Introduction and Features
There has been growing interest in recent years in quiet computing with more users looking for components that will help them build a quiet PC. Thermaltake’s new Suppressor F31 Silent ATX mid-tower chassis is aimed squarely at this audience. Thermaltake has been around since 1999 and is a well-respected name in the PC industry. They offer a full line of cases, power supplies, cooling components, and accessories.
The Suppressor F31 chassis is available with or without a side window and comes in black. Thermaltake also offers several other variations in the Suppressor line, which include the Suppressor F31 Power Cover Edition (large baffle located over the PSU area) and the Suppressor F51 Mid-Tower case (slightly larger chassis capable of mounting an Extended-ATX form factor motherboard). We will be taking a detailed look at the Suppressor F31 Window ATX Mid-Tower Chassis in this review.
The Thermaltake Suppressor F31 is wider than most mid-tower enclosures (250mm/9.8”) and incorporates sound dampening panels on the front, top and both sides. Note: the Window version replaces the left side panel sound dampening material with a large acrylic window. The top panel has three separate sound dampening panels that can easily be removed to make room for additional case fans or a top mounted liquid cooling radiator. The Suppressor F31 comes with two quiet case fans installed: one 120mm intake on the front and one 120mm exhaust on the back.
The roomy chassis offers numerous options for adding more case fans (up to nine total) for increased airflow as well as several options for installing liquid cooling systems of various sizes (single, dual, and/or triple fan/radiators). All of the potential fan locations are designed to mount either 120mm or 140mm fans. The front panel can mount one 200mm fan and the top panel can mount two 200mm fans if desired.
(Courtesy of Thermaltake)
Suppressor F31 Window ATX Mid-Tower Case Key Features:
• Mid-Tower ATX enclosure (HxWxD, 497x250x515mm, 19.5x9.8x20.3”)
• Large clear acrylic side window (also available without a side window)
• Supports ATX, Micro-ATX and Mini-ITX motherboards (F51 supports E-ATX)
• Extremely quiet case for noise sensitive applications
• Sound dampening panels on front, side, and top
• Easily removed dust filters on front, top and bottom panels
• Two included Thermaltake fans (120mm intake and 120mm exhaust)
• Numerous cooling options for adding fans and/or liquid cooling
• (2) USB 3.0, (2) USB 2.0 and HD audio jacks on the top I/O panel
• Three internal 3.5” hard drive / 2.5” SSD trays
• Three optional 3.5”/2.5” drive mounting locations behind mobo tray
• Two external 5.25” drive bays
• Tool-free mounting for all 3.5” internal and 5.25” external drives
• Up to 278mm (10.9”) clearance for graphic cards
• Up to 420mm (16.5”) for long graphic cards (with HDD cage removed)
• Up to 180mm (7.1”) of space for tall CPU coolers
• Price: $99.99 USD
Subject: Cases and Cooling | November 23, 2015 - 03:04 PM | Sebastian Peak
Tagged: pandora atx, Mid-Tower Case, enclosure, case, bitfenix pandora, bitfenix, atx case
BitFenix has released a larger follow up to the Pandora enclosure, previously a slim Micro-ATX tower. The new full ATX sized Pandora offers the same styling and optional customizable screen as the previous version, and now offers support for up to 360 mm radiators.
“The Pandora ATX offers the same much-loved unique styling as the original Pandora - but with housing capabilities for full-sized hardware and a 360mm radiator, either in the top or the front. Conceived as a versatile base for DIY projects, it is designed to show off your hardware in a tasteful manner through its large side window. The front panel is like no other, with the wrap-around side panels covering parts of it, leaving only a sober glossy black front panel housing the programmable 2.8" ICON color display visible through it. The ICON is a story in itself, allowing you to add any logo or picture you wish, for maximum personalization.”
I was impressed with the original Pandora when I reviewed it at the end of last year, but there were certainly concessions to size (beginning with the restriction to mATX or mITX motherboards) including limited cooler and taller GPU support. This was in fact a very narrow tower previously. With the new Pandora ATX you can have the same style including an optional LCD with ICON software that allows drag-and-drop customization with your own image. And while some might think ICON is a gimmick, and it arguably is, this is still a solid-looking enclosure.
