Subject: General Tech | April 28, 2016 - 06:48 PM | Jeremy Hellstrom
Tagged: audio, kingston hyper x, Cloud Revolver, gaming headset
50mm neodymium drivers have become standard issue on gaming headsets and the Kingston HyperX Cloud Revolver is no exception. With a frequency range of 12Hz–28,000 Hz and impedance of 30 Ω this headset should work well with just about any device. The steel and leather construction looks nice and will help these headphones resist being damaged while being stored for travel. As to how they sound, Modders Inc rather liked this analogue headset, read more about it here.
"The Kingston HyperX Cloud Revolver is the latest headset in Kingston's product family. Kingston's gaming headset line up has grown to four different models which feature both 3.5mm and USB connectivity."
Here is some more Tech News from around the web:
- HyperX Cloud Revolver Pro Gaming Headset @ eTeknix
- Tesoro Kuven A1 Pro Real 5.1 Surround Sound Gaming Headset Review @ NikKTech
- Creative SoundBlaster X Pro-Gaming H5 @ eTeknix
- first harmonic IEB6+MIC HiFi Headphones Review @ NikKTech
- Sennheiser HD800 S @ Kitguru
- Feniks Essence Speakers Review @ Hardware Canucks
Subject: Storage | January 10, 2016 - 07:15 PM | Tim Verry
Tagged: pci-e, NVMe, M.2, kingston hyper x, kingston
The 2016 Consumer Electronics Show is over, but news is still trickling out from attendees. Maximum PC spotted HyperX's first NVMe solid state drive on the show floor. First shown off at IDF 2015, the HyperX Predator NVMe M.2 SSD made an appearance at CES and the company released a bit more information.
Specifically, the new NVMe SSD will come with an optional PCI-E add-in-card for desktops without an M.2 slot much like its non-NVMe predecessor (AHCI protocol). It will come in 240 GB, 480 GB, and 960 GB capacities and will hit speeds up to 2,585 MB/s reads and 1,354 MB/s writes. Further, Overclockers.com observed a 480 GB model at CES benchmarking at 1,775 MB/s sequential reads and 1,675 MB/s sequential writes.
Beyond that, HyperX (which is the enthusiast division of Kingston Technologies) is not talking details just yet and we do not know which controller or NAND flash they are using. The previous generation Predator uses Toshiba A19 toggle NAND though which is promising.
The new NVMe drive will be available sometime in the second quarter of 2016. Pricing has not yet been announced. Stay tuned to PC Perspective for more details closer to launch. I'm looking forward to the full reviews and what moving to supporting NVMe will do for end users' experiences.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Storage | April 28, 2015 - 05:51 PM | Jeremy Hellstrom
Tagged: Phison PS3110, 19nm, toshiba, toggle NAND, kingston hyper x, ssd
When you pick up a Kingston HyperX Savage SSD you have a choice of the barebones model at $122 for the 240GB model or you can pay an extra $25 for the upgrade kit which contains 2.5mm z-height adapter, a SATA 6Gb/s cable, a 2.5" to 3.5" adapter plate, Acronis True Image HD imaging software, a micro-screwdriver set, and a USB 3.0 enclosure with USB 3.0 cable. That upgrade kit is perfect for those looking for an easy way to move their entire OS to the new SSD with a minimum of fuss. Inside the drive is the Phison PS3110 controller with a 256MB DDR3-1600 cache and Toshiba's 19nm Toggle Mode NAND. Hardware Canucks put the drive to the test and it shows huge improvements from the first generation, enough to put it in competition with offerings from OCZ, Intel and Crucial. This demonstrates a faster evolution that competitors products but it does unfortunately come at a price that is a bit high compared to those competitors offerings.
"The affordable Kingston HyperX Savage is one of the first SSDs to use the new Phison PS3110 controller and the end results are extremely impressive to say the least."
