Subject: Storage | April 4, 2014 - 02:05 AM | Tim Verry
Tagged: plextor, PCIe SSD, pci-e ssd, M6e, M.2
Update: Plextor has provided MSRP pricing for all three drives (see table below). Further, the company expects Newegg prices to be at or possibly slightly below MSRP. The new pricing information certainly makes the drives more attractive than previous estimates.
Plextor showed off its M6e PCI-E SSD at CES earlier this year, and the drives will soon be available for purchase in the US. The M6e is a M.2 form factor SSD that uses a Marvell 88SS9183 controller and Toshiba Toggle NAND MLC flash to offer up to 512GB of speedy (and bootable!) storage.
The Plextor M6e drive comes as a bare M.2 drive or as a version paired with a M.2-to-PCI-E adapter card for desktop PCs without the newer M.2 connector on the motherboard itself. In either case, the M6e utilizes two PCI-E 2.0 lanes and avoids the SATA III 6Gbps storage bottleneck altogether. The drive has its own BIOS implementation and should not require users to install separate drivers. The SSD supports both legacy and UEFI BIOSes along with standard storage technology such as AHCI, NCQ, encryption (AES-256), TRIM, SMART, et al.
The drives come in 128GB, 256GB, and 512GB capacities. The M6e SSDs are rated with a 2,400,000 hour MTBF and come with a 5 year warranty. Both the 256GB and 512GB drives reportedly offer up 770 MB/s sequential reads, 105,000 4K random read IOPS, and 100,000 4K random write IOPS. The 512GB M6e SSD has the highest sequential write speeds at up to 625 MB/s with the 256GB model topping out at 580 MB/s. The 128GB version is a bit slower in sequential writes and random read/write IOPS due to fewer NAND chips and channels, but still manages to offer up to 770 MB/s reads, 335 MB/s writes, 96,000 4K random read IOPS, and 83,000 4K random write IOPS.
The table below lays out the speeds and estimated pricing of the drives at the available capacities according to Plextor. Fortunately, Tek Syndicate found that at least the 256GB drive performs very close to its rated speeds in their video review.
|Plextor M6e Capacities||128GB||256GB||512GB|
|DRAM||256MB DDR3||512MB DDR3||1GB DDR3|
|Sequential Read*||770 MB/s||770 MB/s||770 MB/s|
|Sequential Write*||335 MB/s||580 MB/s||625 MB/s|
|Random Read IOPS*||96,000||105,000||105,000|
|Random Write IOPS*||83,000||100,000||100,000|
*All listed speeds are "up to n MB/s."
The drives will be available later this month at as-yet-unreleased MSRPs. The drives will initially be a Newegg exclusive in the US from April 7th to April 13th, after which it should make its way to other retailers. Note that the USD prices in the above chart are estimates based on pricing information scattered around the internet for the M6e drives. I have reached out to Plextor for comment and will update with official MSRP information as soon as possible.
Subject: Storage, Shows and Expos | January 8, 2014 - 11:02 PM | Allyn Malventano
Tagged: plextor, PCIe SSD, M6e, CES 2014, CES
This morning Plextor launched their new M6e PCIe SSD. Their press blast appears after the break, but before you do so, check out the pics we grabbed earlier today:
The M6e is essentially an interposer board that simply interfaces the Marvell controller / Toshiba flash M.2 PCIe SSD to a standard desktop class PCIe connector. This solution is slower than the upcoming SF3700 solution being implemented by Kingston and ADATA, but this product is shipping now, while the SF3700 will not be production ready for at least another six months time.
Full press blast appears below:
Follow all of our coverage of the show at http://pcper.com/ces!