So what exactly does this new Pandora ATX support? Here’s a rundown of the specs:
- 2.8" BitFenix ICON Display
- One-piece PSU cover and MB tray
- Top, Front and Bottom Dust Filters
- 360mm Radiator Support
- 20mm Cable Clearance
- Graphics Card Length up to 440mm
- Materials: Steel, ABS
- Colors (Interior/Exterior): Black/Black
- Supported Motherboards: ATX, Micro ATX, Mini-ITX
- LCD: 2.8" TFT, 240 x 320 (Pandora ATX only)
- I/O: 2x USB 3.0, 2x USB 2.0, 2x 3.5mm Audio (Line Out, Mic-in)
- 3.5” Drive Bays: x4, x3 (Pandora ATX Core)
- 2.5” Drive Bays: x4, 2x (Pandora ATX Core)
- Front Cooling: 1x 140mm (Included, Pandora ATX only), Max 3x 120mm OR 2x 140mm (Not Included)
- Rear Cooling: 1x 120mm FDB Fan (Included)
- Top Cooling: Max 3x 120mm OR 2x 140mm (Not Included)
- Expansion Slots: x7
- Power Supply: ATX & EPS, up to 220mm length
- Dimensions (WxHxD): 203 x 510 x 558 mm
- Weight: 9.92 kg (net), 11.4 kg (gross)
It seems that the only thing we don’t know about this new enclosure is pricing and availability, which have not yet been released.
Subject: Cases and Cooling | April 1, 2014 - 07:41 PM | Jeremy Hellstrom
Tagged: water-cooling, nzxt, Mid-Tower Case, h440, fn v2
Lee had great things to say about the NZXT H440 when he reviewed this mid-sized white beast and for those seeking a second opinion, [H]ard|OCP is ready to provide. They received the same model of case, which we are not allowed to call Stormtrooper White, testing the feasibility and performance of both single and dual 120 and 140mm self contained watercoolers. The review will give you a good idea what you can expect to fit within this case, ensuring you don't end up purchasing a combination of components which simply will not fit inside the case.
"The NZXT H440 Mid Tower Case is a steel enclosure that is solidly built and not priced incredibly high. Its designers have focused on a very clean look inside and out without forgetting about all the actual needs and wants enthusiasts have when it comes to a new chassis. NZXT do not short you on quality fans to make sure you keep your cool either."
Here are some more Cases & Cooling reviews from around the web:
- Corsair Graphite 760T Full Tower Case Review @ Legit Reviews
- Corsair Graphite 760T @ techPowerUp
- Corsair Graphite Series 760T Full Tower Computer Case Review @ Madshrimps
- Corsair Graphite Series 760T Review @ Hardware Canucks
- Corsair Graphite Series 730T & 760T @ eTeknix
- Corsair's Obsidian Series 450D @ The Tech Report
- Corsair Obsidian 450D Review @ Hardware Canucks
- Cougar MX300 Mid-Tower Case Review @HiTech Legion
- Anidees AI-4 M-ATX Silenced Chassis @ eTeknix
- SilverStone Raven RVZ01: One Of The Best Mini-ITX Cases For Building A Linux/SteamOS PC @ Phoronix
- Aerocool GT-S White @ eTeknix
- AZZA CSAZ-XT1 @ Benchmark Reviews
- Aerocool DS Cube Computer Case Review @ Madshrimps
- Antec GX500 @ Kitguru
- SilverStone Grandia GD08 HTPC Case Review @ OCIA
- ractal Design ARC Mini R2 Chassis @ Funky Kit
- SilentiumPC Fera 2 HE 1224 CPU Cooler @ NikKTech
- Corsair Hydro H75 & H105 Review @ Hardware Canucks
- Corsair H105 Extreme Performance Liquid CPU Cooler Review @ Legit Reviews
- Cooler Master Nepton 280L CPU Cooler Review @ Hardware Canucks
- Corsair H105 Hydro Series All-In-One 240mm Water Cooler @ eTeknix
Introduction and Features
The highly anticipated 450D mid-tower case is Corsair’s latest addition to their top of the line Obsidian Series and is the first new Obsidian case to be released in 2014. The Obsidian 450D mid-tower enclosure is positioned between Corsair’s 750D full-tower and 350D Micro-ATX enclosures and shares many of the same styling and design concepts of the 350D, 750D and 900D. The 450D is being introduced with an MSRP of $119.99 USD, which makes it considerably less expensive than Corsair’s classic Obsidian 650D mid-tower enclosure ($199.99 USD). It appears the new 450D may eventually become the successor to the 650D but we hope the 650D mid-tower case doesn’t go away any time soon as the two enclosures are still different enough to appeal to different users.
