Subject: General Tech, Storage | June 17, 2014 - 01:38 AM | Scott Michaud
Tagged: ssd, Samsung 840, Samsung, kingston hyper x, kingston, endurance, corsair neutron gtx, corsair
In The Tech Report's ongoing SSD endurance challenge, three SSDs are soldiering forward. We have reached the thousand-terabyte mark, which is at least five times more than any of the survivors are rated for. These survivors: The Corsair Neutron GTX, the Samsung 840 Pro, and the Kingston HyperX 3K. Technically, the HyperX was able to reach 1PB of written data with performing only 716TB of actual writes, due to compression.
Image Credit: The Tech Report
Of course, each of the drives are less-than prestine. The Corsair Neutron GTX 240GB was slowly decreasing in its "life" attribute since the beginning, claiming to be somewhere between 75% and 80% with a fairly linear decline. If this trend continues, the drive will reach "zero" at around 4-5PB of writes. That said, its read speed has substantially dropped from the time between 900TB and 1000TB of total writes, from 500MB/s to just under 400MB/s. Also, this "life" could drop substantially if the drive encounters reallocated sectors (which this model has apparently yet to do).
The other two drives are a similar, remarkably successful story.
The Kingston HyperX drive is reporting itself to be substantially worse off, within the last 10% of its life. That said, even though it claims to be pining for the fjords, it is still working and has only reported a couple of reallocated sectors, those occurring in the last 100TB of writes.
The Samsung 840 Pro seems to still be going strong, although it had more zero or "a couple" of reallocated sectors -- every hundred terabytes yields about 500 reallocations.
As always, this is just our brief discussion of what The Tech Report found out. Be sure to check out their full article for many more benchmarks, tests, and conclusions.
Subject: General Tech, Memory, Storage | June 9, 2014 - 11:08 PM | Scott Michaud
Tagged: kingston, ssd, hyperx
Kingston, known primarily for RAM, flash drives, and SSDs, discussed the health of their company. VR-Zone reported on the interview and highlighted the company's sentiments about the PC industry. Long story short, Kingston sees growth in sales of PC gaming hardware -- apparently 20% year-over-year. The company expects that this growth comes primarily from SSD upgrades, either from rotating media or, they claim, replacing years-old, entry-level SSDs with more modern (probably in both speed and size) options.
Nathan Su, APAC (Asia-Pacific) director of Kingston, believes that "many users" have experienced low-tier SSDs and, it seems, would be willing to invest in the full thing. He does not clarify what he means, whether he is talking about SSD caching, or just a really small (or slow) SSDs from drive generations past.
There is a bit of a concern that SSD prices will continue to fall, with some drives reaching under 40c/GB in recent sales. As a consumer, I (selfishly) hope that prices continue to drop, while still remaining profitably sustainable for the manufacturers. Hopefully Kingston is accounting for this and will continue to see growth at the same time.
Subject: Storage | April 22, 2014 - 02:24 PM | Jeremy Hellstrom
Tagged: kingston, msata, ssdnow, SandForce SF-2241, SandForce SF-2281, ssd
Fountain Valley, CA – April 21, 2014 – Kingston Digital, Inc., the Flash memory affiliate of Kingston Technology Company, Inc., the independent world leader in memory products, today announced the addition of 240GB and 480GB capacities to the existing SSDNow mS200 mSATA SSD line. Kingston’s SSDNow mS200 mSATA solid-state drive allows system builders and enthusiasts a cost-effective performance boost with quicker boot time and application loads while requiring less power than HDDs.
The mS200’s small-form factor is perfect for notebook, tablet and Ultrabook PCs, as well as a variety of embedded systems. It can also be used as a caching device with motherboards that support Intel Smart Response Technology (SRT) to improve system performance. mS200 has read speeds up to 550MB/s and write speeds up to 520MB/s.
The 30GB, 60GB, 120GB, 240GB and 480GB mS200 mSATA SSDs have a caseless, PCB-only design with no moving parts and are backed by a two- or three-year warranty, free technical support and legendary Kingston reliability. For more information visit www.kingston.com.