Here are some more Storage reviews from around the web:
- Kingston HyperX Savage 240GB SSD Upgrade Bundle Review @HiTech Legion
- Kingston HyperX Savage SSD @ The SSD Review
- Kingston HyperX Savage @ Benchmark Reviews
- Kingston HyperX Savage 240GB SSD Review, Raw Savage Speed @ Bjorn3d
- Kingston HyperX Savage SSD @ Modders-Inc
- Intel 750 Series @ HardwareHeaven
- Seagate Enterprise NAS HDD 6TB SATA III HDD Review @ NikKTech
Subject: Memory | February 7, 2015 - 01:40 AM | Tim Verry
Tagged: overclocking, kingston hyper x, kingston, ddr4, ces 20156, CES
Overclocker "Toppc" from MSI was able to crank a single stick of DDR4 memory to a world record 4,351 MHz at the International CES 2015 competition. Toppc paired the Kingston Predator DDR4 DIMM with an Intel Haswell-E Core i7-5960X processor and a MSI X99S Xpower AC motherboard. After disabling all but one CPU core and adding in copious amounts of liquid nitrogen, the 4GB memory module was overclocked to 4,351 MHz which was measured using CPU-Z (CPU-Z Validation) and verified with an oscilloscope (shown in the embedded video below).
This overclock is quite impressive even if it is not something you can run at home especially for DDR4 which is designed to use less power than DDR3. Out of the box the DIMMs are rated at up to 3,333 MHz which means they achieved an impressive 30.54% overclock (an increase of 1,018 MHz).
This kind of overclock will only result in marginal performance gains (at best) in everyday applications, but is still cool to see. Also, it surely won't hurt benchmark runs!
Subject: General Tech, Storage | September 22, 2014 - 12:41 AM | Scott Michaud
Tagged: ssd, Samsung, kingston hyper x, kingston, endurance, corsair neutron gtx, corsair, 840 pro
Many drives have died over the last year and a bit. The Tech Report has been torturing SSDs with writes until they drop. Before a full petabyte of data was written, three of the six drives kicked the bucket. They are now at 1500TB of total writes and one of the three survivors, the 240GB Corsair Neutron GTX, dropped out. This was a bit surprising as it was reporting fairly high health when it entered "the petabyte club" aside from a dip in read speeds.
The two remaining drives are the Samsung 840 Pro (256GB) and Kingston HyperX 3K (240GB).
Two stand, one fell (Image Credit: Tech Report)
Between those two, the Samsung 840 Pro is given the nod as the Kingston drive lived through uncorrectable errors; meanwhile, the Samsung has yet to report any true errors (only reallocations). Since the test considers a failure to be a whole drive failure, though, the lashings will persist until the final drive gives out (or until Scott Wasson gives up in a glorious sledgehammer apocalypse -- could you imagine if one of them lasted a decade? :3).
Of course, with just one unit from each model, it is difficult to faithfully compare brands with this marathon. While each lasted a ridiculously long time, the worst of the bunch putting up with a whole 2800 full-drive writes, it would not be fair to determine an average lifespan for a given model with one data point each. It is good to suggest that your SSD probably did not die from a defrag run -- but it is still a complete waste of your time and you should never do it.
Subject: General Tech, Storage | June 17, 2014 - 05:38 AM | Scott Michaud
Tagged: ssd, Samsung 840, Samsung, kingston hyper x, kingston, endurance, corsair neutron gtx, corsair
In The Tech Report's ongoing SSD endurance challenge, three SSDs are soldiering forward. We have reached the thousand-terabyte mark, which is at least five times more than any of the survivors are rated for. These survivors: The Corsair Neutron GTX, the Samsung 840 Pro, and the Kingston HyperX 3K. Technically, the HyperX was able to reach 1PB of written data with performing only 716TB of actual writes, due to compression.
Image Credit: The Tech Report
Of course, each of the drives are less-than prestine. The Corsair Neutron GTX 240GB was slowly decreasing in its "life" attribute since the beginning, claiming to be somewhere between 75% and 80% with a fairly linear decline. If this trend continues, the drive will reach "zero" at around 4-5PB of writes. That said, its read speed has substantially dropped from the time between 900TB and 1000TB of total writes, from 500MB/s to just under 400MB/s. Also, this "life" could drop substantially if the drive encounters reallocated sectors (which this model has apparently yet to do).
The other two drives are a similar, remarkably successful story.
The Kingston HyperX drive is reporting itself to be substantially worse off, within the last 10% of its life. That said, even though it claims to be pining for the fjords, it is still working and has only reported a couple of reallocated sectors, those occurring in the last 100TB of writes.