(Courtesy of Corsair)
And in addition to PC enclosures, Corsair continues to offer one of the largest selections of memory products, SSDs, power supplies, coolers, gaming peripherals, and PC accessories currently on the market today!
Here is what Corsair has to say about the Obsidian 450D PC case:
“The 450D Performance Mid-Tower PC case matches the iconic, brushed aluminum design of the Obsidian series with an increased focus on high-airflow, ensuring your system not only looks great, but runs cool.
Behind the 450D’s aluminum mesh intake grill are dual AF140L intake fans to direct airflow straight to a PC’s hottest component, the graphics card. The rear AF120L 120mm fan keeps the airflow moving smoothly and five other optional fan locations give you serious cooling flexibility. The 450D’s fan mounts also accommodate a wide range of water-cooling radiators, with room for up to a 360mm radiator in the roof, a 280mm radiator in the front, and a 240mm radiator in the floor.
The 450D also boasts all of the features that make the Obsidian Series a favorite among enthusiasts around the world. Easily accessible dust filters on the roof, front, and bottom ensure your system will stay looking its best, while modular tool-free 3.5”/2.5” hard disk mounts offer a wide range of storage options, or can be removed entirely to prioritize airflow.”
(Courtesy of Corsair)
Obsidian Series 450D Mid-Tower PC Case Key Points:
• Mid-tower PC case with clean, elegant styling
• Tool-free 2.5”, 3.5” and 5.25” drive installation
• Two AF140L intake fans and one AF120L exhaust fan
• Excellent airflow and low noise levels
• Support for water-cooling in a broad variety of configurations
• Support for 240mm, 280mm, and/or 360mm radiators
• Two dedicated 2.5” SSD drive sleds located behind motherboard
• Included modular (removable) drive cage supports three 2.5”/3.5” drives
• Optional drive cage adds support for three more 2.5”/3.5” drives
• Removable magnetic top filter provides a cleaner look
• Competitive price point
Introduction and Features
NZXT is introducing the H440 Mid-Tower case in their H Series line. The new H440 chassis will be available in two different color schemes; white with black accents and black with red accents. Both versions exhibit clean lines and a sleek design. Gone are the 5.25” optical drive bays and in their place you get three 120mm intake fans. In addition to providing excellent case cooling with four included fans the H440 is also very water-cooling friendly with support for water-cooling radiators on the top, front and rear of the case. The left side panel features a large acrylic window to showcase the motherboard area and the H440 can support up to eight internal 3.5”/2.5” HDDs/SSDs: 6+2.
NZXT H440 Mid-Tower Chassis
The lower section of the H440 case, which houses the power supply, is shrouded from view and provides a lot of room for cable management. The color accented shroud features a lighted NZXT logo and there are two LEDs built into the back panel to provide light when making connections; very nice.
The NZXT H440 Mid-Tower case comes with four NZXT FN V2 fans preinstalled: (3) 120mm intake fans in the front and (1) 140mm exhaust fan on the back. Dust filters are provided for the three front intake fans and also on the bottom of the case for the PSU intake fan. And up to three more 120mm fans (or two 140mm fans) can be added to the top panel if desired.
Here is what NZXT has to say about the H440 Mid-Tower case:
“The new H440 features a doorless, ODD-free front panel made entirely of steel while a large, full-view window reveals an interior specially engineered to make any build seamless and beautiful. The H440 ensures a hassle-free experience, allowing anybody to become an expert on clean cable management. The H440 comes standard with four of NZXT’s newly designed FN V2 case fans. An unheard of 3 x 120mm in front and 1 x 140mm in rear. And newly designed steel HDD drive trays can support up to eight internal 3.5”/2.5” HDDs/SSDs: 6+2. The H440 supports both 140mm and 120mm fans, the steel top and front panels come Kraken ready, fitting radiators up to 360mm in size to offer comprehensive water-cooling performance in a sleek, minimalist package.”
NZXT H440 Mid-Tower Case Key Features:
• Mid-tower PC case with sleek, clean styling
• Available in matte black with red accents or gloss white with black accents
• Four NZXT FN V2 case fans preinstalled
• Two removable dust filters (front intake and under PSU intake)
• Large side window
• Lighted NZXT logo on side and two LED lights on back panel
• Support for up to eight internal HDDs/SSDs
• Support for water-cooling radiators: front, top, and/or back
• Can mount radiators up to 360mm in length
• Cable routing cutouts with rubber grommets
• Large CPU backplate cut out for easy CPU cooler upgrades
• Top panel has 2 USB 3.0, 2 USB 2.0 and audio in/out ports
• Thumbscrew side panel removal for quick access
• Supports ATX, Micro-ATX, and Mini-ITX motherboards
• 2-Year warranty
Introduction and Features
The latest addition to Thermaltake's Soprano Series of enclosures is the New Soprano VO900. It’s a full-featured mid-tower case that is specifically designed for quiet operation. The New Soprano uses sound-dampening foam on both side panels, a brushed aluminum door to close off all the exposed front drive bays, and comes with two quiet fans to keep the noise down and still provide good case cooling.
