Another look at CoolerMaster's return to the Vapour Chamber

Subject: Cases and Cooling | June 21, 2012 - 02:20 PM |
Tagged: coolermaster, TPC-812, heatsink, heatpipes

Heatpipes have been in vogue for a while now, but once long ago it was vapour chambers which made for the best heatsinks, a fact which CoolerMaster has not forgotten.  Their new TPC-812 shows one of the reasons that heatpipes took over, as the vapour chamber never starts to show promise until the second fan was added.  The extra surface area from the combination of vapour chamber and heatpipes benefits from the increased airflow but at the cost of additional noise, whereas many heatpipe only coolers will not show the same level of improvement.  On the other hand they provide better cooling with only one fan making them the choice of people with sensitive ears.  X-bit Labs were not terribly impressed and suggest that maybe the vapour chamber should stay forgotten.

x-b_07_cm812_pt_big.jpg

"CPU coolers have finally sported something new in their design. Although, I think, it would be more correct to say that it is more of a well forgotten old, rather than something completely new. Maybe it was a mistake to give up the vapor chamber technology a while back? Let’s find out with the help of the new Cooler Master cooler."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: X-Bit Labs

Coolermaster's new vapourware, the TPC-812 heatsink

Subject: Cases and Cooling | May 16, 2012 - 05:29 PM |
Tagged: coolermaster, TPC-812, heatsink, heatpipes

Coolermaster's new TPC-812 goes beyond the heatpipes which we have all become familiar with and adds in vapour chambers as well.  The vapour chamber works similarly to a heatpipe but instead of heat only being able to travel away in one direction, the chamber allows heat to be dissipated in to directions.  Unfortunately in order to properly work it needs to remain quite small in size so while it can quickly spread out heat it needs help from something else to keep that heat moving away.  The cooler was fairly noisy when FrostyTech ran the fan at full speed but also offered among the most effective cooling performance and when they dialed the fan back its performance ended up in the middle of the pack but for someone using a moderately powerful CPU and wanting less noise it should move enough heat to remain effective.

FT_CMTPC812_pspc.jpg

"Vapour chambers and heatpipes work on the same principle, the difference is that vapour chambers are planar thermal devices that conduct heat in two dimensions. The two 19x3mm vapour chambers on the Coolermaster TPC-812 heatsink are double-stacked (one vapour chamber on top of three heatpipes), much like the Xigmatek Aegir. Since vapour chambers are planar devices this represents a more efficient application that piling tubular heatpipes on top of tubular heatpipes. Coolermaster's TPC-812 is the first CPU heatsink to pass our test bench employing both vapour chambers and heatpipes in one package."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: Frosty Tech

Gamer Storm's new heatsink wants to Assassin-ate your heat problems

Subject: Cases and Cooling | May 4, 2012 - 12:59 PM |
Tagged: Gamer Storm, Assassin, heatsink, heatpipes

Following in the current trend of trying to give your newest heatsink a bizarre name comes the Gamer Storm Assassin, a 5.7" x 6.1" x 6.3" (144 x 154 x 160 mm) dual tower heatsink.  The cooler comes with a pair of mismatched fans, a 120mm fan for use on one of the sides of the tower and a 140mm for use in between the towers.  That does not seem to have hurt performance at all, Hardware Secrets tests show it to not only be an effective cooler but also one that does not generate excessive noise.  It will fit both AMD and Intel sockets, so whichever you are using you might want to ignore the name and consider this cooler for your system.

HS_assass.jpg

"The Assassin is the first CPU cooler from Gamer Storm, a brand of cooling products from Logisys/Deepcool, aimed at gamers. This huge cooler has two twin tower heatsinks, eight heatpipes, one 120 mm fan and one 140 mm fan. We already reviewed the Dracula VGA cooler from this brand."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Wow, that Gelid heatsink sure is stacked

Subject: Cases and Cooling | November 2, 2011 - 04:56 PM |
Tagged: Gelid, GX-7 Stacked, heatpipes

The Gelid GX-7 Stacked is so named because of its 7 heatpipes, five of which are placed normally and touch the CPU while the last two are stacked on top of the five aforementioned heatpipes.  On low settings this is one of the quietest coolers on FrostyTech's charts, when running at full speed it creates more noise but not enough to make it one of the louder coolers they've tested.  The new configuration for heatpipes was effective but not overwhelmingly so, as the heatsink was neither the quietest nor the most efficient cooler but sat in the middle of the pack as a solid all

FT_gelidGX7_pspc.jpg

"The Gelid GX-7 heatsink stands 158mm tall and ships with a variable speed PWM fan internally illuminated by several very bright blue LEDs. The lights make a nice impression on the spinning blue fan blades which feature novel little 'wing tips'. Beyond that, the GX-7 would look like any other tower format heat sink except for one trick up its sleeve - stacked heatpipes."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

 

Source: Frosty Tech