The Samsung 840 Pro seems to still be going strong, although it had more zero or "a couple" of reallocated sectors -- every hundred terabytes yields about 500 reallocations.
As always, this is just our brief discussion of what The Tech Report found out. Be sure to check out their full article for many more benchmarks, tests, and conclusions.
Subject: Memory | April 9, 2014 - 10:54 PM | Jeremy Hellstrom
Tagged: kingston, kingston hyper x, Genesis LoVo, 16GB, ddr3-1600
If you were impressed by the low wattage required to run the AMD AM1 Athlon 5350 and are thinking of building a low power system along the lines of the one Josh used in his review Kingston has a product to help you lower that total system voltage a little more. HyperX Genesis LoVo uses only a mere 1.35V to power the 16GB DDR3-1600 CL9 kit and their low profile helps if you are building a small sized system. Performance at stock speeds is quite decent, with the possibility of overclocking to add more speed if you desire but these DIMMs are more about power savings than raw power. Check out the full review at Funky Kit.
"Even though higher clocked RAM is great for overclocking and gaming for most computer users, memory at lower clocks is good enough for the general tasks they perform daily. For those users, memory speed is usually less important than capacity so today we wish to present something more regular in the memory's world what is Kingston HyperX Genesis LoVo 16GB DDR3-1600 CL9. As probably some readers already noticed, we can't really call it regular memory as Kingston specified it to run at low voltage of 1.35V ... and it's green like most eco-friendly products."
Here are some more Memory articles from around the web:
- G.Skill TridentX 32 GB CAS7 F3-1600C7Q-32GTX @ techPowerUp
- Corsair Vengeance Low Profile 16GB 1600MHz C10 Dual Channel DDR3 Memory Kit Review @ Madshrimps
- AVEXIR Blitz 1.1 Memory Series @ Funky Kit
- Avexir Blitz Series 1.1 4GB 1600MHz Memory @ eTeknix
- Funky Kit Review: G.Skill TridentX 16GB DDR3-1866 CL8 @ Funky Kit
- Avexir Core Series MPOWER 2133 MHz CL9 @ Hardwareoverclock
- Kingston HyperX Predator 8GB DDR3-2400 Kit Review @ OCIA
- Team Group Vulcan Gold 2400MHz 8GB Memory Kit @ Kitguru
- Kingston HyperX Predator 8GB DDR3-2800 CL12 @ Funky Kit
So Many MHz, So Little Time...
If you've looked at memory for your system lately you've likely noticed a couple of things. First, memory prices have held steady for the past few months, but are still nearly double what they were a little over a year ago. Second, now that DDR3 has been a mature standard for years, there is a vast selection of RAM from many vendors, all with nearly identical specs. The standard has settled at 1600MHz for DDR3, and most desktop memory is programmed for this speed. Granted, many modules run at overclocked speeds, and there are some out there with pretty outlandish numbers, too - and it’s one of those kits that we take a look at today.
Hardly subtle, the Kingston HyperX 'Predator' dual channel kit for review today is clocked at a ridiculous 1066MHz OVER the 1600MHz standard. That's right, this is 2666MHz memory! It seems like such a big jump would have to provide increased system performance across the board, and that's exactly what we're going to find out.
We all want to get the most out of any component, and finding the best option at a given price is part of planning any new build or upgrade. While every core part is sold at a particular speed, and most can be overclocked, there are still some qualifying factors that make selecting the fastest part for your budget a little more complicated. Speed isn't based on MHz alone – as with processors, where it often comes down to number of cores, how many instructions per clock cycle a given CPU can churn out, etc.
Subject: Memory | October 3, 2013 - 09:31 PM | Jeremy Hellstrom
Tagged: kingston hyper x, kingston, HyperX Genesis 10th Anniversary Special Edition, DDR3-2400, 16GB
Kingston 10th Anniversary HyperX 16GB 2400MHz brings you a DOTA 2 tourney but does it also bring performance to your PC? This 4x4 kit runs DDR3-2133 @ 11-13-13-30 or DDR3-2400 @ 11-14-14-30 which implies very good performance from these DIMMs at stock speeds. Of course Overclockers Club were not satisfied with stock speeds and with a little tweaking managed to hit DDR3-2522 @ 12-13-13-33 which was enough to give them a boost in performance without causing instability. Another feature of these DIMMs many will like is the low profile of the heatspreaders which will allow a much broader choice of CPU heatsink.