The New Soprano VO900is finished in classic black inside and out and comes with a front I/O panel that incorporates USB 3.0 ports and a top mounted HDD hot-swap Docking Station that supports both 2.5" and 3.5" HDDs.
Thermaltake Soprano VO900 Mid-Tower Case Key Features:
• Elegant streamlined design with black finish inside and out
• Brushed aluminum front door panel
• Sound-dampening foam on both side panels for quiet operation
• (1) 200mm Blue LED fan on front intake (600~800 rpm)
• (1) 120mm rear exhaust fan (1000 rpm)
• Removable front and bottom mounted dust filters
• Supports both ATX and Micro-ATX motherboards
• Two USB 3.0 ports on front I/O panel
• (4) 5.25" and (1) 3.5" exposed drive bays (behind front door)
• (5) 3.5"/2.5" internal HDD bays (with four removable trays)
• Top-mounted HDD hot-swap Docking Station (2.5" & 3.5")
• Innovative tool-free 5.25" and 3.5" drive bay mounting
• Cable-Clear cable management
• Support for liquid cooling systems
• Audiophile-style foot pads
Introduction and Features
Earlier this year Corsair added the Vengeance series to their enclosure lineup and in this review we will be taking a detailed look at the Vengeance C70 mid-tower gaming case. Corsair continues to bring a full line of high quality cases, memory components, power supplies, cooling components, SSDs and accessories to market for the PC enthusiast and professional alike. The new Vengeance cases come in three different colors: Gunmetal Black, Military Green, and Arctic White. Corsair designed the Vengeance cases for travelling gamers. They feature rugged steel construction with numerous case cooling options for going on the road to the next LAN party.
Here is what Corsair has to say about the Vengeance C70 Cases:
When it’s time to take your competitive gaming on the road, the Vengeance C70 mid-tower PC case is a great choice. It’s crafted out of solid steel and made to survive trips with less wear and tear, and the ergonomic carry handles help you move your gear with confidence.
High-performance gaming hardware requires high-performance cooling. Vengeance C70 is equipped with three 120mm fans out of the box, with mounting points for seven more to meet your exact air cooling demands.
…and Water Cover, too
Vengeance C70 is also outfitted for liquid cooling upgradability. You get 240mm radiator compatibility on top of the case, and if that’s not enough, you can remove the lower hard drive cage to fit a second 240mm radiator for a dual-loop setup.
A case is as much a part of your armory as any other component. With internal USB 3.0 connectors for modern motherboards, native SSD compatibility, eight expansion slots and room for long graphics cards, the C70 stands ready to take on any challenger.
Lock and Load
Easy access side panels come off with quick-release latches. The optical drive bays and 3.5” hard drive bays are tool-free. Thumbscrews secure your graphics cards, and the hard drive cages can be easily removed for better airflow or additional expansion room. Cable routing tie-downs and built-in clamps keep your system tidy.
With so many features, the Vengeance C70 does what it’s supposed to do – stay out of your way while you build or upgrade.
Introduction and Features
Cooler Master is a well know name among PC enthusiasts and they are currently celebrating their 20th anniversary! In addition to a full line of PC enclosures, Cooler Master offers power supplies, coolers, and numerous accessories for mobile computing, notebooks, servers, and gaming. In this review we will be taking a detailed look at the new Cooler Master HAF XM enclosure, which is a very interesting mid-tower version of their popular HAF X series full-tower enclosure.
Here is what Cooler Master has to say about the new HAF XM enclosure: “The pure essence of the HAF X packed into a mid-tower size. The HAF XM supports up to four huge 200mm fans (Top x 2, Front, and Side), a large 140mm rear exhaust fan, and ample space for even the most demanding system builds. Liquid cooling support, an easy-access 90 degree rotated latched side panel, front HDD and SSD X-Docks, USB 3.0, and support for a hidden 2.5” HDD/SSD behind the motherboard tray make the HAF XM the ultimate setup for those that want enthusiast-grade features in a mid-tower package.”