Subject: Storage | January 3, 2014 - 03:07 PM | Jeremy Hellstrom
Tagged: M.2, ssd, kingspec, jmicron
If you aren't familiar with just how cute the M.2 form factor is, the picture below shows it attached just below a SATA power and data connector which, when you include the plugs, is significantly larger than the 128GB M.2 SSD. This allows you to slip this style of SSD into just about any sized device you could want as long as you have an M.2 connector. The KingSpec models that The SSD Review just benchmarked use a JMicron so aren't the fastest on the block but that has nothing to do with the size as these top out at SATA 6Gbps just like any other drive. Check their full reivew here.
"The KingSpec CHA-M2B7 M.2 NGFF ultrabook SSD is available in capacities of 32, 64 an 128GB and is a 42mm(L) X 22mm(W)X3.2mm(H) SATA M.2 SSD. To say it is small is an understatement as we can fit four of these on a typical business card with plenty of room to spare. "
Here are some more Storage reviews from around the web:
- Kingston SSDNow KC300 240GB SSD Upgrade Kit @ NikKTech
- VisionTek Go Drive SSD @ The SSD Review
- Seagate 600 Pro 200GB Enterprise SSD @ Custom PC Review
- Western Digital Black2 Dual Drive @ The SSD Review
- Western Digital My Cloud 2TB NAS Review @ Legit Reviews
Introduction, Specifications and Packaging
If you're into the laptop storage upgrade scene, you hear the same sort of arguments all the time. "Do I go with a HDD for a large capacity and low cost/GB, but suffer performance"? "I want an SSD, but can't afford the capacity I need"! The ideal for this scenario is to combine both - go with a small capacity SSD for your operating system and apps, while going with a larger HDD for bulk storage at a lower cost/GB. The catch here is that most mobile platforms only come with a single 2.5" 9.5mm storage bay, and you just can't physically fit a full SSD and a full HDD into that space, can you? Well today Western Digital has answered that challenge with the Black2 Dual Drive:
Yup, we're not kidding. This is a 120GB SSD *and* a 1TB HDD in a single package. Not a hybrid. Two drives, and it's nothing short of a work of art.
Subject: Storage | September 4, 2013 - 02:37 AM | Tim Verry
Tagged: ssd, PCIe SSD, msata, LSI, kingspec, jmicron
KingSpec recently started shipping a new PCI-E based SSD that achieves more than 2.5GB/s sequential read performance from multiple mSATA SSDs behind a 6Gbps LSI RAID controller. The KingSpec MC2J677M1T is a full height expansion card with a PCI-E 2.0 x8 interface.
The new KingSpec solid state drive is bootable and uses a 6Gbps LSI RAID controller that connects to eight 6Gbps mSATA slots. The drive comes in 1TB and 2TB total capacities and the eight 6Gbps mSATA slots are occupied by eight 128GB or 256GB mSATA SSDs. Each mSATA SSD is powered by a Jmircon SSD controller, NANYA-manufactured DRAM cache, and Intel MLC NAND flash. Further, the LSI RAID controller is actively cooled by a small fan.
As far as performance goes, the 1TB model is rated at 84,000 IOPS and approximately 2GB/s sequential read and write transfer speeds. The SSD Review received a sample of the new drive and provided some preliminary benchmark results in the form of an ATTO benchmark run. At a queue depth of 4, the KingSpec MC2J677M1T achieved 4K reads of 2567 MB/s and 4K writes of 1613 MB/s.
The 1TB KingSpec PCI-E SSD will be available later this year for between $2,000 and $3,000 USD.
When asked for his thoughts, PC Perspective storage editor Allyn Malventano noted that the eight JMicron-driven mSATA SSDs in RAID is just asking for trouble, and the 4K random IO offered by the drive is actually less than some single drive SATA SSDs on the market. Unfortunately, the LSI RAID controller is “a major bottleneck for SSD-level random access.”
Get notified when we go live!