”During my testing I found that while the kit ran flawlessly at its rated speed of 2400MHz, they just did not offer a whole lot of headroom above that, even when pushing 1.75v+ through them. Seeing how running a 125MHz or 166MHz strap is a bit easier on the memory controller, I swapped to the 125MHz divider and started upping the frequency up a little at a time until reaching the maximum clock speed on the HyperX modules. I left the memory sub timings alone and controlled by the board, adjusted the primary timings to 12-13-13-33, adjusted the DRAM voltage to 1.70v, started up again, and finally reached 1260.2MHz or just over 2520MHz for a 120MHz gain in clock speed. That represents about a 5% gain from just testing and tweaking. What I found was that the Kingston HyperX 10th Anniversary modules performed well even with the boosted clock speed. The low profile heat sink makes sure there are no restrictions to the CPU cooling solution used.”
Here are some more Memory articles from around the web:
- Patriot Viper 3 Series 8GB DDR3-2400 CL10 @ Funky Kit
- ADATA XPG V2 Series 2400MHz DDR3 Memory Kit Review @HiTech Legion
- Kingston HyperX Beast 16GB DDR3-2133 @ Benchmark Reviews
- Patriot Viper III 2400MHz “Black Mamba” @ Bjorn3D
- Mushkin Blackline 997123R 16GB Review @ OCC
- ADATA XPG V2 RAM DDR3-2400 8GB Memory Kit @ Benchmark Reviews
- Gskill F3-2666C11D-8GTXD 2666MHz Dual Channel @ Bjorn3D
- Kingston HyperX Predator 16GB DDR3-2133 Kit Review @ OCIA
- ADATA XPG V2 3100MHz 8GB @ Kitguru
- Corsair Vengeance Pro DDR3 1866MHz 16GB @ eTeknix
- Mushkin 996996 8GB DDR3 2133Mhz Review @ OCC
- Corsair Vengeance Pro DDR3 2666MHz 16GB Review @ OCC
Subject: General Tech, Shows and Expos | October 3, 2013 - 05:41 PM | Jeremy Hellstrom
Tagged: kingston hyper x, kingston, DOTA 2, competition
Fountain Valley, CA – October 3, 2013 − Kingston Technology Company Inc., the independent world leader in memory products, will soon begin two global competitions to further show its support and commitment to the eSports and the enthusiast community. The HyperX DotA 2 League features 16 of the world’s top professional DotA 2 gaming teams battling for a large cash prize. On October 7, HyperX will begin an open global overclocking competition. The finals for both competitions will be held during 2014 International CES® in Las Vegas, Nevada.
The HyperX DotA 2 League tournament begins later this month with 16 teams competing for a total of $50,000 (USD) in prize money. An additional $40,000 will be offered to cover flight and hotel for the top four teams that advance to battle each other in Las Vegas for the championship. Each match is a best-of-three maps and all matches will be broadcast live so fans can follow the progress of their favorite team. The format and complete competition details can be found here.
Working together with HWBOT, the premier informational website for overclockers and performance enthusiasts, contestants will compete to post the highest benchmarks for Maximum Memory Frequency, Super PI and Intel® XTU. Beginning October 7, there will be an open online qualifying competition lasting four weeks. Winners will be determined weekly with the five final contestants competing in January 2014 during CES. For the finals, components will be supplied by Kingston and its partners: ASUS, Cooler Master and Intel®. Complete rules can be found here.
“The HyperX 2013 DotA 2 tournament will be epic as the best professional gaming teams in the world battle each other and fans will be able to watch every minute live online,” said Annie Leung, HyperX global strategic marketing manager, Kingston. “We are also very excited to hold an overclocking competition globally to see how far HyperX memory can be pushed. Both events will be fun and exciting for gamers and enthusiasts.”
Please visit the Kingston HyperX Website for more information.
Kingston is celebrating 25 years in the memory industry. The company was founded on October 17, 1987, and has grown to become the largest third-party memory manufacturer in the world. The 25th anniversary video can be found here along with more information, including a timeline of Kingston's history. In addition, HyperX memory is celebrating its 10th anniversary. The first HyperX high-performance memory module was released in November 2002.