Subject: General Tech, Graphics Cards, Processors | September 6, 2014 - 09:25 PM | Scott Michaud
Tagged: iris pro, iris, intel hd graphics, Intel
I was originally intending to test this with benchmarks but, after a little while, I realized that Ivy Bridge was not supported. This graphics driver starts and ends with Haswell. While I cannot verify their claims, Intel advertises up to 30% more performance in some OpenCL tasks and a 10% increase in games like Batman: Arkham City and Sleeping Dogs. They even claim double performance out of League of Legends at 1366x768.
Intel is giving gamers a "free lunch".
The driver also tunes Conservative Morphological Anti-Aliasing (CMAA). They claim it looks better than MLAA and FXAA, "without performance impact" (their whitepaper from March showed a ~1-to-1.5 millisecond cost on Intel HD 5000). Intel recommends disabling it after exiting games to prevent it from blurring other applications, and they automatically disable it in Windows, Internet Explorer, Chrome, Firefox, and Windows 8.1 Photo.
Adaptive Rendering Control was also added in this driver. This limits redrawing identical frames by comparing the ones it does draw with previously drawn ones, and adjusts the frame rate accordingly. This is most useful for games like Angry Birds, Minesweeper, and Bejeweled LIVE. It is disabled when not on battery power, or when the driver is set to "Maximum Performance".
When Magma Freezes Over...
Intel confirms that they have approached AMD about access to their Mantle API. The discussion, despite being clearly labeled as "an experiment" by an Intel spokesperson, was initiated by them -- not AMD. According to AMD's Gaming Scientist, Richard Huddy, via PCWorld, AMD's response was, "Give us a month or two" and "we'll go into the 1.0 phase sometime this year" which only has about five months left in it. When the API reaches 1.0, anyone who wants to participate (including hardware vendors) will be granted access.
AMD inside Intel Inside???
I do wonder why Intel would care, though. Intel has the fastest per-thread processors, and their GPUs are not known to be workhorses that are held back by API call bottlenecks, either. Of course, that is not to say that I cannot see any reason, however...
Subject: Editorial, General Tech, Graphics Cards | January 22, 2014 - 07:12 AM | Scott Michaud
Tagged: linux, intel hd graphics, haswell
Looking through this post by Phoronix, it would seem that Intel had a significant regression in performance on Ubuntu 14.04 with the Linux 3.13 kernel. In some tests, HD 4600 only achieves about half of the performance recorded on the HD 4000. I have not been following Linux iGPU drivers and it is probably a bit late to do any form of in-depth analysis... but yolo. I think the article actually made a pretty big mistake and came to the exact wrong conclusion.
Let's do this!
According to the article, in Xonotic v0.7, Ivy Bridge's Intel HD 4000 scores 176.23 FPS at 1080p on low quality settings. When you compare this to Haswell's HD 4600 and its 124.45 FPS result, this seems bad. However, even though they claim this as a performance regression, they never actually post earlier (and supposedly faster) benchmarks.
So I dug one up.
Back in October, the same test was performed with the same hardware. The Intel HD 4600 was not significantly faster back then, rather it was actually a bit slower with a score of 123.84 FPS. The Intel HD 4000 managed 102.68 FPS. Haswell did not regress between that time and Ubuntu 14.04 on Linux 3.13, Ivy Bridge received a 71.63% increase between then and Ubuntu 14.04 on Linux 3.13.
Of course, there could have been a performance increase between October and now and that recently regressed for Haswell... but I could not find those benchmarks. All I can see is that Haswell has been quite steady since October. Either way, that is a significant performance increase on Ivy Bridge since that snapshot in time, even if Haswell had a rise-and-fall that I was unaware of.
Subject: Processors | April 18, 2013 - 01:48 AM | Tim Verry
Tagged: overclocking, intel ivr, intel hd graphics, Intel, haswell, cpu
During the Intel Developer Forum in Beijing, China the X86 chip giant revealed details about how overclocking will work on its upcoming Haswell processors. Enthusiasts will be pleased to know that the new chips do not appear to be any more restrictive than the existing Ivy Bridge processors as far as overclocking. Intel has even opened up the overclocking capabilities slightly by allowing additional BCLK tiers without putting aspects such as the PCI-E bus out of spec.
The new Haswell chips have an integrated voltage regulator, which allows programmable voltage to both the CPU, Memory, and GPU portions of the chip. As far as overclocking the CPU itself, Intel has opened up the Turbo Boost and is allowing enthusiasts to set an overclocked Turbo Boost clockspeed. Additionally, Intel is specifying available BCLK values of 100, 125, and 167MHz without putting other systems out of spec (they use different ratios to counterbalance the increased BCLK, which is important for keeping the PCI-E bus within ~100Mhz). The chips will also feature unlocked core ratios all the way up to 80 in 100MHz increments. That would allow enthusiasts with a cherry-picked chip and outrageous cooling to clock the chip up to 8GHz without overclocking the BCLK value (though no chip is likely to reach that clockspeed, especially for everyday usage!).
Remember that the CPU clockspeed is determined by the BCLK value times a pre-set multiplier. Unlocked processors will allow enthusiasts to adjust the multiplier up or down as they please, while non-K edition chips will likely only permit lower multipliers with higher-than-default multipliers locked out. Further, Intel will allow the adventurous to overclock the BLCK value above the pre-defined 100, 125, and 167MHz options, but the chip maker expects most chips will max out at anywhere between five-to-seven percent higher than normal. PC Perspective’s Morry Teitelman speculates that slightly higher BCLK overclocks may be possible if you have a good chip and adequate cooling, however.
Similar to current-generation Ivy Bridge (and Sandy Bridge before that) processors, Intel will pack Haswell processors with its own HD Graphics pGPU. The new HD Graphics will be unlocked and the graphics ratio will be able to scale up to a maximum of 60 in 50MHz steps for a potential maximum of 3GHz. The new processor graphics cards will also benefit from Intel’s IVR (programmable voltage) circuitry. The HD Graphics and CPU are fed voltage from the integrated voltage regulator (IVR), and is controlled by adjusting the Vccin value. The default is 1.8V, but it supports a recommended range of 1.8V to 2.3V with a maximum of 3V.
Finally, Intel is opening up the memory controller to further overclocking. Intel will allow enthusiasts to overclock the memory in either 200MHz or 266MHz increments, which allows for a maximum of either 2,000MHz or 2,666MHz respectively. The default voltage will depend on the particular RAM DIMMs you use, but can be controlled via the Vddq IVR setting.
It remains to be seen how Intel will lock down the various processor SKUs, especially the non-K edition chips, but at least now we have an idea of how a fully-unlocked Haswell processor will overclock. On a positive note, it is similar to what we have become used to with Ivy Bridge, so similar overclocking strategies for getting the most out of processors should still apply with a bit of tweaking. I’m interested to see how the integration of the voltage regulation hardware will affect overclocking though. Hopefully it will live up to the promises of increased efficiency!
Are you gearing up for a Haswell overhaul of your system, and do you plan to overclock?