Our 4K Testing Methods
You may have recently seen a story and video on PC Perspective about a new TV that made its way into the office. Of particular interest is the fact that the SEIKI SE50UY04 50-in TV is a 4K television; it has a native resolution of 3840x2160. For those that are unfamiliar with the new upcoming TV and display standards, 3840x2160 is exactly four times the resolution of current 1080p TVs and displays. Oh, and this TV only cost us $1300.
In that short preview we validated that both NVIDIA and AMD current generation graphics cards support output to this TV at 3840x2160 using an HDMI cable. You might be surprised to find that HDMI 1.4 can support 4K resolutions, but it can do so only at 30 Hz (60 Hz 4K TVs won't be available until 2014 most likely), half the refresh rate of most TVs and monitors at 60 Hz. That doesn't mean we are limited to 30 FPS of performance though, far from it. As you'll see in our testing on the coming pages we were able to push out much higher frame rates using some very high end graphics solutions.
I should point out that I am not a TV reviewer and I don't claim to be one, so I'll leave the technical merits of the monitor itself to others. Instead I will only report on my experiences with it while using Windows and playing games - it's pretty freaking awesome. The only downside I have found in my time with the TV as a gaming monitor thus far is with the 30 Hz refresh rate and Vsync disabled situations. Because you are seeing fewer screen refreshes over the same amount of time than you would with a 60 Hz panel, all else being equal, you are getting twice as many "frames" of the game being pushed to the monitor each refresh cycle. This means that the horizontal tearing associated with Vsync will likely be more apparent than it would otherwise.
I would likely recommend enabling Vsync for a tear-free experience on this TV once you are happy with performance levels, but obviously for our testing we wanted to keep it off to gauge performance of these graphics cards.
Subject: Graphics Cards | April 15, 2013 - 07:34 PM | Tim Verry
Tagged: rumor, nvidia, kepler, gtx 700, geforce 700, computex
Recent rumors seem to suggest that NVIDIA will release its desktop-class GeForce 700 series of graphics cards later this year. The new card will reportedly be faster than the currently-available GTX 600 series, but will likely remain based on the company's Kepler architecture.
According to the information presented during NVIDIA's GTC keynote, its Kepler architecture will dominate 2012 and 2013. It will then follow up with Maxwell-based cards in 2014. Notably absent from the slides are product names, meaning the publicly-available information at least leaves the possibility of a refreshed Kepler GTX 700 lineup in 2013 open.
Fudzilla further reports that NVIDIA will release the cards as soon as May 2013, with an official launch as soon as Computex. Having actual cards available for sale by Computex is a bit unlikely, but a summer launch could be possible if the new 700 series is merely a tweaked Kepler-based design with higher clocks and/or lower power usage. The company is rumored to be accelerating the launch of the GTX 700 series in the desktop space in response to AMD's heavy game-bundle marketing, which seems to be working well at persuading gamers to choose the red team.
What do you make of this rumor? Do you think a refreshed Kepler is coming this year?
Subject: General Tech | April 12, 2013 - 06:08 AM | Tim Verry
Tagged: SECO, nvidia, mini ITX, kepler, kayla, GTC 13, GTC, CUDA, arm
Last month, NVIDIA revealed its Kayla development platform that combines a quad core Tegra System on a Chip (SoC) with a NVIDIA Kepler GPU. Kayla will out later this year, but that has not stopped other board makers from putting together their own solutions. One such solution that began shipping earlier this week is the mITX GPU Devkit from SECO.
The new mITX GPU Devkit is a hardware platform for developers to program CUDA applications for mobile devices, desktops, workstations, and HPC servers. It combines a NVIDIA Tegra 3 processor, 2GB of RAM, and 4GB of internal storage (eMMC) on a Qseven module with a Mini-ITX form factor motherboard. Developers can then plug their own CUDA-capable graphics card into the single PCI-E 2.0 x16 slot (which actually runs at x4 speeds). Additional storage can be added via an internal SATA connection, and cameras can be hooked up using the CIC headers.
