Subject: General Tech, Motherboards | March 6, 2014 - 04:53 AM | Scott Michaud
Tagged: motherboards, Kabini, asus
AMD has just released Kabini as a socketed SoC with the AM1 platform. Not far behind is a few motherboards... because who wants a socketed APU without a socket? Chumps, that's who. Since no-one wants to be a chump, ASUS is getting ready to release two options in April. They are designed for low-power desktops and home theatre PCs.
The two boards are named the AM1M-A (Micro ATX) and the AM1I-A (Mini ITX). Otherwise, the two boards are very similar, but not identical. For instance, the Micro ATX version has two extra USB 3.0 ports while the Mini ITX has an extra COM header. The Micro ATX also has VD... by that, I mean a Realtek ALC887-VD sound card, where the Mini ITX has the ALC887 sound card without the suffix (I do not think there is a difference). The Micro ATX board also has a PCIe x16 slot (although it is electrically PCIe x4) to connect a larger-socketed add-in board (AIB) to it. As far as I can tell, they are basically the same, though.
Both motherboards will be available in April, but we do not yet have pricing information.
If interested, check out ASUS' press release after the break.
Subject: Motherboards | March 6, 2014 - 04:35 AM | Tim Verry
Tagged: SoC, msi, mini ITX, Kabini, FS1B, AM1
MSI recently introduced its first motherboard based around AMD’s new AM1 platfrom called the AM1I. The new board uses the mini ITX form factor while supporting a Kabini SoC and all of its IO options including SATA III, USB 3, Gigabit Ethernet, and triple display outputs.
The AM1I sports a FS1B CPU socket, two DDR3 DIMM slots (a maximum of 32GB single channel memory at 1600MHz), two SATA III 6Gbps ports, a single PCI-E 2.0 x16 slot (electrically x4), and a single mPCI-E connector. The mini ITX AM1I motherboard further features a TPM connector, 7.1 channel Realtek ALC887 audio chipset, and a Realtek RTL8111G Gigabit Ethernet controller.
The AM1 Platform uses the FS1B socket and a new cooler mounting system (though the boards spotted at CES used a traditional FM2/AM3 HSF mount). So far, it appears the only heatsinks available will be those bundled with Kabini chips in retail boxes.
The rear I/O panel of the AM1I includes:
- 2 x PS/2
- 3 x Video outputs
- 1 x HDMI
- 1 x DVI
- 1 x VGA
- 2 x USB 3.0
- 2 x USB 2.0
- 1 x RJ45 (GbE)
- 3 x analog audio outputs
MSI has not released exact pricing or availability, but expect the board to arrive sometime in mid-April for well under $40 (AMD has stated that the AM1 platform (FS1B motherboard plus a Kabini SoC) will cost around $60). Note that AM1 platform boards are extremely low cost because the IO is contained within the Kabini chip and not by on-motherboard chipsets.
Low Power and Low Price
Back at CES earlier this year, we came across a couple of interesting motherboards that were neither AM3+ nor FM2+. These small, sparse, and inexpensive boards were actually based on the unannounced AM1 platform. This socket is actually the FS1b socket that is typically reserved for mobile applications which require the use of swappable APUs. The goal here is to provide a low cost, upgradeable platform for emerging markets where price is absolutely key.
AMD has not exactly been living on easy street for the past several years. Their CPU technologies have not been entirely competitive with Intel. This is their bread and butter. Helping to prop the company up though is a very robust and competitive graphics unit. The standalone and integrated graphics technology they offer are not only competitive, but also class leading in some cases. The integration of AMD’s GCN architecture into APUs has been their crowning achievement as of late.
This is not to say that AMD is totally deficient in their CPU designs. Their low power/low cost designs that started with the Bobcat architecture all those years back have always been very competitive in terms of performance, price, and power consumption. The latest iteration is the Kabini APU based on the Jaguar core architecture paired with GCN graphics. Kabini will be the part going into the FS1b socket that powers the AM1 platform.
Kabini is a four core processor (Jaguar) with a 128 unit GCN graphics part (8 GCN cores). These APUs will be rated at 25 watts up and down the stack. Even if they come with half the cores, it will still be a 25 watt part. AMD says that 25 watts is the sweet spot in terms of performance, cooling, and power consumption. Go lower than that and too much performance is sacrificed, and any higher it would make more sense to go with a Trinity/Richland/Kaveri solution. That 25 watt figure also encompasses the primary I/O functionality that typically resides on a standalone motherboard chipset. Kabini features 2 SATA 6G ports, 2 USB 3.0 ports, and 8 USB 2.0 ports. It also features multiple PCI-E lanes as well as a 4x PCI-E connection for external graphics. The chip also supports DisplayPort, HDMI, and VGA outputs. This is a true SOC from AMD that does a whole lot of work for not a whole lot of power.
Subject: General Tech, Systems | March 2, 2014 - 07:29 AM | Scott Michaud
Tagged: Tamesh, Kabini, fit-PC4, compulab, amd
Passively cooled PCs are an interesting niche, often associated with the need for silence. Be it audio recording or home theater appliances, some situations are just not well suited to having a whirring fan.
Recently announced is the fit-PC4 is a fanless system, fourth in its lineage. This time the system is using AMD for its CPU and GPU. Two models are available, separated into "Pro" and "Value". Its specifications are broken down into the table below.
|fit-PC4 Pro||fit-PC4 Value|
|Processor||AMD GX-420CA (25W TDP, Kabini)||AMD A4-1250 APU (8W TDP, Temash)|
|- CPU||Quad-core (Jaguar-based) @ 2.0 GHz||Dual-core (Jaguar-based) @ 1.0 GHz|
|- GPU||Radeon HD 8400E||Radeon HD 8210|
|RAM||Up to 16GB (2 DIMM)|
|Storage||2.5" HDD/SSD + mSATA + microSD|
2x HDMI 1.4a (1920x1200 max) with CEC support
S/PDIF, line-out, mic-in (I assume 3.5mm)
2x Gigabit Ethernet
mini-PCIe slot for cellular modem
2x USB 3.0 and 6x USB 2.0
|Bluetooth||4.0||3.0 + HS|
|Dimensions||16cm x 19cm x 3.7cm||16cm x 16cm x 2.5cm|
Interestingly, the company considers these devices "ruggedized" as well as fanless. As such, they have a 5-year warranty. It seems to be quite the feature-packed device with two HDMI 1.4 outlets, two Gigabit Ethernet ports, and an available slot for a cellular modem. The Pro even has 802.11ac WiFi. I am not entirely sure the intended purpose of this device, but the company claims that the previous generation product was often purchased by video surveillance and digital signage customers. Interestingly, Windows 7 and Linux are the two choices for operating systems.
The fit-PC4 is available now in either a $299 (Value-Barebone) or $380 (Pro-Barebone) model.
Subject: General Tech | February 14, 2014 - 07:43 PM | Jeremy Hellstrom
Tagged: amd, Kabini
As you may have heard mention of on the podcast last night, AMD has a habit of crowding the lower end of the CPU and GPU markets with a wde variety of choices of product separated by very little money. While this can lead some entry level PC buyers to a bit of confusion at first, having a wide variety of choices is a good thing for the consumer. DigiTimes reported on an interesting decision made by AMD which bucks that trend, at least in China. It would seem that instead of releasing Kabini there, AMD is depending on the deep price cuts they've applied to previous generations of APU to compete against Intel as those price cuts would make Kabini much less attractive in that market. As a bonus we also received confirmation that Beema is still on schedule for the second half of this year.
"AMD is expected to ship 300,000 Kabini processors in the first quarter of 2014, 1.2 million units in the first half, and 3.8-3.9 million units in the whole year, the sources indicated."
Here is some more Tech News from around the web:
- How about a Radeon R9 290X for 900 bucks? @ The Tech Report
- Samsung ramping up 25nm production for DRAM @ DigiTimes
- The UNTOLD SUCCESS of Microsoft: Yes, it's Windows 7 @ The Register
- Lenovo cracks its first ever $10bn quarter @ The Register
- Indonesia market: BlackBerry to stage a turnaround with Jakarta model @ DigiTimes
- Win MSI GTX760 Gaming and Z87I Gaming ITX combo! @ Kitguru
Subject: General Tech, Processors | January 27, 2014 - 02:28 AM | Scott Michaud
Tagged: AM1, Kabini, amd
Chinese VR-Zone published claims that AMD will have up to four processors planned for AM1. This is the brand of socket designed for the upcoming Kabini APUs that we have discussed since the CES time frame. Three of the upcoming processors will be quad-core with one dual-core for variety. Regardless of core count, all four processors are listed at 25 watts (TDP).
Kabini pairs Jaguar cores, for x86-based serial processing, with a GCN-based graphics processor supporting DirectX 11.1. Users planning to purchase Kabini for use with Windows 8.1 should expect to miss out on some or all of the benefits associated with DirectX 11.2 (along with everyone on Windows 8 and earlier). Little of value would be lost, however.
These products are expected to be positioned against Bay Trail-D which powers Intel's Pentium and Celeron lines. The currently available products from Intel are classified at 10W TDP and around 2 GHz.
Kaveri and socketed Kabini at CES 2014
AMD is pushing lesser-clocked (and higher TDP) products based on Jaguar against Intel's Silvermont. I am not sure sure how the two architectures compare although I would expect the latter to win out clock-for-clock and watt-for-watt. Then again, cost and graphics performance could be significantly superior with AMD. Ultimately, it will be up to the overall benchmarks (and pricing) to see how they will actually stack up.
Subject: Motherboards | January 6, 2014 - 09:19 AM | Ryan Shrout
Tagged: CES, CES 2014, video, msi, amd, A88X, Kabini, Kaveri
One of our first meetings at CES 2014 was with MSI. Below we have a video of the company's latest iterations on the AMD-family of motherboards including a Gaming Series mATX offering, a mini-ITX FM2+ board (perfect for Kaveri's release) as well as the only socketed AMD Kabini platform we have seen!
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech | December 18, 2013 - 06:21 PM | Jeremy Hellstrom
Tagged: amd, 2014, beema, Kabini, FS1B
DigiTimes has put together an overview of AMD's plans to take back market share over the coming year, though of course AMD is not confirming or denying the accuracy of their report. First off will be the coming of the 28nm Kaveri family in January with availability planned to follow quickly. Beema, which will be based on the Puma+ architecture should arrive in the summer but there is also a Kabini-based series for the new socket, FS1B, which will get limited release in some areas. FS1B will be used for up coming Sempron and Athlon models designed for low power usage scenarios though don't expect to see AM3+ or FM2 disappear any time soon. You will have to wait for 2015 before Carrizo and Nolan make an appearance.
"AMD has been enhancing the marketing of its processors in DIY markets and aims to increase its global DIY market share from about 30% currently to 40%, and to reach a DIY market share above 45% in China in particular, at the end of 2014, according to Taiwan-based motherboard makers."
Here is some more Tech News from around the web:
- NVIDIA Optimus On Ubuntu 13.10 Linux vs. Windows 8.1 @ Phoronix
- Microsoft admits: We WON'T pick the next Steve Ballmer this year @ The Register
- Drawers full of different chargers? The IEC has a one-plug-to-rule-them-all @ The Register
- Bogus Firefox add-on FORCES WITLESS USERS to join vuln-hunting party @ The Register
- Samsung, TSMC to share Apple 14/16nm chip orders @ DigiTimes
- Half of IT pros plan to use Windows XP after support ends in 2014 @ The Inquirer
- Porsche Proves MPAA Wrong By Letting You Download a Car @ [H]ard|OCP
Subject: General Tech | August 27, 2013 - 04:30 PM | Jeremy Hellstrom
Tagged: amd, roadmap, 2014, Kaveri, Kabini, carrizo, beema, Excavator, Nolan, 2015, socket sf1b
As is usually the case, AMD will not comment on the accuracy of DigiTimes information but as we have seen in the past their roadmaps have been spot on. Over the next 8 months or so will see the arrival of the Hawaii GPU family and the entrance of Kaveri and Kabini chips, nothing new there but good to have independent confirmation. In the latter part of 2014 and 2015 things are a little more interesting as Beema will replace Kabini with an HSA compliant architecture and use a new socket called FS1B. In 2015 Beema will be replaced by a chip called Nolan and we will finally see the Excavator based Carrizo which are slated to have 45W and 65W versions.
You can expect to see FM1 and AM3 phased out of active production by the end of 2013, with AM3+ and FM2 being the two active sockets until FS1B arrives.
"AMD has recently updated its product roadmap and is set to release its Hawaii-based GPUs at the end of September, Kaveri-based APUs for the high-end segment and Kabini-based APUs for the entry-level segment in the first quarter of 2014, according to sources from the upstream supply chain."
Here is some more Tech News from around the web:
- What Surface RT flop? Nokia said to be readying WinRT slab for September @ The Register
- Java 6 exploit found in the wild @ The Inquirer
- Chlorine has got graphene covered @ Nanotechweb
- Samsung will launch a 55in curved OLED 3D TV in the UK on 5 September @ The Inquirer
- The 20 most bizarre and innovative motherboards: 1999 - 2010 @ Hardware.Info
- NAND flash vendors gearing up for 3D chips @ DigiTimes
- Epic Games’ Tim Sweeney and AMD don’t see eye-to-eye on hUMA @ VR-Zone
- Linksys Smart Wi-Fi Router EA6500 @ Kitguru
- TP-Link TL-PA551KIT AV550+ Gigabit Powerline Kit With AC Passthrough @ eTeknix
- Making S’mores with 50,000 Volts @ Hack a Day
Subject: General Tech, Graphics Cards, Processors | August 22, 2013 - 05:39 PM | Ryan Shrout
Tagged: sony, ps4, playstation 4, Kabini, hUMA, amd
UPDATE: I have added new info at the bottom of this post with more commentary from AMD (kind of).
You might have seen some reports in the last couple of days claiming that the upcoming Sony PlayStation 4 (PS4) will have a big advantage over the Xbox One thanks to its unique ability to support AMD's hUMA memory architecture. hUMA, heterogeneous unified memory architecture, is an exciting new memory technology that AMD has built into upcoming APUs.
Josh published a story on hUMA that sums it as so:
The idea behind hUMA is quite simple; the CPU and GPU share memory resources, they are able to use pointers to access data that has been processed by either one or the other, and the GPU can take page faults and not rely only on page locked memory. Memory in this case is bi-directionally coherent, so coherency issues with data in caches which are later written to main memory will not cause excessive waits for either the CPU or GPU to utilize data that has been changed in cache, but not yet written to main memory.
There's just one problem with these various reports (VR-Zone, ExtremeTech): they're incorrect. After sending some emails to our representatives at AMD I was told that "Kabini doesn't support hUMA" which is the APU that both the PS4 and Xbox One processors are based on. AMD further clarified with us:
Our spokesperson made inaccurate statements about our semi-custom APU architectures and does not speak for Microsoft, Sony or the AMD semi-custom business unit responsible for co-developing the next generation console APUs.
So while the PS4 will still be a faster system thanks to its higher SIMD processor (GPU core) count, there is no support for a true heterogeneous unified memory architecture in either upcoming console platform.
NOTE: I have had several people point out that it's possible Sony and Microsoft worked on their own custom memory architectures that will perform similar functionally to hUMA. That is entirely possible but means that official hUMA support isn't on the SoCs.
UPDATE: AMD contacted me again to make another comment. Essentially, they said that the correction statement to the original statement claiming hUMA was part PS4 was "inaccurrate" but that this correction does NOT mean the opposite claim is true. Even when pressed for a more specific and debate-ending comment, AMD wouldn't give us any more information.
So does the PS4 have support for some type of heterogeneous unified memory? Maybe. And the Xbox One? Maybe. At this point, I'd stop listening to anything AMD has to say on the subject as they are likely to recant it shortly thereafter. Many readers have emailed me with their thoughts and I personally feel that its more likely the original statement from AMD (that the PS4 will have the edge with a hUMA design) will turn out to be the truth in the long run...