2.5" Hard Drives!!

WD Improves Red, expands line to include 4TB and 2.5" form factor

Subject: Storage | September 3, 2013 - 05:00 AM |
Tagged: western digital, wdc, WD, red, NAS, hdd

Today Western Digital launched both a 4TB 3.5" Red, as well as a new 2.5" form factor available in both 750GB and 1TB:

WD Red 4TB et SFF 083013.jpg

The full press blast from WD appears after the break. Once you're done perusing, be sure to check out our Full Review of these two new models!

New Seagate NAS Storage Solution Delivers Industry’s Highest Capacity and Best Performance

Subject: Storage | June 11, 2013 - 05:08 PM |
Tagged: Seagate, NAS

CUPERTINO, Calif.--(BUSINESS WIRE)-- Seagate Technology (NASDAQ:STX) today took the wraps off its new Seagate® NAS HDD—a cutting-edge drive custom-built for always-on, one- to five-bay network attached storage (NAS) systems. Engineered with performance and reliability in mind, the new drives are available in multiple capacity points including a 4TB option—the industry’s highest capacity NAS hard disk drive (HDD) solution available—and strong industry support from nine NAS system partners.

NAS_HDD_Upper_Pen-1000px_72dpi.jpg

“Today about 50 percent of NAS arrays are sold diskless meaning that customers are challenged with identifying and installing the right storage for their system. By developing a drive like NAS HDD, we’ve taken the guesswork out of it and made it easy for customers to identify the right drive for their system,” said Scott Horn, Seagate vice president of marketing. “By collaborating closely with a variety of partners who specialize in NAS systems, we’re making what was a confusing effort into a plug-and-play one.”

Featuring up to 4TB of storage the drive now enables NAS systems, such as those utilized in homes and small to midsize businesses (SMB), to provide up to 20TB of data in a five-bay NAS array. And with over 30 percent capacity improvement over competitive offerings, the NAS HDD 4TB drive delivers the highest capacity available on the market.

Cost effective drives built specifically for NAS solutions, the 4TB option has the capacity to store over 819,000 photos, 1 million songs or nearly 500 hours of high-definition (HD) video content—more than enough space for the average household. It is also ideal for small businesses with large enough capacities to support CAD files, medical images and databases.

“QNAP is thrilled to be teaming up with Seagate to offer our customers a high-performance storage solution optimized for NAS systems,” said Meiji Chang, general manager of QNAP. “The Seagate NAS HDD allows us to deliver the highest capacity storage offering on the market while providing our customers with a huge boost in performance and a reliable business level NAS solution for 24x7 operations.”

“Households and SMBs continue to generate a significant amount of data, and need fast and reliable storage solutions,” said John Rydning, IDC's research vice president for hard disk drives. “Rather than taking hours or days to transfer a large amount of digital content over the internet to a cloud storage service provider, Seagate’s new NAS HDD provides a high-capacity solution for fast data transfers and backups on-premise over local networks.”

Built to provide up to 10 percent performance advantage over the competition for 24x7 NAS applications, the NAS HDD is engineered for performance in always on applications and can support multiple HD video streams and user profiles. The drive boasts near silent acoustics operating below the range of audible sound for the human ear with as low as 1.9 bels, providing optimized acoustics for the home or SMB environment. It also features Seagate’s own NASWorks™ technology which improves drive reliability by supporting features that limit drive vibrations and support extended error recovery controls for better data integrity.

Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems. Key features of the NAS HDD include:

  • Industry’s Highest Capacity NAS Drive—up to 4TB available, the NAS HDD offers a 30 percent capacity advantage over the competition.
  • Best Performance for 1- to -5-bay NAS Systems—built and tested to provide industry-leading performance, NAS HDDs offer the industry’s highest throughput to deliver the performance demanded by NAS solutions.
  • NASWorks—supports error correction via customized error recovery controls, power management and vibration tolerance for optimal performance and reliability in a 1- to 5-bay solution.
  • Improved Vibration Tolerance—dual-plane balance supports the unique weighted motor design minimizing vibration that can be amplified in multi-drive systems improving the drive’s performance and system reliability.
  • Advanced Power Management—supports multiple user-selectable power profiles that can optimize power usage for different workloads to minimize power consumption while maintaining high-availability performance.
  • Quiet Drive Operation—enhances the end customer experience with near-silent acoustics for low-noise environments like living rooms or office spaces.