Rear IO on the mITX GPU Devkit includes:
- 1 x Gigabit Ethernet
- 3 x USB
- 1 x OTG port
- 1 x HDMI
- 1 x Display Port
- 3 x Analog audio
- 2 x Serial
- 1 x SD card slot
The SECO platform is a proving to be popular for GPGPU in the server space, especially with systems like Pedraforca. The intention of using these types of platforms in servers is to save power by using a low power ARM chip for inter-node communication and basic tasks while the real computing is done solely on the graphics cards. With Intel’s upcoming Haswell-based Xeon chips getting down to 13W TPDs though, systems like this are going to be more difficult to justify. SECO is mostly positioning this platform as a development board, however. One use in that respect is to begin optimizing GPU-accelerated code for mobile devices. With future Tegra chips to get CUDA-compatible graphics cards, new software development and optimization of existing GPGPU code for smartphones and tablet will be increasingly important.
Either way, the SECO mITX GPU Devkit is available now for 349 EUR or approximately $360 (in both cases, before any taxes).
Subject: Graphics Cards | April 3, 2013 - 03:24 PM | Tim Verry
Tagged: nvidia, kepler, gtx 660 Ti, 660 ti
Two new photos recently popped up on Cowcotland, showing off an unreleased "Dragon Edition" GTX 660 Ti graphics card from ASUS. The new card boasts some impressive factory overclocks on both the GPU and memory as well as a beefy heatsink and a new blue and black color scheme.
The ASUS GTX 660 Ti Dragon will feature a custom cooler with two fans and an aluminum heastink. The back of the card includes a metal backplate to secure the cooler and help dissipate a bit of heat itself. However, there is also a cutout in the backplate to allow for (likely) additional power management circuitry. The card also features the company's power phase technology, NVIDIA's 660 Ti GK-104 GPU, and 2GB of GDDR5 memory. The graphics core is reportedly clocked at 1150MHz (no word on whether that is the base or boost figure) while the memory is overclocked to 6100MHz. For comparison, the reference GTX 660 Ti clocks are 915MHz base, 980MHz boost, and 6,000MHz memory. The new card will support DVI, DisplayPort, and HDMI video outputs.
There is no word on pricing or availability, but the Dragon looks like it will be one of the fastest GTX 660 Ti cards available when (if?) it publicly released!
NVIDIA releases the GeForce GT 700M family
NVIDIA revolutionized gaming on the desktop with the release of its 600-series Kepler-based graphics cards in March 2012. With the release of the GeForce GT 700M series, Kepler enters the mobile arena to power laptops, ultrabooks, and all-in-one systems.
Today, NVIDIA introduces four new members to its mobile line: the GeForce GT 750M, the GeForce GT 740M, the GeForce GT 735M, and the GeForce GT 720M. These four new mobile graphics processors join the previously-released members of the GeForce GT 700m series: the GeForce GT 730M and the GeForce GT 710M. With the exception of the Fermi-based GeForce GT 720M, all of the newly-released mobile cores are based on NVIDIA's 28nm Kepler architecture.
Notebooks based on the GeForce GT 700M series will offer in-built support for the following new technologies:
Automatic Battery Savings through NVIDIA Optimus Technology
Automatic Game Configuration through the GeForce Experience
Automatic Performance Optimization through NVIDIA GPU Boost 2.0
Subject: General Tech | March 28, 2013 - 07:47 PM | Ken Addison
Tagged: sli, podcast, pcper, nvidia, kepler, HD7790, GTX 560Ti BOOST, GCN, frame rating, crossfire, amd
PC Perspective Podcast #244 - 03/28/2013
Join us this week as we discuss the launch of Frame Rating, HD 7790 vs. GTX 650Ti BOOST, and news from GDC
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano
Program length: 1:19:22
Week in Review:
News items of interest:
1:00:00 Is there a Flash flood coming?
1:12:00 Hardware/Software Picks of the Week:
Allyn: Samsung 840 250GB for $147 on Buy.com (checkout price) (ends 3/31)
1-888-38-PCPER or email@example.com
Subject: General Tech, Graphics Cards | March 19, 2013 - 10:52 PM | Tim Verry
Tagged: GTC 2013, tyan, HPC, servers, tesla, kepler, nvidia
Server platform manufacturer TYAN is showing off several of its latest servers aimed at the high performance computing (HPC) market. The new servers range in size from 2U to 4U chassis and hold up to 8 Kepler-based Tesla accelerator cards. The new product lineup consists of two motherboards and three bare-bones systems. The S7055 and S7056 are the motherboards while the FT77-B7059, TA77-B7061, and FT48-B7055.
The TA77-B7061 is the smallest system, with support for two Intel Xeon E5-2600 processors and four Kepler-based Tesla accelerator cards. The FT48-B7055 has si7056 specifications but is housed in a 4U chassis. Finally, the FT77-B7059 is a 4U system with support for two Intel Xeon E5-2600 processors, and up to eight Tesla accelerator cards. The S7055 supports a maximum of 4 GPUs while the S7056 can support two Tesla cards, though these are bare boards so you will have to supply your own cards, processors, and RAM (of course).
According to TYAN, the new Kepler-based HPC systems will be available in Q2 2013, though there is no word on pricing yet.
Stay tuned to PC Perspective for further GTC 2013 Coverage!
Subject: Graphics Cards | March 8, 2013 - 02:17 PM | Tim Verry
Tagged: quadro, nvidia, kepler, k6000, gk110
Earlier this week, NVIDIA updated its Quadro line of workstation cards with new GPUs with GK104 “Kepler” cores. The updated line introduced four new Kepler cards, but the Quadro 6000 successor was notably absent from the NVIDIA announcement. If rumors hold true, professionals may get access to a K6000 Quadro card after all, and one that is powered by GK110 as well.
According to rumors around the Internet, NVIDIA has reserved its top-end Quadro slot for a GK110-based graphics card. Dubbed the K6000 (and in line with the existing Kepler Quadro cards), the high-end workstation card will feature 13 SMX units, 2,496 CUDA cores, 192 Texture Manipulation Units, 40 Raster Operations Pipeline units, and a 320-bit memory bus. The K6000 card will likely have 5GB of GDDR5 memory, like its Tesla K20 counterpart. Interestingly, this Quadro K6000 graphics card has one less SMX unit than NVIDIA’s Tesla K20X and even NVIDIA’s consumer-grade GTX Titan GPU. A comparison between the rumored K6000 card, the Quadro K5000 (GK104), and other existing GK110 cards is available in the table below. Also, note that the (rumored) K6000 specs put it more in like with the Tesla K20 than the K20X, but as it is the flagship Quadro card I felt it was still fair to compare it to the flagship Telsa and GeForce cards.
|Quadro K6000||Tesla K20X||GTX Titan||GK110 Full (Not available yet)||Quadro K5000|
|DP TFLOPS||~1.17 TFLOPS||1.31 TFLOPS||1.31 TFLOPS||~1.4 TFLOPS||.09 TFLOPS|
The Quadro cards are in an odd situation when it comes to double precision floating point performance. The Quadro K5000 which uses GK104 brings an abysmal 90 GFLOPS of double precision. The rumored GK110-powered Quadro K6000 brings double precision performance up to approximately 1 TFLOPS, which is quite the jump and shows that GK104 really was cut down to focus on gaming performance! Further, the card that the K6000 is replacing in name, the Quadro 6000 (no prefixed K), is based on NVIDIA’s previous-generation Fermi architecture and offers .5152 TFLOPS (515.2 GFLOPS) of double precision performance. On the plus side, users can expect around 3.5 TFLOPS of single precision horsepower, which is a substantial upgrade over Quadro 6000's 1.03 TFLOPS of single precision floating point. For comparison, the GK104-based Quadro K5000 offers 2.1 TFLOPS of single precision. Although it's no full GK110, it looks to be the Quadro card to beat for the intended usage.
Of course, Quadro is more about stable drivers, beefy memory, and single precision than double precision, but it would be nice to see the expensive Quadro workstation cards have the ability to pull double duty, as it were. NVIDIA’s Tesla line is where DP floating point is key. It is just a rather wide gap between the two lineups that the K6000 somewhat closes, fortunately. I would have really liked to see the K6000 have at least 14 SMX units, to match consumer Titan and the Tesla K20X, but rumors are not looking positive in that regard. Professionals should expect to see quite the premium with the K6000 versus the Titan, despite the hardware differences. It will likely be sold for around $3,000.
No word on availability, but the card will likely be released soon in order to complete the Kepler Quadro lineup update.
Subject: Graphics Cards | February 21, 2013 - 06:12 PM | Ryan Shrout
Tagged: video, titan, nvidia, live review, live, kepler, geforce titan, geforce
Missed the live event? Here is the full replay feature me and Tom Petersen!
Hopefully by now you have read our review of the NVIDIA GeForce GTX TITAN 6GB graphics card that was just released. This is definitely a product release that highlights a generations of GPUs and I would really encourage you to read the article and offer your feedback.
However, we have another event to promote right now: NVIDIA's Tom Petersen will be joining me on PCPer Live! at 11am PT / 2pm ET to talk about the GeForce GTX TITAN and its performance, features, pricing and more!
GeForce GTX TITAN Live Review Stream
11am PT / 2pm ET - February 21st
If you have questions for Tom or me, you can leave them in the comments below (no registration required)!
Subject: Graphics Cards | February 21, 2013 - 05:57 PM | Jeremy Hellstrom
Tagged: titan, nvidia, kepler, gtx titan, gk110, geforce
Before getting into the performance of the $1000 NVIDIA TITAN it is worth looking at the improvements NVIDIA has added to this GK110 beast. At 10.5" long it is a half inch longer than a 680 and a full 1.5" shorter than a 690, which allows it to fit in a wider variety of cases and the vastly improved thermals allow the usage of much smaller cases than other high end GPUs can manage without exotic cooling solutions. There is also a reduction in noise generated, to the point where SLI'd TITANs run quieter than some single card solutions, not to mention much faster. To take a look at just how much faster you can see [H]ard|OCP's results which you can compare to Ryan's results.
"NVIDIA is launching a TITAN today, literally, the new GeForce GTX TITAN video card is here, and we have a lot to talk about. We test single-GPU and 2-way SLI today, with more to follow later. We will find out if this TITAN of a video card really is worth it, and just who this video card is designed for. Be prepared to face the fastest single-GPU video card."
Here are some more Graphics Card articles from around the web:
- Nvidia's GeForce GTX Titan @ The Tech Report
- NVIDIA GTX TITAN @ Overclockers.com
- NVIDIA’s GeForce GTX Titan Review, Part 2: Titan's Performance Unveiled @ AnandTech
- NVIDIA GeForce GTX Titan Gaming Review @ OCC
- NVIDIA GeForce GTX TITAN 6GB Performance Review @ Hardware Canucks
- NVIDIA GeForce GTX TITAN 6 GB @ techPowerUp
- NVIDIA GeForce GTX TITAN SLI & Tri-SLI @ techPowerUp
- MSI GTX 670 Twin Frozr Power Edition OC 2GB @ Tweaktown
- Desktop Graphics Card Comparison Guide @ TechARP
- HIS Radeon HD 7850 iPower IceQ Turbo 4GB Crossfire @ Legion Hardware