Features & Specifications:
- LSI SandForce 2241 (30GB, 60GB, 120GB) and 2281 (240GB, 480GB) controller with SATA Rev. 3.0 (6Gb/s) interface: twice as fast as the previous generation, yet more cost-efficient
- mSATA interface: fully compliant with industry standard, easy to fit, guaranteed to work
- NAND Flash memory based: shock-resistant with low power consumption
- Supports Intel’s SRT: combines capacity advantage of HDD with performance improvements of SSD in dual-storage configuration
- Supports S.M.A.R.T.: monitors the status of your drive
- Supports TRIM: maintains maximum performance on compatible operating systems
- Interface: SATA Rev. 3.0 (6Gb/s), SATA Rev. 2.0 (3Gb/s), SATA Rev. 1.0 (1.5Gb/s) ·
- Capacities1: 30GB, 60GB, 120GB, 240GB, 480GB
- Automatic Encryption (AES 128-bit):Password at the drive level ensures secure data protection
- Sequential Read/Write2:
- 30GB – 550 MB/s / 510MB/s
- 60GB – 550 MB/s / 520MB/s
- 120GB – 550MB/s / 520MB/s
- 240GB – 540MB/s / 530MB/s
- 480GB – 530MB/s / 340MB/s ·
- Maximum 4k Read/Write2:
- 30GB – up to 86,000/ up to 77,000 IOPS
- 60GB – up to 86,000/ up to 79,000 IOPS
- 120GB – up to 86,000/ up to 48,000 IOPS
- 240GB – up to 72,000/up to 40,000 IOPS
- 480GB – up to 72,000/up to 18,000 IOPS ·
- Random 4k Read/Write2:
- 30GB – up to 7,500/71,000 IOPS
- 60GB – up to 14,000/77,000 IOPS
- 120GB – up to 17,000/45,000 IOPS
- 240GB – up to 21,000/41,000 IOPS
- 480GB – up to 21,000/13,000 IOPS
- PCMARK® Vantage HDD Suite Score: 60,000
- Power Consumption: 0.4W Idle / 1.2 (TYP) Read / 1.8W (TYP) Write
- Storage temperature: -40°C ~ 85°C
- Operating temperature: 0°C ~ 70°C
- Dimensions: 50.88mm x 30mm
- Weight: 6.86g
- TRIM Supported
- Vibration operating: 2.17G
- Vibration non-operating: 20G
- MTTF: 1,000,000 Hrs
- 30GB – two-year warranty with free technical support
- 60GB, 120GB, 240GB, 480GB – three-year warranty with free technical support
- Total Bytes Written (TBW)3:
- 30GB: 121TB 3 DWPD4
- 60GB: 218TB 3 DWPD4
- 120GB: 337TBW 2 DWPD4
- 240GB: 585TBW 2 DWPD4
- 480GB: 1562TBW 2 DWPD4
1 Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston's Flash Memory Guide.
2 Based on “out-of-box performance.” Speed may vary due to host hardware, software and usage.
3 Total Bytes Written (TBW) is derived from the JEDEC Workload (JESD219A).
4 Drive Writes Per Day (DWPD)
Ultra-Speed RAM, APU-Style
In our review of the Kingston HyperX Predator 2666MHz kit, we discovered what those knowledgeable about Intel memory scaling already knew: for most applications, and specifically games, there is no significant advantage to increases in memory speed past the current 1600MHz DDR3 standard. But this was only half of the story. What about memory scaling with an AMD processor, and specifically an APU? To find out, we put AMD’s top APU, the A10-7850K, to the test!
Ready for some APU memory testing!
AMD has created a compelling option with their APU lineup, and the inclusion of powerful integrated graphics allows for interesting build options with lower power and space requirements, and even make building tiny mini-ITX systems for gaming realistic. It’s this graphical prowess compared to any other onboard solution that creates an interesting value proposition for any gamer looking at a new low-cost build. The newest Kaveri APU’s are getting a lot of attention and they beg the question, is a discrete graphics card really needed for gaming at reasonable settings?
Subject: Memory | April 9, 2014 - 06:54 PM | Jeremy Hellstrom
Tagged: kingston, kingston hyper x, Genesis LoVo, 16GB, ddr3-1600
If you were impressed by the low wattage required to run the AMD AM1 Athlon 5350 and are thinking of building a low power system along the lines of the one Josh used in his review Kingston has a product to help you lower that total system voltage a little more. HyperX Genesis LoVo uses only a mere 1.35V to power the 16GB DDR3-1600 CL9 kit and their low profile helps if you are building a small sized system. Performance at stock speeds is quite decent, with the possibility of overclocking to add more speed if you desire but these DIMMs are more about power savings than raw power. Check out the full review at Funky Kit.
"Even though higher clocked RAM is great for overclocking and gaming for most computer users, memory at lower clocks is good enough for the general tasks they perform daily. For those users, memory speed is usually less important than capacity so today we wish to present something more regular in the memory's world what is Kingston HyperX Genesis LoVo 16GB DDR3-1600 CL9. As probably some readers already noticed, we can't really call it regular memory as Kingston specified it to run at low voltage of 1.35V ... and it's green like most eco-friendly products."
Here are some more Memory articles from around the web:
- G.Skill TridentX 32 GB CAS7 F3-1600C7Q-32GTX @ techPowerUp
- Corsair Vengeance Low Profile 16GB 1600MHz C10 Dual Channel DDR3 Memory Kit Review @ Madshrimps
- AVEXIR Blitz 1.1 Memory Series @ Funky Kit
- Avexir Blitz Series 1.1 4GB 1600MHz Memory @ eTeknix
- Funky Kit Review: G.Skill TridentX 16GB DDR3-1866 CL8 @ Funky Kit
- Avexir Core Series MPOWER 2133 MHz CL9 @ Hardwareoverclock
- Kingston HyperX Predator 8GB DDR3-2400 Kit Review @ OCIA
- Team Group Vulcan Gold 2400MHz 8GB Memory Kit @ Kitguru
- Kingston HyperX Predator 8GB DDR3-2800 CL12 @ Funky Kit
So Many MHz, So Little Time...
If you've looked at memory for your system lately you've likely noticed a couple of things. First, memory prices have held steady for the past few months, but are still nearly double what they were a little over a year ago. Second, now that DDR3 has been a mature standard for years, there is a vast selection of RAM from many vendors, all with nearly identical specs. The standard has settled at 1600MHz for DDR3, and most desktop memory is programmed for this speed. Granted, many modules run at overclocked speeds, and there are some out there with pretty outlandish numbers, too - and it’s one of those kits that we take a look at today.
Hardly subtle, the Kingston HyperX 'Predator' dual channel kit for review today is clocked at a ridiculous 1066MHz OVER the 1600MHz standard. That's right, this is 2666MHz memory! It seems like such a big jump would have to provide increased system performance across the board, and that's exactly what we're going to find out.
We all want to get the most out of any component, and finding the best option at a given price is part of planning any new build or upgrade. While every core part is sold at a particular speed, and most can be overclocked, there are still some qualifying factors that make selecting the fastest part for your budget a little more complicated. Speed isn't based on MHz alone – as with processors, where it often comes down to number of cores, how many instructions per clock cycle a given CPU can churn out, etc.
Subject: General Tech | January 9, 2014 - 02:28 AM | Ken Addison
Tagged: video, sandforce, podcast, plextor, pci-e ssd, origin, Marvell, kingston, evga, adata
CES 2014 Podcast Day 4 - 01/08/14
It's time for podcast fun at CES! Join us as we talk about the fourth day of the show including exciting announcements from EVGA, Origin, PCI-E SSDs from Kingston, Plextor, and ADATA and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Josh Walrath, Allyn Malventano and Ken Addison
Program length: 48:41
Subject: Storage, Shows and Expos | January 8, 2014 - 10:47 PM | Allyn Malventano
Tagged: SF3700, Predator, OTG, Need For Seat, kingston, CES 2014, CES
We swing by Kingston this morning to see what was cooking. Here we go:
OTG compatible dual micro / standard USB drive that's physically a tiny bit smaller than the Corsair model we saw yesterday.
This was probably the most comfortable headset I've ever put on. The padding is real leather wrapped over memory foam, and the arms are aluminum for durability. It really didn't feel like it was on at all, aside from the reduction in background noise from the room, assisted by the denser memory foam.
Here is a reference Intel chassis populated with a whopping 384GB of DDR4-2133.
This modules were populated with Hynix DDR4 modules.
...and this staggering speed and capacity was able to be run by the reference board in multi-channel mode. That's a serious amount of RAM running at a serious speed. Speaking of things running at serious speeds:
Here is the Kingston HyperX Predator, a PCIe SSD. The unreleased LSI SandForce SF3700 is capable of 1.8 GB/sec as it is a native PCIe implementation. The only catch is we will have to wait until mid-late 2014 for these to launch. Kingston is ready, but SandForce is not. Here is the 2.5" version of the same, demonstrating that the SF3700 is also capable of configuring for a SATA 6Gb/sec link:
We also saw some cool looking "Need For Seat" office / gaming chairs. They were fairly comfortable, and the backs pivot nearly flat, just like the seats in your car:
In addition to differing looks, each model has a different cushion layout, so I recommend trying to sit in the one you intend to buy prior to doing so.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Memory | October 3, 2013 - 05:31 PM | Jeremy Hellstrom
Tagged: kingston hyper x, kingston, HyperX Genesis 10th Anniversary Special Edition, DDR3-2400, 16GB
Kingston 10th Anniversary HyperX 16GB 2400MHz brings you a DOTA 2 tourney but does it also bring performance to your PC? This 4x4 kit runs DDR3-2133 @ 11-13-13-30 or DDR3-2400 @ 11-14-14-30 which implies very good performance from these DIMMs at stock speeds. Of course Overclockers Club were not satisfied with stock speeds and with a little tweaking managed to hit DDR3-2522 @ 12-13-13-33 which was enough to give them a boost in performance without causing instability. Another feature of these DIMMs many will like is the low profile of the heatspreaders which will allow a much broader choice of CPU heatsink.
”During my testing I found that while the kit ran flawlessly at its rated speed of 2400MHz, they just did not offer a whole lot of headroom above that, even when pushing 1.75v+ through them. Seeing how running a 125MHz or 166MHz strap is a bit easier on the memory controller, I swapped to the 125MHz divider and started upping the frequency up a little at a time until reaching the maximum clock speed on the HyperX modules. I left the memory sub timings alone and controlled by the board, adjusted the primary timings to 12-13-13-33, adjusted the DRAM voltage to 1.70v, started up again, and finally reached 1260.2MHz or just over 2520MHz for a 120MHz gain in clock speed. That represents about a 5% gain from just testing and tweaking. What I found was that the Kingston HyperX 10th Anniversary modules performed well even with the boosted clock speed. The low profile heat sink makes sure there are no restrictions to the CPU cooling solution used.”
Here are some more Memory articles from around the web:
- Patriot Viper 3 Series 8GB DDR3-2400 CL10 @ Funky Kit
- ADATA XPG V2 Series 2400MHz DDR3 Memory Kit Review @HiTech Legion
- Kingston HyperX Beast 16GB DDR3-2133 @ Benchmark Reviews
- Patriot Viper III 2400MHz “Black Mamba” @ Bjorn3D
- Mushkin Blackline 997123R 16GB Review @ OCC
- ADATA XPG V2 RAM DDR3-2400 8GB Memory Kit @ Benchmark Reviews
- Gskill F3-2666C11D-8GTXD 2666MHz Dual Channel @ Bjorn3D
- Kingston HyperX Predator 16GB DDR3-2133 Kit Review @ OCIA
- ADATA XPG V2 3100MHz 8GB @ Kitguru
- Corsair Vengeance Pro DDR3 1866MHz 16GB @ eTeknix
- Mushkin 996996 8GB DDR3 2133Mhz Review @ OCC
- Corsair Vengeance Pro DDR3 2666MHz 16GB Review @ OCC
Subject: General Tech, Shows and Expos | October 3, 2013 - 01:41 PM | Jeremy Hellstrom
Tagged: kingston hyper x, kingston, DOTA 2, competition
Fountain Valley, CA – October 3, 2013 − Kingston Technology Company Inc., the independent world leader in memory products, will soon begin two global competitions to further show its support and commitment to the eSports and the enthusiast community. The HyperX DotA 2 League features 16 of the world’s top professional DotA 2 gaming teams battling for a large cash prize. On October 7, HyperX will begin an open global overclocking competition. The finals for both competitions will be held during 2014 International CES® in Las Vegas, Nevada.
The HyperX DotA 2 League tournament begins later this month with 16 teams competing for a total of $50,000 (USD) in prize money. An additional $40,000 will be offered to cover flight and hotel for the top four teams that advance to battle each other in Las Vegas for the championship. Each match is a best-of-three maps and all matches will be broadcast live so fans can follow the progress of their favorite team. The format and complete competition details can be found here.
Working together with HWBOT, the premier informational website for overclockers and performance enthusiasts, contestants will compete to post the highest benchmarks for Maximum Memory Frequency, Super PI and Intel® XTU. Beginning October 7, there will be an open online qualifying competition lasting four weeks. Winners will be determined weekly with the five final contestants competing in January 2014 during CES. For the finals, components will be supplied by Kingston and its partners: ASUS, Cooler Master and Intel®. Complete rules can be found here.
“The HyperX 2013 DotA 2 tournament will be epic as the best professional gaming teams in the world battle each other and fans will be able to watch every minute live online,” said Annie Leung, HyperX global strategic marketing manager, Kingston. “We are also very excited to hold an overclocking competition globally to see how far HyperX memory can be pushed. Both events will be fun and exciting for gamers and enthusiasts.”
Please visit the Kingston HyperX Website for more information.
Kingston is celebrating 25 years in the memory industry. The company was founded on October 17, 1987, and has grown to become the largest third-party memory manufacturer in the world. The 25th anniversary video can be found here along with more information, including a timeline of Kingston's history. In addition, HyperX memory is celebrating its 10th anniversary. The first HyperX high-performance memory module was released in November 2002.