Designed with compatibility in mind, Seagate NAS hard disk drives have been rigorously tested by some of today’s top NAS providers and flawlessly integrated into their NAS solutions. For more information on the Seagate NAS HDD and qualified OEM partners please visit www.seagate.com/www/nashdd.

Source: Seagate

Synology Launches DSM 4.2 NAS Management Software

Subject: Storage | March 7, 2013 - 09:21 PM |
Tagged: synology, storage, networked attached storage, NAS, dsm 4.2

Synology recently took the wraps off its latest NAS management software, called DiskStation Manager (DSM) 4.2. The new software suite is available as a free update for a number of its products.

Diskstation Manager provides a number of features for home and business uses. Business users are now able to take advantage of Synology High Availability duplication on all x86-based NAS products. A RAIDIUS server, SSL encryption between devices and Diskstation Cloud, and two step authentication are among the available security features with DSM 4.2.

Synology DSM 4-2.png

DSM 4.2 comes with a web-accessible user interface and desktop-like environment. You can access all its features in a GUI, see disk/RAM/CPU usage, schedule tasks, and even PXE boot other networked machines. Some of the updated software bits include Cloud Station, Photo Station, File Station, Video Station, and Audio Station.

Cloud Station now has 52% faster file transfers to Mac OSX computers. Further, DSM 4.2 supports almost-unlimited user accounts, LDAP, Active Director, and Amazon’s Glacier backup service. File station now supports hot keys. Video Station has a revamped user interface that supports MKV subtitles, HDHomerun DVB-T tuners with mutli-channel TV streaming and recording. Users can also watch movies over the network on DLNA devices or Apple’s AirPlay. DSM 4.2 supports the use of smartphones as remote controls to control playback of media. Finally, Audio Station has added Bluetooth A2DP streaming support, and Photo Station supports file drag and drop and improved thumbnail generation speeds.

Synology_Cloud_Services.jpg

DiskStation Cloud now supports automatic backup and file synchronization of media stored on iOS and Android devices. DiskStation Video adds support to stream media to smartphones and DiskStation Photo+ has the Dropbox-like automated backup of photos from your smartphone. DSM 4.2 further features QuickConnect, which takes care of port forwarding automatically. QuickConnect is compatible with DS Photo+, DS Audio, and DS Cloud.

According to Synology, the following devices are eligible for a free update to DSM 4.2. Users can update by manually downloading and applying the update or by going through the updater in the DSM software itself.

"Synology DSM 4.2 is free to download for users who own a DiskStation or RackStation x09 series and onward. Supported models include: DS213+, DS413, DS213, DS413j, DS213air, DS2413+, DS713+, RS10613xs+, RS3413xs+, DS712+, DS212, DS212+, DS212j, RS212, RS812, DS1512+, DS1812+, DS3612xs, RS3412xs, RS3412RPxs, DS112j, DS112, DS412+, RS812+, RS812RP+, RS2212+, RS2212RP+, DS112+, DS3611xs, RS3411xs, RS3411RPxs, DS2411+, RS2211+, RS2211RP+, DS1511+, RS411, DS411, DS411+II, DS411+, DS411j, DS411slim, DS211+, DS211, DS211j, DS111, DS1010+, RS810+, RS810RP+, DS410, DS410j, DS710+, DS210+, DS210j, DS110+, DS110j, DS509+, RS409+, RS409RP+, RS409, DS409+, DS409, DS209+II, DS209+, DS209, DS209j, DS109+, DS109, DS109j, and DS409slim"

Also read: ioSafe N2 - The Performance NAS is now Disaster-proof @ PC Perspective.

Source: Synology

Podcast #241 - Sony VAIO TAP 20, ioSafe N2 NAS, new Z77 motherboards and more!

Subject: General Tech | March 7, 2013 - 01:00 PM |
Tagged: podcast, sony, tap20, vaio, iosafe, n2, synology, NAS, Z77, dragon, msi, pata, apacer, seasonic, thermaltake, urban

PC Perspective Podcast #241 - 03/07/2013

Join us this week as we discuss the Sony VAIO TAP 20, ioSafe N2 NAS, new Z77 motherboards and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath and Allyn Malventano

This Podcast is brought to you by MSI!

Program length: 1:04:57

Podcast topics of discussion:

  1. 0:01:25 We did a Tomb Raider stream
  2. Week in Reviews:
    1. 0:04:00 Seasonic Platinum Series 460 watt fanless PSU
    2. 0:07:10 Sony VAIO Tap 20 Touchscreen AIO
    3. 0:13:20 ioSafe N2 Performance, Disaster-proof NAS
  3. 0:22:2 00 This Podcast is brought to you by MSI!
  4. News items of interest:
    1. 0:24:25 ASUS PadFone Infinity from MWC
    2. 0:27:10 Apacer Launches New PATA SSDs
    3. 0:32:00 Seagate will cease 7200 RPM mobile HDDs this year
    4. 0:34:50 Thermaltake launches Urban S21 case
    5. 0:38:55 Double your HDD density with HGST
    6. 0:43:00 MSI has new gaming series of MB coming out, based on Z77
    7. 0:49:30 NVIDIA refreshes Quadro with Kepler GPUs
  5. Closing:
    1. 0:53:00 Hardware / Software Pick of the Week
      1. Ryan: AMD Mini-PC with A8-4555M
      2. Jeremy: When EyeFinity won't work this might save you
      3. Josh: Good board for cheeeap
      4. Allyn: Chrome beta shows which tabs are playing audio
      5. Morry: XPXS RX360 & old but still kicking
  1. 1-888-38-PCPER or podcast@pcper.com
  2. http://pcper.com/podcast
  3. http://twitter.com/ryanshrout and http://twitter.com/pcper
  4. Closing/outro

Be sure to subscribe to the PC Perspective YouTube channel!!

 

Subject: Storage

Introduction, Specifications, and Packaging

Last year we did a combined review of the ioSafe SoloPRO and the Synology Diskstation 212+ NAS solution. The ioSafe handled the function of disaster-hardened storage, capable of withstanding a typical building fire along with the resulting drenching from your friendly neighborhood fire department, while the DiskStation made the USB-connected ioSafe available to the network and added numerous additional features as part of its excellent DSM software suite, offering many features to both both home and business users:

5-lit.jpg

The whole time I was working on that article, I kept wondering how cool it would be if both items were combined into one unit. You could then get the additional benefit of multi-drive redundancy *and* the disaster-proof protection offered by the ioSafe. Well, that just happened:

slideshow_n2_1.png

Behold the ioSafe N2!

Read on for the full review!

CES 2013: Corsair Voyager Air Offers Wireless Mobile Storage and Home NAS Support

Subject: General Tech, Networking, Storage, Mobile | January 8, 2013 - 06:00 AM |
Tagged: wi-fi, Voyager Air, NAS, mobile, corsair, CES

01-VoyagerAir_K3_ON.png

The newest member member of the Corsair Voyager family of devices, the Voyager Air, drives Corsair's entry into the home networking arena with their all-in-one mobile drive and home NAS (network attached storage) solution.

VoyagerAir_R1_ON.png

Courtesy of Corsair

The Voyager Air is as versatile as it is sleek, with support for the following hiding beneath its stylish hood:

 

  • Up to 1TB capacity drive
  • Rechargeable battery
  • Wi-Fi (802.11n/b/g), GigE Ethernet, and USB 3.0 support built-in
  • Wireless hub support for shared internet support via passthrough technology

03-va-snuggies-white.png

Courtesy of Corsair

The Voyager Air comes in a variety of colors as well, more than enough to match anyone's sense of style. According to Corsair, the Voyager Air units should be accessible at an electronics retailer near you in a 500GB model for $179.99 MRSP and a 1TB model for $219.99 MSRP.

Press release after the break.

 

Coverage of CES 2013 is brought to you by AMD!

PC Perspective's CES 2013 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

CES 2013: Seagate Announces Central Shared Storage Backup and Streaming Box

Subject: General Tech | January 7, 2013 - 06:21 AM |
Tagged: remote access, NAS, media streaming, DLNA, central shared storage, backup, ces 2013, CES, Seagate

At this year’s Consumer Electronics Show, Seagate announced a new home backup and media streaming box that it is calling the Seagate Central Shared Storage. Featuring a form factor well suited to your AV rack in the living room or next to the PC, the Central Shared Storage box will act as a NAS and DLNA server with additional software that enables automatic backup of multiple PCs throughout the home and Facebook photos. The Seagate software will run on computers running either Windows or OSX and will organize audio, video, images, and documents for viewing and streaming on a variety of devices.

Seagate-Central-72ppi-1000px_webready.jpg

In addition, the Central Shared Storage box will also back up your photos stored on Facebook. You can stream or access multimedia on mobile devices (using the Seagate Media App), PCs, or Samsung Smart TVs and Blu-ray players. ON the mobile side, Samsung supports IOS, Amazon (Kindle HD), and Android devices. You can also access your stored content from afar with the remote access feature. social network accounts. Samsung Smart TVs and Blu-ray players will further offer up a customized interface for the viewing your music, movies, and photos on the big screen TV.

It will be interesting to see what the performance is like over the network, and whether the software required for auto-backup is worth using. Unfortunately, there is no word on Linux support, but it may still be possible to get Linux computers backed up to the NAS using something like Wine.

The Seagate Central Shared Storage will be available in March 2013 and will come in three capacities. The MSRPs are as follows:

  • 2TB is $189.99
  • 3TB is $219.99
  • 4TB is $259.99

You can find the full press release here.

Coverage of CES 2013 is brought to you by AMD!

PC Perspective's CES 2013 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Seagate

Kickstarter begins for Transporter: Internet Connected Private Storage

Subject: Storage | December 6, 2012 - 07:12 AM |
Tagged: transporter, storage, NAS, cloud

I was recently briefed on an interesting new product called the Transporter, a file sharing device engineered by the same folks that took part in the creation of the Drobo. Connected Data has launched a Kickstarter campaign to fund its production, so I am now free to talk about it. Here's what it looks like:

58b5c5727a98ef45769c172268f91d47_large.jpg

Transporter is basically a local area network share. It connects to your router via Gigabit Ethernet (and reportedly runs at close to HDD throughput). With the software installed to your local PCs or Macs, it enables folder sharing and real-time syncing to any other Transporter-equipped location (i.e. a family member). There will also be versions of Transporter with 1TB or 2TB internal hard drives, which shift the file storage burden off of the local computers, if desired.

This may sound a lot like other cloud-based sharing solutions out there, but there are some very significant differences:

  • User data is only stored on local systems or shared with other user-invited locations (via their Transporter).
  • The capacity shared is only limited by your local storage capacity (plus whatever internal storage is installed into the Transporter via its internal 2.5" drive bay).

203b5d0a383e2ace3ed37cd5651faf6c_large.png

To put it simply, Transporter is similar to Dropbox in functionality and convenience, but your data is *only* stored privately, and there are no subscription fees or storage limits (beyond that of your local storage capacity). The Kickstarter has only been going for a few hours, and the 'early adopter' pre-orders are more than half gone. Once the 'early' orders are used up, price for a bare Transporter goes from $149 to $179. 1TB models go for $269 and 2TB for $359. We're definitely keeping our eye on this one.

Source: