More About HDPLEX H5

Subject: Cases and Cooling | September 15, 2015 - 02:57 PM |
Tagged: HDPLEX, h5, fanless

FanlessTech has another look at the HDPLEX H5. Their last preview did not have pictures of the case itself, so I needed to use a photo of the previous model when I wrote up our coverage of it. This time, seven whole months later, we have more details. It will weigh eight kilograms, its supported CPU cooling performance has been bumped up five watts to 95W TDP, and it will mini-ITX, microATX, and even full ATX motherboards.


Image Credit: FanlessTech

The chassis has 16 heat pipes connected from the case, which acts as a heatsink, to the internal components -- eight pipes to the CPU and eight to the discrete GPU (if installed). This makes it an effective home theater PC case, accepting CPUs up to the Intel Core i7-6700K (which is 95W). The same number of heat pipes go to the GPU, but that TDP is not listed. If it is similar to the CPU's 95W limit, that doesn't go too far in GPU land. Don't expect to passively cool a 980 Ti or anything. Still a discrete GPU of any magnitude is a nice addition to a fanless PC.


Image Credit: FanlessTech

One minor point before we close out, HDPLEX will apparently support custom aluminum power buttons and face plates. It's a small novelty but it could be nice if the system is in a visible location.

The HDPLEX H5 doesn't have a release date yet, but its price will apparently be under $300.

Source: FanlessTech

HDPLEX Creates Fanless, Internal PSU for NUC and Thin-ITX

Subject: Cases and Cooling | September 8, 2015 - 07:00 AM |
Tagged: PSU, nuc, Intel, HDPLEX, Fanless PSU

In an effort to make small form factor PCs even smaller, HDPLEX has created an internal power supply for them. Added benefit: it's fanless and supports up to 80W. This is designed to replace the power bricks that are apparently common for most builds, meaning that you have one less thing to hide behind something else.


The unit takes up 121.5mm x 30mm x 40mm, which works out to 4.8”, 1.2”, and 1.6” for people who like measurement systems without simple decimal shift conversions. This is on par with some external power bricks that I've seen for the NUCs, although those are 65W (the same as Intel's official brick) while this one is 80W. I'm not sure what that extra 15W will get you though, unless you jump into the Thin-ITX form factor, which is also supported.


The HDPLEX Nano ACDC 80W is available now for $32 USD at their website and Amazon.

Thanks FanlessTech.

Source: HDPLEX

HDPLEX H5 Is Fanless with Super Pipes

Subject: Cases and Cooling | February 11, 2015 - 08:30 AM |
Tagged: HDPLEX, h5, fanless

FanlessTech published a preview of the updated H5 case from HDPLEX, which accepts CPUs that are up to 90W TDP. That is a lot of potential performance for a silent device, especially since it includes an optional fanless heatsink for dual-slot graphics cards. That said, because the company creates home theater PCs (HTPCs), they have a reasonable amount of room to work with, unlike a NUC (or similar) form factor. It keeps the components cool by attaching them to the case itself with heat pipes, using its mass and surface area as a reservoir and radiator to keep the heat away. The CPU and GPU each have access to eight pipes, sixteen total.


Beyond the home theater application, I can see this being useful for many professionals, especially sound engineers, who want a lot of performance but no noise. And even though it is not tiny, it is not even a foot and a half at its largest dimension, so it should not be too difficult to find room for it in a cabinet or something. Also, just to put the 90W TDP into perspective, Devil's Canyon is listed at an 88W TDP. You could probably fit one of those in here, although non-trivial overclocking is likely out of the question.

So yeah, fanless Devil's Canyon with options for a fanless discrete GPU. I think I made my point.


This photo is from the previous model. The upcoming chassis is not yet pictured.

The final design is not yet published, which is why we included the picture of its previous incarnation, but HDPLEX claims that production is currently in the tooling phase. Despite not yet being available, it is listed to sell for $275 USD. If the previous design is any indication, it is quite stylish too. It could pass for a retail BluRay player if people don't stop and wonder why there isn't a brand logo on the front.

Source: HDPLEX

HDPLEX Introduces H3.TODD and H5.TODD Fanless Cases

Subject: Cases and Cooling | January 10, 2013 - 09:09 AM |
Tagged: htpc, HDPLEX, h5.todd, h3.todd, fanless

Custom case manufacture HDPLEX recently introduces two new fanless cases with the H3.TODD and H5.TODD. Both cases support mini-ITX motherboards and would blend well into your home AV rack. The fanless chassis are constructed of 6063T aluminum and come in powder coated black or brushed aluminum silver. The H3.TODD and H5.TODD are cases that also double as CPU heatsinks by way of copper heatpipes that carry heat away from the processor into the aluminum case. Both can support processors up to 75W TPDs without requiring fans.

Both the H3.TODD and H5.TODD are compatible with LGA 775, 1155, and 1156 Intel processors and AMD AM2, AM3, FM1, and FM2 chips. Further, the cases come with a single USB 3.0 port on the front. HDPLEX will also include a power supply and IR reciever with the cases for an additional fee.

H3TODD Case.jpg

The H3.TODD measures 325 x 298 x 60mm and weighs 12.5 lbs (5.5 kg). The case supports mini-ITX motherboards, 3.5” hard drives, and 12.7mm optical drives.

H3TODD Case (2).jpg

On the other hand, the H5.TODD is a wider case that can support both Mini-ITX and Micro-ATX form factor motherboards as well as a single full height PCI-E expansion card. The case measures 325 x 438 x 60mm and is a total of 16 lbs (7.5kg) by itself.

The H3.TODD is available for pre-order now for $248 while the H5.TODD is currently in stock for $275. Pre-orders for the H3.TODD should being shipping on January 25, 2013.

You can find more photos of the cases on the HDPLEX website.

Source: FanlessTech

Fancy a silent PC case with no work involved? The HDPLEX H3.SODD is for you

Subject: Cases and Cooling | May 24, 2011 - 04:17 PM |
Tagged: HDPLEX, silent, mITX

 Silent PC Review just met it's first so called 'silent' case that actually lives up to the name without needing user modification.  The HDPLEX H3.SODD is an mITX case which looks like a home theatre component or a fancy rack-mount case.  The inputs and outputs are hidden nicely as are the power button and slim DVD eject port.  The design should be cool enough to handle a CPU of about 85W TDP, the i3-2120 SPCR used had no problems which lead them to make that estimate on the cooling power. It is a little more expensive than some cases, coming in over $200, in this case it does seem you get what you pay for.


"The new H3.SODD media case for mini-ITX from HDPLEX is a more compact version of the H10 we examined a couple of months ago. This slim-line case performances and exudes high end chic despite its modest price tag. Our sample also manages to be the very first completely silent commercial computer SPCR has encountered after nine years of continuous operation."

Here are some more Cases & Cooling reviews from around the web: