Cooler Master Launches New N400 and N600 N-Series Cases

Subject: Cases and Cooling | July 9, 2013 - 05:33 PM |
Tagged: n600, n400, mATX, cooler master, atx

Cooler Master recently launched two new N-series ATX computer cases in the US. The new N400 and N600 will join the existing N200 mini tower.

The two new polymer computer cases feature a full mesh front panel, support for 240mm water cooling radiators on the right side panel, seven PCI expansion slots, and room for several storage drives and fans. Front IO on the N400 and N600 cases include two USB 3, two USB 2, and two audio ports.

The N400 is the smaller of the two at 7.5” x 16.7” x 19.7.” It supports graphics cards up to 320mm as well as motherboards of mATX or ATX form factors. Further, the N400 can support two 5.25” optical drives, eight 3.5” hard drives, and three 2.5” solid state drives (SSD).

Cooler Master N400.jpg

The case has space for up to eight fans, and Cooler Master has pre-installed two 120mm XtraFlow fans. Dust filters cover the front and side intake vents.

Cooler Master N400 Internal.jpg

The internals of the N400 are a bit more basic than those of the N600. There are no cable routing grommets or water cooling grommets that pass through the rear panel. As a result, this case should be cheaper than the N600.

The Cooler Master N400 is available now for $60

In addition to the N400 and N200, Cooler Master will be releasing the N600. The N600 builds upon the n400 design by adding more drive space and a few extra features to aid in cooling and cable management. The N600 measures 8.1” x 17.9” x 18.9.”

Cooler Master N600.jpg

It supports both Micro ATX and ATX motherboards as well as graphics cards up to 430mm long. As far as cooling goes, users can install up to 10 fans, and Cooler Master bundles in two 120mm XtraFlow fans. A 240mm water cooling radiator can be installed in the right side panel as well as the top panel. Also, water cooling grommets are installed on the back case panel to allow for external water cooling radiators.

The case can support up to three 5.25” drives (tool-less), seven 3.5” drives, and five 2.5” SSDs (four in an SSD drive cage and one behind the motherboard tray). It also supports a bottom mounted PSU and has various rubber grommets around the motherboard tray for cable management.

Cooler Master N600 Internal.jpg

The N200, N400, and N600 were available in Europe in June, and now all three are coming to the US. You can grab the N200 and N400 right now for $50 and $60 respectively, but specific pricing and availability on the N600 is not yet available. It should be coming soon for around $90 (estimated), however. 

In all, the N400 and N600 seem like decent additions to the company’s N-series lineup. More information can be found on the Cooler Master website.

Cooler Master Launches New N-Series Cases

Subject: Cases and Cooling | May 8, 2013 - 03:43 PM |
Tagged: cooler master, n200, n400, n600, atx case

PC case and cooling manufacturer Cooler Master has launched a slew of new cases, including the N200, N400, and N600 cases. The new N series spans from Micro ATX to full tower cases. All three cases are black with mesh fan grills with front IO that supports two USB 3.0, two USB 2.0, and two audio ports.

Cooler Master N400 Mid-Tower Case.jpg

The N200 is the smallest of the three cases. It is constructed of steel (with a plastic front bezel) and measures 202 x 378 x 445mm. The N200 case can host mini-ITX or micro-ATX motherboards, up to two optical drives, four SSDs, and three hard drives. The case comes with two Cooler Master XtraFlow fans, but it can also fit a thin 240mm radiator in the front of the case if you remove the SSD drive bays. A 120mm rear fan rounds out the cooling options. It supports CPU HSFs up to 160mm tall.

Cooler Master N200 Mini-ITX and Micro ATX case.jpg

The N400 is a bit larger at 190 x 426 x 501.4mm. The mid-tower case can support full ATX motherboards, 320mm long GPUs, and up to eight 120mm fans. A maximum of eight hard drives and seven expansion cards are also supported. Cooler Master provides two XtraFlow fans with the case.

Cooler Master N600 Case.jpg

Cooler Master’s N600 rounds out the new case series. The case measures 207 x 455 x 520mm and is constructed of a plastic polymer. In addition to the included XtraFlow fans, the case can accommodate up to 8 more 120mm fans. It has a removable hard drive cage that allows gamers to use graphics cards up to 430mm GPUs. A 240mm water cooling radiator can be installed in the top of the case as well. The N600 has a large mesh front panel that allows for front intake fans.

According to TechPowerUp, the Cooler Master N200 will be available in Europe later this month for 33 Euros while the larger N400 and N600 cases will be available in June for 42 Euros and 67.5 Euros respectively. Those prices work out to about $43 for the N200, $55 for the N400, and $89 for the N600, though that could change a bit as there is no word on official US pricing yet. Personally, I'm not a fan of the aesthetics, but at least the prices aren't terrible.

Source: TechPowerUp