Subject: General Tech, Motherboards | November 4, 2014 - 03:19 AM | Scott Michaud
Tagged: msi, X99, motherboard, motherboards, qualcomm, killer, 802.11ac
The MSI X99S GAMING 9 AC motherboard is built for the Haswell-E architecture, and Morry did a review of it just a couple of week ago. He liked it, giving it a gold award. Now MSI has released a new model, the X99S GAMING 9 ACK, which is basically identical except for its wireless adapter. While the original AC-variant had Intel 802.11ac with dual antennas, the ACK comes with Qualcomm Killer-branded 802.11ac.
Again, for the rest of the motherboard, I will refer you to Morry's review. The only real difference is the Killer NIC and Wireless-AC combo, which is actually more than it seems. If I understand it correctly, "Smart Teaming" will monitor the specific applications using the network and split them between LAN and WiFi, with the more latency-dependent programs getting the wired connection. In theory, this is interesting except that both streams would need to merge in order to get out the internet, which will be your bottleneck. On the other hand, if this works with multiple internet connections, then I could see a use case. For instance, someone has a solid DSL connection alongside their high-bandwidth Cable ISP.
Or, of course, that could not work at all and the outbound internet will, in fact, be your bottleneck.
Pricing and availability is also not available. You can find the original X99S GAMING 9, with the Intel wireless network controller, for about $405. An upgraded wireless adapter should not increase the cost much at all.
Subject: General Tech, Networking | August 1, 2013 - 09:43 PM | Scott Michaud
Tagged: qualcomm, killer, Intel, 802.11n
Another BigFoot sighting...
PCWorld compared an Intel Centrino Advanced-N 6230 to a Qualcomm Killer Wireless-N 1202 using two distinct benchmarks. The first of the tests, a ping and jitter assessment written by Qualcomm, claimed a significant win (2ms vs Intel's 4-8ms) for Killer between laptop and router. The second test measured bandwidth where Qualcomm matched or sometimes doubled Intel's performance except in close range 5GHz scenarios; Intel won, in those cases, by about a factor of two.
Of course, a difference of 2-to-6ms is low for online games. I would imagine those who are genuinely concerned about latency, especially during a LAN Party, would not settle for any form of wireless solution much less plan ahead for it. That could be just my perspective, however; I almost never consider Wi-Fi adapters because I will immediately hunt for an Ethernet jack.
That said, Qualcomm is apparently selling these adapters for prices very comparable to Intel. According to these benchmarks, grains of salt added to taste, Killer would not be a downgrade for a gaming device and should be considered if presented to you. The only time it clearly lost is high speed data transfers at 5GHz less than 10 feet away.
Seriously, Ethernet, keep one in your laptop bag. Magic.
If curious about a purchase, check out the benchmarks (or just skip 802.11n and look for 802.11ac or .11ad equipment); if curious for entertainment, check out Ryan's review of the original, wired, Killer NIC.
Subject: Networking | April 18, 2012 - 10:33 PM | Tim Verry
Tagged: wi-fi, qualcomm, networking, killer, Ethernet
Qualcomm Atheros today launched two new networking cards for the desktop and laptop markets. A subsidiary company of Qualcomm (formerly Killer Networks), the Wireless-N 1202 and E2200 provides Wi-Fi and Ethernet connectivity based on Killer Networks’ technology.
The Wireless-N 1202 is a 802.11n Wi-Fi and Bluetooth module with 2x2 MIMO antennas which should provide plenty of Wireless N range. On the wired side of things the E2200 is a Gigabit Ethernet network card for desktop computers. Both modules are powered by Killer Network’s chip and the Killer Network Manager software. The software will allow users to prioritize gaming, audio, and video packets over other network traffic to deliver the best performance. Director of Business Development Mike Cubbage had the following to say.
“These products create an unprecedented entertainment and real-time communications experience for the end user by ensuring that critical online applications get the bandwidth and priority they need, when they need it.”
The E2200 Gigabit Ethernet NIC is available for purchase now, and the Wireless-N 1202 module will go on sale in May. More specific information on the products will be available after the official launch date (today) so stay tuned to PC Perspective.